PHONIX FLAT
ON WALL
For an all-encompassing cinema sound in a conveniently sized package, the Phonix Flat, with its slim flat baffle design, provides an immersive home theatre experience as a side surround, rear surround or ceiling effect speaker.
Best for use in 5.1, 7.1 or Dolby® Atmos™ configurations, this dedicated home cinema speaker offers high power handling with low frequency extension down to 45Hz in a neat 132mm deep package.
The hefty 165mm bass driver has a 33mm voice coil wound on high powered aluminium former, with ventilated spider and aluminium flux stabilisation ring for low distortion. The paper cone and surround of the bass driver have been developed to provide the smoothest possible response and a dynamic and non-fatiguing vocal mid-band.
The high frequency drive unit is a specially-damped, high power,
26mm doped fabric dome tweeter. Combined with the crossover network which has been designed and built using close-tolerance, professional-grade components, the resulting sound is exceptionally smooth and well controlled.
Complete with a braced, critically-damped enclosure, finished with a neat black cloth grille and an optional low profile mounting bracket for wall or ceiling mounting, the Phonix Flat is a versatile new benchmark for surround loudspeaker reproduction.
For the ultimate cinema experience at home, play it through Krix.
FEATURES
• Immersive surround or ceiling effects
• Easy wall mounting
• Compact, slim design
Frequency Range
Power Handling
Sensitivity
Impedance
Configuration
Crossover point
Low Frequency Driver
High Frequency Driver
Enclosure Type
Input Terminals
Dimensions
Net Weight
Phonix Flat
45 Hz - 20 kHz (in room response)
50 - 150 Watts RMS recommended amplifier power
88 dB (2.83V / 1m)
8 OhmS
2-Way
1.8 kHz
Single 165mm (6½”) laminated polypropylene cones. 33mm (1¼”) voice coil wound on high powered aluminium former, with ventilated spider and aluminium flux stabilization ring for low distortion
26mm (1”) doped fabric dome with large roll surround. Ferro fluid cooled
Bass reflex, front vented
Gold plated binding posts
388mm high x 260mm wide x 132mm deep
6 kg
krix.com
ADELAIDE | 14 Chapman Road, Hackham, SA, 5163, Australia T +61 8 8384 3433 F +61 8 8384 3419 [email protected].
au Pg. 1 of 2
DETAILED DIMENSIONS
260
Top View
82.5
110
Rear View
92
132
62
259
388
Front View
132
Side View krix.com
ADELAIDE | 14 Chapman Road, Hackham, SA, 5163, Australia T +61 8 8384 3433 F +61 8 8384 3419
Phonix Flat Specifications Sheet REV2-003 [email protected]
Pg. 2 of 2
