Quick Start Guide
VLXT(.I) (.EF) (.JP) cameras (10 Gigabit Ethernet)
VLXN.I cameras (5 Gigabit Ethernet)
Download latest camera software: www.baumer.com/vision/software
Download latest technical documentation: www.baumer.com/cameras/docs
Conformity / Safety
Conformity
We declare, under our sole responsibility, that the previously described Baumer VLXT cameras conform with the directives of the CE.
Safety Precautions
Notice
See the User's Guide for the complete safety instructions!
Caution
Observe precautions for handling electrostatically sensitive devices!
Several of the described Baumer cameras conform with the directives of the Korean
Conformity.
Environmetal Requirements
Storage temp.
Humidity
-10 °C ... +70 °C
10 % ... 90 %
Non-condensing
C
UL
US LISTED
The camera has been tested by UL (Underwriters Laboratories) and complies with the requirements of the standards.
Please see the User’s Guide for further information.
Further Information
For further information on our products visit www.baumer.com
For technical issues, please contact our technical support: [email protected]
· Phone +49 (0)3528 4386-0 · Fax +49 (0)3528 4386-86
© Baumer Optronic GmbH · Badstrasse 30 · DE-01454 Radeberg, Germany
Technical data has been fully checked, but accuracy of printed matter not guaranteed.
Subject to change without notice. Printed in Germany 07/21. v6 11207581
Product Specification
VLXT cameras – Extremely functionality and high frame rates
▪ up to 12 megapixel and 216 fps
▪ Power supply: 12 – 24 V (-15 % / +20 %)
▪ GigE Vision TM standard compliant
▪ Optional: Protection classes IP67 (with installed tube)
▪
▪ Optional: Modular tube system
▪ M12 industry connectors
PWM on outputs for direct controlled illuminations
▪ 4 outputs with maximum 1.5 A (2.5 A with 40% periode time)
Notice
Further technical details are available in the respective data sheets.
Dimensions (TFL-mount)
88 8,33
10 x M3 x 5/7
4 x
3
M x
6/8
35 temperature measurement point
1/4"-20 UNC x 6/9
7,83
60 ±0,2
Pixel 0,0
12,9 99,7 ±0,4 6,8
TFL-Mount
28,5 15,7
Dimensions (EF-mount)
3,3 92,2 40,6
72,5
10 x M3 x 5/7 temperature measurement point 60 ±0,2
28,5 15,7
Pixel 0,0
Canon EF-S Mount
12,9 113,82
136,1
System Requirements
CPU
RAM
Operating system
(OS)
Recommended for
GigE
Intel ® Core ™ i5-2520M
CPU @ 2.50 GHz, Cores: 4
4 GB
Recommended for
Intel ®
10 GigE
Core ™ i7-3770
CPU @ 3.40 GHz, Cores: 8
8 GB
Microsoft ® Windows ® 7 (32 / 64 bit systems)
Microsoft ® Windows ® 8 (32 / 64 bit systems)
Microsoft ® Windows ® 10 (32 / 64 bit systems)
Dimensions (C-mount)
4 x
M
3 x
6/8
35
88 8,33
10 x M3 x 5/7 temperature measurement point
7,83
1/4"-20 UNC x 6/9
60 ±0,2
Dimensions (M58-mount) pixel 0,0 99,7
12,9 99,7 ±0,4 6,4
C-mount
28,5 15,7
92,2 8,33
10 x M3 x 5/7
M58 x 0,75 temperature measurement point
60 ±0,2
Pixel 0,0
28,5 15,7
12,9 103,82 ±0,4
Installation
Lens mount
Notice
Ensure the sensor and lens are not contaminated with dust and airborne particles when mounting the support or the lens to the device!
▪
▪
▪
The following points are very important:
▪ Install the camera in an environment that is as dust free as possible!
Keep the dust cover (bag) on the camera for as long as possible!
Hold the camera with the sensor downwards if the sensor is uncovered.
Avoid contact with any of the camera‘s optical surfaces!
Modular tube system (ordered separately)
The peak torque while tightening the screws is 0.9 Nm.
Use a torque wrench!
Camera
Distance Ring
Tube Adapter
Recommended grease for easier installation of the sealing rings: EL-
KALUB GLS 867
Tube
General Description
1 2 3 4
7 6
5
No. Description
1
Lens mount
(C- / M58- / TFL- / EF-mount)
2
3
4
Lens control (≥ Release 3 only or .EF)
4 x Tube Adapter /front mounting threads
(except M58-, EF-mount)
Power- and process interface
No. Description
5 Ethernet port
6
7
Camera LED
GigE LED
Data Interface / Digital IOs
Ethernet
(SACC-CI-M12FS-8CON-L180-10G)
7
8
6
5
1
2
4
3
1 MX1+
2 MX1-
3 MX2+
4 MX2-
5 MX4+
6 MX4-
7 MX3-
8 MX3+
Power supply / Digital IOs (on camera side)
(SACC-CI-M12MS-12CON-L180)
M12 / 12 pins / wire colors of the connecting cable (ordered separately)
1 Power V
CC brown
2 GND (Power) blue
3
6
IN1 (Line0) white
4 OUT1 (Line4) green
5 IN2 (Line1) pink
OUT2 (Line5) yellow
5
4
3 2
10
6
11 12
7
8
1
9
7 OUT3 (Line6) black
8 RS232 Txd (Line2) grey
9 OUT4 (Line7) red
10 RS232 RxD (Line3) violet
11 GND (IO) grey-pink
12 Power (IO) red-blue
LED Signaling
LED
1
2
GigE LED
Camera LED
1 2
Signal green static green flash yellow static yellow flash orange static
Heat Transmission
Caution
Heat can damage the camera. Ambient temperature above 25 °C (77 °F) requires heat dissipation measures. Provide adequate dissipation of heat, to ensure that the temperatures does not exceed the specified values.
Baumer recommends the following methods for proper heat dissipation:
▪ Every form of convection around the device and mounting helps reduce temperature. Prevent heat from becoming trapped!
▪ Mounting in combination with forced convection may provide proper heat dissipation.
▪ Avoid mounting onto stainless steel. Stainless steel has a roughly 10fold lower thermal conductivity compared to aluminium.
▪ Do not install the device at the end of a profile; this will allow heat to dissipate on both sides (higher temperature drops over a larger area)!
▪ Do not operate other devices in close proximity to the camera. Their waste heat could additionally heat the camera.
▪ From an ambient temperature of 30 °C (86 °C) up to +40 °C (104 °F) the camera requires forced air cooling (min. 0.9 m/s).
T
Meaning link active receiving error transmitting overheated
See User´s Guide for further information.
Power Supply
Power V
CC
Power Supply
24 V (± 20 %) / Power consumption: max. 15.5 W
For UL conform installation:
Class 2 per NEC / Protection Class III
The device is intended to be supplied from an isolated Limited
Energy Source per UL61010-1, 3rd ed cl. 9.4 or Limited Power
Source per UL60950-1 or Class 2 per NEC.
IP
Protection
Caution
In order to achieve the mentioned IP protection level, the M12 connectors need to be tightened with a torque value of 0.4 Nm.
For that Baumer suggests the use of a torque driver (such as Wiha TorqueVario ® -S ESD) in combination with a wrench for assembling sensor/ actuator cables with M12 connector (such as Phoenix Contact SAC BIT
M12-D15).
Installation
Installation of the camera:
▪ Connect the camera using an appropriate cable (at least Cat-5e) to the GigE board on your PC.
▪ If required, connect a trigger and / or flash to process interface.
▪ Connect the camera to power supply.
open wire
Installation sample
1 - Cable for trigger and flash
2 - GigE cable
3 - PCI board
