REPTR400
Wireless Repeater Kit
Overview
The Schlage REPTR400 Wireless Repeater Kit is a simple, all-in-one package solution for access control applications that require an extended wireless range. It can be used for indoor or outdoor applications enabling the integration and management of an opening too distant or difficult to reach via hard wires. Ideal applications include remote doors, historic buildings, gates and elevators.
The Schlage REPTR400 includes an AD Series Panel Interface Module
(PIM400-TD2) and an AD Series Wireless Reader Interface (WRI400). The
PIM400-TD2 interfaces with most access control systems. Its function is to wirelessly communicate with either an AD-400 Series wireless lock on the door or a separate WRI400 wired to other electronic components around the door. The PIM400-TD2 receives data via one radio channel and communicates it to the kit’s WRI400 unit to be transmitted via another channel. The additional distances covered can be up to 900 ft. within a normally constructed building or up to 2500 ft. where there is direct line of site.
To extend range further for areas such as a remote gate or for use with a portable reader, a remote antenna (sold separately) can also be employed.
If your distance needs suggest the use of an antenna, contact Allegion technical service for assistance.
Allegion, the Allegion logo, Schlage, and the Schlage logo are trademarks of Allegion plc, its subsidiaries and/or affiliates in the United States and other countries. All other trademarks are the property of their respective owners.
Features and benefits
§ Convenient kit includes the WRI400 and PIM400-TD2
§ Extends the reach of your access control system to remote locations without running wires
§ Up to two REPTR400s can be added in a series (use only one for applications involving mag stripe credentials)
§ WRI400:
- 2 form C relay outputs –strike and auxiliary
- Each RF transmission is encrypted with AES-128 bit keys
- Reader interfaces support– Wiegand
(data1/data 0) up to 255 bits and magnetic stripe
(Clock & Data) up to 255 bits
§ PIM400-TD2:
- 900 MHz spread spectrum RF technology for long range, reliable communications
- Automatic linking to remote wireless access points with 10 channel frequencies to select from enables easy commissioning
- AES-128 bit encrypted spread spectrum transmissions
CYBERSECURITY
Learn about Allegion’s commitment
PIM400-TD2 specifications
Frequency range 902-928 MHz
Modulation
Communication
Operating temperature
900 MHz spread spectrum, direct sequence, 10 channels
Up to 200 ft (normal building construction); up to
1000 ft, clear line of sight
-31° to 151°F (-35° to 66°C)
Humidity 0% to 100% condensing
Power supply
Dimensions
(H x W x D)
Weight
Certifications
12 VDC or 24VDC
7.1" x 7.1" x 3.0"
(18.0 cm x 18.0 cm x 7.6 cm)
1.25 lb (.56 kg)
NEMA 1, 4, 4X, 6; UL 294;
FCC Part 15; RoHS; Industry
Canada (IC)
REPTR400
Access control panel
Hardwired
PIM400
Wireless up to 200’
(normal building construction), up to 1000’ line of sight
WRI400
Hardwired
(up to 500' with
22AWG wiring)
12V power supply PIM400-TD2
Wireless up to
200’ (normal building
construction), up to 1000’, line of sight
WRI400
Power supply
Ceiling Line
DPS
Finish floor
Note: There are many other applications that use different wireless access points; this is one example of how a REPTR400 can be used.
Card reader
WRI400 specifications
Frequency range
Modulation
RF interference avoidance
Transmission/encryption
Data rate
Credential verification time
Communication range
Power supply requirements
Connector cable specifications
DC power input
Credential readers (x2)
Strike/aux relay outputs
Relay output tolerances
Operating temperature
Operating humidity
Dimensions (H x W x D)
Certifications
Optional accessories
Request-to-enter and
-exit inputs
Strike output relay
Auxiliary output relay
Available through one of our GSA schedule 84 approved distributors
902-928 MHz
900 MHz spread spectrum, direct sequence, 10 channels
Optional dynamic channel switching
AES-128 bit key (optional)
RF: 40 kbps
< 1 second (WRI requires less than 100ms. Response time does not include latency time of
ACP. Each REPTR400 Kit adds 250ms delay)
Up to 200 ft (61 m), normal building construction
Up to 1000 ft (305 m), clear line of sight (See ANT400-REM data sheet for increasing distance)
12 VDC or 24 VDC; 500 mA maximum current
18AWG, 2 conductor (Belden 8760 or equivalent), up to 1000 ft (305 m)
Data signals: 22AWG, 6 conductor (Alpha 1296C or equivalent) up to 500 feet
(152 meters)
Reader tamper signals: 18AWG, twisted pair shielded (Belden 8760 or equivalent) up to
500 feet (152 meters)
18AWG, 2 conductor (Belden 8760 or equivalent), up to 2000 feet (610 meters)
18AWG, 2 conductor (Belden 8760 or equivalent), up to 2000 feet (610 meters)
Form C relay; 6 amps at 24 VDC or 6 amps at 120 VAC or 3 amps at 240 VAC
Form C relay; 2 amps at 24 VDC or 0.5 amps at 120 VAC
-31°F (-35°C) to 151°F (66°C)
0 - 100% condensing
10.43" x 7.28" x 3.79" (26.49 cm x 18.49 cm x 9.63 cm)
NEMA 1, 4, 4X, 6; UL 294; FCC Part 15; Industry Canada (IC); RoHS
593P1-12 DC - power supply for Panel Interface Module (PIM)
About Allegion
Allegion (NYSE: ALLE) is a global pioneer in safety and security, with leading brands like CISA ® , Interflex ® , LCN ® , Schlage ® , SimonsVoss ® and Von Duprin ® . Focusing on security around the door and adjacent areas, Allegion produces a range of solutions for homes, businesses, schools and other institutions. Allegion is a $2 billion company, with products sold in almost 130 countries. For more, visit www.allegion.com.
© 2021 Allegion
004015, Rev. 03/21 www.allegion.com/us
