Adrenaline

User Manual Item no: 5150301

Need Help? Email: [email protected]

Phone: 01274 683 109 www.XRockerNation.co.uk

IMPORTANT: You must keep your original retail receipt as proof of purchase.

Welcome to X Rocker!

Thank you for purchasing this X Rocker gaming chair. You are now close to enhancing your favourite games with glorious audio!

To get started, please assemble the chair using the assembly instructions on the separate leaflet and then follow the instructions in this manual to get rocking!

Table of contents

2 Box contents and control panel overview

4 Wired Connection guide: TV (All consoles)

5 Connect by controller (PS4 systems only)

6 Bluetooth connection guide: (Mobile phones/tablet devices)

7 Troubleshooting tips

8 Health and safety information

9 Power supply safety information

2

B

+

9.84ft/3m

B1

3.28ft/1m

+ B2

0.492ft/0.15m

+ B3

0.492ft/0.15m

+ B5

+ B4

+ B6

B1 - 3m RCA to RCA Audio cable

B2 - 1m 3.5mm to 3.5mm Audio cable

B3 - RCA female to female adapters

B4 - 15cm RCA to 3.5mm audio cable

B5 – 15cm 3.5mm to 3.5mm audio cable

B6 – Power Supply Cable

Control panel overview

3

Wired connection guide: TV

(All consoles)

TV/Mobile/Tablet

B4

1. Connect B1 Cable to X Rocker control panel RCA INPUT sockets

2. Connect B3 RCA adapters to other end of B1 RCA cable

3. Connect B5 RCA cable to B3 Adapter.

4. Connect B5 3.5mm end into the headphone socket of your Television

5. Once connected to your TV, increase volume to 50% of the maximum for the best sound level.**

*N.B: If your TV does not feature a headphone socket then you may need to purchase an additional TOSlink adapter to get connected directly to a console for audio.

**Depending on your TV you may need to Increase the headphone volume separately in the TV sound settings.

4

Connect by controller:

(PS4 systems only)

B2

1. Connect the B2 cable to the bottom of the PS4 controller via the headset socket.

2. Connect the other end of the B2 cable to the chair via the green port.

3. With the PS4 turned on and in the main menu, press and hold the black PS button until the quick menu appears.

4. In this menu select [Adjust sound and devices]

5. Then select [output to headphones]

6. Change the setting from [Chat Only] to [All audio]

7. Make sure the volume in the previous menu is set to the maximum.

5

Bluetooth connection guide:

(Mobile phones/tablet devices)

Step 1:

Switch the X Rocker X-Pro’s wireless switch to the Bluetooth position.

Step 2:

On the Audio output device go into its Bluetooth settings, turn Bluetooth on if it is not on already and search for

XROCKER. Upon finding this, select the XROCKER option.

If a passcode is required the four digit code will be ‘0000’.

6

Troubleshooting tips

Issue

No power going to control panel

No sound

Bluetooth mode cuts out during gameplay/No vibration or subwoofer sound via analogue connection

The cables connected to my

X Rocker have been broken accidentally

Interference over wireless connection

Troubleshooting steps

• Make sure that the power cable is connected correctly.

• Make sure that the power supply at the power source is working correctly.

• With the chair turned to the ON position, give the power cable a slight wiggle in the port. If any lights flicker (or not) then please contact support (details below).

• Review the connection methods on the previous page and try alternative connection methods if possible.

• Confirm that the device/system is correctly configured as per previous connection guide.

• Make sure that the Bluetooth switcher is in the corresponding position that suits your connection method. (B for and AUX for wired connections).”

• Please make sure that the volume of the source device is at a higher level to strengthen the audio signal.

• Please contact X Rocker support

([email protected]) regarding this issue.

• In this case, try another of the three wireless bands to isolate the signal.

7

Health and safety information

• Avoid immersing or allowing the X Rocker to come into contact with liquids.

• Please consult X Rocker Support before unscrewing any of the electrical components on the chair.

• Please be mindful of any cabling laid out between the X Rocker and power source/audio device.

• Please be mindful of cabling attached when moving/swivelling the X Rocker.

• If the cables or electrical equipment are broken then this may present a choking risk, please contact Support for replacements and dispose of these parts safely.

• Do not stand on the X Rocker or exceed the 120kg weight limit via other means.

• Do not lean back on the chair to the point in which the pedestal would lift off the ground.

• X Rocker armrests are designed for support and comfort during gameplay, please do not use these as support for getting in/out of the chair.

• Playing audio for long periods at loud volumes may contribute to difficulties in hearing.

• Please be considerate to others when playing audio through the

X Rocker speakers at higher volumes.

8

Power supply safety information

9

Need Help? Email: [email protected]

Phone: 01274 683 109 www.XRockerNation.co.uk

IMPORTANT: You must keep your original retail receipt as proof of purchase.