datasheet
VS906-E1
E1 Transport over IP
The VS906-E1 is a modular, multichannel
E1 contribution codec for IP/Ethernet networks.
With the VS906-E1, users can deploy multiple data circuits in point-to-point local loop applications or over long-distance packetized networks. This flexible platform enables highly cost-efficient data transport and with companion video transport cards, provides a comprehensive media delivery platform for virtually any environment including—long distance, metro area and campus networks.
Applications
• Professional broadcast contribution
• Studio-to-studio media exchange
• Managed data services over IP
• Radio distribution networks
Key features
• Multichannel E1 data encapsulation and circuit emulation over IP
• Streaming Intelligent Packet Switching (SIPS) providing perfect video over IP protection switching using dual network feeds
• Encoder partner protection (EPP) for 1+1 hardware redundancy in combination with SIPS
• Dual Gigabit Ethernet networks interfaces using
SFP technology for up to 80km of reach. Gigabit
Ethernet or Fast Ethernet electrical network interface option
R1618
VS906-E1
High Density
Simultaneous linear encapsulation and deencapsulation of 8 x Bi-directional E1 data circuits over Gigabit Ethernet
Launch delay offset (LDO)
User defined delay to bridge short duration simultaneous loss to both network flows
SFP networking
Onboard SFP cage for the installation of electrical and optical Ethernet components supporting distances from 100m to 80km.
IP/Ethernet toolset
Supports VLAN tagging for segregation of traffic and
Quality of Service differentiation via PCP and TOS/
DSCP.
Remote upgrade
Supports remote firmware upgrades via the AEMS
(Ventura shelf element manager) for the latest in function upgrades and fault resolution.
NEBS Level 3
Certified to perform in Telecommunication installations providing reliable performance in harsh environments.
Front panel Rear connector
nevion.com
nevion.com
E1 inputs and outputs
Standard E1, (ITU-T G.703)
Number of ports
Connector type
Data rate
Encoding
Framing
8 x input, 8 x output
2 x 25pin DB-25 with breakout cable or panel options to 16 BNC (75 Ohm) or RJ48 (120 Ohm), 8
Tx and 8 Rx
2.048Mbps
HDB3
Unframed or framed
IP interfaces
Number of ports
Connector type
Interface type
Protocols
2 x Network interface ports; 1 x maintenance port
2 x SFP (optical or CU) network interfaces,
1 x RJ45 (front panel maintenance port)
Gigabit Ethernet (GbE) IEEE 802.3ab (Electrical) or IEEE 802.3z (optical)
Fast Ethernet (FE) IEEE 802.3u, Ethernet IEEE
802.3i
IP/UDP/RTP, ARP, IGMPv2/v3, Diffserv/TOS,
802.1p (PCP), 802.1Q (VLAN)
Processing
Data encapsulation E1 over RTP/UDP/IP
Forward error correction
(FEC)
Non-block aligned XOR FEC similar to
SMPTE-2022-1 with maximum 8 columns and
20 rows
Streaming Intelligent Dual stream protection switching buffers up to
Packet Switching
(SIPS)
1000 msecs of differential delay
(200 ms in auto mode)
Launch delay offset Delays secondary flow up to a maximum of
(LDO) 150 msecs
Front panel LED status indicators
AUD1 Input 1 Local In 1-Partner Output 1-A Output 1-B
AUD2 Input 2 Local In 2-Partner Output 2-A Output 2-B
AUD3 Input 3 Local In 3-Partner Output 3-A Output 3-B
AUD4 Input 4 Local In 4-Partner Output 4-A Output 4-B
AUD5 Input 5 Local In 5-Partner Output 5-A Output 5-B
AUD6 Input 6 Local In 6-Partner Output 6-A Output 6-B
AUD7 Input 7 Local In 7-Partner Output 7-A Output 7-B
AUD8 Input 8 Local In 8-Partner Output 8-A Output 8-B
NWA Network A Link
NWB Network B Link
AUX Auxiliary Link
ECG Card Status
FAIL Card Fail
DC Power
External alarms
Normally open relay contacts. Closed for major alarm signals.
Element management
The Ventura AEMS shelf element managers, FCS183-AEMS and
FCS101-AEMS, provide a comprehensive set of status, control and alarm variables through a Web interface. The AEMS is a powerful
Linux based embedded management system that also supports
SNMP and XML. It also acts as an agent for card upgrades, storing multiple images for each card in the VS103 or VS101 chassis. Users can apply these images to install upgrades from a remote location.
Physical and environmental
Resides in a single slot of a VS101 or VS103 Ventura series chassis
Power consumption 25W max
Operating temperature
0˚C to 40˚C chassis ambient
Storage temperature -40˚C to 85˚C ambient
Relative humidity
Compliance
5% to 85%
NEBS Level 3, UL, CSA, CE,
FCC (Part 15, Class A), C-Tick, RoHS
Ordering options
VS906-HW-E1-120+ Multi-channel E1 data transport over IP/GigE.
Basic hardware that can be licensed for up to 8 bidirectional E1 data circuits. Backplane with 120
Ohm interfaces (2x DB25), and 2 SFP cages. SFP’s not included.
VS906-HW-E1-75+ Multi-channel E1 data transport over IP/GigE.
Basic hardware that can be licensed for up to 8 bidirectional E1 data circuits. Backplane with 75 Ohm unbalanced interfaces (2x DB25), and 2 SFP cages.
SFP’s not included.
VS906-SW-CH1-BI
VS906-SW-CH2-BI
Software option for VS906-DA/E1 enabling 1 bidirectional channel (provides 1 transmit and 1 receive
Software option for VS906 enabling 2 bidirectional channels (provides 2 transmit and 2 receive).
VS906-SW-CH4-BI
VS906-SW-CH6-BI
VS906-SW-CH8-BI
VS906-SW-EAPTX
VS906-SW-EPP
VS906-SW-FEC
Software option for VS906 enabling 4 bidirectional channels (provides 4 transmit and 4 receive)
Software option for VS906 enabling 6 bidirectional channels (provides 6 transmit and 6 receive)
Software option for VS906 enabling 8 bidirectional channels (provides 8 transmit and 8 receive)
Software option for VS906-AA/DA enabling
Enhanced apt-X audio compression (ultra low latency fixed 4:1 high quality compression, 48kHz 24bit processing)
Software option for VS906 enabling Encoder
Partner Protection (EPP) for 1+1 sender redundancy.
Software option for VS906 enabling Forward Error
Correction for IP input/output.
VS906-SW-LDO
VS906-SW-SIPS
Software option for VS906 enabling Launch Delay
Offset (LDO) for adding latency to one of two redundant IP streams transmitted by a sender device.
Software option for VS906 enabling SIPS protection and RTP seamless switching according to SMPTE
2022-7. This license is required only on reciever devices.
VS906-DB25M-8BNCM Break out cable, DB25 male to 8 BNC male connectors
VS906-DB25M-BNC-PANEL Break out cable with patch panel termination,
2x DB25 male to BNC patch panel.
VS906-DB25M-RJ48-PANEL Break out cable with patch panel termination,
2x DB25 male to RJ48 patch panel.
CONTACT INFORMATION
The Americas
[email protected] +1 (805) 247-8560 / +1 (212) 380- 0550
Asia Pacific
[email protected] +65 6872 9361
Europe and Africa
[email protected] +47 33 48 99 99 / +47 22 88 97 50
Middle East
[email protected] +971 (0)4 3901018
UK
[email protected]
nevion.com
+44 118 9735831
Nevion reserves the right to make changes without notice to equipment specification or design. The information provided in this document is for guidance purposes only and shall not form part of any contract.
© 2016 Nevion. All rights reserved.
