Axiomtek eBOX560-500-FL Fanless Embedded System Quick Manual

Installing the SO-DIMM Memory

Step 1 Turn off the system, and unplug the power adaptor.

Step 2 Turn the system upside down to locate screws at the bottom, loosen screws.

Step 3 Remove the bottom cover and HDD bracket.

Step 4 Please find the DRAM position then insert memory carefully.

Step 5 Finally, fasten the HDD bracket and bottom cover to complete installation.

 

Note: Please refer to the user’s manual to get more detail information.

4 ©Copyright 2016 Axiomtek Co., Ltd.

Version A1 August 2016

Printed in Taiwan

9416K560020E

eBOX560-500-FL Quick Installation Guide

Packing List

System Unit x 1 DVD/CD x 1 (for Driver & Manual)

Quick Installation Guide x 1

Screws Pack x 1

Optional SSD/HDD

Optional mSATA

Optional Wall-mount kit

Optional Din-rail & VESA kit

Optional DRAM

Optional Mini Card Modules



Do not try to apply power to the system if any damaged components.

Dimensions

©Copyright 2016 Axiomtek Co., Ltd.

Version A1 August 2016

Printed in Taiwan

9416K560020E

1

I/O Outlets

2



The following figures show you I/O outlets on front and rear panels of the eBOX560-500-FL Series.

 Front View

Rear View

©Copyright 2016 Axiomtek Co., Ltd.

Version A1 August 2016

Printed in Taiwan

9416K560020E

Installing the Hard Disk Drive

Step 1 Turn off the system, and unplug the power adaptor.

Step 2 Turn the system upside down to locate screws at the bottom, loosen screws.

Step 3 Remove the bottom cover.

Step 4 Please find the HDD bracket location then loosen four screws of HDD bracket to take out it.

Step 5 Please prepare the following procedure to assemble HDD.

Step 6 Lock the HDD and fasten screws then connect SATA & Power cables.

Step 7 Please fasten screws of HDD bracket to complete installation.

©

Copyright 2016 Axiomtek Co., Ltd.

Version A1 August 2016

Printed in Taiwan

9416K560020E

3