Steelcase Buoy Cushion Assembly Instructions

®

1.

Remove liner from all pieces of tape on bottom of cushion.

Buoy ® Cushion

2.

Position cushion on top of Buoy Stool.

Ensure the cushion is fully inserted into the groove around the outside.

3.

Apply pressure pn top of cushion all the way around the outside to adhere tape to top of the Buoy Stool.

© 2013 Steelcase Inc.

Grand Rapids, MI 49501 U.S.A.

Printed in U.S.A.

IMPORTANT NOTES:

1. DO NOT apply below 50 F.

2. DO NOT remove the cushion after applying. This will

eliminate the effectiveness of the tape.

Page 1 of 1

P/N 939505505 Rev B