P E R F O R M A N C E S P E C I F I C A T I O N S

Brightness (±10%) / Contrast (full on/off) sx+ 3D: 2,000 ANSI / 3500:1 sx+ W-3D: 2,000 ANSI / 3500:1

Display Type

DarkChip™ DMD

3D Stereo Features

3D compatibility:

Twin (two channel) input, digital or analog up to 120 Hz (fps) L/R

Shutter Glasses:

DLP Link or IR emmitted sync

Supported 3D display refresh rates:

96 - 120 Hz

Advanced:

Shutter glass phase sync adjustment

Advanced switching period adjustment

Sequential Color Management

Six-segment color wheel with Brilliant Color™

Native Resolution

1400 x 1050 pixels

Computer Compatibility

Up to 1600 x 1200

Video Compatibility

HDTV, NTSC, NTSC 4.43, PAL, PAL-M,

PAL-N, SECAM; HDCP on DVI & HDMI; automatic film mode detection (3:2 and

2:2 pulldown)

Aspect Ratio

4x3

(native)

Bandwidth (up to)

165 MHz on Dual Head DVI-D

Throw Ratio sx+: sx+ W:

1.7-2.2:1

1.0:1

Throw Distance

1.5-10 meters (5-33ft)

Image Size

0.7-5.5 meters (2.5-18ft) wide

Image Offset sx+: 9%

Lamp Type

220W VIDI UHP™

Lamp Life (Typical)

1

2,250 hours -lamp high

3,000 hours -lamp low

Mechanical Mounting

Front/rear table

Front/rear ceiling

Adjustable front/rear feet

Operating Noise Level

28dB

Dimensions (chassis only)

10.9in(L) x 10.9in(W) x 4.4in(H)

278mm(L) x 278mm(W) x 110mm(H)

Weight (chassis only)

3.4kg (7.5lbs)

Standard Accessories

Ceiling mount cable cover

Cabinet Color

Grey i V i s i o n 3 0 s x + 3 D • i V i s i o n 3 0 s x + W - 3 D

O v e r v i e w

Digital Projection International proudly introduces an amazingly compact and portable active 3D display - the single chip iVision

30sx+ 3D. Surprisingly bright and capable for it’s size, the iVision 30sx+ 3D represents the highest bandwidth and quietest implementation of DarkChip™ single-chip DLP technology available today. With an SXGA+ native resolution DMD serving as the image modulator, the iVision 30sx+ 3D renders accurate and resolute large-screen imagery, in both 2D and 3D. It is perfect for supporting mobile 3D presentations, as well as for fixed 3D applications with smaller screens or in low ambient light environments.

Equipped with standard inputs for traditional 2D sources, the iVision 30sx+ 3D also incorporates twin VGA and twin DVI inputs, enabling connectivity to active 3D sources up to 120 Hz. A 3D sync output is available to drive 3D IR emitters, synchronizing 3D shutter glasses with the left and right eye timing of the displayed

3D content. To assure optimum color calibration and long-term accuracy, DP’s ColorMax™ technology is included, and via a straightforward user Interface, can be applied to all sources.

The iVision 30sx+ 3D’s intuitive user interface and extensive source compatibility assure it is simple to integrate, control and operate. The new iVision features an off axis optical design, supported by a geometrically precise zoom lens or an optional short-throw fixed lens. The projector’s low-cost, ultra efficient

UHP lamp system and inherent digital stability position the iVision

30sx+ 3D as a best-in-class projection solution for a diverse range of customers and 3D applications, including:

•

•

•

•

•

•

•

•

Immersive visualization

Industrial training and simulation

Electronic and mechanical engineering

Chemical and pharmaceutical

Geological exploration

Medical research and training

Theme Park 3D entertainment

Dramatic 3D home entertainment

As is the case with all Digital Projection displays, our careful engineering guarantees the iVision 30 sx+ 3D provides remarkable imaging and reliability for the long-term. Equally important, our legacy in superior customer and technical services assures our experienced support staff is always available to address your needs.

I N P U T / O U T P U T C A P A B I L I T I E S

Input

*

Twin VGA

Twin DVI-D

Component Video

(SDTV/HDTV)

S-Video

Composite Video

USB for mouse connection and firmware upgrade

LAN

IR Emitter Output

Connector

D Sub (15-pin)

DVI-D

RCAx3

4-pin mini DIN

RCA

USB

RJ45

3-pin DIN

BNC (with loop-thru)

1

1

1

1

1

1

Quantity

SX+

2

2

1

Specifications subject to change without notice

DP V2.0 3/10 ©2010 Digital Projection, Inc.

DLP®, Digital Light Processing™ and DMD are trademarks of Texas Instruments, Inc.

iVision 30 3D Series

W1

P r o j e c t o r D i m e n s i o n s

Projector dimensions (in)

L1 9.6 W1 10.9 H1 3.5

Projector dimensions (mm)

L1 244 W1 278 H1 88 iVision 30 3D side panel iVision 30 3D back panel

A D V A N C E D T E C H N I C A L S P E C I F I C A T I O N S

PARAMETERS

HDTV Formats Supported

Scan Rates Supported

Remote Control

Automation Control

Operating/Storage Temperature

Operating Humidity

Thermal Dissipation

Fan Noise

Power Requirements

Power Consumption

Safety and EMC Regulations

Projector

iVision 30sx+ 3D iVision 30sx+ W-3D

Lens

1.7 - 2.2:1

1.0:1

1080p, 1080i, 720p, 576i/p, 480i, 480p, 24p

Horizontal: 15 - 150 kHz; Vertical: 48 - 190Hz, 3D sources: 96 - 120 Hz

Remote wireless IR

RS232 9-pin D sub / RJ45 LAN

Operating: 0 to 40°C at 0-1500m, 0 to 35°C at 1500-3000m / Storage: -10 to 45°C

20 to 90% RH

<1120 BTU/hr

28dB at 20°C (68°F)

100 - 240 VAC +/- 10%, 50/60Hz

350W

UL, CE, FCC Class A

Part #

109-381

109-382

Accessories

220 Watt Lamp & Housing for iVision 30sx+ 3D (VIDI) iVision 30 Adjustable ceiling mount

Infrared remote (replacement)

24/7 Maintenance Kit

Part #

108-617

102-543

104-142

107-748

C O R E T E C H N O L O G Y

TM

1 Based on 4-6 hour/day operational profile. Venue and application conditions may impact actual lamp life.

See Digital Projection’s Product Warranty Statement for details on lamp warranty.

DIGITAL PROJECTION, INC. • 55 CHASTAIN ROAD, SUITE 115 KENNESAW, GA. 30144 • T: 770.420.1350 • F: 770.420.1360 • www.digitalprojection.com

DIGITAL PROJECTION, LTD. • GREENSIDE WAY, MIDDLETON MANCHESTER, UK. M24 1XX • T: +44.161.947.3300 • F: +44.161.684.7674 • www.digitalprojection.co.uk

DIGITAL PROJECTION, CHINA • TOWER C, RM C1202, CAI FU JIA YUAN, NO. 19 XIA0 YING STREET, CHAOYANG DISTRICT BEIJING, PR CHINA 100101 • T: +86.10.58239771• F: +86 10 58239770

DIGITAL PROJECTION, ASIA • 16 NEW INDUSTRIAL ROAD, #02-10 HUDSON TECHNOCENTRE SINGAPORE 536204 • T: +65.6284.1138 • F: +65.6284.1238