advertisement
1x2 HDMI 2.0a Splitter with Built-in & User
Adjustable EDID Management
P/N: AV-GM05P3-S1
Safety and Notice
The AV-GM05P3-S1 1x2 HDMI 2.0a Splitter with Built-in & User Adjustable EDID Management has been tested for conformance to safety regulations and requirements, and has been certified for international use. However, like all electronic equipments, the AV-GM05P3-S1 should be used with care. Please read and follow the safety instructions to protect yourself from possible injury and to minimize the risk of damage to the unit.
● Follow all instructions and warnings marked on this unit.
● Do not attempt to service this unit yourself, except where explained in this manual.
● Provide proper ventilation and air circulation and do not use near water.
● Keep objects that might damage the device and assure that the placement of this unit is on a stable surface.
● Use only the power adapter and power cords and connection cables designed for this unit.
● Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before cleaning.
TABLE OF CONTENTS
INTRODUCTION
The AV-GM05P3-S1 1x2 HDMI 2.0a Splitter with Built-in & User Adjustable EDID Management provides the most cost effective and advanced HDMI splitter solution on the market, by which the high definition video and high quality audio can be transmitted to 2 different locations without losing quality. AV-GM05P3-S1 supports HDR and the true 4K2K video!
With built-in USB firmware update mechanism, the compatibility among countless HDMI sources and receivers can be further guaranteed. With the upmost HDR/4K2K@60 4:4:4 8bits and high definition audio support, AV-GM05P3-S1 is suitable for high quality HDMI broadcasting, digital signage and education applications!
FEATURES
● HDMI 2.0a compliant
● Supports 4K2K@60 4:4:4 8bits
● Supports HDR*, which is 4K2K@60 4:2:0 10bits**
● HDCP 2.2 and 1.4 compliant
● Wide frequency range: 25MHz~600MHz
● Video bandwidth: 18Gbps
● Supports default EDID and EDID learning from display
● Supports xvYCC, x.v.Color & Deep Color
● Mini-USB firmware update for expanding compatibility
● Supports Dolby Digital, DTS-HD and Dolby TrueHD audio
● Easy installation
* HDR = High Dynamic Range.
** The video bandwidth of 4K2K@60 4:2:0 10bits (HDR) is 384 MHz, and the 4K2K@60 4:4:4
8bits is 594MHz .
PACKAGE CONTENTS
● 1x AV-GM05P3-S1
● 1x DC 5V wall wart
● 1x User Manual
1
2
SPECIFICATIONS
Model Name
Technical
Role of usage
HDMI compliance
HDCP compliance
Video bandwidth
Weight
Model
Package
Fixedness
Power supply
Power consumption
Operation temperature
Storage temperature
AV-GM05P3-S1
1x2 Distribution Amplifier (Splitter)
HDMI 2.0a
HDCP 2.2 / 1.4
Single-link 600MHz [18Gbps]
Video support HDR 4K2K@60 (4:2:0 10bits) / 4K2K@60 (4:4:4 8bits)
Audio support
DTS-HD Master Audio, Dolby TrueHD Dolby Digital,
DTS, DVD-Audio, LPCM, SACD, MPCM
ESD protection
PCB stack-up
Firmware update
Input
Output
HDMI connector
Rotary control switch
Mechanical
Housing
Dimension s
[L x W x H]
Model
Package
Carton
Human body model — ±15kV [air-gap discharge] & ±8kV [contact discharge]
4-layer board [impedance control — differential 100Ω; single 50Ω]
Feasible via Mini-USB port
1x HDMI
2x HDMI
Type A [19-pin female]
EDID Mode selection
Metal enclosure
92 x 62 x 20mm [3.6" x 2.5" x 1"]
198 x 137x 74mm [7.8" x 5.39" x 2.91"]
420 x 400 x 300mm [16.53" x 15.75" x 11.81"]
190g [6.7 oz]
673g [1.5 lbs]
Wall-mounting case
5V 2A DC
10 Watts [max]
0~40°C [32~104°F]
-20~60°C [-4~140°F]
Relative humidity 20~90% RH [no condensation]
3
4
PANEL DESCRIPTIONS
1.
Mini-USB: For technical support only [firmware update]
2.
Push Button: For F/W update (please refer to “Notice” about the FW update)
3.
Power LED: Lights on when device is ready
4.
Signal LED: Input signal LED indicator
5.
Signal LED: Output 1-2 signal LED indicator
6.
EDID MODE:
0 - Ultra HD(4K2K@60) – 8/10/12bit 3D HDR video & 7.1ch audio
1 - Ultra HD(4K2K@60) – 8/10/12bit 3D HDR video & 2ch audio
2 - Ultra HD(4K2K@30)(4K2K@60 420) – 8bit 3D HDR video & 7.1ch audio
3 - Ultra HD(4K2K@30)(4K2K@60 420) – 8bit 3D HDR video & 2ch audio
4 - Full-HD(1080p@60) – 12bit 3D video & 7.1ch audio
5 - Full HD(1080p@60) – 8bit 2D video & 2ch audio
6 - Learning EDID from output 1
7 - Auto EDID analysis learning mode*
7.
HDMI OUT1-2: HDMI outputs to HDMI displays
8.
HDMI IN: Connect to a HDMI input source
9.
+5V DC: Connect to the +5V DC 2A power supply unit
*Automatic EDID learning will detect all the connected HDMI equipped monitors and analyze all the
analyze all the content of EDID. The EDID with minimal resolution support will be the reference EDID for incoming HDMI source players.
HARDWARE INSTALLATION
Broadcasts HDMI signal to 2 HDMI displays!
1.
Switch off all devices, including monitors.
2.
Connect to the displays.
3.
Connect an HDMI source (such as a Blu-ray Disc player) to the HDMI In.
4.
Plug in 5V DC power supply.
5.
Power on the HDMI monitors.
6.
Power on the HDMI source.
CONNECTION DIAGRAM
5
6
NOTICE
1.
If somehow user cannot get video output, please try to adjust EDID rotary switch to Mode 5 or 6 for trouble shooting. Under Mode 5, there will be video output. The only requirement is that the display has to support at least Full HD. If default Full-HD EDID still cannot work, user can switch to Mode 6 to learn the EDID from output 1 to customize the EDID information. (Please note that the display with lowest resolution must be connected to output 1)
Select to Mode 5 - Full-HD(1080p@60) – 8bit 2D video & 2ch audio
1) Power on the device
2) Set the rotary switch to “5”
Select to Mode 6 – Learning EDID from output 1
1) Power on the device
2) Set the rotary switch to “6”
3) It will automatically learn EDID from output 1
[NOTE] a.
If the user wants to re-learn EDID from output1, please set the rotary switch to other mode and then come back to “6” to trigger the Learning Mode.
2.
While connecting a new monitor to the splitter under mode 7 (under auto EDID analysis learning mode), experiencing a short period of time without displaying might be expected. The splitter will do Automatic EDID learning and generate the best EDID among all connected monitors
3.
Firmware update is proceeded through Mini-USB. User MUST remove power adaptor and keep pressing “FUNCTION BUTTON” until plug in the power supply and see the power LED lights.
After that, please connecting the Mini-USB cable between PC and device. Opening the firmware update software, [1] set the correct com port and baud rate (57600 is recommended), [2] click the “File” button to direct to the firmware HEX or BIN file and press “Program MCU” symbol to firmware update. Once update process is done, please power off the device.
WARRANTY
April, 2018
The SELLER warrants the AV-GM05P3-S1 1x2 HDMI 2.0a Splitter with Built-in & User Adjustable
EDID Management free from defects in the material and workmanship for 3 years from the date of purchase from the SELLER or an authorized dealer. Should this product fail to be in good working order within 3 years warranty period, The SELLER, at its option, repair or replace the unit, provided that the unit has not been subjected to accident, disaster, abuse or any unauthorized modifications including static discharge and power surge. This warranty is offered by the SELLER for its BUYER with direct transaction only. This warranty is void if the warranty seal on the metal housing is broken.
Unit that fails under conditions other than those covered will be repaired at the current price of parts and labor in effect at the time of repair. Such repairs are warranted for 90 days from the day of reshipment to the BUYER. If the unit is delivered by mail, customers agree to insure the unit or assume the risk of loss or damage in transit. Under no circumstances will a unit be accepted without a return authorization number.
The warranty is in lieu of all other warranties expressed or implied, including without limitations, any other implied warranty or fitness or merchantability for any particular purpose, all of which are expressly disclaimed.
Proof of sale may be required in order to claim warranty. Customers outside Taiwan are responsible for shipping charges to and from the SELLER. Cables and power adapters are limited to a 30 day warranty and must be free from any markings, scratches, and neatly coiled.
The content of this manual has been carefully checked and is believed to be accurate. However,
The SELLER assumes no responsibility for any inaccuracies that may be contained in this manual.
The SELLER will NOT be liable for direct, indirect, incidental, special, or consequential damages resulting from any defect or omission in this manual, even if advised of the possibility of such damages. Also, the technical information contained herein regarding the AV-GM05P3-S1 features and specifications is subject to change without further notice.
Support
For more info or tech support http://www.siig.com/support
7
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement