Biamp Vidi 100 Data Sheet
Add to My manuals2 Pages
Biamp Vidi 100 is a 4K conferencing camera designed for huddle rooms and small conference rooms. It features a wide 120° field-of-view, ensuring everyone in the room is visible. With built-in microphones and noise-canceling algorithms, the Vidi 100 delivers clear audio, regardless of where participants are positioned.
advertisement
![Biamp Vidi 100 Data Sheet | Manualzz Biamp Vidi 100 Data Sheet | Manualzz](http://s2.manualzz.com/store/data/062124945_1-756630d5957e09ca4be3f856ef84ae72-360x466.png)
DATA SHEET
VIDI 100
4K CONFERENCING CAMERA
The Vidi 100 is a 4K camera for use with conferencing systems. Intended for huddle rooms or small conference rooms, the Vidi 100 has a 120° wide field-of-view, allowing everyone in the room to be seen. It can be table-mounted or attached to the room’s display. The Vidi 100 is also equipped with a microphone array and built-in noise cancelling algorithms to ensure everyone in the room is heard clearly, regardless of where they are sitting or standing.
FEATURES
• 4K video quality
• Wide 120° field-of-view with no distortion
• Built-in microphone array with two omni-directional microphones
• On-board signal processing for noise cancellation
• Supports wide dynamic range and low light conditions
• USB powered
• Covered by Biamp Systems’ three-year warranty
ARCHITECTS & ENGINEERS SPECIFICATIONS
The conferencing camera shall be designed to connect with conferencing systems. The conferencing camera shall be equipped with one USB 3.0 type B port The conferencing camera shall be able to transmit audio streams over USB via a USB Class 1 Audio device. The conferencing camera shall be equipped with one High-Definition Multimedia Interface
(HDMI®) port. The conferencing camera shall be capable of transmitting video signals of up to 3840 x 2160 resolution at 30 frames per second. The conferencing camera shall be equipped with a camera having a 120° field-of-view. The conferencing camera shall be equipped with two omni-directional microphones and integrated signal processing for noise cancellation. The conferencing camera shall be CE marked and compliant with the RoHS directive. Warranty shall be three years. The conferencing camera shall be the Vidi 100.
A: 9300 S.W. Gemini Drive Beaverton, OR 97008 USA T: +1 503.641.7287
W: www.biamp.com
VIDI 100 SPECIFICATIONS
Camera:
Image sensor:
Lens:
1/2.5”, CMOS,
progressive scan
Field-Of-View: 120°
Focus: 2.8mm
White Balance: Auto
Backlight Compensation: Supported
Digital Noise Reduction:
Signal Noise Ratio:
2D and 3D
> 55dB
Video:
Supported Resolutions: Up to 3840 x 2160p (30fps)
Connector: HDMI
USB:
Connector:
Bit Depth: 24-bit
Sample Rate:
USB 3.0 Type-B
48 kHz
Overall Dimensions:
Height:
Width:
Depth:
Weight:
1.7 inches (42 mm)
7.6 inches (194 mm)
1.3 inches (34 mm)
0.7 lbs (340 g)
Ambient Operating Temperature Range:
Compliance:
50-86° F (10-30° C)
CE Marked (Europe)
RoHS Directive (Europe)
Biamp and Vidi are either trademarks or registered trademarks of Biamp Systems, LLC in the United States and other countries. HDMI, HDMI High-Definition Multimedia Interface, and the HDMI logo are either trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. Other product names referenced may be trademarks or registered marks of their respective owners and Biamp Systems is not affiliated with or sponsored by these companies.
A: 9300 S.W. Gemini Drive Beaverton, OR 97008 USA T: +1 503.641.7287
W: www.biamp.com
VIDDS-1201-2111-EN-R1
advertisement
Key Features
- 4K video quality
- 120° field of view with no distortion
- Built-in microphone array with two omni-directional microphones
- On-board signal processing for noise cancellation
- USB powered