- No category
advertisement
OPERATORS MANUAL
SPEED OF LIGHT
PLEASE NOTE:
Read this manual BEFORE operating the machine.
Keep this manual for your reference.
Go to www.LAIgames.com
click on Support to register your games and receive of future updates.
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
© LAI Games
PARTS ............................................................................... 27
POSITION ..................................................................................... 28
ADJUSTMENT ................................................................................... 31
GUIDE ............................................................................... 32
GUIDE .......................................................................... 32
WIRING ......................................................................... 33
BAFB152 LAMP DRIVER PCB CONNECTOR
WIRING ....................................................... 34
DIAGRAM .................................................................... 36
2 .................................................................................. 37
3 .................................................................................. 38
WIRING ............................................................................... 39
2 ............................................................................ 40
3 ............................................................................ 41
WIRING .............................................................................. 42
WIRING .................................................................................. 43
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
SAFETY PRECAUTIONS
The following safety precautions and advisories are used throughout this manual and are defined as follows.
* WARNING! *
Disregarding this text could result in serious injury.
* CAUTION! *
Disregarding this text could result in damage to the machine.
* NOTE! *
Is an advisory text to hint or help understand .
MACHINE INSTALLATION and INSPECTION
When installing and inspecting Speed of Light, pay attention to the following points to ensure that players can enjoy the game safely.
Always turn Off mains power before removing safety covers to work on the machine, and refit all safety covers when work is completed.
When unplugging the game from an electrical outlet, grasp the plug, not the line cord.
Always connect to a grounded electrical outlet with a securely connected ground line.
Do not install the game cabinet outdoors or in areas of high humidity, direct water contact, dust, high heat or extreme cold.
Always use a digital multimeter, logic tester or oscilloscope for testing integrated circuit (IC) logic PC boards. The use of a continuity tester is not permitted.
Do not connect or disconnect any of the integrated circuit (IC) logic PC boards while the power is ON.
Do not use any fuse that does not meet the specified rating.
Before switching the machine on be sure to check that it has been set on the correct voltage for your area.
Check that the feet levelers are set correctly on the floor so that the game cabinet is level and stable.
Always make complete connections for the integrated circuit (IC) logic PC Boards and other connectors. Insufficient insertion can damage the electrical components.
Only qualified personnel should inspect or test the integrated circuit (IC) logic PC
Boards.
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
INTRODUCTION
Congratulations on your purchase of Speed of Light, the competitive, speed and reflex game by LAI Games. We hope you take the time to read this manual and learn about the many other features and user-friendly adjustments that can be made to fine-tune the game for maximum earning potential.
DESCRIPTION
The player has to press randomly illuminated lights on the button matrix. Six lights are illuminated at once. Each time one is pressed, it goes out and another is illuminated.
Gameplay is fast and frantic, with the aim to get as high a score as possible within a designated time.
PACKAGING
At delivery, the machine should arrive in good condition. To move the packaged machine for transport or placement, use a forklift and take care not to hit the package or stack heavy objects on top, as this may cause damage to the machine.
CONTENTS
The Speed of Light cabinet
Keys
2 x coin door keys
2 x back door keys
2 x ticket door key
Operator’s manual
IEC Power Cord (In cash box)
Parts & Accessories
(In cash box)
Bonus and Gameplay signage
SPECIFICATIONS
DIMENSIONS
Weight: 250 kg
Width: 187cm
Depth: 164cm
Height: 237cm
Power: Maximum
( 551 lb)
(74”)
(65”)
(93”)
1.2 - 1.3 A (220AC) 2.4 - 2.6 A (110AC)
ELECTRIC SUPPLY
The game has the option to operate on a 100V, 110V, 120V, 220V or 240V AC 50/60Hz single phase mains electric supply. The supply must be a three wire grounded supply.
* CAUTION! *
Before switching the machine on be sure to check that it has been set on the correct voltage for your area.
normally shipped on 220V AC unless otherwise specified.
UNPACKING
To unpack Speed of Light, first remove the exterior carton.
The header and platform are both located securely inside the Rear Bar mounting.
Remove the 9 bolts from the Rear Bars
(4 at each bar top, one at the base), then remove the Rear Bars.
Carefully take out the platform and the header. Now re-bolt the Rear Bars to the main cabinet.
Additional bolts are required at the base of the Rear Bars, but this is done later in the assembly.
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
ASSEMBLY
THE HEADER
Open and remove the back panel on the middle section of the header so you have access to the header cables. These cables are to be connected to the cable coming up through the center two tubes in the button matrix. Position the header on top brackets and secure with the 10 bolts supplied. Leave the bolts loose until all are fitted, then tighten them. Connect the left and right speakers, score display, and LED connectors from inside of the header, then replace the back panel on the Header and tighten all the bolts.
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
THE PLATFORM
1
2
The cabinet will arrive with the platform separate from the cabinet. Position the platform as per drawing 1.
Adjust the feet on the platform to allow the bars to slide into the front of the cabinet as pictured. Slide the platform close to the cabinet and plug together the wiring connectors
(Platform Wiring) then slide the platform fully into place. Once the platform and the cabinet are together, secure the platform from the back of cabinet first. Use the two bolts at the very back to pull the platform into the correct position before installing the remaining bolts that secure the platform and cabinet. Then add the side brace plates, and tighten everything up to finish the assembly.
3
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
WING SIGNS
To attach the wing signs, first bolt each wing to the external side, and top corner brackets as illustrated. Next, bolt the top of the wing to the back of the bonus header bracket, using the spacer provided.
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
GAMEPLAY
OBJECTIVE
Players hit as many illuminated buttons as they can within the designated time limit. Bonus points are awarded for hitting the lit buttons continuously at a high speed. At the end of normal game time, there is a three-second bonus round in which all the buttons are illuminated at once, and the player hits as many as they can.
HOW TO PLAY
Pay to play.
Select your game mode (1 player, 2 player, link mode)
Hit the lit buttons as fast as you can within the time limit
Hit as many buttons as you can in the three-second bonus round
Win tickets based on: o
Score (points per ticket) o
Beating the high score o
Reaching the top score of 999
Or win bonus credits based on: o
Beating the high score o
Reaching the top score of 999
TWO PLAYER
Players stand shoulder to shoulder and play on half of the playfield each
The winner is the player with the highest score at the end of the game
The machine pays out the sum of both players ticket winnings at once
Winner takes all, or they can divide the tickets as they see fit
If card swipe system is installed, there is an option that allows the sum of both players tickets go to the winners card (Note: two card swipers are needed)
High score/999 bonuses can also be won in two player
CHEATING
The software is programmed to identify when two or more people are playing a one player game. Once identified, the following occurs:
The speed bonus per button press (usually 1-5 points) is disabled, and the players receive 1 point per button press.
Their score, if high, is not displayed as the day’s high score
They do not receive any bonuses for beating the high score or reaching a score of
999
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
OPERATION
The “Speed of Light” game has five operational modes: Attract mode, Play mode, Test mode,
Programmable Adjustments Mode and Audits Mode.
OPERATIONAL DIAGRAM
ATTRACT MODE
PRESS TEST
VIEW ERRORS - Press again to clear
PRESS TEST
PLAY MODE
SOUND, LAMPS & DISPLAY TEST
Software Version Number
PRESS TEST
0 0 0
The display counts, all lamps are flashing and sound is played
1 1 1
PRESS TEST
No INPUT is active
SWITCH INPUT Test
C 0 0
TICKET notch SERVICE switch
To
is active
C 0 1
is active
C 0 2 C 0 6 C 4
0
0
0
PRESS TEST
RUN Test r r r
R
PRESS
SERVICE r 1
TICKET RUN TEST
PRESS
SERVICE
Press Service button to activate and dispense a ticket
Ticket dispenser test function
Dispensing Ticket
PRESS TEST
PROGRAMMABLE ADJUSTMENTS MODE
PRESS TEST
AUDITS MODE
PRESS TEST
GAME HISTORY MODE
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
ATTRACT MODE
The Attract mode provides a light and sound display while the game is not being played. This feature is to attract potential customers to play the game. The attract mode sound can be turned on and off
PLAY MODE
Speed of Light has two play modes. The standard Coin Play mode, where a coin, or coins are inserted. Or Free Play mode where no coins are necessary.
COIN PLAY
The Coin Play mode is entered from Attract mode, by inserting coins in any of the two coin slots on the front of the machine cabinet, then following the instructions in the “How to
Play” section of this manual.
FREE PLAY
Free play can be set in one of three ways:
From attract mode by holding the green service button for longer than five seconds
(this is reset to normal play when the machine is turned off and back on)
Or by setting the P-01 setting to FrEE (this is fixed, and stays set to free until this setting is changed)
For a single free game, just press the green service button once. When issuing single free games in this manner, prizes can be won as normal.
ERRORS
Button, ticket and machine errors can be alerted in multiple ways. A voiceover during the attract mode, a silent red light flashing on the front of the machine, or both. The silent red button is the default setting. To identify the error in this mode, press the red test button once. To clear the error, press the red test button once more. The game will check if the error is fixed. If the reason for the error is gone, the game will continue as normal. If the error has not been fixed, error will remain on the display.
SOLUTION CODE ERROR DESCRIPTION
Err1
TICKET ERROR - Jammed tickets, no tickets, or no ticket notch pulse for longer than 3 seconds
Err2
Err3
Err4
GAME MODE BUTTON JAM - active for longer than 30 seconds
EEPROM ERROR - Problem with onboard EEPROM
PLAYFIELD BUTTON ERROR - active for longer than 30 seconds
Clear ticket dispenser jam or replenish tickets.
Check button function using switch test
The main MCU is getting errors reading the
EEPROM (24C16 IC on MCU).
Check button function using switch test and clear the jam button or faulty switch
Err1 - TICKET ERROR
This error usually occurs if the game has run out of tickets or there is a ticket jam. If the game was out of tickets, replace them, and the error will automatically clear as well as feed any outstanding payout. Less common reason is if the game PCB tries to dispense tickets but does not get a notch pulse for approximately three seconds. Use the switch test function to
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
detect a notch pulse by passing a ticket in and out of the notch sensor. An active notch will be display as C1.
Err2 - START/STOP BUTTON JAMMED
This error is usually displayed if the Start/Stop button is active for longer than 30 seconds.
Use the switch test function to clarify. An active button will be display as C3.
Err3 - EEPROM ERROR
This Error is only displayed in test mode, and means that the CPU cannot read the EEPROM, or is receiving errors during communication with the EEPROM (The 23C16 IC on the main
MCU PCB). This could cause problems with the game audits and program settings.
If this occurs, firstly try switching the machine OFF and ON for at least 2 cycles. If the message still appears, replace the EEPROM IC Atmel 24C16 on the CPU PCB with a new
EEPROM. If the error message remains, send your main MCU PCB to the nearest authorized
LAI Games dealer for repair.
Err4 – PLAYFIELD BUTTON ERROR
This error is usually displayed if one or more buttons are jammed, or a button switch is faulty. Test the button function by using both the Run Test and Switch Test. Switch Test should display numbers between C11 – C40.
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
TEST MODE
The Speed of Light test mode allows you to run sound/lamp/display, switch, and run tests.
Cycle through these test modes with the red test button.
* NOTE! *
Entering Test Mode will clear any credits remaining in the game.
GAME SWITCHES
All game switches have a code from C1 to C40 as tabled below. By activating any of the
If there are no switches active, C - 00 be displayed.
If several switches are activated simultaneously, the display will consecutively show their codes, indicating which switches are active.
CODE
C0
DISPLAY SWITCH FUNCTION
C - 0 0
No Switch Active
C1
C - 0 1
Ticket Notch 1 Active
C2
C - 0 2
Service Switch Active
C3
C - 0 3
Player 1 Start Button Active
C4
C - 0 4
Coin 1 Switch Active
C5
C - 0 5
Coin 2 Switch Active
C6
C - 0 6
Ticket Notch 2 Active
C7
C - 0 7
Not Used
C8
C - 0 8
Not Used
C9
C - 0 9
Not Used
C10
C11 – C40
C - 1 0
2 Player Start /ink Button Active
Playfield Button (See Diagram)
PLAYFIELD DIAGRAM (C--)
SWITCH LOCATION
-
Ticket Door (if fitted)
Service Panel
Control Panel
Coin Door
Coin Door
Only Used For Card System Mode
Control Panel
Playfield
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
PROGRAMMABLE ADJUSTMENTS (P-Settings) REFERENCE
TABLE V1.5.0
No
Description
Range
P01
Coin 1: number of coins FrEE..20
P02
Coin 1: number of credits 1..20
P03
Coin 1: Activate multiple bonus pricing On/Off
P3-1
Coin 1: Number of coins bonus pricing level 1 Off,1…99
P3-2
Coin 1: Number of bonus credits at pricing level 1 Off,1…99
P3-3
Coin 1: Number of Coins for Bonus Pricing Level 2 Off,1…99
P3-4
Coin 1: Number of Bonus Credits at Bonus Pricing Level 2 Off,1…99
P3-5
Coin 1: Number of Coins for Bonus Pricing Level 3 Off,1…99
P3-6
Coin 1: Number of Bonus Credits at Bonus Pricing Level 3 Off,1…99
P04
Coin 2: number of coins 1..20
P05
Coin 2: number of credits 1..20
P06
Coin 2: Activate Multiple bonus pricing, On/Off
P6-1
Coin 2: Number of Coins for Bonus Pricing Level 1 Off,1…99
P6-2
Coin 2: Number of Bonus Credits at Bonus Pricing Level 1 Off,1…99
P6-3
Coin 2: Number of Coins for Bonus Pricing Level 2 Off,1…99
P6-4
Coin 2: Number of Bonus Credits at Bonus Pricing Level 2 Off,1…99
P6-5
Coin 2: Number of Coins for Bonus Pricing Level 3 Off,1…99
P6-6
Coin 2: Number of Bonus Credits at Bonus Pricing Level 3 Off,1…99
P07
P08
P09
P10
Attract Mode sound
Beat the High Score: bonus type
Beat the High Score: Number of bonus credits or tickets
1 – 10 credits (P08 setting on Credits)
1 – 100 tickets (P08 setting on Tickets)
Reach a 999 Score: Bonus type
On/Off
0 – None
1 – Credit
2 – Tickets
Credits
1, 2, 3...10
Tickets
1, 2, 3..100
0 – None
1 – Credit
2 – Tickets
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
Default
1
1
Off
Off
Off
Off
Off
Off
Off
1
1
Off
Off
Off
Off
Off
Off
Off
On(1)
2
20 tickets or
1 credit
2
P11
Reaching a 999 score: Number of bonus credits or tickets for reaching a score of 999
1 – 10 credits (P10 setting on Credits)
1 – 100 tickets (P10 setting on Tickets)
Credits
1, 2, 3...10
Tickets
1, 2, 3..100
1 … 100
P12
P13
P14
Ticket Payout: Number of points per ticket
Ticket Payout: Minimum ticket payout
Ticket Payout: Maximum ticket payout
0..30
No,
(P13) … 100
On/Off
P15
P16
Ticket Payout: Pay tickets on free mode
Default high score 50-700
P17
Current high Score (P16)…990
P18
Retain the High Score when game is turned off/on On/Off
P19
P20
P21
Ticket payout
Game linking type (optional)
Error message option
On/Off
0- None
1- Master
2- Slave
1..4
P22
Combine coin1 and coin2 On, Off
P23
2 Player Game - one credit On, Off
P24
Card system Mode (2 Swipers and 2 Ticket outputs) On, Off
P25
Competition mode Off, 1…4
Note: Default P-Setting give 15-20 ticket payout average (50c play , 1c ticket)
0
4
On
Off
Off
Off
50 tickets or
2 credits
20
8
No (No Max)
Off
500
500
On(1)
On
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
PROGRAMMABLE ADJUSTMENTS DETAILED
P01 – Coin 1 – Number of coins per credit (Default 01, adjustable FrEE – 20)
This sets the number of coins that need to be inserted into coin mechanism one, for each credit. It can be set between 1 to 20 coins for one credit. The default setting is 1. Setting
P01 to “FrEE” enables free play mode. This stays active when the machine is switched on and off.
P02 – Coin 1 – Number of game plays per credit (Default 01, adjustable 1 – 20)
This sets the number of games for each credit inserted into coin mechanism 1. This can be set from 1 to 20 plays for each credit. The default setting is 1.
P03 – Coin 1 -Activate multiple bonus pricing (Default OFF adjustable ON – OFF)
This turns on the multiple bonus credit system and activates the settings for up to 3 bonus levels on coin mechanism 1. It can be set to ON or OFF. The default setting is “OFF”. This means that multiple bonuses is disabled. If set to “ON”, the multiple bonus setting will be active, and open the sub-menu P03-1 to P03-6.
Note: Settings P03 and P03-1 to P03-6 are only used for the setting of bonus credit levels.
For example if a setting like this is required: o
$0.50 = 1 play o
$1.00 = 3 plays o
$2.00 = 7 plays o
$5.00 = 20 plays
P03-1 – Coin 1- Number of coins needed to reach bonus credit level 1 (Default OFF,
adjustable OFF-99)
This sets the number of coins (or bills) that need to be inserted into coin mechanism 1 to reach the bonus credit level 1. It can be set to either OFF for no bonus, or 1 to 99 coins.
P03-2 – Coin 1- Number of bonus credits given at bonus level 1 (Default OFF adjustable
OFF-99)
This sets the number of bonus credits that are given when credit Level 1 is reached. This is the number of bonus credits given, on top of what has been paid for. It can be set either to
OFF, or from 1 to 99 bonus credits. The default setting is “OFF”. This means that P03-3 will not open.
P03-3 – Coin 1- Number of coins needed to reach bonus credit level 2 (Default OFF,
adjustable OFF-99)
This sets the number of coins (or bills) that need to be inserted into coin mechanism 1 to reach the bonus credit level 2. It can be set to either OFF for no bonus, or 1 to 99 coins.
P03-4 – Coin 1- Number of bonus credits given at bonus level 2 (Default OFF adjustable
OFF-99)
This sets the number of bonus credits that are given when credit level 2 is reached. This is the number of bonus credits given, on top of what has been paid for. It can be set either to
OFF, or from 1 to 99 bonus credits. The default setting is “OFF”. This means
P03-5 – Coin 1- Number of coins needed to reach bonus credit level 3 (Default OFF,
adjustable OFF-99)
This sets the number of coins (or bills) that need to be inserted into coin mechanism 1 to reach the bonus credit level 3. It can be set to either OFF for no bonus, or 1 to 99 coins.
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
P03-6 – Coin 1- Number of bonus credits given at bonus level 3 (Default OFF adjustable
OFF-99)
This sets the number of bonus credits that are given when credit level 3 is reached. This is the number of bonus credits given, on top of what has been paid for. It can be set either to
OFF, or from 1 to 99 bonus credits. The default setting is “OFF”.
BONUS CREDIT EXAMPLES
Examples (Base price $0.25c) (Base Price $0.50c (Base Price $0.50c) (Base Price $1.00)
P Setting
Adjustment
1 play $ 0.25c
3 plays $ 0.50c
1 play $ 0.50c
3 plays $ 1.00
1 play $ 0.50c
3 plays $ 1.00
1 play $ 1.00
3 plays $ 2.00
P01 / P04
P02 / P05
P03 / P06
P3-1 / P6-1
P3-2 / P6-2
7 plays $ 1.00 7 plays $ 2.00 8 plays $ 2.00 8 plays $ 5.00
($0.25c coins or DBA set on $0.25c pulses)
($0.25c coins or DBA set on $0.25c pulses)
22 plays $ 5.00 18 plays $ 10.00
($0.25c coins or DBA set on $0.25c pulses)
($0.25c coins or DBA set on $0.25c pulses)
1 2
1
2
1
4
1 1
ON
2
1
ON
4
1
ON
4
1
ON
8
1
P3-3 / P6-3
P3-4 / P6-4
P3-5 / P6-5
P3-6 / P6-6
4
3
OFF
OFF
8
3
OFF
OFF
20
12
8
4
20
3
40
8
P04 – Coin 2 – Number of coins per credit (Default 01, adjustable 1 – 20)
This sets the number of coins that need to be inserted into coin mechanism 2, for each credit. It can be set between 1 to 20 coins for one credit. The default setting is 1.
P05 – Coin 2 – Number of game plays per credit (Default 01, adjustable 1 – 20)
This sets the number of games for each credit inserted into coin mechanism 2. This can be set from 1 to 20 plays for each credit. The default setting is 1.
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
P06 – Coin 2 – Activate coin 2 multiple bonus pricing (Default OFF adjustable ON – OFF)
This turns on the multiple bonus credit system and activates the settings for up to 3 bonus levels on coin mechanism 2. It can be set to ON or OFF. The default setting is
“OFF”. This means that multiple bonuses is disabled. If set to “ON”, the multiple bonus setting will be active, and open the sub-menu P06-1 to P06-6.
Note: Settings P06-1 to P06-6 set the bonus credit levels. For example: o
$0.50 = 1 play o
$1.00 = 3 plays o
$2.00 = 7 plays o
$5.00 = 20 plays
P06-1 – Coin 2 – Number of coins needed to reach bonus credit level 1 (Default OFF,
adjustable OFF-99)
This sets the number of coins (or bills) that need to be inserted into coin mechanism 2 to reach the bonus credit level 1. It can be set to either OFF for no bonus, or 1 to 99 coins.
P06-2 – Coin 2 – Number of bonus credits given at bonus level 1 (Default OFF adjustable
OFF-99)
This sets the number of bonus credits that are given when credit Level 1 is reached. This is the number of bonus credits given, on top of what has been paid for. It can be set either to OFF, or from 1 to 99 bonus credits. The default setting is “OFF”. This means that P06-3 will not open.
P06-3 – Coin 2 – Number of coins needed to reach bonus credit level 2 (Default OFF,
adjustable OFF-99)
This sets the number of coins (or bills) that need to be inserted into coin mechanism 2 to reach the bonus credit level 2. It can be set to either OFF for no bonus, or 1 to 99 coins.
P06-4 – Coin 2 – Number of bonus credits given at bonus level 2 (Default OFF adjustable
OFF-99)
This sets the number of bonus credits that are given when credit level 2 is reached. This is the number of bonus credits given, on top of what has been paid for. It can be set either to OFF, or from 1 to 99 bonus credits. The default setting is “OFF”. This means
P06-5 – Coin 2 – Number of coins needed to reach bonus credit level 3 (Default OFF,
adjustable OFF-99)
This sets the number of coins (or bills) that need to be inserted into coin mechanism 2 to reach the bonus credit level 3. It can be set to either OFF for no bonus, or 1 to 99 coins.
P06-6 – Coin 2 – Number of bonus credits given at bonus level 3 (Default OFF adjustable
OFF-99)
This sets the number of bonus credits that are given when credit level 3 is reached. This is the number of bonus credits given, on top of what has been paid for. It can be set either to OFF, or from 1 to 99 bonus credits. The default setting is “OFF”. This means
P07 – Attract Mode Sound (Default ON)
This adjustment turns the attract mode sound ON or OFF. This is the sound and music that the game generates to attract customers when not being played. The music will loop approximately every 3 minutes.
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
P08 – Beat high score bonus type (Default tickets)
This is the type of bonus awarded to the player for beating the high score. It can be set to none, credits, or tickets.
P09- Number of bonus credits or tickets for beating the high score (Default, 20 tickets)
This is the number of tickets or credits awarded to the player for beating the high score and is adjustable 1-100 is P08 is set for Tickets or 1-10 if P08 is set for Credits
P10- Reach score of 999, bonus type (Default, tickets)
This is the type of bonus awarded to the player for reaching 999.It can be set to none, credits, or tickets.
P11- Number of bonus credits or tickets for reaching a score of 999 (Default, 20 tickets)
This is the number of tickets or credits awarded to the player for reaching a score of 999 and is adjustable 1-100 is P10 is set for Tickets or 1-10 if P10 is set for Credits.
P12- Number of points per ticket (Default, 20)
This is the number of points the player must score to accumulate each ticket and it is adjustable 1-100.
P13- Minimum ticket payout (Default, 8)
This is the minimum number of tickets that will be paid out, no-matter the score the player reaches. It is adjustable from 0 to 30
P14- Maximum ticket payout (Default, no max)
This is the maximum number of tickets that will be paid out to the player. It is adjustable from no (No Maximum) to 100 tickets
P15- Pay out tickets on free mode (Default Off)
This is whether tickets are paid out when the machine is set to free mode and can be set to on or off
P16- Default high score (Default, 500)
This is the high score the machine starts with, and resets to if P18 is set to off, it is adjustable from 50 to 700.
P17- Current high Score (Default, 500)
This setting is used to manipulate the current high score and the score can be change up or down and is adjustable down to the P16 setting and up to 990.
P18- Memorise the High Score (Default, on)
This sets whether or not the machine remembers the last high score when switched off.
P19-Ticket payout (Default, on)
This sets ticket payouts on or off
P20- Game linking type (Default, 0 none) (optional)
This sets the machine to either master or slave when linked with another Speed of Light machine. It can be either 0 (no linking), 1(Master or 2 (Slave)
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
P21- Error message option (Default, 4)
This sets the manner in which errors are alerted. The default silently flashes the red light on the front of the machine. It is adjustable from 1-4 as per the table below.
Setting Voice Over 4 Digit Display Red Lamp
1
Played Displayed Flash
2
3
4
Played
Will display when test button pressed.
Not Played Displayed
Not Played
Will display when test button pressed.
Flash
Flash
Flash
P22- Common coin (Default, off)
This controls the dual coin system. When set to OFF, both coin systems are separate
(double coin system), when set to ON, both coin inputs will be combined and into a single accumulated pool. Note the value of both inputs needs to be the same. Example:
This is often used with a DBA set on 25c pulses and 25c coin mech.
P23- Double player - one credit (Default, off)
This allows the two-player mode to be played with just one credit instead of the default
2 credits.
P24- Card system (Default, off)
This allows splitting of the coin inputs for 2 player games, allowing the winner of a 2player game to be credited their winnings. This mode requires two card swipers installed on the game and the Card system wired to the 2 nd
Ticket Dispense connector.
P25- Competition mode (Default, off. Adjustable 1-5 )
This setting allows for adjustment of the bonus ramp for in store competitions.
Exceptional players may be able to reach 999 on a regular basis. By adjusting this setting, it can be assured players never reach 999, and thus the winner of a tournament can be established. The settings (1-5) represent the max points per button press. The recommended setting for a competition is 3.
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
AUDITS MODE
The Audits Mode provides statistics on all areas of gameplay. This enables the operator to make calculated adjustments and fine tune the machine to maximize earning potential. The
Audits Mode stores records of the games played since the audits were last reset. While in this mode, the game audits can be reset to zero by holding down the 1 Player Start button for longer than 5 seconds.
Speed of Light has a total of 40 audits that can be viewed. They are A01 to A40 and their codes and values are displayed alternatively on the 4-digit credit display. For example, code
A01 would be displayed as
0 1
, and a value of 421 as
4 2 1
.
Large values such as 21589 are displayed as
- - -
2
and
1 5 8 9
.
* NOTE! *
For audit values that are greater than 4 digits the audits’ values will be displayed in two steps.
The first number, which is displayed as
- - -
2
, has leading dash symbols
The second value is displayed as
1 5 8 9
, which has no dash symbols.
AUDIT PROCEDURE
In this example the final value is 21,589
ENTER AUDITS MODE
The Audits Mode is entered from the Attract Mode by pressing the red test button five times.
A A A A
will be displayed on the 4-digit display.
CYCLE THROUGH AUDITS
Starting from the the audits.
display, the green service button is pressed for cycling through
RESET AUDITS
The entire set of user audits can be reset during any of the audit configurations by holding the start button for longer than 5 seconds. The display will be cleared, and will return to that audit when the start button is released. The value of all audits will be reset to 00,000.
EXIT AUDITS
The Audits Mode is exited into Game History mode by pressing the Test button once.
* NOTE *
Audits will stop incrementing when the value reaches 60,000
Audits must be reset to 00 000 by holding the start button for longer than 5 seconds while in audits mode
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
AUDITS QUICK REFERENCE TABLE
No
Description
A23
A24
A25
A26
A27
A28
A29
A30
A31
A13
A14
A15
A16
A17
A18
A19
A20
A21
A22
A32
A33
A34
A35
A36
A37
A38
A39
A40
A01
A02
A03
A04
A05
A06
A07
A08
A09
A10
A11
A12
Total number of games played ( resettable)
Total 1 player games played ( resettable)
Total 2 player games played ( resettable)
Total multi-player games played ( resettable)
Total Coin Mech. 1
Total Coin Mech. 2
Total Service Credits
Total Link Games
Total 1 player high score bonus wins
Total 2 player high score bonus wins
Total multi-player high scores
Average tickets per game
Highest 1 player game score
Highest 2 player game score
Highest multi-player game score
Total 1 player 999 game scores
Total 2 player 999 game scores
Total multi-player 999 game scores
Total games played (not resettable)
Total 1 player games played ( not resettable)
Total 2 player games played ( not resettable)
Total multi-player games played ( not resettable)
Manufacturer Audits (Total Link Games)
Manufacturer Audits (Highest game score 1PL not resettable)
Manufacturer Audits (Highest game score 2PL not resettable)
Manufacturer Audits (Highest game score MPL)
Manufacturer Audits (High Score Bonus Win 1PL not resettable)
Manufacturer Audits (High Score Bonus Win 2PL not resettable)
Manufacturer Audits (High Score Bonus Win MPL not resettable)
Manufacturer Audits (Total Highest score = 999 1PL not resettable)
Manufacturer Audits (Total Highest score = 999 2PL) not resettable
Manufacturer Audits (Total Highest score = 999 MPL not resettable)
Manufacturer Audits (Total Game Plays not resettable)
Manufacturer Audits (checksum for game audits not resettable)
Manufacturer Audits (coin 1 counter not resettable)
Manufacturer Audits (coin 2 counter not resettable)
Manufacturer Audits (checksum for coin counter not resettable)
Manufacturer Audits (Total Tickets not resettable)
Manufacturer Audits (Total Game Plays not resettable)
Manufacturer Audits (checksum for Average not resettable)
* NOTE! *
“Multi-player” refers to multiple people playing a one-player game
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
AUDITS DETAILED
A01 - TOTAL NUMBER OF GAMES PLAYED
Displays the total number of games played since the audits were last cleared
A02 - TOTAL 1 PLAYER GAMES
Displays the total number of 1 player games played since the audits were last cleared
A03 - TOTAL 2 PLAYER GAMES
Displays the total number of 2 player games played since the audits were last cleared
A04 - TOTAL MULTI-PLAYER GAMES
Displays the total number of multi-player games played since the audits were last cleared
A05 - TOTAL COIN MECH 1
Displays the total number of coin mech 1 pulses since the audits were last cleared
A06 - TOTAL COIN MECH 2
Displays the total number of coin mech 2 pulses since the audits were last cleared
A07 - TOTAL SERVICE CREDITS
Displays the total number of service credits issued since the audits were last cleared
A08 - TOTAL LINK GAME
Displays the total number of link mode games played since the audits were last cleared
A09 - TOTAL 1 PLAYER HIGH SCORE BONUS WIN
Displays the total number of 1 player games that won the “beat the high score bonus” since the audits were last cleared
A10 - TOTAL 2 PLAYER HIGH SCORE BONUS WIN
Displays the total number of 2 player games that won the “beat the high score bonus” since the audits were last cleared
A11 - TOTAL MULTI-PLAYER HIGH SCORE
Displays the total number of multi-player games that “beat the high score” since the audits were last cleared
A12 - AVERAGE TICKETS PER GAME
Displays the average number of tickets won per game, since the audits were last cleared
A13 - HIGHEST 1 PLAYER GAME SCORE
Displays the highest 1 player game score since the audits were last cleared
A14 - HIGHEST 2 PLAYER GAME SCORE
Displays the highest 2 player game score since the audits were last cleared
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
A15 - HIGHEST MULTI-PLAYER GAME SCORE
Displays the highest multi-player game score since the audits were last cleared
A16 - TOTAL 1 PLAYER 999 GAME SCORES
Displays the total number of 1 player games that reached a score of “999” since the audits were last cleared
A17 - TOTAL 2 PLAYER 999 GAME SCORES
Displays the total number of 2 player games that reached a score of “999” since the audits were last cleared
A18 - TOTAL MULTI-PLAYER 999 GAME SCORES
Displays the total number of multi-player games that reached a score of “999” since the audits were last cleared
A19 - TOTAL GAMES PLAYED (Non-resetable)
Displays the total number of games played, and is non-resettable
A20 - TOTAL 1 PLAYER GAMES PLAYED (Non-resetable)
Displays the total number of 1 player games played, and is non-resettable
A21 - TOTAL 2 PLAYER GAMES PLAYED (Non-resetable)
Displays the total number of 2 player games played, and is non-resettable
A22 - TOTAL MULTI-PLAYER GAMES PLAYED (Non-resetable)
Displays the total number of multi-player games played, and is non-resettable
A23 to A40 - MANUFACTURE AUDITS ONLY (Non-resetable)
These are non-resettable audits, and are for manufactures use
GAME HISTORY MODE
By using the Game History Mode the operator can view the score of the last 10 games and the type of game played. The credit display shows the game number, and the corresponding score is viewed on the header display
ENTER GAME HISTORY MODE
The Game History mode is entered from Audits mode by pressing the red test button once, or from the attract mode by pressing the red test button six times. be displayed on the 4-digit display.
will
CYCLING THROUGH GAME HISTORY
The green Service button is pressed for advancing each step through the set of game histories. Starting from the display, H01 is the first step, continuing through to H10. This will loop until the mode is exited.
EXIT
You exit the Game History mode by pressing the red test button once
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
SECTION A: SERVICE INSTRUCTIONS
*NOTE*
Be sure to read the following carefully before servicing the machine
LOCATING AND ACCESSING PARTS
3” Speaker
1 Player Start Button
BAFB45 4” Display
4-digit credit display
Error light
2 player Start/Link button
Coin Cradle
Ticket Dispenser
DBA (optional)
Cash Box (inside coin door)
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
ELECTRONIC DETAIL POSITION
S-150-12
12 VDC PSU
BAFB66A
Main PCB
BAFB106
Sound PCB
BAFB53 Sub Woofer &
Stereo Amplifier PCB
BAFB152
Lamp Driver
PCB
BAFB162
I/O Expansion
PCB
1A Toroid Transformer for Sub Woofer Amp
Fuses for
Transformer Output
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
PARTS DESCRIPTION
COIN MECHANISMS
The coin mechanisms are located inside the coin door, at the front-right of the machine cabinet.
CASH BOX
The cash box is located inside the coin door on the front of the machine cabinet.
SPEAKERS
Two speakers are located in the games header and the subwoofer is mounted in a speaker enclosure in the bottom right hand cabinet box. Access for all speakers is through their rear service panels.
SERVICE CONTROLS
Are located on the service panel, mounted behind the coin door.
GREEN SERVICE BUTTON
Use to input credits to the game without activating the coin counter, and to perform test procedures in combination with the red test button.
RED TEST BUTTON
Used to enter and access the test modes.
VOLUME KNOB
Use to adjust the speaker’s sound level.
POWER CORD
This is a standard IEC power cord, and is plugged in to the power inlet socket at the rear of the machine.
POWER INLET
It is a standard IEC inlet socket, located at the rear of the machine, on the right-hand side as viewed from the rear. Note: there is a main power fuse internal in this IEC socket .
MAINS SWITCH
The mains switch is located on the power inlet assembly, along with the mains fuse and IEC inlet socket.
FUSES- MAIN AC SUPPLY FUSE (1 x 6 AMP FAST BLOW, M205 TYPE)
This fuse is for the main AC supply and is situated in the IEC mains input socket.
* WARNING! *
ALWAYS turn OFF mains power and unplug the game before replacing any fuses, and
ALWAYS use the correct rated fuse.
PCB’s
For location of all game PCB’s, refer to the parts location diagram.
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
POWER SUPPLY
The power supply is located at the back of the cabinet, and is accessed via the rear service door of the machine. It is a 12VDC 12.5A 150-Watt switching power supply.
LAMPS
COIN DOOR LAMPS (LED)
The coin door lamps all are 12V/DC T10 LED or equivalent and can be accessed via the coin door.
BUTTON LAMPS (LED)
The button lamps all are super-bright 12V/DC T10 LED or equivalent and can be accessed via the coin door or back door.
PLATFORM LAMPS
There are multiple white LED Strip Lights 12V/DC inside the platform and Blue LED strip
Lights underneath the platform.
HEADER LIGHTING
There is White LED Strip lights 12V/DC above the BAFB45 4” Display, and behind the header logo and also Blue LED Strip lights in each speaker housing. Each have rear access.
LEFT AND RIGHT CABINET BASE LIGHTING
There are blue LED strip lights in the left and right base cabinet units. Each has access from the front.
* WARNING *
Always turn OFF mains power and unplugged the game, before replacing any lamps.
Always replace the lamps with the same or equivalent size, wattage and voltage.
MAINTENANCE
EXTERIOR
Regularly dust and clean the external cabinet areas as required, using a soft water-damp cloth and mild soap. Check for blown bulbs and replace as required.
Any scratches or marks in the acrylic can be buffed out using car polish or cut and polish. Do not use solvents on the panels as it may affect the finish or artwork.
INTERIOR
Regularly dust and vacuum the interior of the cabinet, taking care to remove any objects that may have fallen on the PCBs. Check and tighten all fixing hardware and fasteners as required.
* WARNING! *
Always turn OFF mains power and unplug game before cleaning the machine interior button switches are operating correctly through the Sound, Lamps and Display, and Switch
Test. Replace any globes, micro switches or buttons that are not work correctly.
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
SECTION B: TECHNICAL DETAILS
It is advised that anybody using SECTION B for repairing or modifying any of the components of the game should be a qualified technician, having at least a basic knowledge of digital components, integrated circuits and electricity.
MAINS VOLTAGE
ADJUSTMENT
POWER SUPPLY
The Switch Mode Power Supply has a switch to set the mains voltage range. It is located at the rear of the game cabinet, and is accessed via the back door. Use a thin blade screwdriver to move the selector switch to the desired mains voltage (See Diagram)
TRANSFORMER CONNECTORS
Locate the machine transformer(s) in the base of the cabinet. If unsure of the location of the transformer(s), refer to Parts location diagram of this manual. Change the position of the
‘ACTIVE’ or ‘HOT WIRE’ input, (marked brown on the diagram), to the position for the desired mains voltage. (See Diagram Below)
6 WAY CONNECTOR PINOUT
4
5
6
2
3
PIN
1
FUNCTION
240VAC
220VAC
120VAC
110VAC
0VAV (NEUTRAL)
EARTH
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
COIN OPTIONS REFERENCE GUIDE
LAI Games have installed on the coin door a 9 way Molex connector. This connector can be used to make adaptors for most electronic coin systems and comparators.
Please see below picture to understand the connection setup.
And the coin harness supplied with the game.
A coin harness that will fit NRI G13 and 2x Electronic Coin Comparator (LAI GAMES standard) is supplied with the game. Other types of coin electronic harnessing can be supplied as requested. Please contact your nearest LAI GAMES Distributor.
TICKET DISPENSER REFERENCE GUIDE
Your Speed of Light is fitted with an “Industry Standard” Deltronics DL-1275 ticket dispenser.
For more information on this ticket dispenser go to www.deltroniclabs.com
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
MAIN PCB FB66 CONNECTOR WIRING
COMPONENTS SIDE SOLDER SIDE
GND 1 A GND
GND 2 B GND
+12VDC 3 C +12V
+12VDC 4 D +12V
5 E Test button
6 F Service button
7 H Player 1 Start Button
8 J Ticket 2 Notch
2 Player Start/Link mode button 9 K Ticket 1 notch
10 L Coin1
11 M Coin2
12 N
(watch dog) 13 P (watch dog)
14 R Credit Display 7seg clock
15 S Credit Display 7seg data
16 T
Player 2 Score Display Data 17 U RSL Board 1 Data (FB152)
Player 2 Score Display Clock 18 V RSL Board 2 Data (FB152)
Player 1 Score Display Data 19 W RSL Board 3 Data (FB152)
Player 1 Score Display Clock 20 X RSL Board Clock (FB152)
GND 21 Y GND
GND 22 Z GND
JST 7
1.Base Light 1
2. Base Light 2
3. Leader Light
4. Base Light 3
5. Base Light 4
6. Base Light 5
7. Error Light
8.
JST 5
1. (PNP) Ticket 1 motor drive
2. (PNP) Ticket 2 motor drive
3. Coin1 counter
4. Coin2 counter
5. Ticket 1 counter
6. Ticket 2 counter
7. Start Button Light
8
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
1
2
3
4
5
6
7
8
BAFB152 LAMP DRIVER PCB CONNECTOR WIRING
J1 (JST 8 Way)
1.
+12V
2.
-
3.
GND
4.
-
5.
Data 1
6.
Data 2
7.
Data 3
8.
Clock
JP1 (4 Way JST)
1.
+12V
2.
+12V
3.
GND
4.
GND
J2. (16 Way Mini Fit Connector)
PIN Description PIN Description
Button 1 Lamp
Button 2 Lamp
Button 3 Lamp
Button 4 Lamp
Button 5 Lamp
Button 6 Lamp
Button 7 Lamp
+12V Out
9
10
11
12
13
14
15
16
Button 8 Lamp
Button 9 Lamp
Button 10 Lamp
Button 11 Lamp
Button 12 Lamp
Button 13 Lamp
Button 14 Lamp
+12V Out
PIN
J3. ( 16 Way Mini Fit Connector )
PIN
PIN
Out Button 1
2 Out Button 2
PIN
10
Description
Out Button 9
7
8
Button 21 Lamp
+12V Out
J5. (16 Way Mini Fit Connector)
PIN Description
1
2
3
4
5
6
7
8
-
-
Button 29 Lamp
Button 30 Lamp
-
-
-
+12V Out
15
16
Button 28 Lamp
+12V Out
PIN Description
9 -
10 -
11 -
12 -
13 -
14 -
15 -
16 +12V Out
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
BAFB162 INPUT LIST
J1. PWR
1.
+12V
2.
+12V
3.
-
4.
-
5.
GND
6.
GND
7.
-
8.
-
J2. INPUT ( 24 Way Mini Fit Connector )
PIN Description
5
6
7
8
1
2
3
4
Button 29
Button 30
Button 31
Button 32
Button 33
Button 34
Button 35
Button 36
9 Button 37
10 Button 38
11 Button 39
12 Button 40
J5. INPUT ( 20 Way Mini Fit Connector )
PIN
13
14
15
16
17
18
19
20
21
22
23
24
Description
Button 11
Button 12
Button 13
Button 14
Button 15
Button 16
Button 17
Button 18
Button 19
Button 20
Button 21
Button 22
PIN Description
5
6
7
8
1
2
3
4
9 -
10 -
-
-
-
-
-
-
-
-
PIN
11
12
13
14
15
16
17
18
19
20
Description
-
-
Button 23
Button 24
Button 25
Button 26
-
-
Button 27
Button 28
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
SPEED OF LIGHT MAIN WIRING DIAGRAM
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
SPEED of LIGHT MAIN WIRING 2
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
SPEED of LIGHT MAIN WIRING 3
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
SPEED of LIGHT CONTROL WIRING
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
SPEED of LIGHT CONTROL WIRING 2
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
SPEED of LIGHT CONTROL WIRING 3
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
SPEED of LIGHT OPTIONAL WIRING
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
SPEED of LIGHT POWER WIRING
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
DISCLAIMER
OPERATOR WILL TAKE NOTE.
BY ACCEPTING DELIVERY OF AND PLACING THIS HARDWARE AND LICENSED SOFTWARE INTO
OPERATION, OPERATOR REPRESENTS AND WARRANTS THAT IT WILL ONLY OPERATE THE
HARDWARE AND LICENSED SOFTWARE PROVIDED BY LAI GAMES IN COMPLIANCE WITH
THE REGULATORY REQUIREMENTS OF THE COUNTRY, STATE, AND/OR MUNICIPALITY IN
WHICH THE HARDWARE AND LICENSED SOFTWARE ARE USED AND/OR OPERATED. LAI
GAMES HAS PROVIDED THIS HARDWARE AND LICENSED THE SOFTWARE ONLY FOR
LEGITIMATE AND LEGAL USE, AND ANY USE OF THE HARDWARE AND LICENSED SOFTWARE
IN A MANNER THAT VIOLATES ANY LAWS OF THE COUNTRY, STATE, AND/OR MUNICIPALITY
IN WHICH THE HARDWARE AND LICENSED SOFTWARE ARE USED AND/OR OPERATED IS
WHOLLY UNAUTHORIZED AND SHALL BE AT OPERATOR’S SOLE AND COMPLETE RISK.
Operator assumes any and all risk and liability for any civil or criminal legal claims or causes of action arising from the unauthorized use and/or operation of the provided hardware and licensed software, such improper and unauthorized use specifically including, but not limited to:
(a)
Operating or allowing the operation of the hardware and licensed software in a manner that violates the laws and regulations of the country, state, and/or municipality in which the hardware and licensed software are used or operated;
(b)
Assembling or causing the assembly of the hardware in a manner not authorized by or disclosed in this manual;
(c)
Any tampering with, changes to, or modifications of the licensed software that occur after the software leaves LAI GAMES factory that is not made by authorized LAI GAMES personnel and that is directly or indirectly caused by
Operator; and
(d)
Any tampering with the computer chip/electronic programmable read only memory (EPROM) by or on behalf of Operator that directly or indirectly causes the tamper-indicating holographic seal on the computer chip/EPROM to be broken or damaged in any way.
LAI GAMES shall have no liability related to such improper and unauthorized use and/or operation of the hardware and licensed software, and Operator shall indemnify, defend, and hold LAI GAMES harmless for any claim or cause of action brought against LAI GAMES arising from Operator’s or Operator’s representative’s improper and unauthorized use and/or operation of the hardware and licensed software.
ANY IMPROPER AND UNAUTHORIZED USE SHALL COMPLETELY AND TOTALLY VOID ANY AND
ALL WARRANTIES, BOTH EXPRESS AND IMPLIED, OF THE HARDWARE AND LICENSED
SOFTWARE PROVIDED BY LAI GAMES.
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
WARRANTY
LAI Games warrants its manufactured products for a period of 3 months inclusive of parts and labor from the date of sale.
LAI Games exclusive obligation is to repair any item with any defects as a result of faulty workmanship or materials, providing the defective item or items of equipment are returned to the LAI GAMES distributor from which the machine was purchased.
LAI Games shall have no obligation to make repairs necessitated by negligence or interference to any component by any unauthorized personal. This will automatically void any existing warranty.
IF MAKING A WARRANTY CLAIM:
(a)
A Copy of the sales invoice must accompany the claim.
(b)
To and from Transport and freight costs are not covered by the warranty.
(c)
Warranty is not transferable with the sale of a machine from one owner to another.
To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project