advertisement
User’s Manual
MODEL:M06
Wireless Headphone
Wireless Headset English
Thank you for choosing the AUSDOM M06 Wireless headset.
The M06 model is enabled with the Wireless v 4.0 technology.
Please take time to read this user manual carefully in order to understand the overall functions and operations of the product.
Note: Please read the user’s manual carefully before using, and keep it properly for future reference.
1. Product features a) The best travel companion, soft and comfortable earmuffs, ear cups with a rotatable design, ergonomic in design.
b) Wireless version 4.0 technology, 10 meters of communication distance, better and smoother communication.
c) Connecting external devices via a 3.5mm audio cable to connect the device, worry free – no more empty battery.
d) Powerful bass speakers offering an immensely aural delight.
2. Package content
Wireless headset Micro USB charging cable
3.5mm audio cable User ’s manual
3. Button function
1). Volume up(+) 2). Volume down(-)
3). Power on/off button 4). LED indicator
5). Previous track 6). Play/pause button
7). Next track 8). Micro USB interface for charging
9). 3.5mm Line-in jack
-1-
Wireless Headset English
4. Charging the headset
Attention: Fully charge the headset before using the headset for the first time.Playtime varies according to volume level and audio content.
Use the USB charging cable of the accessories provided to charge the headset. Plug the smaller end of USB charging cable into the Micro-USB interface on the right side of the ear cup; plug the other bigger end of charging cable into the USB interface of other power charging devices. When the battery is being charged, the indicator turns red. It takes 3-6 hours to fully charge the battery for the first time. Afterward, the charging time is 2-3 hours.
When the battery is fully charged, the indicator light goes off.
Note: You may use the Wireless function while charging the battery. However, the M06 headset will take longer to be fully charged. To use the audio cable while charging the battery, the headset will automatically turn off. This will not affect the charging duration. When the battery level is low, the M06 headset will issue an audio reminder.
5. Power on and off a) Power on: Press and hold the “Power on/off” button for about
2-4 seconds until an audio sound is heard and the LED indicator flashes blue every second.
b) Power off: Press and hold the “Power on/off” button for about
3-5 seconds until an audio sound is heard and the LED indicator flashes red for 1-2 seconds and then turns off.
6. Pairing with the Wireless
Steps before pairing
Attention: Prior to pairing with the headset, please be sure that your desktop PC or laptop is equipped with Wireless functions. If there is no Wireless function installed in the PC, you need to purchase a Wireless adaptor of Wireless version 2.1 or later.
a. Pairing with the computer
1) Make sure the headset is in OFF mode;
2) Start the PC Wireless function to set device search;
3) The research output list will appear on the screen;
-2-
4) Make sure the distance between the headset and the PC to be within 1 meter;
5) Press and hold the power button on the headphone until it powers on but don’t let go just yet. Continue holding down on the power button until you see the LED indicator flashes blue and red alternately, which means your headphone is in“pairing mode”waiting to be paired with your device.
6) Wait for the search process to discover the “AUSDOM M06” device; then select the “AUSDOM M06” device from the search output list for pairing;
7) If your PC asks for “PIN code”, please enter “0000” (4 zeros).
Once the pairing process succeeds, the headset blue LEDs will be on continuously.
8) If the pairing process fails after 60 seconds, repeat the aforementioned 1-7 steps.
b. Pairing with the mobile phone
1) Make sure the headset is in OFF mode;
2) Make sure the distance between the headset and the PC to be within 1 meter;
3) Press and hold the power button on the headphone until it powers on but don’t let go just yet. Continue holding down on the power button until you see the LED indicator flashes blue and red alternately, which means your headphone is in“pairing mode”waiting to be paired with your device.
4) Start the Wireless function of the mobile phone to set device search;
5) Select the “AUSDOM M06” device from the search output list for pairing. Once the pairing process succeeds, the headset blue
LEDs will be on continuously.
6) If the pairing process fails after 60 seconds, repeat the aforementioned 1-5 steps.
Steps before pairing
Attention: Prior to pairing with the headset, please be sure that your desktop PC or laptop is equipped with Wireless functions. If there is no Wireless function installed in the PC, you need to purchase a Wireless adaptor of Wireless version 2.1 or later.
a. Pairing with the computer
1) Make sure the headset is in OFF mode;
2) Start the PC Wireless function to set device search;
3) The research output list will appear on the screen;
Wireless Headset English
4) Make sure the distance between the headset and the PC to be within 1 meter;
5) Press and hold the power button on the headphone until it powers on but don’t let go just yet. Continue holding down on the power button until you see the LED indicator flashes blue and red alternately, which means your headphone is in“pairing mode”waiting to be paired with your device.
6) Wait for the search process to discover the “AUSDOM M06” device; then select the “AUSDOM M06” device from the search output list for pairing;
7) If your PC asks for “PIN code”, please enter “0000” (4 zeros).
Once the pairing process succeeds, the headset blue LEDs will be on continuously.
8) If the pairing process fails after 60 seconds, repeat the aforementioned 1-7 steps.
b. Pairing with the mobile phone
1) Make sure the headset is in OFF mode;
2) Make sure the distance between the headset and the PC to be within 1 meter;
3) Press and hold the power button on the headphone until it powers on but don’t let go just yet. Continue holding down on the power button until you see the LED indicator flashes blue and red alternately, which means your headphone is in“pairing mode”waiting to be paired with your device.
4) Start the Wireless function of the mobile phone to set device search;
5) Select the “AUSDOM M06” device from the search output list for pairing. Once the pairing process succeeds, the headset blue
LEDs will be on continuously.
6) If the pairing process fails after 60 seconds, repeat the aforementioned 1-5 steps.
7. Connecting to a previously paired devices
M06 can connect to devices that have been paired previously.
Before the M06 headset enters in the pair mode, the M06 headset will automatically connect to the last device that has been paired and connected with.
-3-
Attention: For certain PCs or laptop computers, you need to manually activate the Wireless every time when connecting to the Wireless.
M06 can connect to devices that have been paired previously.
Before the M06 headset enters in the pair mode, the M06 headset will automatically connect to the last device that has been paired and connected with.
Wireless Headset English
Attention: For certain PCs or laptop computers, you need to manually activate the Wireless every time when connecting to the Wireless.
Button operation
1) Volume control
Function
Increase the volume
Decrease the volume
Operation
Tap or press the volume control +button.
Tap or press the volume control “-” button.
Attention
When reaching the maximum or minimum volume, a “beep” sound is heard.
2) Answer calls
Function
Incoming calls
During the call
During the call, switch to mobile phone.
Operation
Incoming calls
Reject
Hang up
Attention
Tap the “Power on/off” button
Press and hold the “Power on/off” button for about 2 seconds
Tap the “Power on/off” button
Hand up the phone Tap the “Power on/off” button
In pair mode
Redial the last outgoing call
Tap the “Power on/off” button twice
3) Audio media in play
Function
No audio media in play¹
Audio media in play
Audio media in play or pause²
Operation
Play audio media
Attention
Press the “Play/Pause” button
Pause audio media Press the “Play/Pause” button
Switch to the next song Press the “Next track” button
Replay the song/Switch to the previous song
Press the “Previous track” button
¹ To play the songs for the first time, attention shall be given to the multimedia broadcast program;
² Some multimedia broadcast devices support the replay function; some multimedia broadcast devices support the function of playing the previous song.
-4-
Wireless Headset English
Attention: While listening to the music, if you answer an incoming call or make a call, the audio media or music will replay after the call is terminated.
4) State of the LED indicator
Charging the battery the battery fully charged
Standby (before pairing)
Standby (after pairing)
During a call
Incoming calls
Battery level low
Pairing
The LED indicator turns red.
The Red LED indicator turns off.
The LED indicator flashes blue every second.
The LED indicator turns blue.
The LED indicator flashes blue twice every second.
The LED indicator flashes red twice every second.
The LED indicator flashes red.
The LED indicator flashes red and blue alternately.
8. Using the mobile phone or the M06 Wireless headset
* When there is an incoming call, a ring sound in the headset is heard.
* Tag the “Power on/off” button to answer the incoming call. If you press the answer button on the mobile phone to answer the incoming call, music will stop accordingly.
* Tag the “Power on/off” button again to hang up the call or you can press the hang up button on the mobile phone.
* Once the call is terminated, music will automatically continuously play again.
9. Used as a wired headset
Plugging the 3.5mm audio cable to the left side of the ear cup, the
M06 headset can be used as a wired headset under certain circumstances, such as during air travel, the headset battery with no power, or the audio device without the Wireless function and without pairing.
Note: The microphone can't work when using the headset as a wired headset.
10. Warranty
-5-
Wireless Headset English
The M06 is covered by a 1-year manufacturer warranty. For more information, visit www.ausdom.com/warranty.
Specifications
Microphone spec
Microphone Unit: Φ6*5mm
Directivity: Omni-directional
S.P.L:-58±2DB S.P.L at 1KHz
Impedance:≤2.2KΩ
Frequency response:100Hz-10,000Hz
Operating voltage:4.5V
Speaker Spec
Speaker diameter: Φ40mm
Impedance: 32Ω
S.P.L: 90±3 dB S.P.L at 1KHz
Rated power: 20 mW
Aggregate capability: 50 mW
Frequency response: 20Hz-20,000Hz
Wireless spec
Wireless version: 4.0
Wireless distance: 10m
Transmission frequency: 2.40GHz-2.48GHz
Transmission power: Class 2 0.025-2.5Mw
Support profile: HSP/HFP/A2DP/AVRCP
Battery spec
Battery type: 400mah rechargeable lithium battery
Charging port: Micro USB
Running time: About 20 hours talking/About 20 hours music playing time
Standby time: More than 2000 hours
Charging time: 2-3 hours
Operating temperature: -10°C-45°C
Storage temperature: -25°C-60°C
Note: Features and technical specifications are subject to change without notice, we apologize for any inconvenience.
-6-
Wireless-Kopfhörer Deutsch
Wir bedanken uns für Ihren Kauf des AUSDOM M06 Kopfhörers mit drahtloser Technologie; wir bitten Sie diese Schnellanleitung gründlich zu lesen, um diesen neuartigen drahtlosen Kopfhörer am besten nutzen zu können.
Hinweis: Bitte lesen Sie diese Bedienungsanleitung sorgfältig durch, bevor Sie, und halten Sie sie richtig für die Zukunft.
1. Produkteigenschaften a) Großartig zum Reisen: solider und drehbarer Kopfhöreraufbau für langjährigen Gebrauch.
b) Die Wireless V4.0 Technologie ermöglicht es dem M06, sich mit Ihren bluetoothfähigen Geräten in einem 10 Meter Bereich zu verbinden.
c) Eine zusätzliche Verbindung durch ein 3,5 mm Audiokabel für
Musikstreaming, ohne sich um eine leere Batterie Sorgen zu machen.
d) Kraftvolle und satte Bass-Lautsprecher liefern Ihnen einen unglaublichen Audiogenuss.
2. Verpackungsinhalt
Wireless-Kopfhörer Micro-USB-Kabel
3,5 mm Audiokabel Benutzerhandbuch
3. Button function
1) Lauter(+) 2) Leiser(-)
3) Ein/Aus-Taste 4) LED-Anzeiged
5) Vorheriger Titel 6) Play/Pause-Taste
7) Nächster Titel 8) Micro-USB-SchnittstellezumAufladen
9) 3.5 mm Line-In-Eingang
-1-
Wireless-Kopfhörer Deutsch
4. Aufladen
ACHTUNG: Laden Sie den Kopfhörer vor dem erstenGebrauch vollständig auf.Die Wiedergabedauer variiert abhängig von der Lautstärke und dem Audioinhalt.
Verbinden Sie das USB-Ladekabel mit einem eingeschaltetem
USB-Anschluss und dem USB-Eingang an der rechten Ohrmuschel.
Während des Ladensleuchtet die rote LED-Anzeige auf.Die
Ladezeit beträgt normalerweise beim ersten Mal 3-6 Stunden, danach 2-3 Stunden.
Wenn die Batterie voll aufgeladen ist, stellt sich die rote LED-
Anzeige aus.
Hinweis: Sie können während des Ladens die Wireless-Funktion benutzen, aber dieBenutzung des M06 kann die Ladezeit verlängern.
Der Kopfhörer kann auch ausgeschaltet werden und während des Ladens mit dembeigelegten Audiokabel benutzt werden.Dies beeinflusst die Ladezeit nicht.Bei schwacher Batterie blinkt das rote LED.M06 informiert Sie auch perSprach¬benachrichtigung
über den niedrigen Batteriestand.
5. EIN und AUS a) Zum Einschalten drücken und halten Sie die Ein/Aus-Tastefür etwa 2-4 Sekunden, Siehören einen Hinweiston und das blaue
LED blinkt einmal pro Sekunde.
b) Zum Ausschalten drücken und halten Sie die Ein/Aus-Tastefür etwa 3-5 Sekunden, Siehören einen Hinweiston und das rote
LED blinkt schnell während etwa 1-2 Sekunden.
6. Kopplung mit Wireless-Geräten
Erweiterte Funktionen
Hinweis: Bevor Sie dieses Produkt installieren, stellen Sie bitte sicher, dass Ihr Computer oder Laptop die eingebaute Wireless-
Funktion verfügbar hat.
Falls Ihr Computer nicht bluetoothfähig ist, müssen Sie einen
Wireless-Dongle kaufen, vorzugsweise Version 2.1 oder höher.
-2a. Kopplung des Kopfhörers mit Ihrem Computer
1) Stellen Sie sicher, dass Ihr Kopfhörer ausgeschaltet ist.
2) Aktivieren Sie zum Einrichtendas Wireless-Program Ihres
Computers.
3) Die Anzeige „Suche neues Gerät” erscheint.
4) Stellen Sie beide Geräte nicht weiter als einen Meter von einander auf.
5) Halten Sie die Netztaste an einem Kopfhörer gedrückt, bis er einschaltet - lösen Sie die Taste jetzt noch nicht. Halten Sie die
Netztaste weiter gedrückt, bis die LED-Meldeleuchte abwechselnd blau und rot blinkt. Nun ist Ihr Kopfhörer im "Modus Paaren" und wartet auf die Verbindung mit Ihrem Gerät.
6) Sobald das System das neue Gerät erkannt hat und Sie
„AUSDOM M06“ sehen, wählen Sie die Kopplung mit „AUSDOM
M06“.
7) Falls Ihr Computer Sie bittet, den PIN-Code einzugeben, geben Sie 0000 (4 Nullen) ein. Sie werden gebeten den
PIN-Code einzugeben, benutzen Sie bitte “0000”. Nach der erfolgreichen Kopplung das blause LED des Kopfh örers leuchtet dauernd.
8) Falls die Kopplung nach 60 Sekunden nicht stattgefunden hat, wiederholen Sie bittedie oben beschriebenen Schritte 1 bis 7.
b. Kopplung des Kopfhörers mit Ihrem Telefon
1) Stellen Sie sicher, dass Ihr Kopfhörer ausgeschaltet ist.
2) Stellen Sie beide Geräte nicht weiter als einen Meter von einander auf.
3) Halten Sie die Netztaste an einem Kopfhörer gedrückt, bis er einschaltet - lösen Sie die Taste jetzt noch nicht. Halten Sie die
Netztaste weiter gedrückt, bis die LED-Meldeleuchte abwechselnd blau und rot blinkt. Nun ist Ihr Kopfhörer im "Modus Paaren" und wartet auf die Verbindung mit Ihrem Gerät.
4) Aktivieren Sie Wireless auf Ihrem Telefon und stellen Sie es auf die Suche nachneuen Geräten ein.
5) Wählen Sie „AUSDOM M06” zum Koppeln aus, nach der erfolgreichen Kopplung,das blause LED des Kopfh örers leuchtet dauernd.
6) Falls die Kopplung nach 60 Sekunden nicht gelingt , wiederholen Sie bitte die oben beschriebenen Schritte 1 bis 5.
Erweiterte Funktionen
Hinweis: Bevor Sie dieses Produkt installieren, stellen Sie bitte sicher, dass Ihr Computer oder Laptop die eingebaute Wireless-
Funktion verfügbar hat.
Falls Ihr Computer nicht bluetoothfähig ist, müssen Sie einen
Wireless-Dongle kaufen, vorzugsweise Version 2.1 oder höher.
Wireless-Kopfhörer Deutsch a. Kopplung des Kopfhörers mit Ihrem Computer
1) Stellen Sie sicher, dass Ihr Kopfhörer ausgeschaltet ist.
2) Aktivieren Sie zum Einrichtendas Wireless-Program Ihres
Computers.
3) Die Anzeige „Suche neues Gerät” erscheint.
4) Stellen Sie beide Geräte nicht weiter als einen Meter von einander auf.
5) Halten Sie die Netztaste an einem Kopfhörer gedrückt, bis er einschaltet - lösen Sie die Taste jetzt noch nicht. Halten Sie die
Netztaste weiter gedrückt, bis die LED-Meldeleuchte abwechselnd blau und rot blinkt. Nun ist Ihr Kopfhörer im "Modus Paaren" und wartet auf die Verbindung mit Ihrem Gerät.
6) Sobald das System das neue Gerät erkannt hat und Sie
„AUSDOM M06“ sehen, wählen Sie die Kopplung mit „AUSDOM
M06“.
7) Falls Ihr Computer Sie bittet, den PIN-Code einzugeben, geben Sie 0000 (4 Nullen) ein. Sie werden gebeten den
PIN-Code einzugeben, benutzen Sie bitte “0000”. Nach der erfolgreichen Kopplung das blause LED des Kopfh örers leuchtet dauernd.
8) Falls die Kopplung nach 60 Sekunden nicht stattgefunden hat, wiederholen Sie bittedie oben beschriebenen Schritte 1 bis 7.
b. Kopplung des Kopfhörers mit Ihrem Telefon
1) Stellen Sie sicher, dass Ihr Kopfhörer ausgeschaltet ist.
2) Stellen Sie beide Geräte nicht weiter als einen Meter von einander auf.
3) Halten Sie die Netztaste an einem Kopfhörer gedrückt, bis er einschaltet - lösen Sie die Taste jetzt noch nicht. Halten Sie die
Netztaste weiter gedrückt, bis die LED-Meldeleuchte abwechselnd blau und rot blinkt. Nun ist Ihr Kopfhörer im "Modus Paaren" und wartet auf die Verbindung mit Ihrem Gerät.
4) Aktivieren Sie Wireless auf Ihrem Telefon und stellen Sie es auf die Suche nachneuen Geräten ein.
5) Wählen Sie „AUSDOM M06” zum Koppeln aus, nach der erfolgreichen Kopplung,das blause LED des Kopfh örers leuchtet dauernd.
-3-
6) Falls die Kopplung nach 60 Sekunden nicht gelingt , wiederholen Sie bitte die oben beschriebenen Schritte 1 bis 5.
Erweiterte Funktionen
Hinweis: Bevor Sie dieses Produkt installieren, stellen Sie bitte sicher, dass Ihr Computer oder Laptop die eingebaute Wireless-
Funktion verfügbar hat.
Falls Ihr Computer nicht bluetoothfähig ist, müssen Sie einen
Wireless-Dongle kaufen, vorzugsweise Version 2.1 oder höher.
a. Kopplung des Kopfhörers mit Ihrem Computer
1) Stellen Sie sicher, dass Ihr Kopfhörer ausgeschaltet ist.
2) Aktivieren Sie zum Einrichtendas Wireless-Program Ihres
Computers.
3) Die Anzeige „Suche neues Gerät” erscheint.
4) Stellen Sie beide Geräte nicht weiter als einen Meter von einander auf.
5) Halten Sie die Netztaste an einem Kopfhörer gedrückt, bis er einschaltet - lösen Sie die Taste jetzt noch nicht. Halten Sie die
Netztaste weiter gedrückt, bis die LED-Meldeleuchte abwechselnd blau und rot blinkt. Nun ist Ihr Kopfhörer im "Modus Paaren" und wartet auf die Verbindung mit Ihrem Gerät.
6) Sobald das System das neue Gerät erkannt hat und Sie
„AUSDOM M06“ sehen, wählen Sie die Kopplung mit „AUSDOM
M06“.
7) Falls Ihr Computer Sie bittet, den PIN-Code einzugeben, geben Sie 0000 (4 Nullen) ein. Sie werden gebeten den
PIN-Code einzugeben, benutzen Sie bitte “0000”. Nach der erfolgreichen Kopplung das blause LED des Kopfh örers leuchtet dauernd.
8) Falls die Kopplung nach 60 Sekunden nicht stattgefunden hat, wiederholen Sie bittedie oben beschriebenen Schritte 1 bis 7.
b. Kopplung des Kopfhörers mit Ihrem Telefon
1) Stellen Sie sicher, dass Ihr Kopfhörer ausgeschaltet ist.
2) Stellen Sie beide Geräte nicht weiter als einen Meter von einander auf.
3) Halten Sie die Netztaste an einem Kopfhörer gedrückt, bis er einschaltet - lösen Sie die Taste jetzt noch nicht. Halten Sie die
Netztaste weiter gedrückt, bis die LED-Meldeleuchte abwechselnd blau und rot blinkt. Nun ist Ihr Kopfhörer im "Modus Paaren" und wartet auf die Verbindung mit Ihrem Gerät.
4) Aktivieren Sie Wireless auf Ihrem Telefon und stellen Sie es auf die Suche nachneuen Geräten ein.
5) Wählen Sie „AUSDOM M06” zum Koppeln aus, nach der erfolgreichen Kopplung,das blause LED des Kopfh örers leuchtet dauernd.
Wireless-Kopfhörer Deutsch
6) Falls die Kopplung nach 60 Sekunden nicht gelingt , wiederholen Sie bitte die oben beschriebenen Schritte 1 bis 5.
7. Verbinden mit gekoppelten Geräten
Das M06 muss bereits mit Ihrem Gerät gekoppelt sein, bevor sie es verbindenkönnen
Wenn das M06 eingeschaltet und nicht im Kopplungsmodus ist, wird sich das M06 , falls es eingeschaltet ist, automatisch mit dem zuletzt gekoppelten Gerät koppeln.
Hinweis: Bei einigen PC und Mac Computern müssen Sie das
Wireless-Audio vor jeder Verbindung per Hand aktivieren.
Anweisungen zur Steuerung
1) Kontrolle der Lautstärke
Funktion
Lautstärke erhöhen
Lautstärke verringern
Operation
Einmal drücken oder drücken und halten der
Lautstärke höher V+ Taste
Einmal drücken oder drücken und halten der
Lautstärke geringer V- Taste
Hinweise
Beim Erreichen des
Minimums oder
Maximums der
Lautstärke gibt es einen Hinweiston
2) Steuerung der Telefonanrufe
Status
Eingehendes
Gespräch
Laufendes Gespräch
Laufendes Gespräch
Handy Bedienhörer aktiv
KopplunAgsmodus verbunden
Funktion
Anruf beantworten
Anruf ablehnen
Anruf beenden
Anruf beenden
Operation
Ein/Aus-Taste einmal drücken
Ein/Aus-Taste drücken und für 2 Sekundenhalten
Ein/Aus-Taste einmal drücken
Ein/Aus-Taste einmal drücken
Letzte Nummer wählen Ein/Aus-Taste zweimal drücken
-4-
Wireless-Kopfhörer Deutsch
3) Steuerung der Medienwiedergabe
Status
Keine Wiedergabe aktiv¹
Medien laufen
Funktion
Media spielen
Operation
Spielen/Pause-Taste drücken
Medienwiedergabe pausieren
Spielen/Pause-Taste drücken
Medien spielen oder sind unterbrochen ²
Zur nächsten Melodie springen
Melodie neu beginnen/ vorherige Melodie
Nächste Taste drücken
Vorherige Taste drücken
¹ Prüfen Sie die Anwendung des Medienspielers zu: Beginn der
Wiedergabe
² Einige Medienspieler unterstützen die Neubeginn der Melodie, einige Medienspieler unterstützen Vorherige Melodie.
Hinweis: Wenn Sie einen Anruf beantworten während Sie Medien spielen, beginnt das Spielen der Medien/Musik automatisch nach Beendigung des Anrufs.
4) LED-Anzeigestatus
Während des Aufladens
Aufladen komplett
Wartezustand
(nicht verbunden)
Wartezustand (verbunden)
Laufendes Gespräch
Eingehendes Gespräch
Batteriestand niedrig
Kopplung
Rotes LED-Licht leuchtet
Rotes LED-Licht erloschen
Blaues LED-Licht blinkt einmal jede Sekunde
Blaues LED-Licht leuchtet
Blaues LED-Licht blinkt zweimal alle Sekunde
Rotes LED-Licht blinkt zweimal alle Sekunde
Rotes LED-Licht blinkt
Rotes und blaues LED-Licht blinken abwechselnd
-5-
Wireless-Kopfhörer Deutsch
8. Gebrauch eines Handys oder M06
* Bei einen eingehenden Gespräch klingelt der Kopfhörer.
* Einmal drücken auf die Ein/Aus-Taste, um das eingehende
Gespräch zu beantworten.
Sie können auch die Antworttaste auf dem Handy drücken, um das Gespräch auf Ihrem Kopfhörer zu beantworten.
* Die Wiedergabe der Musik wird momentan unterbrochen.
Um das Gespräch zu beenden, drücken Sie die Taste noch einmal.
Sie können das Gespräch auch direkt auf Ihrem Handy beenden.
* Sobald Sie das Gespräch beendet haben, spielt die
Wiedergabe der Musik erneut.
9. Gebrauch eines verkabelten Kopfhörers
Das M06 kommt mit einem 3,5 Audioeingang auf der linken
Hörmuschel und einem Audiokabel zur verkabelten Benutzung.
Damit können Sie Unterhaltungsgeräte im Flugzeug benutzen,
Geräte die keinen Wireless haben oder nicht gekoppelt sind oder auch bei leerer Batterie.
Hinweis: Das Mikrofon arbeitet nicht beim Gebrauch des verkabelten Kopfhörers.
Technische Daten
Mikrofon
Mikrofon: Φ6 x 5mm
Richtung: Omni-direktional
Schalldruckkurve:-58±2dBbei 1kHz
Impedanz: ≤ 2,2KΩ
Frequenzbereich: 100Hz - 10.000 Hz
Betriebsspannung: 4,5 V
-6-
Wireless-Kopfhörer Deutsch
Lautsprecher
Lautsprecher Durchmesser: Φ40mm
Impedanz: 32Ω
Schalldruckkurve: 90±3 dBbei 1kHz
Nennstrom: 20 mW
Gesamtleistung: 50 mW
Frequenzbereich: 20 Hz - 20.000 Hz
Wireless
Wireless-Version: 4.0
Wireless-Reichweite: 10 Meter
Übertragungsfrequenz: 2,4 GHz -2,48 GHz
Sendeleistung: Klasse 2 0,025-2,5 Mw
Unterstützt: HSP/HFP/A2DP/AVRCP
Batterie
Typ: 400 mAh wiederaufladbare Lithium Batterie
Ladeanschluss: Mikro-USB
Laufzeit: etwa 20 Stunden Sprache bzw. etwa 20 Stunden
Musikwiedergabe
Stand-by-Zeit: mehr als 2000 Stunden
Ladezeit: 2-3 Stunden
Betriebstemperatur: -10 °C bis 45 °C
Lagertemperatur: -25°C bis 60°C
Hinweis: Feature und Spec. können ohne vorherige Ankündigung geändert werden.
-7-
Wireless-гарнитура русский
Благодарим за приобретение наушников М06 AUSDOM с беспроводной технологией Wireless 4.0; мы советуем вам внимательно ознакомиться с этим руководством, чтобы узнать о всех преимуществах инновационных беспроводных наушников.
Примечание: Перед использованием рекомендуется внимательно ознакомиться с руководством, и сохранить его для дальнейшего обращения.
1. Характеристики a)Идеально подходит для путешествий: мягкие, комфортные, прочные наушники с возможностью поворота для длительного пользования. b) Технология Wireless 4.0 позволяет передавать данные с ваших наушников в пределах десяти метров. c) В комплект входит аудиокабель толщиной 3,5 мм, который позволяет слушать музыку на тот случай, если батарея разрядится. d) Мощные, отражающие полноту звука, динамики позволяют вам насладиться аудио-звучанием.
2. Содержимое комплекта
Наушники с технологией Wireless Micro USB кабель
Аудиокабель толщиной 3, 5 мм Руководство пользователя
3. Функции кнопок
1) Объем до (+) 2) Уменьшение громкости (-)
3) Включение / выключения 4) Светодиодный индикатор
5) Предыдущий трек 6) Кнопка воспроизведения / паузы
7) Следующий трек 8) Micro USB интерфейс для заряда
9) Входной разъем 3,5 мм
-1-
Wireless-гарнитура русский
4. Заряд
Внимание! Перед первым использованием необходимо выполнить полный заряд батареи наушников.Время воспроизведения зависит от уровня громкости и типа аудиофайла.
Подсоедините кабель USBк любому USB-порту и USB–разъему на правом наушнике. Светодиодный индикатор будет гореть красным светом во время заряда. В первый раз время заряда обычно составляет 3-6 часов, а в последующие разы – 2-3 часа. Когдабатареяполностьюзаряжена, индикаторперестаетгоретькраснымсветом.
Примечание: Вы можете пользоваться технологией Wireless во время заряда, однако одновременное пользование M06 увеличивает время заряда. Наушники также можно выключить и воспользоваться аудиокабелем, которые не влияет на время заряда.
Если уровень заряда низкий, загорается индикатор загорается красным светом. M06 также обладает функцией голосового уведомления при низком уровне заряда.
5. Включение и выключение a) Для включения нажмите и удерживайте кнопку вкл/выкл в течение 2-4 секунд, вы услышите определенный сигнал, а индикатор загорится синим светом.
b) Для выключения нажмите и удерживайте кнопку вкл/выкл в течение 3-5 секунд, а индикатор будет гореть красным светом 1-2 секунды.
6. Спряжение с устройствами Wireless
Расширенные функции
Примечание: Перед установкой данного продукта, убедитесь, что в ваш компьютер или ноутбук встроенный модуль
Wireless. Если он отсутствует, вы можете приобрести
Wireless адаптер, предпочтительно версию 2.1 или более усовершенствованную версию.
-2a. Сопряжение наушников с компьютером
1) Убедитесь в том, что наушники выключены.
2) Запустите программу Wireless на вашем компьютере для установки настроек.
3) Всплыветэкран “Search new device”.
4) Расположите устройства на расстоянии не более одного метра друг от друга.
5) Нажмите и удерживайте кнопку питания на одной гарнитуре, пока она не включится. Продолжайте удерживать кнопку питания нажатой, пока светодиодный индикатор не начнет мигать синим и красным цветом попеременно. Это означает, что гарнитура находится в "режиме сопряжения", ожидая соединения либо с вашим устройством.
6) После того как система обнаружила новое устройство и на экране высветилось “AUSDOM M06”, нажмите“AUSDOM
M06” для сопряжения.
7) Если компьютер потребует ввести PIN-код = 0000 (4 нуля), введите «0000». После удачного сопряжения, Гарнитура синий светодиод будет гореть.
8) Если сопряжение не произошло по истечению 1 минуты, повторите шаги 1-7, описанные выше.
b. Сопряжение наушников с телефоном
1) Убедитесь, что наушники выключены.
2) Расположите устройства на расстоянии не более одного метра друг от друга.
3) Нажмите и удерживайте кнопку питания на одной гарнитуре, пока она не включится. Продолжайте удерживать кнопку питания нажатой, пока светодиодный индикатор не начнет мигать синим и красным цветом попеременно. Это означает, что гарнитура находится в "режиме сопряжения", ожидая соединения либо с вашим устройством.
4) Включите Wireless на вашем телефоне и задайте поиск новых устройств.
5) Выберите “AUSDOM M06” для сопряжения. После удачного сопряжения, Гарнитура синий светодиод будет гореть.
6) Если сопряжение не произошло по истечению 1 минуты, повторите шаги 1-5, описанные выше.
Расширенные функции
Примечание: Перед установкой данного продукта, убедитесь, что в ваш компьютер или ноутбук встроенный модуль
Wireless. Если он отсутствует, вы можете приобрести
Wireless адаптер, предпочтительно версию 2.1 или более усовершенствованную версию.
Wireless-гарнитура русский a. Сопряжение наушников с компьютером
1) Убедитесь в том, что наушники выключены.
2) Запустите программу Wireless на вашем компьютере для установки настроек.
3) Всплыветэкран “Search new device”.
4) Расположите устройства на расстоянии не более одного метра друг от друга.
5) Нажмите и удерживайте кнопку питания на одной гарнитуре, пока она не включится. Продолжайте удерживать кнопку питания нажатой, пока светодиодный индикатор не начнет мигать синим и красным цветом попеременно. Это означает, что гарнитура находится в "режиме сопряжения", ожидая соединения либо с вашим устройством.
6) После того как система обнаружила новое устройство и на экране высветилось “AUSDOM M06”, нажмите“AUSDOM
M06” для сопряжения.
7) Если компьютер потребует ввести PIN-код = 0000 (4 нуля), введите «0000». После удачного сопряжения, Гарнитура синий светодиод будет гореть.
8) Если сопряжение не произошло по истечению 1 минуты, повторите шаги 1-7, описанные выше.
b. Сопряжение наушников с телефоном
1) Убедитесь, что наушники выключены.
2) Расположите устройства на расстоянии не более одного метра друг от друга.
3) Нажмите и удерживайте кнопку питания на одной гарнитуре, пока она не включится. Продолжайте удерживать кнопку питания нажатой, пока светодиодный индикатор не начнет мигать синим и красным цветом попеременно. Это означает, что гарнитура находится в "режиме сопряжения", ожидая соединения либо с вашим устройством.
4) Включите Wireless на вашем телефоне и задайте поиск новых устройств.
5) Выберите “AUSDOM M06” для сопряжения. После удачного сопряжения, Гарнитура синий светодиод будет гореть.
6) Если сопряжение не произошло по истечению 1 минуты,
-3повторите шаги 1-5, описанные выше.
Расширенные функции
Примечание: Перед установкой данного продукта, убедитесь, что в ваш компьютер или ноутбук встроенный модуль
Wireless. Если он отсутствует, вы можете приобрести
Wireless адаптер, предпочтительно версию 2.1 или более усовершенствованную версию.
a. Сопряжение наушников с компьютером
1) Убедитесь в том, что наушники выключены.
2) Запустите программу Wireless на вашем компьютере для установки настроек.
3) Всплыветэкран “Search new device”.
4) Расположите устройства на расстоянии не более одного метра друг от друга.
5) Нажмите и удерживайте кнопку питания на одной гарнитуре, пока она не включится. Продолжайте удерживать кнопку питания нажатой, пока светодиодный индикатор не начнет мигать синим и красным цветом попеременно. Это означает, что гарнитура находится в "режиме сопряжения", ожидая соединения либо с вашим устройством.
6) После того как система обнаружила новое устройство и на экране высветилось “AUSDOM M06”, нажмите“AUSDOM
M06” для сопряжения.
7) Если компьютер потребует ввести PIN-код = 0000 (4 нуля), введите «0000». После удачного сопряжения, Гарнитура синий светодиод будет гореть.
8) Если сопряжение не произошло по истечению 1 минуты, повторите шаги 1-7, описанные выше.
b. Сопряжение наушников с телефоном
1) Убедитесь, что наушники выключены.
2) Расположите устройства на расстоянии не более одного метра друг от друга.
3) Нажмите и удерживайте кнопку питания на одной гарнитуре, пока она не включится. Продолжайте удерживать кнопку питания нажатой, пока светодиодный индикатор не начнет мигать синим и красным цветом попеременно. Это означает, что гарнитура находится в "режиме сопряжения", ожидая соединения либо с вашим устройством.
4) Включите Wireless на вашем телефоне и задайте поиск новых устройств.
5) Выберите “AUSDOM M06” для сопряжения. После удачного сопряжения, Гарнитура синий светодиод будет гореть.
6) Если сопряжение не произошло по истечению 1 минуты,
Wireless-гарнитура русский повторите шаги 1-5, описанные выше.
7. Подсоединение к сопряженным устройствам
Для осуществления подключения M06 должен быть ранее сопряжен с вашим устройством Если устройство М06 включено и не находится в режиме сопряжения, оно установит сопряжение автоматически с последним сопряженным устройством, если оно включено. Примечание! На некоторых
ПК и компьютерах Macintoshкаждый раз при подсоединении вам необходимо самостоятельно включатьWireless аудио-устройство.
Команды настроек
1) Регулирование громкости
Функция
Увеличить громкость
Действия
Нажмите одним нажатием или нажмите и удерживайте кнопку увеличения громкости
Уменьшить громкость
Нажмите одним нажатием или нажмите и удерживайте кнопку уменьшения громкости.
Примечание
Когда звук достигает минимального или максимального уровня, вы услышите определенный сигнал.
2) Управление телефонными звонками
Статус
Входящий звонок
Функция
Ответить на звонок
Отклонить вызов
Текущийвызов
Текущий звонок на мобильном телефоне активирует наушники
Завершить вызов
Завершить вызов
Режимсопряжения
Повторно набрать последний набранный номер
-4-
Действия
Нажмите одним нажатием на кнопку вкл/выкл
Нажмите и удерживайте кнопку вкл/выкл в течение 2 секунд
Нажмите одним нажатием на кнопку вкл/выкл
Нажмите одним нажатием на кнопку вкл/выкл
Нажмите одним нажатием на кнопку вкл/выкл 2 раза
Wireless-гарнитура русский
3) Управление проигрывателем
Статус
Отсутствие воспроизведения¹
Процесс воспроизведения
Воспроизведение или его отсутствие²
Функция Действия
Воспроизвести
Остановить воспроизведение
Перейти на следующую дорожку
Воспроизвести повторно дорожку/предыдущая дорожка
Нажмите кнопку «Вос произведение/Пауза»
Нажмите кнопку «Вос произведение/Пауза»
Н а ж м и т е к н о п к у
«Вперед»
Нажмитекнопку «Назад»
¹ Возможно вам нужно будет акцентировать внимание на приложении проигрывателя для первоначального воспроизведения.
² Некоторые проигрыватели поддерживают функцию «Restartthetrack»
(Воспроизвести повторно дорожку), а некоторые – функцию «previous track» (предыдущая дорожка)
Примечание! Если вы отвечаете на звонок или совершаете его во время воспроизведения, музыка автоматически начнет воспроизводиться после завершения звонка.
4) Светодиодный индикатор
Во время заряда
Полный заряд
Режим Standby
(устройство подсоединено)
Режим Standby (устро йство не подсоединено)
Текущийвызов
Индикатор горит красным светом
Красный свет гаснет
Индикатор мигает синим светом каждую секунду
Индикатор горит синим светом
Входящий звонок
Низкий уровень заряда
Сопряжение
Индикатор дважды мигает синим каждые секунды
Индикатор дважды мигает красным светом каждые секунды
Индикатор мигает красным светом
Индикатор мигает попеременно красным и синим светом
-5-
Wireless-гарнитура русский
8. Использованиемобильноготелефонаили M06
* Сигналы о входящем звонке можно услышать через наушники
*Нажмитеоднимнажатиемкнопкувкл/выклдляпринятиявходящег озвонка. Вы также можете нажать на мобильном телефоне
«Принять звонок», но разговаривать через наушники.
Воспроизведениемузыкинаэтовремяприостанавливается.
* Для завершения звонка нажмите одним нажатием кнопку вкл./выкл еще раз. Таким же образом вы можете завершить звонок непосредственно на мобильном телефоне.
* Как только вы прекращаете разговор, автоматически начинается воспроизведение музыки.
9. Использование в качестве проводных наушников
M06 идет в комплекте с разъемом (3,5 мм) на левом наушнике и аудиокабелем для проводного пользования. Это позволяет использовать устройства для развлечений во время полета, устройства, которые не оснащены технологией
Wireless и которые не могут сопрягаться с другими устройствами или когда, уровень заряда батареи очень низкий.
Примечание: Микрофон не работает при использовании наушников с проводным подключением.
Характеристики
Характеристики микрофона
Микрофон: Φ6*5мм
Направленность: однонаправленный
Величина звукового давления: 58±2 при частоте 1 кГц
Импеданс: ≤2.2KΩ
Частотные характеристики: 100 Гц – 10 000 Гц
Рабочее напряжение: 4,5 В
-6-
Wireless-гарнитура
Характеристики динамиков
Диаметр: Φ40 мм
Импеданс: 32Ω
Величина звукового давления: 90±3 при частоте 1 кГц
Номинальная мощность: 20МВт
Общаямощность: 50 МВт
Частотные характеристики:20 Гц-20 000 Гц
Характеристики Wireless
ВерсияWireless: 4.0
Расстояниедействия: 10 м
Частотапередачи: 2.40ГГц-2.48ГГц
Мощность радиопередатчика: класс 2 0.025-2.5МВт
Профиль для дистанционного управления:
HSP/HFP/A2DP/AVRCP русский
Характеристикибатареи
Тип батареи: перезаряжаемая литиевая батарея, 400 мАч
Разъем: Micro USB
Срок действия: около 20 часов при ведении разговоров/около
20 часов при воспроизведении проигрывателя.
Время пребывания в нерабочем состоянии: более 2000 часов
Времязаряда: 2-3 часа
Температураэксплуатации: -10°C-45°C
Температура хранения: -25°C-60°C
Примечание. Функции и технические характеристики могут быть изменены без предварительного уведомления.
-7-
Casque Wireless Français
Merci d’avoir acheté le casque AUSDOM M06 avec technologie sans fil Wireless 4.0. Nous vous encourageons à lire attentivement ce guide d’installation pour bien utiliser ce casque sans fil innovant.
Remarque: S'il vous plaît lire ce manuel attentivement avant d'utiliser, et de le conserver correctement pour référence future.
1. Caractéristiques du produit a) Idéal pour voyage: doux, confortable, casque solide et rotatif pour une utilisation de longuedurée. b) La technologie Wireless V4.0 permet au M06 de communiquer avec un appareil compatible avec Wireless pour une portée de 10 mètres.
c) Possibilité de connexion via câble audio 3,5mmpour écouter de la musique sans vous soucier de l’autonomie de votre batterie. d) Système haut-parleur puissant, vous apporte une expérience audio incroyable.
2. Contenu du paquet
Casque Wireless Câble micro-USB
Câble audio 3,5mm Manuel de l’utilisateur
3. Boutons
1) Augmenter le volume (+) 2) Baisser le volume (-)
3) Mettez bouton on / off 4) Indicateur LED
5) Piste précédente 6) Lecture / pause
7) Piste suivante
8) Interface micro-USB pour recharge
9) Entrée ligne jack 3,5mm2. Contenu du paquet
-1-
Casque Wireless Français
4. Recharge
ATTENTION: Vous devez charger entièrement le casque avant la première utilisation.La durée de lecture varie selon le volume et le contenu audio.
Branchez le câble de recharge USB à n’importe quel port USB alimenté et au connecteur USB sur l’oreillette droite. L’indicateur
LED est rouge pendant la recharge. La durée de charge est généralement de 3 à 6 heures pour la première recharge et de 2
à 3 heures pour toutes les recharges subséquentes.L’indicateur
LED rouge s’éteint lorsque la batterie est pleine.
Remarque: Vous pouvez également utiliser la fonction Wireless lorsque l’unité est en charge. Toutefois, laisser le M06 allumé peut prolonger la durée de charge. Le casque peut également
être éteint et utilisé avec le câble audio inclus avec le produit pendant la recharge sans influencer la durée de charge. Lorsque la batterie est faible, le LED rouge clignote, le M06 sort une faible notification vocable.
5. Allumer et éteindre le produit a) Pour allumer, pressez et maintenez le bouton d’alimentation durant environ 2 à 4 secondes. Vous entendrez un court signal sonore, puis le LED bleu clignote une fois par seconde.
b) Pour éteindre, pressez et maintenez le bouton d’alimentation durant environ 3 à 5 secondes.Vous entendrez un court signal sonore, puis le LED rouge clignote rapidement pendant 1 à 2 secondes.
6. Jumelage avec appareils Wireless
Fonction avancée
Remarque : Avant d’installer le produit, veuillez vous assurer que l’ordinateur ou l’ordinateur portable possède la fonction Wireless intégrée. Si votre ordinateur n’a pas la fonction Wireless, vous devez acheter une clé Wireless, de préférence la version 2.1 ou supérieure.
-2a. Jumelage du casque avec votreordinateur
1) Assurez-vous que le casque soit éteint.
2) Activez le programme Wireless sur votre ordinateur pour commencer le jumelage.
3) “Rechercher nouveau dispositif” s’affiche à l’écran.
4) Placez les deux appareils pas plus de 1 mètre l’un de l’autre.
5) Appuyez longuement le bouton marche arrêt d’un casque et attendez que celui-ci, mais ne relâchez pas encore le bouton.
Attendez pour cela que le voyant LED clignote alternativement en bleu et rouge, ce qui indique que le casque est en mode d’appariement et en attente d’être apparié soit à votre appareil.
6) Aussitôt que le système détecte le nouvel appareil et que vous voyez “AUSDOM M06”, sélectionnez “AUSDOM M06”pour procéder au jumelage.
7) Si votre ordinateur demande d’entrer un code PIN, veuillez saisir 0000 (4 zéros).Une fois le jumelage terminé, le LED bleu du casque reste allumé.
8) Si le jumelage échoue après 60 secondes, veuillez répéter les
étapes 1 à 7.
b. Jumelage du casque avec votre téléphone
1) Assurez-vous que le casque soit éteint.
2) Placez les deux appareils pas plus de 1 mètre l’un de l’autre.
3) Appuyez longuement le bouton marche arrêt d’un casque et attendez que celui-ci, mais ne relâchez pas encore le bouton.
Attendez pour cela que le voyant LED clignote alternativement en bleu et rouge, ce qui indique que le casque est en mode d’appariement et en attente d’être apparié soit à votre appareil.
4) Activez le Wireless sur votre téléphone, puis activez la recherche de nouveau dispositif.
5) Sélectionnez “AUSDOM M06” pour procéder au jumelage.
Une fois le jumelage réussi, le LED bleu du casque reste allumé.
6) Si le jumelage échoue après 60 secondes, veuillez répéter les
étapes 1 à 5.
Fonction avancée
Remarque : Avant d’installer le produit, veuillez vous assurer que l’ordinateur ou l’ordinateur portable possède la fonction Wireless intégrée. Si votre ordinateur n’a pas la fonction Wireless, vous devez acheter une clé Wireless, de préférence la version 2.1 ou supérieure.
Casque Wireless Français a. Jumelage du casque avec votreordinateur
1) Assurez-vous que le casque soit éteint.
2) Activez le programme Wireless sur votre ordinateur pour commencer le jumelage.
3) “Rechercher nouveau dispositif” s’affiche à l’écran.
4) Placez les deux appareils pas plus de 1 mètre l’un de l’autre.
5) Appuyez longuement le bouton marche arrêt d’un casque et attendez que celui-ci, mais ne relâchez pas encore le bouton.
Attendez pour cela que le voyant LED clignote alternativement en bleu et rouge, ce qui indique que le casque est en mode d’appariement et en attente d’être apparié soit à votre appareil.
6) Aussitôt que le système détecte le nouvel appareil et que vous voyez “AUSDOM M06”, sélectionnez “AUSDOM M06”pour procéder au jumelage.
7) Si votre ordinateur demande d’entrer un code PIN, veuillez saisir 0000 (4 zéros).Une fois le jumelage terminé, le LED bleu du casque reste allumé.
8) Si le jumelage échoue après 60 secondes, veuillez répéter les
étapes 1 à 7.
b. Jumelage du casque avec votre téléphone
1) Assurez-vous que le casque soit éteint.
2) Placez les deux appareils pas plus de 1 mètre l’un de l’autre.
3) Appuyez longuement le bouton marche arrêt d’un casque et attendez que celui-ci, mais ne relâchez pas encore le bouton.
Attendez pour cela que le voyant LED clignote alternativement en bleu et rouge, ce qui indique que le casque est en mode d’appariement et en attente d’être apparié soit à votre appareil.
4) Activez le Wireless sur votre téléphone, puis activez la recherche de nouveau dispositif.
5) Sélectionnez “AUSDOM M06” pour procéder au jumelage.
Une fois le jumelage réussi, le LED bleu du casque reste allumé.
6) Si le jumelage échoue après 60 secondes, veuillez répéter les
étapes 1 à 5.
-3-
Casque Wireless Français
7. Connexion aux appareils jumelés
Le M06 doit avoir été jumelé avec votre appareil avant de pouvoir se connecter.
Lorsque le M06 est allumé et n’est pas sous mode jumelage,il se jumèle automatiquement avec le dernier appareil jumelé (lorsqu’il est allumé).
Remarque: Sur certains ordinateurs PC et Mac, il faut activer le
Wireless audio manuellement à chaque fois que vous vous connectez.
Instructions
1) Réglage du volume
Fonction
Augmenter le volume
Diminuer le volume
Opération
Appuyez brièvement ou appuyez sans relâcher le bouton V+
Appuyez brièvement ou appuyez sans relâcher le bouton V-
Notes
Si le volume atteint le volume maximal ou le volume minimal, le produit sort un court signal sonore.
2) Contrôle des appels téléphoniques
Statut
Appel entrant
Appel en cours
Appel en cours, téléphonecellulaire activé
Connecté au mode jumelage
Fonction
Répondre à un appel
Rejeter un appel
Terminer un appel
Terminer un appel
Opération
Appuyez brièvement le bouton d’alimentation
Appuyez sans relâcher le bouton d’alimentation pendant environ
2 secondes
Appuyez brièvement le bouton d’alimentation
Appuyez brièvement le bouton d’alimentation
Recomposer le dernier numéro appelé
Appuyez brièvement deux fois le bouton d’alimentation
-4-
Casque Wireless Français
3) Commande de lecture
Statut
Pas de média¹
Lecture de média
Fonction
Pour lire le média
Opération
Appuyez le bouton
Play/Pause
Pour mettre en pause la lecture de média
Appuyez le bouton
Play/Pause
Lecture de média en cours ou lecture de média stoppée²
Pour sauter à la chanson suivante
Appuyez le bouton suivant
Pour rejouer la chanson depuis le début/pour jouer la chanson précédente
Appuyez le bouton précédent
¹ Vous devez vous concentrer sur l’application lecteur média pour démarrer la lecture initiale.
² Certains lecteurs média supportent Rejouer depuis le début, certains supportent Jouer la chanson précédente.
Remarque: Si vous faites un appel ou si vous répondez à un appel tout en écoutant de la musique, lelecteur média/la musique redémarrera automatiquement une fois l’appel terminé.
4) Indicateur LED
Pendant la charge
Charge complète
En veille (pas connecté)
En veille (connecté)
Appel en cours
Appel entrant
Faible batterie
Jumelage
Indicateur LED rouge allumé
Indicateur LED rouge éteint
L’indicateur LED bleu clignotera une fois par seconde
Indicateur LED bleu allumé
L’indicateur LED bleu clignotera deux fois toutes les seconde
L’indicateur LED rouge clignotera deux fois chaque seconde
L’indicateur LED rouge clignotera
Les indicateurs LED rouge et bleu clignoteront alternativement.
-5-
Casque Wireless Français
8. Utilisation d’un téléphone portable ou M06
* Le casque sonne lorsqu’un appel entre.
* Appuyez le bouton d’alimentation pour répondre à un appel entrant.
Vous pouvez également appuyer le bouton Répondre se trouvant sur votre téléphone portable pour recevoir l’appel sur votre cellulaire. La musique stoppe temporairement.
* Pour terminer un appel, il suffit tout simplement deré-appuyer sur le bouton d’alimentation. De même, vous pouvez terminer l’appel directement sur votre téléphone cellulaire.
* La musique reprend automatiquement dès terminaison de l’appel.
9. Utilisation casque sans fil
Le M06 est livré avec un câble audio 3,5mm sur l’oreillette gauche et un câble audio pourl’utilisation sans fil. Les câblespeuvent être utilisésavecles appareils de divertissement dans l’avion, les appareils sans Wireless, les appareils non-jumelés, ou encore lorsque la batterie est déchargée.
Remarque: Le microphone ne fonctionne pas lorsque le casque est utilisé comme casque sans fil.
Spécifications
Spécifications du microphone
Microphone: Φ6*5mm
Directivité: Omnidirectionnelle
S.P.L:-58±2DB S.P.L à 1KHz
Impédance: ≤2,2KΩ
Gamme de fréquence: 100Hz-10000Hz
Voltage: 4,5V
Spécifications du haut-parleur
Diamètre du haut-parleur: Φ40mm
Impédance: 32Ω
S.P.L: 90±3Db S.P.L à 1KHz
Puissance nominale: 20mW
Capacité globale: 50mW
Gamme de fréquence : 20Hz-20000Hz
-6-
Casque Wireless
Spécifications du Wireless
Version Wireless: 4.0
Distance du Wireless: 10m
Fréquence de transmission: 2,40GHz-2,48GHz
Puissance de transmission: Classe 2 0,025-2,5Mw
Profil de support: HSP/HFP/A2DP/AVRCP
Français
Spécifications de la batterie
Type de batterie: batterie au lithium rechargeable 400mah
Port de charge: micro-USB
Durée de fonctionnement: environ 20 heuresà discuter/ environ
20 heures d’envoi de musique
Durée d’attente: plus de 2000 heures
Durée de charge: 2 à 3 heures
Température de fonctionnement: -10°C - 45°C
Température de stockage : -25°C-60°C
Remarque : Les caractéristiques et les spécifications pourront
être modifiées sans avis préalable.
-7-
Auriculares Wireless Español
Gracias por adquirir los auriculares M06 de AUSDOM con tecnología inalámbrica Wireless 4.0. Le recomendamos que lea atentamente esta breve guía de instalación para sacarle el máximo partido a sus auriculares inalámbricos únicos en el mercado.
Nota: Por favor, lea este manual de usuario antes de utilizar, y mantenerlo adecuadamente para futuras consultas.
1. Características del producto a) Son ideales para viajar: su estructura sólida y cómoda, así como su flexibilidad y su capacidad para girarse, hacen que estos auriculares sean perfectos para un uso prolongado.
b) Gracias a la tecnología Wireless 4.0, los auriculares M06 se pueden conectar a otros dispositivos con Wireless activado a una distancia de 10 metros.
c) Se puede conectar un cable de audio de 3,5 mm a los auriculares para transmitir música sin que se agote la batería.
d) Su potente altavoz de graves le ofrece una calidad de audio excepcional.
2. Contenido del paquete
Auriculares Wireless Cable Micro USB
Cable de audio de 3,5 mm Guía de usuario
3. Función de los botones
1) Subir volumen (+) 2) Bajar volumen (-)
3) Botón de encendido / apagado 4) Indicador LED
5) Pista anterior 6) Botón de reproducción / pausa
7) Siguiente pista 8) Interface para carga Micro USB
9) jack de 3.5mm cable de audio
-1-
Auriculares Wireless Español
4. Carga
ATENCIÓN: antes de usarlos por primera vez, cargue por completo los auriculares.El tiempo de juego varía según el nivel del volumen y el contenido de audio.
Conecte el cable cargador USB en cualquier puerto USB y en el conector USB situado en el auricular derecho. Durante la carga, se encenderá la luz roja del indicador LED. Normalmente, el tiempo de la primera carga es de 3 a 6 horas y el de las cargas posteriores es de 2 a 3 horas. Una vez se haya cargado la batería, la luz roja del indicador LED se apagará.
Nota: durante la carga, se puede utilizar también la función de
Wireless, sin embargo, si los auriculares M06 permanecen encendidos, el tiempo de carga puede ser mayor. Los auriculares también se pueden apagar y utilizar con el cable de audio durante la carga. Esto no afecta al tiempo de carga.
Cuando quede poca batería, la luz roja del indicador LED parpadeará. M06 también incluye una notificación de voz para indicar que queda poca batería.
5. Encendido y apagado de los auriculares M06 a) Para encender los auriculares, mantenga pulsado el botón de encendido durante 2 a 4 segundos, aproximadamente. A continuación, escuchará un tono breve y la luz azul del indicador
LED parpadeará a razón de una vez por segundo. b) Para apagar los auriculares, mantenga pulsado el botón de encendido durante 3 a 5 segundos, aproximadamente. A continuación, escuchará un tono breve y la luz roja del indicador
LED parpadeará rápidamente durante 1 a 2 segundos, aproximadamente.
6. Sincronización con dispositivos Wireless
Función avanzada
Nota: antes de instalar este producto, asegúrese de que su ordenador o portátil cuenta con Wireless integrado. Si su
-2ordenador no dispone de Wireless, deberá adquirir un adaptador de Wireless, preferentemente, versión 2.1 o posterior.
a. Sincronización de sus auriculares con su ordenador
1) Asegúrese de que los auriculares están apagados.
2) Active y abra el programa de Wireless de su ordenador para comenzar la configuración.
3) A continuación, aparecerá la pantalla de búsqueda de nuevos dispositivos.
4) Coloque los dos dispositivos a una distancia máxima de un metro.
5) Mantenga pulsado el botón de encendido de uno de los auriculares hasta que se encienda el auricular y no lo suelte hasta que el indicador LED parpadee en azul y rojo alternadamente.
Esto indica que los auriculares están en “modo de emparejamiento”, a la espera de ser emparejados con su dispositivo.
6) En cuanto el sistema detecte un nuevo dispositivo y vea la leyenda “AUSDOM M06”, seleccione “AUSDOM M06” para iniciar la sincronización.
7) Si el sistema le solicita introducir el código PIN = 0000 (esto es, cuatro ceros). El sistema le indicará que introduzca el código
PIN, en tal caso, introduzca “0000”. Una vez sincronizados los dispositivos, la los LEDs azules auriculares estarán en forma continua.
8) Si, una vez transcurridos 60 segundos, no se ha producido la sincronización, repita los pasos 1 a 7 indicados anteriormente.
b. Sincronización de sus auriculares con su teléfono
1) Asegúrese de que los auriculares están apagados.
2) Coloque los dos dispositivos a una distancia máxima de un metro.
3) Mantenga pulsado el botón de encendido de uno de los auriculares hasta que se encienda el auricular y no lo suelte hasta que el indicador LED parpadee en azul y rojo alternadamente.
Esto indica que los auriculares están en “modo de emparejamiento”, a la espera de ser emparejados con su dispositivo.
4) Active el Wireless de su teléfono y seleccione la opción correspondiente para buscar nuevos dispositivos.
5) Seleccione el dispositivo “AUSDOM M06” para iniciar la sincronización. Una vez sincronizados los dispositivos, la los
LEDs azules auriculares estarán en forma continua.
6) Si, una vez transcurridos 60 segundos, no se ha producido la sincronización, repita los pasos 1 a 5 indicados anteriormente.
Auriculares Wireless Español ordenador no dispone de Wireless, deberá adquirir un adaptador de Wireless, preferentemente, versión 2.1 o posterior.
a. Sincronización de sus auriculares con su ordenador
1) Asegúrese de que los auriculares están apagados.
2) Active y abra el programa de Wireless de su ordenador para comenzar la configuración.
3) A continuación, aparecerá la pantalla de búsqueda de nuevos dispositivos.
4) Coloque los dos dispositivos a una distancia máxima de un metro.
5) Mantenga pulsado el botón de encendido de uno de los auriculares hasta que se encienda el auricular y no lo suelte hasta que el indicador LED parpadee en azul y rojo alternadamente.
Esto indica que los auriculares están en “modo de emparejamiento”, a la espera de ser emparejados con su dispositivo.
6) En cuanto el sistema detecte un nuevo dispositivo y vea la leyenda “AUSDOM M06”, seleccione “AUSDOM M06” para iniciar la sincronización.
7) Si el sistema le solicita introducir el código PIN = 0000 (esto es, cuatro ceros). El sistema le indicará que introduzca el código
PIN, en tal caso, introduzca “0000”. Una vez sincronizados los dispositivos, la los LEDs azules auriculares estarán en forma continua.
8) Si, una vez transcurridos 60 segundos, no se ha producido la sincronización, repita los pasos 1 a 7 indicados anteriormente.
b. Sincronización de sus auriculares con su teléfono
1) Asegúrese de que los auriculares están apagados.
2) Coloque los dos dispositivos a una distancia máxima de un metro.
3) Mantenga pulsado el botón de encendido de uno de los auriculares hasta que se encienda el auricular y no lo suelte hasta que el indicador LED parpadee en azul y rojo alternadamente.
Esto indica que los auriculares están en “modo de emparejamiento”, a la espera de ser emparejados con su dispositivo.
4) Active el Wireless de su teléfono y seleccione la opción correspondiente para buscar nuevos dispositivos.
5) Seleccione el dispositivo “AUSDOM M06” para iniciar la
-3sincronización. Una vez sincronizados los dispositivos, la los
LEDs azules auriculares estarán en forma continua.
6) Si, una vez transcurridos 60 segundos, no se ha producido la sincronización, repita los pasos 1 a 5 indicados anteriormente.
ordenador no dispone de Wireless, deberá adquirir un adaptador de Wireless, preferentemente, versión 2.1 o posterior.
a. Sincronización de sus auriculares con su ordenador
1) Asegúrese de que los auriculares están apagados.
2) Active y abra el programa de Wireless de su ordenador para comenzar la configuración.
3) A continuación, aparecerá la pantalla de búsqueda de nuevos dispositivos.
4) Coloque los dos dispositivos a una distancia máxima de un metro.
5) Mantenga pulsado el botón de encendido de uno de los auriculares hasta que se encienda el auricular y no lo suelte hasta que el indicador LED parpadee en azul y rojo alternadamente.
Esto indica que los auriculares están en “modo de emparejamiento”, a la espera de ser emparejados con su dispositivo.
6) En cuanto el sistema detecte un nuevo dispositivo y vea la leyenda “AUSDOM M06”, seleccione “AUSDOM M06” para iniciar la sincronización.
7) Si el sistema le solicita introducir el código PIN = 0000 (esto es, cuatro ceros). El sistema le indicará que introduzca el código
PIN, en tal caso, introduzca “0000”. Una vez sincronizados los dispositivos, la los LEDs azules auriculares estarán en forma continua.
8) Si, una vez transcurridos 60 segundos, no se ha producido la sincronización, repita los pasos 1 a 7 indicados anteriormente.
b. Sincronización de sus auriculares con su teléfono
1) Asegúrese de que los auriculares están apagados.
2) Coloque los dos dispositivos a una distancia máxima de un metro.
3) Mantenga pulsado el botón de encendido de uno de los auriculares hasta que se encienda el auricular y no lo suelte hasta que el indicador LED parpadee en azul y rojo alternadamente.
Esto indica que los auriculares están en “modo de emparejamiento”, a la espera de ser emparejados con su dispositivo.
4) Active el Wireless de su teléfono y seleccione la opción correspondiente para buscar nuevos dispositivos.
5) Seleccione el dispositivo “AUSDOM M06” para iniciar la
Auriculares Wireless Español sincronización. Una vez sincronizados los dispositivos, la los
LEDs azules auriculares estarán en forma continua.
6) Si, una vez transcurridos 60 segundos, no se ha producido la sincronización, repita los pasos 1 a 5 indicados anteriormente.
7. Conexión con los dispositivos sincronizados
Antes de conectarse, debe haber sincronizado los auriculares
M06 con su dispositivo.
Cuando se enciendan los auriculares M06 en cualquier modo, salvo en el modo de sincronización, los auriculares M06 se sincronizarán automáticamente con el último dispositivo sincronizado.
Nota: En algunos PC y Mac, deberá activar de forma manual el audio por Wireless cada vez que se conecte.
Instrucciones de control
1) Controles del volumen
Función
Subir el volumen
Bajar el volumen
Operación
Pulse una vez o mantenga pulsado el botón «V+»
Pulse una vez o mantenga pulsado el botón «V-»
Notas
Cuando el volumen alcance su punto máximo o mínimo, se escuchará un tono breve
2) Controles de llamada del teléfono
Estado Función
Contestar una llamada
Llamada entrante
Rechazar una llamada
Operación
Pulse una vez el botón de encendido
Mantenga pulsado el botón de encendido durante 2 segundos
Llamada en curso
Auricular del teléfono móvil activado durante llamada en curso
Modo de sincronización conectado
Rellamada
-4-
Pulse el botón de encendido dos veces
Auriculares Wireless Español
3) Controles de reproducción de archivos multimedia
Estado
No se están reproduciendo archivos multimedia¹
Función
Reproducir archivos multimedia
Operación
Pulse el botón
«Play/Pause»
Se están reproduciendo archivos multimedia
Pausar la reproducción de archivos multimedia
Pulse el botón
«Play/Pause»
O bien se están reproduciendo archivos multimedia o bien se ha detenido la reproducción²
Volver a reproducir la pista actual o la pista anterior
Pulse el botón de pista anterior
¹Puede que deba acudir a la aplicación del reproductor multimedia para que la reproducción inicial comience.
²Algunos reproductores multimedia tienen la opción de volver a reproducir la pista actual y, otros, de reproducir la pista anterior.
Nota: Si, mientras escucha archivos multimedia, contesta o hace una llamada, los archivos multimedia o la música comenzarán automáticamente una vez finalice la llamada.
4) Estados del indicador LED
Durante la carga
Carga completa
En espera (sin conexión)
En espera (con conexión)
Llamada en curso
Llamada entrante
Batería baja
Sincronización
Luz LED roja encendida
Luz LED roja apagada
Parpadeo de la luz LED azul a razón de una vez cada segundo
Luz LED azul encendida
Parpadeo de la luz LED azul a razón de dos veces cada Segundo
Parpadeo de la luz LED roja a razón de dos veces cada Segundo
Parpadeo de la luz LED roja
Parpadeo alternativo de las luces LED roja y azul
-5-
Auriculares Wireless Español
8. Cómo usar un teléfono móvil o M06
* Cuando reciba una llamada, escuchará el tono de llamada desde los auriculares.
* Pulse una vez el botón de encendido para contestar la llamada entrante. También puede pulsar el botón correspondiente en su teléfono móvil para contestar la llamada desde sus auriculares. La reproducción de música se pausará.
* Para finalizar la llamada, pulse de nuevo el botón de encendido.
Como se ha indicado anteriormente, también puede finalizar la llamada directamente desde su teléfono móvil.
* En cuanto finalice la llamada, la reproducción de música se reanudará de forma automática.
9. Cómo usar auriculares con cable
M06 incluye un conector de audio de 3,5 mm situado en el auricular izquierdo y un cable de audio para conectar los auriculares. Gracias a este cable, podrá disfrutar de sus auriculares en dispositivos en modo vuelo o en dispositivos sin conexión Wireless o que no estén sincronizados con M06 o, simplemente, cuando la batería se haya agotado.
Nota: Cuando se usan los auriculares con el cable, no se puede utilizar el micrófono.
Especificaciones técnicas
Especificaciones técnicas del micrófono
Unidad del micrófono: Φ 6 x 5 mm
Directividad: omnidireccional
Nivel de presión sonora (SPL): -58±2 dB SPL a 1 KHz
Impedancia: ≤ 2.2 KΩ
Respuesta en frecuencia: 100 Hz - 10.000 Hz
Tensión: 4.5 V
-6-
Auriculares Wireless
Especificaciones técnicas del altavoz
Diámetro del altavoz: 40 mm
Impedancia: 32Ω
Nivel de presión sonora (SPL): 90±3 dB SPL a 1 KHz
Potencia nominal: 20 mW
Capacidad total: 50 mW
Respuesta en frecuencia: 20 Hz - 20.000 Hz
Especificaciones técnicas del Wireless
Versión de Wireless: 4.0
Alcance del Wireless: 10 m
Frecuencia de transmisión: 2,40 GHz - 2,48 GHz
Potencia de transmisión: Clase 2 0,025 - 2,5 Mw
Perfil Wireless: HSP/HFP/A2DP/AVRCP
Español
Especificaciones técnicas de la batería
Tipo de batería: batería de litio recargable de 400 mAh
Puerto de carga: Micro USB
Autonomía: 20 horas de llamadas y 20 horas de música
Tiempo de espera: Más de 2000 horas
Tiempo de carga: 2 a 3 horas
Temperatura de funcionamiento: -10°C- 45°C
Temperatura de almacenamiento: -25°C - 60°C
Nota: las funciones y especificaciones están sujetas a cambios sin previo aviso.
-7-
Cuffie Wireless In Italiano
Grazie per aver acquistato le cuffie AUSDOM M06 con tecnologia Wireless 4.0 Wireless; vi esortiamo a leggere questa guida all’installazione veloce da cima a fondo per ottenere il massimo da queste innovative cuffie wireless.
Nota: Si prega di leggere attentamente il presente manuale prima di utilizzare, e tenerlo correttamente per riferimento futuro.
1. Caratteristiche del Prodotto a) Grande per chi viaggia : cuffie soffici, confortevoli, solide e girevoli per un utilizzo che dura nel tempo.
b) Tecnologia Wireless V4.0 che permette a M06 di comunicare con il vostro dispositivo fornito di Wireless entro un campo di 10 metri.
c) Connessione facoltativa tramite cavo audio da 3.5mm per un flusso di musica continuo, senza preoccuparsi che la batteria si scarichi.
d) Altoparlante con bassi potenti e ricchi per una straordinaria esperienza audio.
2. Contenuto della Confezione
Cuffie Wireless Cavo Micro USB
Cavo Audio 3.5mm Manuale d’Uso
3. Funzione dei tasti
1) Volume su (+) 2) Volume giù (-)
3) Potere On / off 4) Indicatore LED
5) Traccia precedente 6) Pulsante Play / Pausa
7) Traccia successiva 8) Interfaccia Micro USB per la ricarica
9) Spinotto da 3.5mm linea-in
-1-
Cuffie Wireless In Italiano
4. Ricarica
ATTENZIONE: Ricaricare completamente le cuffie prima del primo utilizzo.Il tempo di riproduzione varia a seconda del livello del volume e del contenuto audio.
Collegare il cavo di ricarica USB a una qualsiasi porta USB e allo spinotto USB sulla coppa dell’orecchio destro. L’indicatore LED rosso resterà acceso durante la ricarica. Il tempo di ricarica è di solito di 3-6 ore per la prima ricarica e 2-3 ore per le ricariche seguenti. Quando la batteria è completamente carica, l’indicatore
LED rosso si spegnerà.
Nota: Potete anche usare la funzione Wireless quando l’apparecchio è in ricarica, ma lasciare M06 acceso può prolungare il tempo di ricarica. Le cuffie possono anche venire spente e usate con l’accluso cavo audio durante la ricarica. Ciò non comprometterà il tempo di ricarica.
Quando la batteria è bassa, la luce LED rossa lampeggerà. M06 invierà anche la notifica vocale di batteria scarica.
5. Alimentazione on / off a) Per accendere, premere e tenere premuto il tasto di alimentazione per circa 2-4 secondi; sentirete un segnale acustico e la luce
LED blu lampeggerà una volta al secondo.
b) Per spegnere, premere e tenere premto il tasto di alimentazione per circa 3-5 secondi; sentirete un segnale acustico e la luce
LED blu lampeggerà velocemente per 1-2 secondi.
6. Abbinamento con dispositivi Wireless
Operazioni avanzate
Nota: Prima di installare questo prodotto, si prega di assicurasi che il proprio computer o laptop abbia a disposizione la funzione
Wireless incorporata. Se il computer non è abilitato a Wireless, dovete acquistare una chiavetta Wireless, preferibilmente in versione 2.1 o superiore.
-2a. Abbinamento delle cuffie con il computer
1) Assicurarsi che le cuffie siano spente.
2) Attivare il programma Wireless sul computer per iniziare l’impostazione.
3) Apparirà il messaggio “Ricerca nuovo dispositivo”.
4) Collocare i due dispositivi a non più di un metro di distanza l’uno dall’altro.
5) Premere e tenere premuto il pulsante di alimentazione su una cuffia fino a che non si accende, ma non lasciarlo. Continuare a tenere premuto il pulsante di alimentazione fino a che l’indicatore
LED non lampeggia di colore blu e rosso in modalità alternata, il che significa che la cuffia è in “modalità abbinamento”, e attende di essere abbinata al proprio dispositivo
6) Non appena il sistema rileva il nuovo dispositivo e vedere la scritta “AUSDOM M06”, selezionate “AUSDOM M06” per abbinare.
7) Se il computer vi chiede di immettere il codice PIN = 0000 (4 zero). Vi verrà chiesto di immettere un codice PIN, siete pregati di usare “0000”. Una volta abbinato con successo, la luce LED blu delle cuffie resterà accesa.
8) Se l’abbinamento fallisce dopo 60 secondi, si prega di ripetere i passi da 1 a 7 descritti sopra.
b. Abbinamento delle cuffie con il telefono
1) Assicurarsi che le cuffie siano spente.
2) Collocare i dispositive a non più di un metro di distanza l’uno dall’altro.
3) Premere e tenere premuto il pulsante di alimentazione su una cuffia fino a che non si accende, ma non lasciarlo. Continuare a tenere premuto il pulsante di alimentazione fino a che l’indicatore
LED non lampeggia di colore blu e rosso in modalità alternata, il che significa che la cuffia è in “modalità abbinamento”, e attende di essere abbinata al proprio dispositivo
4) Attivare il Wireless sul telefonino e impostare la ricerca di nuovi dispositivi.
5) Selezionare “AUSDOM M06” per abbinare. Una volta abbinato con successo, la luce LED blu delle cuffie resterà accesa.
6) Se l’abbinamento fallisce dopo 60 secondi, si prega di ripetere i passi da 1 a 5 descritti sopra.
Operazioni avanzate
Nota: Prima di installare questo prodotto, si prega di assicurasi che il proprio computer o laptop abbia a disposizione la funzione
Wireless incorporata. Se il computer non è abilitato a Wireless, dovete acquistare una chiavetta Wireless, preferibilmente in versione 2.1 o superiore.
Cuffie Wireless In Italiano a. Abbinamento delle cuffie con il computer
1) Assicurarsi che le cuffie siano spente.
2) Attivare il programma Wireless sul computer per iniziare l’impostazione.
3) Apparirà il messaggio “Ricerca nuovo dispositivo”.
4) Collocare i due dispositivi a non più di un metro di distanza l’uno dall’altro.
5) Premere e tenere premuto il pulsante di alimentazione su una cuffia fino a che non si accende, ma non lasciarlo. Continuare a tenere premuto il pulsante di alimentazione fino a che l’indicatore
LED non lampeggia di colore blu e rosso in modalità alternata, il che significa che la cuffia è in “modalità abbinamento”, e attende di essere abbinata al proprio dispositivo
6) Non appena il sistema rileva il nuovo dispositivo e vedere la scritta “AUSDOM M06”, selezionate “AUSDOM M06” per abbinare.
7) Se il computer vi chiede di immettere il codice PIN = 0000 (4 zero). Vi verrà chiesto di immettere un codice PIN, siete pregati di usare “0000”. Una volta abbinato con successo, la luce LED blu delle cuffie resterà accesa.
8) Se l’abbinamento fallisce dopo 60 secondi, si prega di ripetere i passi da 1 a 7 descritti sopra.
b. Abbinamento delle cuffie con il telefono
1) Assicurarsi che le cuffie siano spente.
2) Collocare i dispositive a non più di un metro di distanza l’uno dall’altro.
3) Premere e tenere premuto il pulsante di alimentazione su una cuffia fino a che non si accende, ma non lasciarlo. Continuare a tenere premuto il pulsante di alimentazione fino a che l’indicatore
LED non lampeggia di colore blu e rosso in modalità alternata, il che significa che la cuffia è in “modalità abbinamento”, e attende di essere abbinata al proprio dispositivo
4) Attivare il Wireless sul telefonino e impostare la ricerca di nuovi dispositivi.
5) Selezionare “AUSDOM M06” per abbinare. Una volta abbinato con successo, la luce LED blu delle cuffie resterà accesa.
6) Se l’abbinamento fallisce dopo 60 secondi, si prega di ripetere
-3i passi da 1 a 5 descritti sopra.
Operazioni avanzate
Nota: Prima di installare questo prodotto, si prega di assicurasi che il proprio computer o laptop abbia a disposizione la funzione
Wireless incorporata. Se il computer non è abilitato a Wireless, dovete acquistare una chiavetta Wireless, preferibilmente in versione 2.1 o superiore.
a. Abbinamento delle cuffie con il computer
1) Assicurarsi che le cuffie siano spente.
2) Attivare il programma Wireless sul computer per iniziare l’impostazione.
3) Apparirà il messaggio “Ricerca nuovo dispositivo”.
4) Collocare i due dispositivi a non più di un metro di distanza l’uno dall’altro.
5) Premere e tenere premuto il pulsante di alimentazione su una cuffia fino a che non si accende, ma non lasciarlo. Continuare a tenere premuto il pulsante di alimentazione fino a che l’indicatore
LED non lampeggia di colore blu e rosso in modalità alternata, il che significa che la cuffia è in “modalità abbinamento”, e attende di essere abbinata al proprio dispositivo
6) Non appena il sistema rileva il nuovo dispositivo e vedere la scritta “AUSDOM M06”, selezionate “AUSDOM M06” per abbinare.
7) Se il computer vi chiede di immettere il codice PIN = 0000 (4 zero). Vi verrà chiesto di immettere un codice PIN, siete pregati di usare “0000”. Una volta abbinato con successo, la luce LED blu delle cuffie resterà accesa.
8) Se l’abbinamento fallisce dopo 60 secondi, si prega di ripetere i passi da 1 a 7 descritti sopra.
b. Abbinamento delle cuffie con il telefono
1) Assicurarsi che le cuffie siano spente.
2) Collocare i dispositive a non più di un metro di distanza l’uno dall’altro.
3) Premere e tenere premuto il pulsante di alimentazione su una cuffia fino a che non si accende, ma non lasciarlo. Continuare a tenere premuto il pulsante di alimentazione fino a che l’indicatore
LED non lampeggia di colore blu e rosso in modalità alternata, il che significa che la cuffia è in “modalità abbinamento”, e attende di essere abbinata al proprio dispositivo
4) Attivare il Wireless sul telefonino e impostare la ricerca di nuovi dispositivi.
5) Selezionare “AUSDOM M06” per abbinare. Una volta abbinato con successo, la luce LED blu delle cuffie resterà accesa.
6) Se l’abbinamento fallisce dopo 60 secondi, si prega di ripetere
Cuffie Wireless In Italiano i passi da 1 a 5 descritti sopra.
7. Connettere dispositivi abbinati
M06 deve essere stato preventivamente abbinato con il vostro dispositivo prima che possiate collegarlo
Quando M06 è acceso e non in modalità abbinamento, M06 si abbinerà automaticamente con l’ultimo dispositivo abbinato quando viene acceso.
Nota: Su alcuni PC e computer Mac dovrete abilitare manualmente l’audio Wireless ogni volta che lo collegate
Istruzioni di controllo
1) Controllo del Volume
Funzione
Alzare il volume
Abbassare il volume
Operazione
Premere una volta o premere e tenerepremuto il tasto di Volume Su V+
Premere una volta o premere e tenerepremuto il tasto di Volume Giù V-
Note
Quando il volume raggiunge il livello minimo o massimo, ci sarà un segnale acustico
2) Controllo delle Chiamate telefoniche
Stato
Chiamata in arrivo
Funzione
Rispondere a una chiamata
Rigfiutare una chiamata
Terminare una chiamata
Chiamata in corso
Chiamata in corso con il telefono cellulare portatile attivo
Terminare una chiamata
Modalità di abbinamento connessa
Ricomporre l’ultimo numero
Operazione
Premere una volta il tasto Alimentazione
Premere e tenere premuto il tasto Alimentazione per 2 secondi
Premere una volta il tasto Alimentazione
Premere una volta il tasto Alimentazione
Premere brevemente il tasto Alimentazione per
2 volte
-4-
Cuffie Wireless In Italiano
3) Controlli di Riproduzione Media
Stato
Nessun media in riproduzione¹
Funzione
Riproduce il media
Media in riproduzione
Mette in pausa la riproduzione
Media in riproduzione o fermato²
Salta alla traccia successiva
Ricomincia la traccia
/traccia precedente
Operazione
Premere il tasto
Play/Pausa
Premere il tasto
Play/Pausa
Premere il tasto avanti
Premere il tasto indietro
¹ Potrebbe essere necessario focalizzare sull’applicazione del riproduttore media per avviare l’iniziale riproduzione.
²Alcuni riproduttori media supportano il riavvio della traccia, altri supportano la traccia precedente.
Nota: Se rispondete o eseguite una chiamata mentre ascoltate un media, il media/la musica si riavvierà automaticamente al termine della chiamata.
4) Indicatore LED di Stato
Durante la ricarica
Ricarica completa
Standby (non connesso)
Standby (connesso)
Chiamata in corso
Chiamata in arrivo
Batteria scarica
Abbinamento in corso
Luce LED rossa accesa
Luce LED rossa spenta
Luce LED blu lampeggerà una volta ogni secondo
Luce LED blu accesa
Luce LED blu lampeggerà due volte ogni secondi
Luce LED rossa lampeggerà due volte ogni second
Luce LED rossa lampeggerà
Luce LED rossa e blu lampeggeranno alternativamente
-5-
Cuffie Wireless In Italiano
8. Utilizzare un telefono cellulare o M06
* Quando c’è una telefonata in arrivo, le cuffie squilleranno.
* Premere una volta il tasto di Alimentazione per rispondere alla chiamata in arrivo. Potete anche premere il tasto di risposta sul telefono cellulare per ricevere la chiamata in cuffia. La riproduzione musicale si interromperò temporaneamente.
* Per chiudere una chiamata, basta premere di nuovo il tasto di
Alimentazione. Allo stesso modo, potete anche chiudere la chiamata direttamente dal telefono cellulare.
* Non appena riagganciate, la riproduzione musicale riprenderà automaticamente.
9. Utilizzare cuffie via cavo
M06 viene fornito con uno spinotto audio da 3.5mm sulla coppa auricolare sinistra e un cavo audio per uso cablato. Ciò permette di usare i dispositivi di intrattenimento durante il volo, dispositivi non forniti di Wireless o non abbinati, o quando la batteria è scarica.
Nota: Il microfono non può funzionare quando le cuffie vengono utilizzate in modalità cablata.
Specifiche
Specifiche del Microfono
Unità Microfono: Φ6*5mm
Direttività: Omni-direzionale
S.P.L:-58±2DB S.P.L a 1KHz
Impedenza:≤2.2KΩ
Risposta di Frequenza:100Hz-10,000Hz
Voltaggio operativo:4.5V
-6-
Cuffie Wireless
Specifiche Altoparlante
Diametro altoparlante: Φ40mm
Impedenza: 32Ω
S.P.L: 90±3Db S.P.L a 1KHz
Tasso di Potenza : 20mW
Capacità di Aggregazione:50mW
Risposta di frequenza: 20Hz-20,000Hz
Specifiche Wireless
Versione Wireless: 4.0
Distanza Wireless: 10m
Frequenza di trasmissione: 2.40GHz-2.48GHz
Potenza di trasmissione: Classe 2 0.025-2.5Mw
Profilo supportato: HSP/HFP/A2DP/AVRCP
In Italiano
Specifiche Batteria
Tipo di batteria: batteria al litio ricaricabile 400mah
Porta di ricarica: Micro USB
Tempo di funzionamento: circa 20 ore di conversazione/circa 20 ore di riproduzione musicale
Tempo di Standby: più di 2000 ore
Tempo di ricarica: 2-3 ore
Temperatura di funzionamento: -10°C-45°C
Temperatura di conservazione: -25°C-60°C
Nota: funzionalità e specifiche sono soggette a variazioni senza preavviso.
-7-
ブルートゥースヘッドセット 日本語
AUSDOM M06 Wirelessヘッドセットのご購入ありがとうござ
いました。 モデル形式は、 0ワイヤレス技術
が使用されています。製品の機能と使用方法全体をご理解い
ただくためにお時間を取って注意深くこのユーザーマニュア
ルをお読みください。
注:慎重使用する前に、このマニュアルを読み、今後の参考の
ために適切に保管してください。
1 .製品機能 a) 旅行の最高のお供です。柔らかくて気持ちのいいイヤーマ
フ、イヤーキャップも回転可能なデザインで人間工学に基づ
いた設計となっています。 b) Wireless version 4.0 ワイヤレス技術で 通信距離は10
メ―トル、スムーズで快適な通信です。 c) 3.5
mmのの音声ケーブルを介しての外付けの機器に接続
すればバッテリー切れの心配から解消されます。 d) パワフルな低音スピーカーは素晴らしい音響環境と聞く耳
に喜びを提供します。
2 .梱包内容
Wireless ヘッドセット マイクロ USB 充電ケーブル
3.5mm 音声ケーブル ユーザーマニュアル
3 .ボタン機能
1)音量+ 2)音量- 3)電源オン-オフ/応答ボタン
4)LED表示板 5)前の曲 6)再生/一時停止
7)次の曲 8)マイクロ USB 充電インターフェース
9)3.5mm インターフェース
-1-
ブルートゥースヘッドセット 日本語
4 .ヘッドセットの充電
注意:初めて使用される前にヘッドセットは完全に充電してお
いてください。再生時間は音量とオーディオの内容によって異な
ります。
ヘッドセットを充電するためにアクセサリーとして提供されて
いる USB 充電ケーブルを使用して下さい。イヤーカップの右側
にあるマイクロ USB インターフェースに USB 充電ケーブルの
小さい方を差し込んでください。反対の大きい方の充電ケー
ブルは他の重電機器の USB インターフェースケーブルに差し
込んでください。バッテリーが充電されると、表示が赤くなりま
す。初めて充電される際には完全に充電されるのに3 6時間
かかります。その後は、充電時間は、2 3時間になります。バッ
テリーが充電されると、点灯が消えます。
注意:バッテリー充電中にもWireless機能をご利用いただけま
す。しかしながら、 M06 ヘッドセットの完全充電には多少時間
がかかります。音声ケーブルを使用してバッテリーを充電して
いる時には、ヘッドセットは自動的に消えます。これは充電時
間に影響はしません。バッテリーレベルが低くなると M06 ヘッ
ドセットが自動的に音声リマインダーを発してくれます。
1)音量+ 2)音量- 3)電源オン-オフ/応答ボタン
4)LED表示板 5)前の曲 6)再生/一時停止
7)次の曲 8)マイクロ USB 充電インターフェース
9)3.5mm インターフェース
5 .電源オン及びオフ a) 電源オン:「電源オン/オフ」ボタンを 2-4 秒くらい音声が聞か
れ LED 表示が青く毎秒点滅するまで押していてください。 b)電源オフ:「電源オン/オフ」ボタンを 3-5 秒くらい音声が聞かれ
LED 表示が赤く 1-2 毎点滅して消えるまで押していてください。
6 .Wireless との交信
交信前の手順
注意:ヘッドセットと更新させる前にあなたのデスクトップあ
るいはノートパソコン Wireless機能があるかどうかを確認して
下さい。 もし Wireless 機能がPCにインストールされていな
い場合には Wireless バージョン2.1以降の Wireless アダプタ
-2-
ーを購入する必要があります.
a. コンピュータとの交信
1) ヘッドセットがオフモードになっているかを確認して下さい。
2) PC のWireless機能を機器検索設定のために起動して下さい。
3) 画面に検索出力リストが表示されます。
4) ヘッドセットとPCの距離が1メートル以内であることを
確認して下さい。
5) ヘッドフォンの電源ボタンを長押しして電源が入るまで待
ち、電源が入ってもまだボタンを押したままにしてください。
LED インジケーターが青と赤に交互に点滅するまで電源を
押したままにします。これは、ヘッドフォンが「ペアリング モー
ド」それは、デバイスとのペアリングまで待つことを意味し。
6) 「 AUSDOM M06 」機器を検索過程で発見するまで待ち “
AUSDOM M06 ” を交信する出力一覧検索の中から選択して
下さい。
7)お使いのPCが[PINコード}を要求する場合には、
0000 ] 〔ゼロ4つ)を入力して下さい。交信過程が正常に行わ
れるヘッドセット青い光が点灯したままになりますLED。
8) 60 秒後に交信過程が修了できなかった場合には、 前述の
指示の1-7を繰り返して下さい。 b.携帯電話との交信
1) ヘッドセットがオフモードになっているかを確認して下さい。
2) ヘッドセットとPCの距離が1メートル以内であることを確
認して下さい。
3) ヘッドフォンの電源ボタンを長押しして電源が入るまで待
ち、電源が入ってもまだボタンを押したままにしてください。
LED インジケーターが青と赤に交互に点滅するまで電源を
押したままにします。これは、ヘッドフォンが「ペアリング モー
ド」それは、デバイスとのペアリングまで待つことを意味し。
4)機器検索を設定するには、携帯電話のWireless機能を起動
してください。
5) “ AUSDOM M06 ”を交信の為の検索出力機器一覧の中か
ら選択して下さい。交信過程が正常に行われるヘッドセット
青い光が点灯したままになりますLED。
6) 60 秒後に交信過程が修了できなかった場合には、 前述の
指示の 1-5 を繰り返して下さい。
交信前の手順
注意:ヘッドセットと更新させる前にあなたのデスクトップあ
るいはノートパソコン Wireless機能があるかどうかを確認して
下さい。 もし Wireless 機能がPCにインストールされていな
い場合には Wireless バージョン2.1以降の Wireless アダプタ
ブルートゥースヘッドセット 日本語
ーを購入する必要があります.
a. コンピュータとの交信
1) ヘッドセットがオフモードになっているかを確認して下さい。
2) PC のWireless機能を機器検索設定のために起動して下さい。
3) 画面に検索出力リストが表示されます。
4) ヘッドセットとPCの距離が1メートル以内であることを
確認して下さい。
5) ヘッドフォンの電源ボタンを長押しして電源が入るまで待
ち、電源が入ってもまだボタンを押したままにしてください。
LED インジケーターが青と赤に交互に点滅するまで電源を
押したままにします。これは、ヘッドフォンが「ペアリング モー
ド」それは、デバイスとのペアリングまで待つことを意味し。
6) 「 AUSDOM M06 」機器を検索過程で発見するまで待ち “
AUSDOM M06 ” を交信する出力一覧検索の中から選択して
下さい。
7)お使いのPCが[PINコード}を要求する場合には、
0000 ] 〔ゼロ4つ)を入力して下さい。交信過程が正常に行わ
れるヘッドセット青い光が点灯したままになりますLED。
8) 60 秒後に交信過程が修了できなかった場合には、 前述の
指示の1-7を繰り返して下さい。 b.携帯電話との交信
1) ヘッドセットがオフモードになっているかを確認して下さい。
2) ヘッドセットとPCの距離が1メートル以内であることを確
認して下さい。
3) ヘッドフォンの電源ボタンを長押しして電源が入るまで待
ち、電源が入ってもまだボタンを押したままにしてください。
LED インジケーターが青と赤に交互に点滅するまで電源を
押したままにします。これは、ヘッドフォンが「ペアリング モー
ド」それは、デバイスとのペアリングまで待つことを意味し。
4)機器検索を設定するには、携帯電話のWireless機能を起動
してください。
5) “ AUSDOM M06 ”を交信の為の検索出力機器一覧の中か
ら選択して下さい。交信過程が正常に行われるヘッドセット
青い光が点灯したままになりますLED。
-3-
6) 60 秒後に交信過程が修了できなかった場合には、 前述の
指示の 1-5 を繰り返して下さい。
交信前の手順
注意:ヘッドセットと更新させる前にあなたのデスクトップあ
るいはノートパソコン Wireless機能があるかどうかを確認して
下さい。 もし Wireless 機能がPCにインストールされていな
い場合には Wireless バージョン2.1以降の Wireless アダプタ
ーを購入する必要があります.
a. コンピュータとの交信
1) ヘッドセットがオフモードになっているかを確認して下さい。
2) PC のWireless機能を機器検索設定のために起動して下さい。
3) 画面に検索出力リストが表示されます。
4) ヘッドセットとPCの距離が1メートル以内であることを
確認して下さい。
5) ヘッドフォンの電源ボタンを長押しして電源が入るまで待
ち、電源が入ってもまだボタンを押したままにしてください。
LED インジケーターが青と赤に交互に点滅するまで電源を
押したままにします。これは、ヘッドフォンが「ペアリング モー
ド」それは、デバイスとのペアリングまで待つことを意味し。
6) 「 AUSDOM M06 」機器を検索過程で発見するまで待ち “
AUSDOM M06 ” を交信する出力一覧検索の中から選択して
下さい。
7)お使いのPCが[PINコード}を要求する場合には、
0000 ] 〔ゼロ4つ)を入力して下さい。交信過程が正常に行わ
れるヘッドセット青い光が点灯したままになりますLED。
8) 60 秒後に交信過程が修了できなかった場合には、 前述の
指示の1-7を繰り返して下さい。 b.携帯電話との交信
1) ヘッドセットがオフモードになっているかを確認して下さい。
2) ヘッドセットとPCの距離が1メートル以内であることを確
認して下さい。
3) ヘッドフォンの電源ボタンを長押しして電源が入るまで待
ち、電源が入ってもまだボタンを押したままにしてください。
LED インジケーターが青と赤に交互に点滅するまで電源を
押したままにします。これは、ヘッドフォンが「ペアリング モー
ド」それは、デバイスとのペアリングまで待つことを意味し。
4)機器検索を設定するには、携帯電話のWireless機能を起動
してください。
5) “ AUSDOM M06 ”を交信の為の検索出力機器一覧の中か
ら選択して下さい。交信過程が正常に行われるヘッドセット
青い光が点灯したままになりますLED。
ブルートゥースヘッドセット 日本語
6) 60 秒後に交信過程が修了できなかった場合には、 前述の
指示の 1-5 を繰り返して下さい。
7 .以前に交信した機器との接続
M06 は以前に交信したことのある機器とのみ接続可能です。
M06 ヘッドセットが交信モードに入る前に、
なります。
M06 ヘッドセットは
自動的に前回交信接続された機器と自動的に接続するように
注意:特定のPC及びノートブックコンピュータは手動で毎回
Wirelessを接続したときにアクティベートする必要がある場合が
あります。
ボタン操作
1)音量調整
機能
音量を上げる
音量を 下げる
操作
音量調整の+ボタンをタッ
プするか押す
音量調整の「-」ボタンをタ
ップするか押す
注意
最大あるいは最低音量に到
「ビ-プ」音が鳴る。
2)電話に応答する
機能
電話の着信
応答中
応答中に携帯電
話に切り替える
交信モード
応答
操作
拒否
会話を切断
電話を切る
“ 電源オン / オフ ” ボタンを2秒ほ
ど押し続けて下さい。
“ 電源オン / オフ ” ボタンをタッ
プしてください
“ 電源オン / オフ ” ボタンをタッ
プしてください
最後の発信電話
を再ダイヤルする
“ 電源オン / オフ ” ボタンをタッ
プしてください
-4-
注意
“ 電源オン / オフ ” ボタンをタッ
プしてください
ブルートゥースヘッドセット
3)音声メディアの再生
機能
音声メディアの
再生なし ¹
音声メディアの
再生 ²
操作 注意
次の曲への移行
「再生/一時停止」ボタン
を押す
[次の曲」のボタンを押す
その曲を再再生する/
前の曲に移行する
[前の曲」のボタンを押す
¹ 初めて曲を再生するためには、マルチメディア放送プログラムへの注意項目
が出されます。
² 幾つかのマルチメディア放送機器は再生機能をサポートし、いくつかのマル
チメディア放送機器は、前の曲の再生機能をサポートしています。
注意:音楽を聴いている間に、着信を応答したり、電話を発進
した場合には、音声メディアあるいは音楽の会話が修了した
後で再生されます。
4)LED表示の状態
バッテリー充電中
バッテリーが完全に充電
されると、
LED表示は赤く点灯します。
赤いLED表示が消えます。
スタンバイ(交信前)
スタンバイ(交信後)
応答中
LED表示が毎秒青く点滅します。
LED表示は青く点灯します。
二回青のLEDインジケータが点滅毎秒
電話の着信 LED 表示が毎秒青く点滅します。
バッテリーレベルが低い時 LED表示は赤く点灯します。
交信中
LED表示は赤と青が交互に点滅し
ます。
-5-
日本語
ブルートゥースヘッドセット 日本語
8.携帯電話あるいは M06 Wireless ヘッドセットの使用中
*電話の着信がある時は、ヘッドセットで着信音が鳴ります。
*「電源オン/オフ」ボタンをタグして、着信電話に応対します。携
帯電話の応答ボタンを押して着信電話に応答する場合には、
音楽は自動的に停止します。
*「電源オン/オフ」ボタンをタグしてもう一度電話を切るか、携
帯電話の切断ボタンを押して電話を切ります。
*会話が終了したら、音楽が自動的に再生しはじめます
9.ワイヤー付きヘッドセットの使用
3.5mmの音声ケーブルをイヤーカップの左側に挿入すると、
M06ヘッドセットは、Wireless機能がない音声機器、あるいは
交信がない物、ヘッドセットのバッテリーの電源がない、航空
旅行中、というような特定の状況下では、ワイヤー付きのヘッ
ドセットを使用することが可能です。
注意:ワイヤー付きのヘッドセットをご利用中は、マイクは作
動いたしません。
仕様
マイク仕様
マイクユニットΦ 6*5mm
方向性全方向性
1KHz において S.P.L:-58±2DB S.P.L
インピーダンス≤ 2.2KΩ
周波数応答: 100Hz-10,000Hz
操作電圧: 4.5
V
-6-
ブルートゥースヘッドセット
スピーカー仕様
スピーカー直径Φ 40mm
インピーダンス 32Ω
S.P.L:1KHzにおいて 90±3 dB S.P.L
推薦レート電源 20 mW
集計機能 50 mW
周波数応答: 20Hz-20,000Hz
Wireless 仕様
Wireless バージョン 4.0
Wireless 距離 10m
送信周波数 2.40GHz-2.48GHz
送信電源クラス2.0.025-2.5Mw
サポートプロフィール HSP/HFP/A2DP/AVRCP
バッテリー仕様
バッテリータイプ 400mah 再充電可能リチウム電池
充電ポートマイクロ USB
走行時間会話時間約 20 時間/音楽再生時間約 20 時間
スタンバイ時間 2000 時間以上
充電時間 2-3 時間
操作気温 10-45
保管温度 -25-60
注:特徴と仕様は予告なく変更されることがあります。
日本語
-7-
WARRANTY CARD
ATTENTIONS:
- Please read the return procedures and warranty policy carefully on www.ausdom.com/warranty before sending items back to point-of-purchase.
- Please fill the card and send it to your reseller together with the product if your product's warranty is valid.
S.N:
Date of Purchase:
Product Model:
RMA Number:
Return Reason:
Customer Name:
TEL:
E-mail:
Address:
For more information, please visit our official website www.ausdom.com
Your valuable comments and suggestions on improving
AUSDOM products are welcomed!
advertisement