Datalogic QuickScanTM Lite QW2100 bar code reader Quick Reference Guide
Reklama
Reklama
深圳市信华翰科技有限公司
SHENZHEN XIN HUA HAN SCIENCE AND TECHNOLOGY CO.,LTD.
地址 : 深圳市福田区深南中路 3007 号国际科技大厦 11 楼
电话 :0755-83981612;0755-83981617 ; 传真 :0755-83558013
展销部 : 深圳市华强北赛格大厦 7106 室
网址： www.scanshop.cn
公司简介
深圳市信华翰科技有限公司成立于 2006 年，注册资金 500 万，办公室位于深圳市商业
中心，华强北商圈的国际科技大厦 11 楼，办公面积 320 平方。是 Honeywell 金牌代理
商、 Newland 新大陆金牌代理商、摩托罗拉讯宝 SYMBOL 战略合作伙伴、优尼泰克授权
服务商。我司共代理有十几个品牌的条码设备，为客户提供优质丰富的条码相关产品和系
统集成专业服务。
扫描网是深圳市信华翰科技有限公司斥资 100 万打造的扫描枪的网上商城。信华翰为
了让中国的条码事业走得更好更快，让大众都能享受条码带来的便利，特此为全国商户带
”
厂检测，到货检测，出货检测）的优良产品。
买扫描枪上扫描网！
服务热线：
400-609-8831 ins
PIRY
Honeywell
霍尼韦尔 1900GHD 二维码扫描枪
新大陆 HR1030 手持式扫描枪
北京意锐 RC532 二维码扫描平台
摩托罗拉 C11 一维扫描枪
合作伙伴
Honeywell
ins
PIRY
T S C
zebex
OPTICON
cino
QuickScan
TM
Lite QW2100
通用型有线手持线性成像条形码阅读器
General Purpose Corded
Handheld Linear Imager Bar Code Reader
快速参考指南
Quick Reference Guide
Datalogic Scanning, Inc.
959 Terry Street
Eugene, Oregon 97402
USA （美国）
电话：(541) 683-5700 传真：(541) 345-7140
未公开发行文档 — 保留所有权利。未经 Datalogic Scanning, Inc. 或其附属公司或联营公司
（“Datalogic” 或 “Datalogic Scanning”）事先书面许可，不得以任何形式或任何方式复制或
传播本文档的任何内容或其中所述程序。特此向 Datalogic 产品的所有者授予复制和传播本文档的
非独占性、可撤销性许可，用于买方自身内部的商业用途。买方不得删除或更改本文档包含的任
何所有权声明，包括版权声明，并应确保所有声明均出现在文档的副本中。如果本手册的未来修
订本将要出版，您可以联系 Datalogic 代表以获得印刷版本。电子版本可从 Datalogic 网站
(www.scanning.datalogic.com) 下载，或通过适当的媒介提供。如果您访问我们的网站，并想对本
文档或其他 Datalogic 出版物提出意见或建议，请通过 “ 联系 Datalogic” 页面让我们知晓。
免责声明
Datalogic 已要采取合理措施于本文档提供完整、准确的信息，但是 Datalogic 保留在不事先通知
的情况下随时更改任何规格的权利。Datalogic 和 Datalogic 标志是 Datalogic S.p.A. 在包括美国和
欧盟在内的很多国家或地区的注册商标。所有其他品牌和产品名称均是其相关所有者的商标。
Datalogic Scanning, Inc.
959 Terry Street
Eugene, Oregon 97402
USA
Telephone: (541) 683-5700
Fax: (541) 345-7140
An Unpublished Work - All rights reserved. No part of the contents of this documentation or the procedures described therein may be reproduced or transmitted in any form or by any means without prior written permission of Datalogic Scanning, Inc. or its subsidiaries or affiliates ("Datalogic" or “Datalogic
Scanning”). Owners of Datalogic products are hereby granted a non-exclusive, revocable license to reproduce and transmit this documentation for the purchaser's own internal business purposes. Purchaser shall not remove or alter any proprietary notices, including copyright notices, contained in this documentation and shall ensure that all notices appear on any reproductions of the documentation.
Should future revisions of this manual be published, you can acquire printed versions by contacting your Datalogic representative. Electronic versions may either be downloadable from the Datalogic website (www.scanning.datalogic.com) or provided on appropriate media. If you visit our website and would like to make comments or suggestions about this or other Datalogic publications, please let us know via the "Contact Datalogic" page.
Disclaimer
Datalogic has taken reasonable measures to provide information in this manual that is complete and accurate, however, Datalogic reserves the right to change any specification at any time without prior notice.
Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in many countries, including the U.S.A. and the E.U. All other brand and product names may be trademarks of their respective owners.
本产品包含以下一个或多个专利：
This product may be covered by one or more of the following patents: • EP1128315 • EP1396811• EP1413971 • EP895175 •
US5311000 • US5420410 • US5463211 • US5481098 • US5493108 • US5929421 • US6305606 • US6454168 • US6478224 •
US6561427 • US6758403 • US6808114 • US6834806 • US6997385 • US7387246 • US7506816 • Other Patents Pending
其他未决专利
语言
Language
中国 . . . . . . . . . . . . . . . . . . . . . . . . . . 1
English . . . . . . . . . . . . . . . . . . . . . . . 19
NOTES
中国
Datalogic Scanning, Inc.
QUICKSCAN(TM) 产品系列最终用户许可协议
最终用户通知：您获取的 Datalogic 产品包含产品运行不可或缺的内嵌式软件。本软件根据
许可向您提供，符合本协议的条款与条件。如果您使用 Datalogic 产品，您将被视为已接受
本协议的条款与条件。如果您不打算遵守本协议条款，Datalogic 将不愿将本软件的许可证发
给您，您可能无法使用 Datalogic 的产品或软件，有关说明，请务必与向其获得 Datalogic 产
品的一方联系。
本最终用户软件许可协议 （“ 协议 ”）是具有法律约束力的协议，用于管理 Datalogic
Scanning, Inc. 及其联营公司 （“Datalogic”）向已购买或已取得 Datalogic 产品的实体或个
人 （“ 最终用户 ”）提供本软件和文档的许可。对于本协议的目的，根据该许可协议的条
款将与单独的最终用户许可协议相关的任何软件授权给您。Datalogic 和最终用户同意以下条
款：
1. 定义。
1.1 “ 联营公司 ” 指控制 Datalogic S.p.A. 或受其控制，或受其共同控制的现在存在或以后
被收购的商业实体。
1.2 “ 文档 ” 指用户指南、程序参考指南、快速参考指南、手册等材料，或与 Datalogic 产
品关联或相关的类似材料，无论是印刷件、“ 在线 ” 或其他形式的材料。
1.3 “ 专有信息 ” 指：(a) 与软件相关的源代码、目标代码、软件、文档，以及任何相关的
内部设计、系统设计、数据基础设计、算法、技术、技术数据或信息、实现技术和与商
业秘密，(b) 适当标记或确定为专有机密的任何其他商业秘密，以及 (c) 在此情况下最终
用户应确认为机密的任何信息。专有信息不包括接收方可以 (1) 在公共领域，(2) 在接收
前接收方已经拥有或以正当方式知晓，(3) 在未违反任何其他专有权利的情况下以正当
方式从第三方知晓，或 (4) 在未使用专有信息的情况中下自主开发而构建的任何信息。
1.4 “Datalogic 产品 ” 指 DatalogicTM QuickscanTM 系列扫描器产品，包括与最终用户已
购买或已获得产品相关的所有嵌入式软件和所有文档，无论是从 Datalogic 直接获得，
还是间接获得。
1.5 “ 软件 ” 指以机器可读的形式嵌入从 Datalogic 直接或间接获得的 Datalogic 产品的
Datalogic 或其第三方许可者的任何软件或计算机程序，包括更换、更新、升级、增强
或修改。
2. 许可授予范围。
2.1 Datalogic 向最终用户授予非独占性、不可转让的永久性许可证，仅以机器可读形式使用
嵌入 Datalogic 产品 （“ 指定的 Datalogic 产品 ”）的软件，仅可用于最终用户的内部
商业用途。本协议不向最终用户转让软件的所有权。为软件加标题时应保留 Datalogic
或已从 Datalogic 获得许可权的第三方的名称。本协议所使用的 “ 购买 ” 或意义相同
的词语在应用于本软件时系指 “ 经许可获得 ”。最终用户无权接收或使用本软件的源
代码。
2.2 未经 Datalogic 事先书面允许，最终用户不得复制、更改、反编译、反汇编、反工程，或
者再现或再生产本软件，无论是已修改或未修改，也不得以本协议明确规定以外的目
的，向任何个人或组织销售、分配、发放从属许可证、分发、外借、出租、给予或转让
本软件。
3. 转让、支持。
3.1 在未指定的 Datalogic 产品中复制、安装、再现、再生产、反工程、以电子形式转让或其
他使用将严重违反本协议。然而，Datalogic 可能会选择不终止本协议或已授予的许可
证，但会通知最终用户，每次违反使用都会被视为已订购或已接受许可证。最终用户应
于违反之日按适用的目录价格向 Datalogic 支付此许可证的费用。
3.2 最终用户不得向任何第三方销售、分配、发放从属许可证、分发、外借、出租、给予或
转让逻辑数据产品，除非该第三方以书面形式向 Datalogic 保证遵守本协议的条款与条
件。缺少此类协议的 Datalogic 产品的转让应作废和无效。
3.3 在需要支持时，最终用户可以按 Datalogic 的标准支持费用和生效的 Datalogic 标准支持
条款与条件，获得 Datalogic 的软件支持。
4. 知识产权。
快速参考指南 1
最终用户承认本软件是 Datalogic 或 Datalogic 第三方许可者的宝贵商业秘密，并知悉本软件
受知识产权法律和条约的保护。本协议所列之许可不得向最终用户转让 Datalogic 或其第三
方许可者版权、专利、商标、服务标志、商业秘密的任何所有权或其他知识产权的权利，最
终用户亦无权采取任何法律行动获取此类权利。最终用户不应删除、修改 Datalogic 产品所
含的版权、商标、专利标志或其他知识财权通告，亦不得采取任何其他会模糊上述内容的行
动。
5. 专有信息。
5.1 最终用户承认专有信息为 Datalogic 和 Datalogic 第三方许可者的机密、私有及商业秘密
财产，最终用户无权获得任何专有信息，亦不享有任何利益。
5.2 最终用户不得向非最终用户已签订机密协议的授权雇员或代理人泄露、提供 Datalogic 或
其第三方许可者的专有信息，亦不得使他们能够使用这些信息，最终用户不得使用除专
为最终用户内部商业目的而结合使用 Datalogic 产品之外的专有信息。最终用户应采取
措施保护专有信息，不少于最终用户自有的知识财权的安全性。
5.3 此专有信息规定在本协议终止后的持续有效期为五 (5) 年。
6. 有限担保。
6.1 在正常使用和操作下，Datalogic 保证 Datalogic 产品将在文档指定期限内大体符合适用
的文档。在此期间，对于 Datalogic 已发出书面通知的所有反复性不符合性，Datalogic
将采取合理的商业手段努力弥补经 Datalogic 验证的不符合性。最终用户同意向
Datalogic 提供一切合理要求的信息和必要的协助，以帮助 Datalogic 纠正这类不符合
性。对于在保修期内报告给 Datalogic 所有的缺陷，Datalogic 仅限于按 Datalogic 的标
准协助惯例向最终用户提供一份更正或回复副本。Datalogic 不保证产品满足最终用户
的要求、使用产品不会中断或没有错误，也不保证 Datalogic 的补救方法能纠正任何不
符合性。本有限担保不包括遭损坏或滥用的任何产品，无论是有意、意外还是疏忽，或
未经授权维修或擅自安装的产品，如果最终用户修改产品、以本文档未规定的任何方式
使用产品，或如果最终用户违反了本协议的任何规定，担保均无效。
6.2 除本协议的规定以外，DATALOGIC 产品按 “ 原样 ” 提供，Datalogic 不做关于产品的
任何类型、明示或暗示、书面或口头担保，以及明确主张的特定用途之适销性和适用性
暗示担保。
7. 侵权。
7.1 在如下 Datalogic 产品侵犯美国专利或第三方版权的诉讼中，Datalogic 将就最终用户的
指控为自己辩护，如果 1) 最终用户立即以书面形式向 Datalogic 通知相关指控，2)
Datalogic 对指控的辩护或和解拥有决定权，和 3) 最终用户在辩护或和解中与 Datalogic
进行充分合作，那么，Datalogic 将支付指控中由具有司法管辖权的法院判定的最终用
户的损失金额，或支付由于指控最终用户承担的和解金额。所有指控通知均应传送至
Datalogic Scanning, Inc., Legal Department, 959 Terry Street, Eugene, OR 97402。
7.2 在此类指控的辩护或和解中，Datalogic 可以选择，1) 使最终用户有权继续使用
Datalogic 产品，2) 修改 Datalogic 产品使之不侵权，3) 采用不受指控的同类产品更换此
Datalogic 产品，或者 4) 向最终用户提供机会退还 Datalogic 产品并收取已支付购买价
格减去合理使用费用的退款。
7.3 对基于 1) 在与不是 Datalogic 提供或授权与 Datalogic 产品共用的情况下，使用的任何
Datalogic 产品，2) 使用已设计、生产或修改为最终用户规格的 Datalogic 产品，或者 3)
未经 Datalogic 书面授权，最终用户修改逻辑数据产品的侵权指控，Datalogic 不应向最
终用户承担任何责任。
7.4 上述内容阐述了 DATALOGIC 关于专利、版权或其他知识产权侵权指控的全部义务，取
消并取代了从前双方就此类指控达成的口头或书面协议，除非双方在将来的签署书面协
议中进行规定，否则，双方过去、现在或将来的口头或书面协议或处置均不会对其进行
修订或更改。
8. 责任限制。
除第 7 部分的规定外，DATALOGIC 对任何其他方对最终用户的任何指控概不负责。在任何
情况下，Datalogic 对损失 （若有，无论是根据合同、侵权 （包括过失）、产品责任、严格
责任、担保，还是任何其他依据）的责任，均不得超过最终用户对 DATALOGIC 产品支付的
价格或费用。在任何情况下，DATALOGIC 对最终用户或任何第三方的利润损失、数据丢失、
业务或服务中断，或任何其他特殊性、后果性、偶发性、间接性、意外性、惩罚性、惩戒性
2 QuickScan
TM
Lite QW2100
或其他类似损失概不负责，即使 DATALOGIC 已被告知有可能发生此类损害。
9. 美国政府限制权利；国际使用。
9.1 根据适用的美国联邦采购条例 FAR 52.227-14(g) 或 52.227-19，或技术数据与计算机软
件权利条款 DFARS 252.227-7013(c)(1)(ii) 之规定，对于自费开发的计算机软件，美国
政府使用、复制或披露软件会受到限制。
9.2 如果最终用户在美国以外使用 Datalogic 产品，则最终用户必须遵守 Datalogic 产品所使
用国家或地区的当地适用法律、美国出口管理法，以及本协议的英文版本。 “ 联合国国
际货物销售公约 ” 的规定不适用于本协议。
10. 协议终止。
10.1 如果另一方违反了本协议的任何规定，任何一方均可随时以书面通知的形式终止本协议
或按本协议授予的任何许可。
10.2 终止本协议后，最终用户应立即停止使用任何非嵌入式软件，并应返还至 Datalogic 或
销毁本协议涉及的所有非嵌入式软件，并应向 Datalogic 提供符合本规定的证明，该证
明应由最终用户的上级或授权代表署名。对于嵌入式软件，最终用户同意签署
Datalogic 起草的有关进一步使用嵌入式软件的弃权声明。在协议终止后，最终用户恢
复或继续使用嵌入式软件，表明最终用户同意在使用时遵守本协议的条款与条件。
11. 一般规定。
11.1 完整协议；修订。本文档包含双方就软件许可方面的全部协议，它取代了双方关于软件
许可的所有以前或现在的书面或口头协议。除非由 Datalogic 签署书面文件，否则不得
更改、修订或修改本协议。
11.2 通知。根据本协议要求或授权的所有通知应以书面形式提供，于收到时生效，并提供接
收凭证。向 Datalogic 发出的通知应传送至 Contract Administration, Datalogic
Scanning, Inc., 959 Terry Street, Eugene, OR 97402，或由 Datalogic 书面指定的其他地
址。
11.3 弃权声明。一方未能执行本协议的任何条款与条件也不应妨碍该方以后执行此条款与条
件。
11.4 管辖法律；审判地：本协议与下述各方权利应受美国俄勒冈州法律管制和解释，无需考
虑法律监管冲突的规则。位于摩特诺玛 (Multnomah) 或里县 (Lane) 的俄勒冈州的州或
联邦法院对有关本协议的所有事务均拥有专属管辖权，除 Datalogic 有权完全自行决定
是否在最终用户居住或其资产所在地的其他州、国家或地区的法院提起诉讼以外。
11.5 律师费。在强制执行本协议条款与条件的情况下，胜诉方有权支付审判或上诉时的合理
律师费。
- 结束 -
快速参考指南 3
软件产品政策
Datalogic 保留交付产品时附带提供软件 / 固件最新版本的权
利。这可以为我们的客户提供最新的 Datalogic 软件技术。
本政策唯一例外情况是，买方已与 Datalogic 签订合同，明确规
定更改交付给买方产品的软件 / 固件之条款与条件。
客户获得软件支持
选择同意 Datalogic 软件维护和支持协议的客户将得到 30 天预
先通知：(1) 发布新的软件版本；和 / 或 (2) 停止使用不再支持
的任何先前的软件版本。Datalogic 将提供收费维护，这将有助
于客户过渡到下一个软件版本。如果客户目前正在使用正被停
用的软件版本，根据所用的硬件，客户可以选择过渡到任何一
个较新的版本。
要达成软件维护和支持协议，请联系 Datalogic 销售人员。
免提支架 / 固定器
可用配件，能以方便的角度固定阅读器，允许
免提式扫描商品。它也可以用作固定器。按插
高支架臂，否则可能会损坏锁闭机构。固定器
“ 杯体 ” 可定位于三个角中的任意一个角，
如图所示。有关使用支架时阅读器编程的信
息，请参阅第
图 1. 调整支架
选件墙面安装
固定器
4 QuickScan
TM
Lite QW2100
1
连接 / 断开电缆
2
连接主机接口
Keyboard Wedge 接口
K ey bo ard
RS-232 接口
RS
-2
3
2
2
USB 接口
US
B
快速参考指南 5
3
一瞄即扫
012345 012345
65°
65°
6 QuickScan
TM
Lite QW2100
阅读器的部件
1
2
3
4
1. LED
2. 电缆释放孔
3. 扫描窗口
4. 扳机
条形码编程
为方便起见，本指南包括配置用于不同接口 （终端 / 主机）类
型阅读器所需的条形码编程信息。
有关编程和可配置功能的更多完整信息，请参见产品参考指南
(PRG)。您可以从本手册封底所列网站下载阅读器最新版本的
PRG 和其他可用出版物。
重置标准产品默认值
如果不确定阅读器中有哪些编程选项，或更改了某些选项但想
要恢复出厂设置，请扫描下列 “ 出厂默认设置 ” 条形码。此
操作可将当前活动接口的出厂配置复制到当前设置。
主机接口
出厂默认设置
注
视系统配置而定，电缆可能会有所
不同。
有些接口需要阅读器在接通电源时
于禁用状态下启动。如果需要在此
状态下进行其他阅读器配置，请扣
动扳机并按住 5 秒钟。阅读器将更
改为允许对条形码编程的状态。
快速参考指南 7
RS-232 接口
要使用 RS-232 接口，扫描所需 RS-232 主机类型的条形码。
选择 RS-232 Standard
选择 RS-232 Wincor Nixdorf
选择 RS-232 OPOS （用于 OPOS/UPOS/JavaPOS）
8 QuickScan
TM
Lite QW2100
USB 接口
阅读器直接连接到 USB 主机或已接通电源的 USB 集线器，并由
它供电。无需额外电源。使用 USB 接口时，阅读器自动检测
USB 并默认为 USB Keyboard 接口。
选择 USB-COM-STD
1
( 模拟 RS-232 标准接口）
选择 USB Keyboard （带标准键编码）
选择 USB Alternate Keyboard （带备用键编码）
选择 USB OEM
1.
从 www.datalogic.com 下载正确的 USB Com 驱动程序。
快速参考指南 9
Keyboard Wedge 接口
要使用 Keyboard Wedge 接口，扫描所需键盘类型的条形码。
选择 KBD-AT
（AT、PS/2 25-286、30-286、50、50Z、60、70、80、
90 和 95，带标准键编码）
选择 KBD-AT-NK
（IBM AT PS2，带标准键编码，但无外部键盘）
选择 KBD-AT-ALT
（AT、PS/2 25-286、30-286、50、50Z、60、70、80、
90 和 95，带备用键）
选择 KBD-AT-ALT-NK
（对于 IBM AT PS2，带备用键编码，但无外部键盘）
10
选择 KBD-XT （PC/XT，带标准键编码）
QuickScan
TM
Lite QW2100
扫描模式
如果更改了接口类型，扫描器配置会自动重
置为不同的扫描模式。
注
阅读器可以在这几种扫描模式下操作：
Trigger Single （扣动扳机一次） —
扣动扳机时，扫描启动，直至出现下
列操作之一：
- 可编程时长
1
已过
- 标签已读取
- 释放扳机
此模式与典型的手持式阅读器操作有关：扣动扳机时，扫描开
始且产品开始扫描，直至释放扳机、标签已读取或最大的可编
程时长
已过。
Trigger Hold Multiple （按住扳机多次） —
扣动扳机时，扫描开始且产品开
禁用扫描。双读超时
2
可防止在此模式下意外多次读取
Trigger Pulse Multiple （扳机脉冲多次） —
直至可编程时长
读超时
1
扣动并释放扳机时，扫描启动，
已过或再次扣动扳机转换为另一种状态。双
2
可防止在此模式下意外多次读取。
Flashing —
阅读器闪烁指示灯
3
亮起和熄灭与扳机状态无关。
Always On （始终开启） —
行中。双读超时
4
无需扣动扳机即可读取条形码。扫描持续进
可防止在此模式下意外多次读取。
Stand Mode （感应模式） —
无需扣动扳机即可读取条形码。将商品放
在阅读器的视野内时，扫描功能会自动开启。如果扣动扳机，
阅读器的操作就像在 Trigger Single 模式下一样。双读超时
防止在此模式下意外多次读取。
5
可
Trigger Object Sense （扳机物体感测） —
此模式与感应模式相似，除了要
激活解码器必须扣动扳机以外。
1.
有关更多可编程功能，请参见产品参考指南 (PRG)，在此情
形下：Scanning Active Time （扫描有效时间）。
2.
双读超时也使用 PRG 编程。
3.
受闪烁指示灯亮起时间和闪烁指示灯熄灭时间控制。使用
PRG 对这些选项进行编程。
4.
使用 PRG 对双读超时进行编程。
5.
使用 PRG 对双读超时进行编程。
快速参考指南 11
12
扫描模式 = 扣动扳机一次
扫描模式 = 按住扳机多次
扫描模式 = 扳机脉冲多次
扫描模式 = 闪烁
扫描模式 = 始终开启
扫描模式 = 感应模式
扫描模式 = 扳机物体感测
QuickScan
TM
Lite QW2100
故障排除
问题
扣动扳机时没有任
何反应。
LED 亮起，但条形
码未解码。
条形码读取能力已
经退化。
条形码已解码，但
未传送到主机。
可能的原因 可能的解决方法
阅读器无电。
检查系统电源。确保
已连接电源。
接口或电源电缆松
动。
确保所有电缆已牢固
连接。
确保对阅读器的编程
可读取已扫描的条形
码类型。
阅读器未对正确的
条形码类型编程。
有关更多信息，请参
阅产品参考指南
(PRG)。
条形码标签不可
读。
阅读器与条形码之
间的距离不正确。
检查标签，以确保它
未破损。尝试扫描另
一个条形码类型。
使阅读器靠近或远离
条形码。
扫描窗口变脏。
阅读器编程时未使
用正确的主机类
型。
使用柔软的无绒布沾
水清洁窗口。
扫描适当的主机类型
条形码。有关更多信
息，请参阅产品参考
指南 (PRG)。
注
对于故障排除的详情，请参阅
产品参考指南。
快速参考指南 13
LED 和蜂鸣器指示
阅读器的蜂鸣音和 LED 点亮表示阅读器的各种功能或出现错
误。“ 绿点 ” 也亮起表示有效读取。下表列出了这些指示。
上表所列操作的一个例外情况是，可对阅读器功能进行编程，
可以或不可打开。例如，接通电源蜂鸣音等某些指示可以使用
编程条形码标签来禁用。有关更详细的列表，请参阅 PRG。
指示
打开电源
有效读取
ROM 故障
读取扫描标签
受限
阅读器被禁用
LED 蜂鸣器
打开电源时 LED 闪烁，
但是这可能会太快而看
不到。使用 USB 接口
时，LED 会闪烁，直至
向主机列举过程结束。
打开电源时，阅读器
以最高频率和音量发
出哔音四次。
该指示的 LED 反应为可
使用 PRG 进行配置。
亮起 200 毫秒 / 熄灭
200 毫秒
不适用 (N/A)
成功扫描标签时，以
当前频率、音量、单
/ 双音设置和时长发
出哔音一次。
阅读器以最高音量发
出一次错误哔音，持
续 200 毫秒。
阅读器以最高频率和
当前音量发出 “ 啁
啾 ” 音六次。
LED 持续闪烁，亮起
100 毫秒 / 熄灭 900 毫
秒
不适用 (N/A)
14 QuickScan
TM
Lite QW2100
人体工程学建议
注意
为了避免或将人体工程学伤害的
潜在风险降至最低，请遵循以下
建议。请咨询您当地的健康与安
全管理人员，确保您遵守贵公司
的安全计划，以防止员工受伤。
・减少或避免重复动作
・保持一种自然的的姿势
・减少或避免用力过度
・将物体保留在最易触及的常用范围内
・在正确的高度执行任务
・减少或避免振动
・减少或避免直接压力
・提供可调节的工作台
・提供足够的间隙
・提供适宜的工作环境
・改进工作程序。
管制信息
所有机型的设计均遵循销售所在地的规则与规章，并按要求贴
上标签。未经 Datalogic 明确批准，对设备进行任何更改或修改
均会导致用户无权操作设备。
电源
对本产品和机型仅使用经 Datalogic 认可的电源。机型需要所列
II 类或 III 类限定电源 (LPS) 直接向阅读器供电。对于有效的安
全认证，III 类输入电源必须符合 IEC/EN60950-1 （EN 60335
系列，EN 60065 或相关）标准。
输入：100 - 240 伏交流电
最大电流：0.35 安培
输出：5 伏直流电
输出功率：12.5 瓦
注
对于 USB 掉电终端应用程序，
仅连接至 USB 1.0、1.1 或 2.0 主
机设备。
快速参考指南 15
射频干扰要求
Tested to comply with FCC Standards
FOR HOME OR OFFICE USE
根据 FCC 规则第 15 部分，本设备经过测试符
合 B 类数字设备的限制。这些限制旨在对住
宅安装提供合理的保护，防止有害干扰。本
设备可产生、使用并能发出射频能量，如果
未按说明书安装和使用，可能会对无线电通信造成有害干扰。
然而，在特定安装中不保证不会发生干扰。如果设备对无线电
或电视接收造成了有害干扰，可通过关闭和打开设备来确定，
我们鼓励用户采取下列一种或多种措施尝试纠正干扰：
・重新定向或定位接收天线。
・增加设备和接收器之间的距离。
・将设备连接至与接收器不在同一电路的插座上。
・向经销商或有经验的无线电 / 电视技术人员寻求帮
助。
注意
用户应注意，未经负责符合性
一方的明确批准，任何变更或
修改均会导致用户无权操作设
备。
射频干扰要求 — 加拿大
此 B 级数字装置符合加拿大 ICES-003 标准。
This Class B digital apparatus complies with Canadian IC-
ES-003.
Cet appareil numérique de la classe B est conforme à la norme
NMB-003 du Canada.
阅读器标签
此处所示标签仅用于说明其位置。有关实际细节，请查看产品
上的标签。
16 QuickScan
TM
Lite QW2100
担保
Datalogic 向客户保证，Datalogic 产品自发货之日起 3 年内，
在材料和工艺上无缺陷。
Datalogic Scanning 厂家有限担保书
担保范围
Datalogic Scanning （“Datalogic”）保证在正常和正确使用
的情况下，其硬件产品的材料和工艺没有缺陷。根据本担保
书，Datalogic 的责任限于，对本担保所涵盖的任何缺陷提供必
要的人工和零部件进行补救，并将产品恢复到正常使用条件。
在保修期内修理或更换产品不会延长原保修期限。产品按制造
时适用的规格进行销售，Datalogic 没有义务修改或更新售出的
产品。
如果 Datalogic 确定产品存在材料或工艺缺陷，Datalogic 可自
行决定在不收取额外零部件和人工费用的情况下修理或更换产
品，或及时将有缺陷的产品退还给 Datalogic 时退款。维修时，
Datalogic 可以使用经检测符合同等新材料及产品的适用规范的
全新或经修复的零部件、元件、组件或产品。客户允许
Datalogic 将从已维修产品中取下的所有零部件作为废弃材料进
行处置。对于 Datalogic 公布的购买时产品的保修期限 （保修
期），应从 Datalogic 装运之日后延。Datalogic 对维修后硬件
设备的修复组件工艺及材料缺陷提供 90 天的保修期，从
Datalogic 装运维修产品之日起或直至原保修期到期之前，以较
长者为准。对修理后装置的配置、数据和应用程序的维护、损
坏或丢失，Datalogic 既不保证，也不负责，并且能够自行决定
以 “ 出厂默认 ” 配置或维修时更新软件或固件后 （除非该固
件或软件已在产品制造过程中安装）送还装置。客户负责保留
软件和数据的备份副本。
担保索赔程序
为获得工厂保修服务，客户必须在适用的保修期到期之前将声
称的缺陷通知给 Datalogic，并从 Datalogic 获取返货至指定
Datalogic 维修中心的返货授权编号 (RMA)。如果 Datalogic 确
定客户的主张有效，Datalogic 将修理或更换产品，不收取额外
零部件和人工费用。客户应负责包装并将产品交付到指定的
Datalogic 维修中心，须预付运费。如果是运送到 Datalogic 维
修中心所在的国家或地区的某个位置，Datalogic 将支付将产品
送还至客户的运费。客户应负责为送还至其他位置的产品支付
所有运费、关税、税费和任何其他费用。不遵守适用的 RMA
政策可能会产生处理费用。对于 Datalogic 经自行判断确定无缺
陷或不符合保修规定的产品，客户应负责支付返还运费。
担保除外
Datalogic 工厂担保不适用于：
(i) 已损坏的产品，或由非 Datalogic 维修人员或其授权代表
修改、更改、修理或升级的任何产品；
(ii) 经 Datalogic 确定由错误操作、使用不当、滥用、误用、
磨损与损坏、疏忽、保管不当或使用未经 Datalogic 认可
或提供的零部件或附件而导致的任何所声称的缺陷、故障
或损坏；
(iii) 由将产品用于任何其他仪器、设备或器具导致的任何所声
称的缺陷或损坏；
快速参考指南 17
(iv) 由未能提供正当保养 （包括但不限于按照产品手册清洁上
方窗口）导致的任何所声称的缺陷或损坏；
(v) 由自然或人为灾难 （包括但不限于火灾、水灾、洪水、其
它自然灾害，可能造成内外元件损坏或整机、消耗性物件
损毁的恶意人为破坏或滥用事件）导致的任何故障或损坏
；
(vi) 由非恢复操作 （例如固件或软件升级、软件或硬件重新配
置等）导致的任何损坏或故障；
(vii) 由于刮痕、污渍或其他功能退化导致的更换上方窗口 / 外
壳，和 / 或
(viii) 任何消耗品或同等装置 （例如电缆、电源、电池、键盘、
触摸屏、扳机等）。
不得转让
除产品购买者或受让人以外，客户不得分配或转让本担保下的
权利或义务。任何违反本规定的试图分配或转让均无效，对
Datalogic 亦无约束力。DATALOGIC 的有限担保取代所有其他
明示或暗示、口头或书面、法定或包括但不限于任何特定用途
之适销性及适用性或未侵权的任何暗含担保。DATALOGIC 不
对由客户导致的上述产品更换或维修延误所遭受的任何损失承
担任何责任。本保修声明提出的补救措施是客户对担保索赔的
唯一和专用补救措施。在任何情况下，DATALOGIC 均不对客
户或任何第三方的任何利润损失、或任何意外性、后果性、间
接性、特殊性或偶发性损害承担任何责任，不论 DATALOGIC
是否事先通知发生此类损失的可能性。
损失风险
客户应对运输至 Datalogic 的产品承担损失或损坏风险。
Datalogic 应对 Datalogic 拥有产品承担损失或损坏风险。对送
还给客户的产品，在没有具体书面说明的情况下，Datalogic 将
选择运输公司，但是 Datalogic 不承担与送还运输相关的任何责
任。
18 QuickScan
TM
Lite QW2100
English
Datalogic Scanning, Inc.
QUICKSCAN
TM
PRODUCT SERIES END USER LICENSE AGREEMENT
Notice to End User: The Datalogic Product you have acquired contains embedded Software, which is integral to the product's operation. This Software is being provided to you under license, subject to the terms and conditions of this Agreement. If you use the Datalogic Product, you will be deemed to have accepted the terms and conditions of this Agreement. If you do not intend to be bound to the terms of this Agreement, Datalogic is not willing to license the Software to you, you may not use the Datalogic Product or the Software, and you must contact the party from whom you acquired the Datalogic Product for instructions.
This End User Software License Agreement ("Agreement") is a legally binding agreement governing the licensing of the Software and Documentation by Datalogic Scanning, Inc. and its Affiliates ("Datalogic") to the entity or person who has purchased or otherwise acquired a Datalogic Product ("End
User"). For purposes of this Agreement, any software that is associated with a separate end-user license agreement is licensed to you under the terms of that license agreement. Datalogic and End
User hereby agree as follows:
1. Definitions.
1.1 "Affiliate" means a business entity currently existing or later acquired that controls, is controlled by, or is under common control with Datalogic S.p.A.
1.2 "Documentation" means materials such as user's guides, program reference guides, quick reference guides, manuals, or similar materials associated with or related to the Datalogic Product, whether in printed, "online", or other form.
1.3 "Proprietary Information" means: (a) source code, object code, software, documentation, and any related internal design, system design, data base design, algorithms, technology, technical data or information, implementation techniques, and trade secrets related to the Software, (b) any other trade secrets marked appropriately or identified as proprietary or confidential, and (c) any information that End User, under the circumstances, should recognize as confidential. Proprietary Information does not include any information that the receiving party can establish was (1) in the public domain, (2) already in the receiving party's possession or rightfully known prior to receipt, (3) rightfully learned from a third party not in violation of any other's proprietary rights, or (4) independently developed without access to Proprietary Information.
1.4 "Datalogic Product" means the Datalogic
TM
Quickscan
TM
series scanner product, including all embedded Software in and all Documentation related to such product, which has been purchased or otherwise acquired by End User, whether obtained directly or indirectly from Datalogic.
1.5 "Software" means any software or computer programs of Datalogic or its third party licensors in machine readable form which is embedded in the Datalogic Product, whether obtained directly or indirectly from Datalogic, including any replacement, update, upgrade, enhancement or modification.
2. Scope Of License Granted.
2.1 Datalogic grants to End User a non-exclusive, non-transferable, perpetual license to use the Software, solely on the Datalogic Product in which it is embedded ("designated Datalogic Product"), in machine-readable form only, solely for End User's internal business purposes. This Agreement does not convey ownership of the Software to End User. Title to the Software shall be and remain with
Datalogic or the third party from whom Datalogic has obtained a licensed right. As used in this
Agreement, the term "purchase" or its equivalents when applied to the Software shall mean "acquire under license." End User is not entitled to receipt or use of the source code to any Software.
2.2 End User shall not copy, modify, decompile, disassemble, reverse engineer, or otherwise reproduce or remanufacture the Software, whether modified or unmodified, nor sell, assign, sublicense, distribute, lend, rent, give, or otherwise transfer the Software to any other person or organization, for purposes other than as expressly provided in this Agreement, without Datalogic's prior written consent.
3. Transfers, Support.
3.1 Any copying, installing, reproduction, remanufacture, reverse engineering, electronic transfer, or other use of the Software on other than the designated Datalogic Product will be a material breach of this Agreement. However, Datalogic may elect not to terminate this Agreement or the granted licenses, but instead may elect to notify End User that End User is deemed to have ordered and accepted a license for each breaching use. End User shall pay Datalogic the applicable list price for such licenses as of the date of such breach.
3.2 End User shall not sell, assign, sublicense, distribute, lend, rent, give, or otherwise transfer the Datalogic Product to any third party unless such third party agrees with Datalogic in writing to be bound by the terms and conditions of this Agreement. Any such transfer of the Datalogic Product absent such agreement shall be null and void.
3.3 End User may obtain support for Software from Datalogic at Datalogic's standard support fees and under Datalogic's standard support terms and conditions in effect at the time the support is requested.
4. Intellectual Property.
End User acknowledges that the Software constitutes valuable trade secrets of Datalogic or Datalogic's third party licensors and that the Software is protected by intellectual property laws and
Quick Reference Guide 19
treaties. The license set forth in this Agreement does not transfer to End User any ownership of Datalogic's or its third party licensors' copyrights, patents, trademarks, service marks, trade secrets, or other intellectual property rights and End User shall have no right to commence any legal actions to obtain such rights. End User shall not remove, modify, or take any other action that would obscure any copyright, trademark, patent marking, or other intellectual property notices contained in or on the Datalogic Product.
5. Proprietary Information.
5.1 End User acknowledges that Proprietary Information is the confidential, proprietary, and trade secret property of Datalogic and Datalogic's third party licensors and End User acquires no right or interest in any Proprietary Information.
5.2 End User shall not disclose, provide, or otherwise make available the Proprietary Information of
Datalogic or its third party licensors to any person other than End User's authorized employees or agents who are under confidentiality agreement, and End User shall not use the Proprietary Information other than in conjunction with use of the Datalogic Product exclusively for End User's internal business purposes. End User shall take steps to protect the Proprietary Information no less securely than if it were End User's own intellectual property.
5.3 The provisions of this Proprietary Information Section shall survive and continue for five (5) years after the termination of this Agreement.
6. Limited Warranty.
6.1 Datalogic warrants that, under normal use and operation, the Datalogic Product will conform substantially to the applicable Documentation for the period specified in the Documentation. During this period, for all reproducible nonconformities for which Datalogic has been given written notice,
Datalogic will use commercially reasonable efforts to remedy nonconformities verified by Datalogic.
End User agrees to supply Datalogic with all reasonably requested information and assistance necessary to help Datalogic in remedying such nonconformities. For all defects reported to Datalogic within the warranty period, Datalogic's liability is limited to providing End User with one copy of corrections or responding to End User's problem reports according to Datalogic's standard assistance practices. Datalogic does not warrant that the product will meet End User's requirements or that use of the product will be uninterrupted or error free, or that Datalogic's remedial efforts will correct any nonconformance. This limited warranty does not cover any product that have been subjected to damage or abuse, whether intentionally, accidentally, or by neglect, or to unauthorized repair or unauthorized installation, and shall be void if End User modifies the product, uses the product in any manner other than as established in the Documentation, or if End User breaches any of the provisions of this Agreement.
6.2 EXCEPT AS PROVIDED IN THIS AGREEMENT, THE DATALOGIC PRODUCT IS PRO-
VIDED "AS IS" AND DATALOGIC MAKES NO WARRANTIES OF ANY KIND, EXPRESS
OR IMPLIED, WRITTEN OR ORAL, WITH RESPECT TO THE PRODUCT, AND SPECIF-
ICALLY DISCLAIMS THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FIT-
NESS FOR A PARTICULAR PURPOSE.
7. Infringement.
7.1 Datalogic will defend End User against any claim in a lawsuit that the Datalogic Product furnished hereunder infringe a United States patent or copyright of a third party and Datalogic will pay any damages finally awarded against End User by a court of competent jurisdiction that are attributable to such claim or will pay End User's part of any settlement that is attributable to such claim, provided, that 1) End User notifies Datalogic promptly in writing of the claim, 2) Datalogic controls the defense or settlement of the claim, and 3) End User cooperates fully with Datalogic in such defense or settlement. All notices of a claim should be sent to Datalogic Scanning, Inc., Legal
Department, 959 Terry Street, Eugene, OR 97402.
7.2 In the defense or settlement of any such claim, Datalogic may, at its option, 1) procure for End User the right to continue using the Datalogic Product, 2) modify the Datalogic Product so that it becomes non-infringing, 3) replace the Datalogic Product with an equivalent product not subject to such claim, or 4) provide End User an opportunity to return the Datalogic Product and receive a refund of the purchase price paid, less a reasonable allowance for use.
7.3 Datalogic shall have no liability to End User for claims of infringement based upon 1) the use of any
Datalogic Product in combination with any product which Datalogic has not either furnished or authorized for use with such Datalogic Product 2) the use of any Datalogic Product designed, manufactured, or modified to the specifications of End User, or 3) End User's modification of the Datalogic Product without written authorization from Datalogic.
7.4 THE FOREGOING STATES DATALOGIC'S COMPLETE AND ENTIRE OBLIGATION
CONCERNING CLAIMS OF PATENT, COPYRIGHT, OR OTHER INTELLECTUAL
PROPERTY INFRINGEMENT, CANCELS AND SUPERCEDES ANY PRIOR AGREE-
MENTS, WHETHER ORAL OR WRITTEN, BETWEEN THE PARTIES CONCERNING
SUCH CLAIMS, AND WILL NOT BE MODIFIED OR AMENDED BY ANY PAST, CON-
TEMPORANEOUS, OR FUTURE AGREEMENTS OR DEALINGS BETWEEN THE PAR-
TIES, WHETHER ORAL OR WRITTEN, EXCEPT AS SET FORTH IN A FUTURE
WRITING SIGNED BY BOTH PARTIES.
20 QuickScan
TM
Lite QW2100
8. Limitation Of Liability.
EXCEPT AS PROVIDED IN SECTION 7, DATALOGIC SHALL NOT BE LIABLE FOR ANY CLAIMS AGAINST
END USER BY ANY OTHER PARTY. IN NO EVENT SHALL DATALOGIC'S LIABILITY FOR DAMAGES, IF
ANY, WHETHER BASED UPON CONTRACT, TORT (INCLUDING NEGLIGENCE), PRODUCT LIABILITY,
STRICT LIABILITY, WARRANTY, OR ANY OTHER BASIS, EXCEED THE PRICE OR FEE PAID BY END USER
FOR THE DATALOGIC PRODUCT. UNDER NO CIRCUMSTANCES SHALL DATALOGIC BE LIABLE TO
END USER OR ANY THIRD PARTY FOR LOST PROFITS, LOST DATA, INTERRUPTION OF BUSINESS OR
SERVICE, OR FOR ANY OTHER SPECIAL, CONSEQUENTIAL, CONTINGENT, INDIRECT, INCIDENTAL,
PUNITIVE, EXEMPLARY, OR OTHER SIMILAR DAMAGES, EVEN IF DATALOGIC HAS BEEN ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES.
9. Government Restricted Rights; International Use.
9.1 Use, duplication, or disclosure of the Software by the U.S. Government is subject to the restrictions for computer software developed at private expense as set forth in the U.S. Federal Acquisition Regulations at FAR 52.227-14(g), or 52.227-19 or in the Rights in Technical Data and Computer Software clause at DFARS 252.227-7013(c)(1)(ii), whichever is applicable.
9.2 If End User is using the Datalogic Product outside of the United States, End User must comply with the applicable local laws of the country in which the Datalogic Product is used, with U.S. export control laws, and with the English language version of this Agreement. The provisions of the
"United Nations Convention on International Sale of Goods" shall not apply to this Agreement.
10. Termination.
10.1 Either party may terminate this Agreement or any license granted under this Agreement at any time upon written notice if the other party breaches any provision of this Agreement.
10.2 Upon termination of this Agreement, End User immediately shall cease using any nonembedded software and shall return to Datalogic or destroy all non-embedded software covered by this Agreement, and shall furnish Datalogic with a certificate of compliance with this provision signed by an officer or authorized representative of End User. For embedded software, End User agrees to sign a waiver prepared by Datalogic concerning further use of the embedded Software. End User's resumed or continued use of the embedded Software after termination shall constitute End User's agreement to be bound by the terms and conditions of this Agreement for such use.
11. General Provisions.
11.1 Entire Agreement; Amendment. This document contains the entire agreement between the parties relating to the licensing of the Software and supersedes all prior or contemporaneous agreements, written or oral, between the parties concerning the licensing of the Software. This Agreement may not be changed, amended, or modified except by written document signed by Datalogic.
11.2 Notice. All notices required or authorized under this Agreement shall be given in writing, and shall be effective when received, with evidence of receipt. Notices to Datalogic shall be sent to the attention of Contract Administration, Datalogic Scanning, Inc., 959 Terry Street, Eugene, OR 97402, or such other address as may be specified by Datalogic in writing.
11.3 Waiver. A party's failure to enforce any of the terms and conditions of this Agreement shall not prevent the party's later enforcement of such terms and conditions.
11.4 Governing Law; Venue: This Agreement and the rights of the parties hereunder shall be governed by and construed in accordance with the laws of the State of Oregon U.S.A, without regard to the rules governing conflicts of law. The state or federal courts of the State of Oregon located in either Multnomah or Lane counties shall have exclusive jurisdiction over all matters regarding this Agreement, except that Datalogic shall have the right, at its absolute discretion, to initiate proceedings in the courts of any other state, country, or territory in which End User resides, or in which any of End
User's assets are located.
11.5 Attorneys' Fees. In the event an action is brought to enforce the terms and conditions of this Agreement, the prevailing party shall be entitled to reasonable attorneys' fees, both at trial and on appeal.
- END -
Quick Reference Guide 21
Software Product Policy
Datalogic reserves the right to ship its products with the latest version of software/firmware available. This provides our customers with the very latest in Datalogic software technology.
The only exception to this policy is when the buyer has a signed contract with Datalogic that clearly defines the terms and conditions for making software/firmware changes in products shipped to the buyer.
Customers Under Software Support
Customers that elect to subscribe to Datalogic Software Maintenance and Support Agreement will receive 30 days advance notification of: (1) the release of a new software version; and/or
(2) discontinuation of any prior software version that will no longer be supported. Datalogic will provide maintenance for a fee that will assist customers in transitioning to the next software version. If a customer is currently using the software version being discontinued, the customer may elect to transition to any one of the newer versions, depending on the hardware in use.
To arrange for a Software Maintenance and Support Agreement please contact your Datalogic sales person.
Hands Free Stand/Holder
Optional Wall
An accessory is available which holds the reader at a convenient angle, allowing hands free scanning of items. It can also be used as a holder.
Always press in on the release buttons on both sides of the stand to raise the arm of the stand as shown in the inset of
you could damage the locking mechanism.
The holder “cup” can be positioned in any of
Mount Holder the three angles shown in the figure.
Refer to
about programming the reader for use with the stand.
22 QuickScan
TM
Lite QW2100
Hands Free Stand/Holder
Figure 1. Adjusting the Stand
Quick Reference Guide 23
1
Connect/Disconnect Cable
2
Connect Host Interface
Keyboard Wedge Interface
K ey bo ard
RS-232 Interface
RS
-2
3
2
2
USB Interface
24
US
B
QuickScan
TM
Lite QW2100
Aim and Scan
3
Aim and Scan
012345 012345
65°
65°
Quick Reference Guide 25
Parts of the Reader
1
2
1. LED
2. Cable Release Hole
3. Scan Window
4. Trigger
3
4
26 QuickScan
TM
Lite QW2100
Programming Bar Codes
Programming Bar Codes
For your convenience, this guide includes the programming bar codes required to configure the reader for use with different interface (terminal/host) types.
See the Product Reference Guide (PRG) for more complete information about programming and configurable features. You can download the latest version of the PRG and any other available publications for the reader from the website listed on the back cover of this manual.
Resetting the Standard Product Defaults
If you aren’t sure what programming options are in your reader, or you’ve changed some options and want the factory settings restored, scan the Factory Default Settings bar code below. This will copy the factory configuration for the currently active interface to the current configuration.
Factory Default Settings
Host Interfaces
NOTE
Cables may vary depending upon system configuration.
Some interfaces require the reader to start in the disabled state when powered on. If additional reader configuration is desired while in this state, pull the trigger and hold it for five seconds.
The reader will change to a state that allows programming with bar codes.
Quick Reference Guide 27
RS-232 Interface
To use an RS-232 interface, scan the bar code for the desired
RS-232 host type.
Select RS-232 Standard
Select RS-232 Wincor Nixdorf
Select RS-232 OPOS (for use with OPOS/UPOS/JavaPOS)
28 QuickScan
TM
Lite QW2100
Programming Bar Codes
USB Interface
The reader attaches directly to a USB host, or a powered USB hub, and is powered by it. No additional power supply is required. When using a USB interface, the reader auto-detects the USB and defaults to the USB Keyboard interface.
Select USB-COM-STD
1
(simulates RS-232 standard interface)
Select USB Keyboard (with standard key encoding)
Select USB Alternate Keyboard (with alternate key encoding)
Select USB OEM
1.
Download the correct USB Com driver from www.datalogic.com.
Quick Reference Guide 29
Keyboard Wedge Interface
To use a Keyboard Wedge interface, scan the bar code for the desired keyboard type.
Select KBD-AT
(AT, PS/2 25-286, 30-286, 50, 50Z, 60, 70, 80, 90 & 95 w/Standard Key Encoding)
Select KBD-AT-NK
(IBM AT PS2 with standard key encoding but without external kbd.)
Select KBD-AT-ALT
(AT, PS/2 25-286, 30-286, 50, 50Z, 60, 70, 80, 90 & 95 w/Alternate Key)
Select KBD-AT-ALT-NK (for IBM AT PS2 with alternate key encoding but without external keyboard)
30
Select KBD-XT (PC/XT w/Standard Key Encoding)
QuickScan
TM
Lite QW2100
Scanning Modes
Scanning Modes
NOTE
If the interface type is changed, scanner configuration may be automatically reset to a different
Scanning Mode.
The reader can operate in one of several scanning modes:
Trigger Single —
When the trigger is pulled, scanning is activated until one of the following occurs:
- a programmable duration
1
has elapsed
- a label has been read
- the trigger is released
This mode is associated with typical handheld reader operation: when the trigger is pulled, scanning starts and the product scans until the trigger is released, or a label is read, or the maximum programmable duration
has elapsed.
Trigger Hold Multiple —
When the trigger is pulled, scanning starts and the product scans until the trigger is released or a program-
has elapsed. Reading a label does not disable
scanning. Double Read Timeout
2 reads while in this mode.
prevents undesired multiple
Trigger Pulse Multiple —
When the trigger is pulled and released, scanning is activated until programmable duration or the trigger has been pulled again to transition to another state. Double Read Timeout while in this mode.
has elapsed
prevents undesired multiple reads
Flashing —
The reader flashes status.
3
on and off regardless of the trigger
Always On —
No trigger pull is required to read a bar code. Scanning is continually on. Double Read Timeout sired multiple reads while in this mode.
4
prevents unde-
Stand Mode —
No trigger pull is required to read a bar code. Scanning is turned on automatically when an item is placed in reader’s field of view. If the trigger is pulled, the reader acts as if it
5 desired multiple reads while in this mode.
prevents un-
1.
See the Product Reference Guide (PRG) for additional programmable features, in this case: Scanning Active Time.
2.
Double Read Timeout is also programmed using the PRG.
3.
Controlled by Flash On Time and Flash Off Time. Use the PRG to program these options.
4.
Double Read Timeout is programmed using the PRG.
5.
Double Read Timeout is programmed using the PRG.
Quick Reference Guide 31
Trigger Object Sense —
, except that a trigger pull is required to activate the decoder.
Scan Mode = Trigger Single
Scan Mode = Trigger Hold Multiple
Scan Mode = Trigger Pulse Multiple
Scan Mode = Flashing
Scan Mode = Always On
Scan Mode = Stand Mode
32
Scan Mode = Trigger Object Sense
QuickScan
TM
Lite QW2100
Troubleshooting
Troubleshooting
Problem
Nothing happens when the trigger is pulled.
LED comes on, but bar code does not decode.
Possible Cause
No power to the reader.
Interface or power cables are loose.
Reader not programmed for correct bar code type.
Bar code label is unreadable.
Possible Solutions
Check system power.
Ensure power supply is connected.
Ensure all cable connections are secure.
Ensure reader is programmed to read the type of bar code scanned.
Refer to the Product Reference Guide (PRG) for more information.
Check the label to ensure it is not defaced. Try scanning another bar code type.
Bar code reading ability has degraded.
Bar code is decoded but not transmitted to the host.
Distance between reader and bar code is incorrect.
Move reader closer to or further from the bar code.
Scan Window has become dirty.
Reader not programmed for the correct host type.
Clean window using a soft, lint-free cloth dampened with water.
Scan the appropriate host type bar code. Refer to the
Product Reference Guide
(PRG) for more information.
NOTE
For detailed troubleshooting, refer to the Product Reference Guide.
Quick Reference Guide 33
LED and Beeper Indications
The reader’s beeper sounds and its LED illuminates to indicate various functions or errors on the reader. A “Green Spot” also lights to indicate a good read. The tables below list these indications. One exception to the behaviors listed in the tables is that the reader’s functions are programmable, and may or may not be turned on. For example, certain indications, such as the power-up beep can be disabled using programming bar code labels. Reference the PRG for a more detailed list.
Indication
Power-up
Good Read
ROM Failure
Limited Scanning
Label Read
Reader Disabled
LED Beeper
LED flashes/blinks on power-up, however, this may be too rapid to view. With a
USB interface, the LED blinks until enumeration with the host is completed.
Reader beeps four times at highest frequency and volume upon power-up.
LED behavior for this indication is configurable using the
PRG.
One beep at current frequency, volume, mono/bi-tonal setting and duration upon a successful label scan.
200ms on / 200ms off
N/A
Reader sounds one error beep at highest volume for 200 mS.
Reader 'chirps' six times at the highest frequency and current volume.
The LED blinks continuously
100mS on / 900 mS off
N/A
34 QuickScan
TM
Lite QW2100
Ergonomic Recommendations
Ergonomic Recommendations
CAUTION
In order to avoid or minimize the potential risk of ergonomic injury follow the recommendations below.
Consult with your local Health &
Safety Manager to ensure that you are adhering to your company’s safety programs to prevent employee injury.
• Reduce or eliminate repetitive motion
• Maintain a natural position
• Reduce or eliminate excessive force
• Keep objects that are used frequently within easy reach
• Perform tasks at correct heights
• Reduce or eliminate vibration
• Reduce or eliminate direct pressure
• Provide adjustable workstations
• Provide adequate clearance
• Provide a suitable working environment
• Improve work procedures.
Regulatory Information
All models are designed to be compliant with rules and regulations in locations they are sold and will be labeled as required.
Any changes or modifications to equipment, not expressly approved by Datalogic could void the user's authority to operate the equipment.
Power Supply
Use only a power supply approved by Datalogic for this product and model. Models require either a Listed class II or class
III with a Limited Power Source(LPS) which supplies power directly to the reader. For the safety certification to be valid, class
III input power sources must be IEC/EN60950-1 (EN
60335-series, EN 60065 or relevant) approved.
Input: 100 - 240 VAC Output: 5 VDC
Max Current: 0.35 Amps Power Out: 12.5 Watts
NOTE
For USB Power Off Terminal applications, attach to USB 1.0, 1.1 or
2.0 host device only.
Quick Reference Guide 35
Radio Frequency Interference Requirements
Tested to comply with FCC Standards
FOR HOME OR OFFICE USE
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However there is no guarantee that interference will not occur in a particular installation. If the equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Re-orient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAUTION
The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Radio Frequency Interference Requirements - Canada
This Class B digital apparatus complies with Canadian IC-
ES-003.
Cet appareil numérique de la classe B est conforme à la norme
NMB-003 du Canada.
Reader Labeling
The label is shown here to illustrate its location only. Please view the labels on your product for actual details.
36 QuickScan
TM
Lite QW2100
Reader Labeling
Warranty
Datalogic warrants to Customer that Datalogic's products will be free from defects in materials and workmanship for a period of 3 years from product shipment.
Datalogic Scanning Limited Factory Warranty
Warranty Coverage
Datalogic Scanning (“Datalogic”) hardware products are warranted against defects in material and workmanship under normal and proper use. The liability of Datalogic under this warranty is limited to furnishing the labor and parts necessary to remedy any defect covered by this warranty and restore the product to its normal operating condition. Repair or replacement of product during the warranty does not extend the original warranty term. Products are sold on the basis of specifications applicable at the time of manufacture and Datalogic has no obligation to modify or update products once sold.
If Datalogic determines that a product has defects in material or workmanship, Datalogic shall, at its sole option repair or replace the product without additional charge for parts and labor, or credit or refund the defective products duly returned to Datalogic. To perform repairs, Datalogic may use new or reconditioned parts, components, subassemblies or products that have been tested as meeting applicable specifications for equivalent new material and products. Customer will allow Datalogic to scrap all parts removed from the repaired product. The warranty period shall extend from the date of shipment from Datalogic for the duration published by Datalogic for the product at the time of purchase (Warranty period). Datalogic warrants repaired hardware devices against defects in workmanship and materials on the repaired assembly for a 90 day period starting from the date of shipment of the repaired product from Datalogic or until the expiration of the original warranty period, whichever is longer. Datalogic does not guarantee, and it is not responsible for, the maintenance of, damage to, or loss of configurations, data, and applications on the repaired units and at its sole discretion can return the units in the “factory default” configuration or with any software or firmware update available at the time of the repair (other than the firmware or software installed during the manufacture of the product). Customer accepts responsibility to maintain a back up copy of its software and data.
Warranty Claims Process
In order to obtain service under the Factory Warranty, Customer must notify Datalogic of the claimed defect before the expiration of the applicable Warranty period and obtain from Datalogic a return authorization number (RMA) for return of the product to a designated Datalogic service center. If Datalogic determines Customer’s claim is valid, Datalogic will repair or replace product without additional charge for parts and labor. Customer shall be responsible for packaging and shipping the product to the designated Datalogic service center, with shipping charges prepaid. Datalogic shall pay for the return of the product to Customer if the shipment is to a location within the country in which the Datalogic service center is located. Customer shall be responsible for paying all shipping charges, duties, taxes, and any other charges for products returned to any other locations. Failure to follow the applicable
RMA policy, may result in a processing fee. Customer shall be responsible for return shipment expenses for products which Datalogic, at its sole discretion, determines are not defective or eligible for warranty repair.
Warranty Exclusions
The Datalogic Factory Warranty shall not apply to:
(i) any product which has been damaged, modified, altered, repaired or upgraded by other than Datalogic service personnel or its authorized representatives;
(ii) any claimed defect, failure or damage which Datalogic determines was caused by faulty operations, improper use, abuse, misuse, wear and tear, negligence, improper storage or use of parts or accessories not approved or supplied by Datalogic;
(iii) any claimed defect or damage caused by the use of product with any other instrument, equipment or apparatus;
(iv) any claimed defect or damage caused by the failure to provide proper maintenance, including but not limited to cleaning the upper window in accordance with product manual;
Quick Reference Guide 37
(v) any defect or damage caused by natural or man-made disaster such as but not limited to fire, water damage, floods, other natural disasters, vandalism or abusive events that would cause internal and external component damage or destruction of the whole unit, consumable items;
(vi) any damage or malfunctioning caused by non-restoring action as for example firmware or software upgrades, software or hardware reconfigurations etc.;
(vii) the replacement of upper window/cartridge due to scratching, stains or other degradation and/or
(viii) any consumable or equivalent (e.g., cables, power supply, batteries, keypads, touch screen, triggers etc.).
No Assignment
Customer may not assign or otherwise transfer its rights or obligations under this warranty except to a purchaser or transferee of product. No attempted assignment or transfer in violation of this provision shall be valid or binding upon Datalogic.
DATALOGIC'S LIMITED WARRANTY IS IN LIEU OF ALL OTHER WAR-
RANTIES, EXPRESS OR IMPLIED, ORAL OR WRITTEN, STATUTORY OR
OTHERWISE, INCLUDING, WITHOUT LIMITATION, ANY IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE, OR NONINFRINGEMENT. DATALOGIC SHALL NOT BE LIA-
BLE FOR ANY DAMAGES SUSTAINED BY CUSTOMER ARISING FROM
DELAYS IN THE REPLACEMENT OR REPAIR OF PRODUCTS UNDER
THE ABOVE. THE REMEDY SET FORTH IN THIS WARRANTY STATE-
MENT IS THE CUSTOMER’S SOLE AND EXCLUSIVE REMEDY FOR
WARRANTY CLAIMS. UNDER NO CIRCUMSTANCES WILL DATALOG-
IC BE LIABLE TO CUSTOMER OR ANY THIRD PARTY FOR ANY LOST
PROFITS, OR ANY INCIDENTAL, CONSEQUENTIAL IN-DIRECT, SPE-
CIAL OR CONTINGENT DAMAGES REGARDLESS OF WHETHER DAT-
ALOGIC HAD ADVANCE NOTICE OF THE POSSIBILITY OF SUCH
DAMAGES.
Risk of Loss
Customer shall bear risk of loss or damage for product in transit to Datalogic. Datalogic shall assume risk of loss or damage for product in Datalogic’s possession. In the absence of specific written instructions for the return of product to Customer,
Datalogic will select the carrier, but Datalogic shall not thereby assume any liability in connection with the return shipment.
38 QuickScan
TM
Lite QW2100
DECLARATION OF CONFORMITY
EC-67
Rev.: 0
Pag.: 1 di 1
11
Datalogic Scanning, Inc.
959 Terry St.
Eugene, OR 97402
USA
dichiara che declares that the déclare que le bescheinigt, daß das Gerät declara que el
声明
QuickScan Lite QW2100 Bar Code Reader
e tutti i suoi modelli and all its models et tous ses modèles und seine Modelle y todos sus modelos
及其所有机型
sono conformi alle Direttive del Consiglio Europeo sottoelencate: are in conformity with the requirements of the European Council Directives listed below: sont conformes aux spécifications des Directives de l'Union Européenne ci-dessous: den nachstehenden angeführten Direktiven des Europäischen Rats: cumple con los requisitos de las Directivas del Consejo Europeo, según la lista siguiente:
均符合下列欧洲理事会指令的要求
2004/108/EC EMC Directive
2011/65/EC RoHS Directive
Basate sulle legislazioni degli Stati membri in relazione alla compatibilità elettromagnetica ed alla sicurezza dei prodotti.
On the approximation of the laws of Member States relating to electromagnetic compatibility and product safety.
Basée sur la législation des Etats membres relative à la compatibilité électromagnétique et à la sécurité des produits.
Über die Annäherung der Gesetze der Mitgliedsstaaten in bezug auf elektromagnetische Verträglichkeit und
Produktsicherheit entsprechen.
Basado en la aproximación de las leyes de los Países Miembros respecto a la compatibilidad electromagnética y las Medidas de seguridad relativas al producto.
对关于协调和统一各成员国有关电磁兼容性和产品安全的法律。
Questa dichiarazione è basata sulla conformità dei prodotti alle norme seguenti:
This declaration is based upon compliance of the products to the following standards:
Cette déclaration repose sur la conformité des produits aux normes suivantes:
Diese Erklärung basiert darauf, daß das Produkt den folgenden Normen entspricht:
Esta declaración se basa en el cumplimiento de los productos con las siguientes normas:
本声明以符合下列标准的产品为依据：
EN 55022 (CL
ASS
B ITE), S
EPTEMBER
2006:
A
MMENDMENT A
1: O
CTOBER
2007
EN 55024, S
EPTEMBER
1998:
A
MENDMENT
A2, J
UNE
2003
EN 60950-1, A
PRIL
2006
+A11:2009+A1:2010
L
IMITS AND METHODS OF MEASUREMENTS OF RADIO DISTURBANCE
CHARACTERISTICS OF INFORMATION TECHNOLOGY EQUIPMENT
I
NFORMATION TECHNOLOGY EQUIPMENT
- I
MMUNITY CHARACTERISTICS
L
IMITS AND METHODS OF MEASUREMENT
I
NFORMATION
T
ECHNOLOGY
E
QUIPMENT
- S
AFETY
- P
ART
1: G
ENERAL
R
EQUIREMENTS
Eugene, Oregon USA, [October, 2011] Brad West
Vice President - Supply Chain Operation
Australia
Datalogic Scanning Pty Ltd
Telephone: [61] (2) 9870 3200 [email protected]
China
Datalogic Scanning Shanghai
Telephone: 86-21-62076670 [email protected]
Germany
Datalogic Scanning GmbH
Telephone: 49 (0) 61 51/93 58-0 [email protected]
Hong Kong
Datalogic Scanning Inc. Hong Kong
Telephone: (852) 2367 6337 [email protected]
India
Datalogic Scanning India
Telephone: 91- 22 - 64504739 [email protected]
Italy
Datalogic Scanning SpA
Telephone: [39] (0) 39/62903.1
Japan
Datalogic Scanning KK
Telephone: 81 (0)3 3491 6761 [email protected]
Latin America
Datalogic Scanning, Inc
Telephone: (305) 742-2206 [email protected]
Singapore
Datalogic Scanning Singapore PTE LTD
Telephone: (65) 6435-1311 [email protected]
www.scanning.datalogic.com
Datalogic Scanning, Inc.
959 Terry Street
Eugene, OR 97402
USA
Telephone: (541) 683-5700
Fax: (541) 345-7140
© 2011 Datalogic Scanning, Inc.
820036301 (Rev X1) November-2011
Atsisiųsti
Vieša nuoroda atnaujinta
Vieša nuoroda į jūsų pokalbį buvo atnaujinta. You may view and manage your chat links after registration here.
Dokumento vieša nuoroda
Reklama