- Computers & electronics
- TVs & monitors
- Flat panel desk mounts
- Steelcase
- CF Series Intro Single Monitor Arm
- Assembly Instructions
Steelcase CF Series Intro Single Monitor Arm Assembly Instructions
Add to My manuals11 Pages
Steelcase CF Series Intro Single Monitor Arm allows you to adjust the height, tilt, swivel, and rotation of your monitor for optimal viewing comfort and ergonomic positioning. Desk clamp configuration fits desks up to 1.5" thick, while the grommet (sold separately) fits desks up to 3". It supports monitors from 2.2 to 20 lbs and can extend up to 22" from the desk. The arm has a built-in cable management system to keep your cords organized and out of the way.
advertisement
®
32"w x 18"h
MAX
Si vous avez un problème, une question à poser ou une requête à faire, appelez votre concessionnaire local ou
Steelcase, ligne 1, au numéro
888.STEELCASE (888.783.3522) pour obtenir une action immédiate de personnes prêtes à vous aider.
(En-dehors des États-Unis, du Canada, du Mexique, de
Porto Rico et des Antilles américaines, composez le
1.616.247.2500)
Ou visitez notre site Web à l'adresse: www.steelcase.com
© 2021 Steelcase Inc.
Grand Rapids, MI 49501
États-Unis
Imprimé aux États-Unis
If you have a problem, question, or request, call your local dealer, or Steelcase Line 1 at
888.STEELCASE (888.783.3522) for immediate action by people who want to help you.
(Outside the U.S.A., Canada, Mexico, Puerto Rico, and the U.S. Virgin Islands, call: 1.616.247.2500)
Or visit our website: www.steelcase.com
© 2021 Steelcase Inc.
Grand Rapids, MI 49501
U.S.A.
Printed in U.S.A.
CFINTRO
Si tiene algún problema, pregunta o pedido, llame a su distribuidor local , o a la línea 1 de Steelcase al
888.STEELCASE (888.783.3522) para una respuesta inmediata de parte de quienes desean ayudarle.
(Fuera de los EE.UU., Canadá, México, Puerto Rico y las
Islas Vírgenes de los EE.UU., llame al 1.616.247.2500) o visite nuestro sitio web: www.steelcase.com
© 2021 Steelcase Inc.
Grand Rapids, MI 49501
U.S.A.
Impreso en los EE.UU.
Page 1 of 11
P/N 1428729001
Doc # 158036 Rev B
P516028 REV B
E
F
G
C
D
ITEM
A
B
DESCRIPTION / PART NO.
Top Down Mount
416092
Quick Connect VESA Plate
114808
M4 x 12mm Phillips Pan Head Screw
701153
3/32" Allen Wrench
700146
7/32" Allen Wrench
701127
4mm Allen Wrench
709877
5mm Allen Wrench
710838
Parts List
CF Series Intro Single Monitor Arm
1
1
1
QUANTITY
1
ITEM
H*
1 I*
4
DESCRIPTION / PART NO.
M8 x 95mm SCHS
716061
Spacer
701544
J* Lock Nut
710015
* Included with optional thru-desk kit only,
1439137001SR (sold separately)
QUANTITY
1
1
1
Page 2 of 11
Doc # 158036 Rev B
A
Desk thickness up to 1.5" (3.8 cm)
OR
DESK CLAMP CONFIGURATION
Desk thickness up to 1.5" (3.8 cm)
7/32"
Tighten to
60 in-lbs minimum
E i
2a
If the monitor arm or pole does not easily fit into the mount, remove the bushing from the mount and place it on the monitor arm or pole and press firmly back into the mount.
2b 2c
OR
Page 3 of 11
Doc # 158036 Rev B
3
7/32"
THRU-DESK CONFIGURATION
4
7/32"
Tighten to
60 in-lbs minimum
H
Desk thickness up to 1.5" (3.8 cm)
E
I
J
Page 4 of 11
Doc # 158036 Rev B
5
Page 5 of 11
Doc # 158036 Rev B
6
C
B
Page 6 of 11
Doc # 158036 Rev B
7
Page 7 of 11
Doc # 158036 Rev B
8
E
7/32"
Page 8 of 11
Doc # 158036 Rev B
9
3/32"
D
5 mm
G
D
3/32"
Tighten to
5 in-lbs minimum
Page 9 of 11
Doc # 158036 Rev B
10
4 mm
F
Page 10 of 11
Doc # 158036 Rev B
11
Page 11 of 11
Doc # 158036 Rev B
advertisement
Related manuals
advertisement