462 Leap ® Headrest Assembly Replacement
If you have a problem, question, or request, call your local dealer, or Steelcase Line 1 at
888.STEELCASE
(888.783.3522) for immediate action by people who want to help you.
(Outside the U.S.A., Canada, Mexico, Puerto Rico, and the U.S. Virgin Islands, call: 1.616.247.2500)
Or visit our website: www.steelcase.com
© 2008 Steelcase Inc.
Grand Rapids, MI 49501
U.S.A.
Printed in U.S.A.
Page 1 of 3
939546222 Rev B
1.
Slide a flat bladed screwdriver between the headrest cover assembly and the headrest outer shell as shown.
HEADREST COVER
ASSEMBLY
2.
Turn the screwdriver to the side on each side of the headrest cover assembly
(2a) and remove the headrest outer shell (2b).
HEADREST COVER
ASSEMBLY
1
HEADREST OUTER SHELL
2a
2b
HEADREST
OUTER SHELL
Page 2 of 3
939546222 Rev B
HEADREST
ROLLER BEARINGS
3b
3.
Remove seven (7) screws from the headrest shell lid (3a). At the same time, remove the two (2) headrest roller bearings
(these will probably fall out on their own) (3b).
Remove headrest cover assembly (3c).
NOTE: The headrest shell lid must be saved.
Installing the
New Headrest
4.
Reverse steps 3c &
3b.
5.
Install headrest shell lid, first by engaging tabs into the slots on the back of the headrest cover assembly (5a), swing shell lid downward (5b) and then attach using seven
(7) screws.
6.
Reverse step 2b.
7.
Slide the flat bladed screwdriver between the headrest cover assembly and the headrest outer shell to tuck in the fabric.
HEADREST
SHELL LID
5a
SCREW
3a
HEADREST
COVER
ASSEMBLY
3c
5b
Page 3 of 3
939546222 Rev B
