ER8500C

50/60Hz

320 Watts Max

8A 250V

CAUTION

RISK OF FIRE -

REPLACE FUSE

AS MARKED

MADE INU.S.A.

19.0”

(483)

17.126”

(435)

Top View

NITEK

ETHERSTRETCH 100 Mbps

1

10 Mbps

2 3 4 5 6 7 8

1000 Mbps

10 Mbps

POWER

TROUBLE

Front View

1 2 3

Rear View

12.0”

(305)

4 5 6 7

8 Port Ethernet & PoE Extender over Coax

ER8500C COAX RECEIVER WITH POE

LAN

12182014

Description

The ER8500C is another component of NITEK’s cutting edge

Etherstretch line. Our Etherstretch solution allows for the utilization of existing coaxial cable infrastructure to transmit data from IP cameras and other network devices along with power to operate these networked devices over the given wire media. This unit also features Nitek NEXTT technology, allowing remote monitoring and control of the system.

The ER8500C is a multi-port Ethernet switch and PoE+ extender for IP video cameras. This Layer 2 PoE+ switch has Gigabit LAN and SFP connections. When used in conjunction with either the

ET1500C or ET4500C transmitter unit (sold separately) operating distances can be extended up to 500 meters (1640 feet).

The receiver provides 802.3AT level power for powered devices up to 300 meters and greater than 802.3AF level power to 500 meters

(see PoE wattage chart for specifics).

The ER8500C receiver and ET1500C transmitter require very little installation time and absolutely no set up or configuration to function. Simply connect a network device to the transmitter. LED connectivity indicators on the receiver show the status of network communication and PoE power. To enable the Critical System

Monitoring Software simple configuration is required to enable viewing and will allow remote monitoring and control of all ports.

The ER8500C Etherstretch network extender overcomes cable distance limitations inherent in traditional networking topologies and provides a viable alternative to fiber or wireless transmission solutions.

8

Left Side

12.625”

(321)

Right Side

Available PoE Wattage At PoE Device

25.0

21.7 21.7

18.2

20.0

14.4

15.0

12.2

10.0

Features

●

Transmits IP data & PoE up to distances of 500 meters (1,640 ft)  

●

Rack mounted multi-channel (8) Etherstretch solution

●

Includes a built-in power source for all connected devices

●

Gigabit output network connectivity

●

Supports 10/100 and PoE over coax cable

●

Supports mega-pixel technology  

●

SFP ports support Fiber interfacing  

●

NEXTT provides remote monitoring  

●

Easy to install, no set up required

●

LED indicators for network signals, link status and power  

●

Short circuit, over current and over voltage protection

●

Supports IEEE802.3af and IEEE802.3at

●

Made in the U.S.A.

5.0

100 Meters

328 Feet

21.7 Watts

200 Meters

656 Feet

21.7 Watts

300 Meters

984 Feet

18.2 Watts

400 Meters

1,312 Feet

14.4 Watts

500 Meters

1,640 Feet

12.2 Watts

* Results charted were calculated using RG59U coaxial cable with a 20AWG center conductor.

NITEK

®

IEC/UL 60950-1

5410 Newport Drive, # 24

Rolling Meadows, IL 60008

Phone: (847) 259-8900

Fax: (847) 259-1300

E-mail: [email protected]

WWW.NITEK.NET

Patent Pending USA

Euro Pat App 2779641

RoHS

COMPLIANT

2002/95/EC

De Aar 99

8253 PN Dronten

The Netherlands

Tel: +31(0) 321 310 043

E-mail: [email protected]

WWW.NITEK.NET

TECHNICAL SPECIFICATION

Receiver Unit

Network Output Port

SFP Port

Link Port

Dimensions

1 RJ45 Connector, 1 Gigabit

1 SFP port, 1 Gigabit

8 BNC Connectors

1 RU x 12.0"D

Operating Temperatures

Shipping Weight

0° to 52° C / 32° to 125° F

12 lbs

Shipping Dimensions

Power Requirements

LED Connectivity Indicators

18”W x 24”H x 8.5”D

IEC380 connector - 110-240VAC/50-60Hz/320Watt Max

Link Status, Power, PoE Out, 10/100/1000Mb

Humidity

Power Supplies

Up to 95% non-condensing

250 watts Internal

Common Installation Type

500m

IEC/UL 60950-1

RoHS

COMPLIANT

2002/95/EC