advertisement
封面內頁 封面內頁
9001URF
Wireless Keyboard & Mouse Kit
User’s Guide
Version 1.0
The information in this document is subject to change without notice and does not represent a commitment on the part of the vendor.
No warranty of representation, either expressed or implied, is made with respect to the quality, accuracy or fitness for any particular purpose of this document. The manufacturer reserves the right to make changes to the content of this document and/or the products associated with it at any time without obligation to notify any person or organisation of such changes.
In no event will the manufacturer be liable for direct, indirect, special, incidental or consequential damages arising out of the use or inability to use this product or documentation, even if advised of the possibility of such damages.
Copyright © 2001. All rights reserved
IBM, PC/AT and PS/2 are registered trademarks of International Business Machines Corporation.
Microsoft, Windows, and Windows NT are registered trademarks of Microsoft Corporation in the United
States of America and/or other countries.
All other trademarks are trademarks of their respective holders.
Table of Contents
1 Introduction.................................................................................................1
What's in this package ..............................................................................1
2 System Requirements ................................................................................3
3 Hardware Installation ................................................................................5
4 Software Installation ................................................................................13
4.1 Keyboard Driver Installation............................................................13
4.2 Mouse Driver Installation .................................................................13
5 Using the Keyboard and Mouse............................................................15
5.1 Using the Keyboard .........................................................................15
5.2 Using the Mouse Driver ....................................................................16
6 Troubleshooting ........................................................................................21
1 Introduction
Congratulations on your purchase of this wireless RF keyboard and mouse!
This keyboard and mouse will finally free you of the constraints of your desktop by providing a wireless connection between your keyboard/mouse and your PC. Pass around the keyboard or mouse during meetings without having to bother about a cable blocking your way or write e-mails and surf the Internet from the comfort of your living room couch!
This keyboard and mouse kit consists of a keyboard, a mouse and a receiver. The keyboard and mouse can operate freely within a radius of at least 3.28 feet (1meter) from the receiver, which itself has a maximum range from your PC of around 3.28 feet (1meter). The wireless keyboard contains seven Internet keys and one ACPI key to make you save more hand-movement and access to Internet much quickly. Beside, the wireless mouse uses an optical sensor instead of mouse ball. The precise sensor detects motion on hundreds of surfaces, including wood, plastic, or even your pants leg, and prevents you from the interference caused by dust. Because the keyboard and mouse use radio frequencies to transmit the wireless signal it has no constrictions on viewing angles such as with infrared devices like your TV’s remote control, etc.
Besides providing unprecedented freedom of movement when operating the keyboard or mouse, the kit also offers more extra functionality by introducing dedicated buttons for often used Internet browser functions as well as Sleep functions. ( Please note : The Internet keys work only under Microsoft Internet Explorer 5.0 or later version!).
And last but not least, this package also provides a special driver, which provides unique shortcut functions.
In order to enjoy your keyboard and mouse to their full potential we recommended you read this manual carefully prior to installation.
What's in this package
A wireless keyboard with palmrest
A wireless mouse
A receiver
1
A driver CD
Batteries (2 pcs of AA; 2 pcs of AAA alkaline batteries)
2
2 System Requirements
Microsoft Windows 98, Windows ME, Windows 2000 or Windows
XP operating system
Microsoft Internet Explorer 5.0 or later version (for the Internet keys)
The system supporting ACPI or APM II (for power management buttons)
ATX mother board and ATX power supply (for power management buttons)
Please refer to table below for the other system requirements for the features.
Function Description
Windows NT 4.0 /
Windows 95 /
Windows 98
Operating System
Windows ME /
Windows 2000 /
Windows XP
Wireless
Functionality
Keyboard Extra
Multimedia Buttons
Available immediately after hardware installation
Requires keyboard driver installation (see driver CD for details)
Available immediately after hardware installation
Requires keyboard driver installation (see driver CD for details)
Keyboard Extra
ACPI Keys
Requires enabling of system ACPI (Power
Management) function
Available immediately after hardware installation
Keyboard Battery
Low Function
Keyboard LED Light
Function
Mouse Driver
Shortcut Function
Requires installation of keyboard driver (see driver CD for details)
Requires installation of keyboard driver (see driver CD for details)
Requires installation of mouse driver (see driver
Requires installation of keyboard driver (see driver CD for details)
Requires installation of keyboard driver (see driver CD for details)
Requires installation of mouse driver (see driver
3
4
CD for details) CD for details.)
3 Hardware Installation
Slide Switch Setting
Step 1: Make sure your PC is switched off.
Step 2: Take the receiver and select channel CH1 or CH2 by using the slide switch on the side of the receiver. ( Remember your selection.
)
CH2
CH1
Back View of Receiver Channel Switch of Receiver
Step 3: Connect the receiver to your PC by plugging in the receiver’s USB into your PC.
Front View of Receiver Plug Back View of Receiver Plug
Step 4: Take the keyboard and make sure the batteries on the back are installed correctly. (Follow the polarity signs in the battery compartment.)
5
6
Bottom View of Keyboard
(-)
Battery 1.5V 2pcs
(+) ID Button
Channel Switch
Step 5: Use the slide switch on the back of the keyboard to select the same channel as the one selected in step 2 on the receiver.
Channel Switch & ID Setting of keyboard
CH1 CH2
ID Button
Step 6: Take the mouse and make sure the batteries on the back are installed correctly. (Follow the polarity signs in the battery compartment.) utton
Bottom View of Mouse
Step 7: Use the slide switch in the battery compartment of the mouse to select the same channel as the one selected in step 2 and 5.
(Open the battery cover to find the switch channel setting)
Channel Switch of Mouse
Remarks:
1.
Both of the keyboard and mouse use 2pcs.standard UM-3 (AA) 1.5V
alkaline batteries.
2.
Battery life is approximately 3-4 months, depending on the intensity of usage.
3.
Make sure the receiver is placed in a location where is relatively free of
7
8 strong electromagnetic or transmission sources in order to ensure optimal reception of the keyboard and mouse signal.
ID Setting
This wireless keyboard kits contains 2 channels, and each channel contains 256 sets ID. This extra ID-recognition function helps to protect against interference from other RF keyboards in the same environment.
After completing the hardware installation you must set the ID of the receiver, mouse and keyboard.
Step 1: Press the ID button on the top of the receiver once.
ID Button of Receiver
ID Button
Step 2: Press the ID button on the bottom of the mouse once.
utton
ID Button of Mouse
Step 3: Press the ID button on the bottom of the keyboard once.
ID Button of Keyboard
CH1 CH2
ID Button
Remarks:
1.
You must follow the procedure above to set the ID of receiver, mouse and keyboard. Once the receiver ID button is pressed you have 35 seconds to complete the entire process, or you will need to begin
9
10 again.
2.
Once the keyboard and receiver are plugged in, the yellow receiver light will flash. Once the ID is set, it will remain steadily lit..
3.
When changing the batteries of keyboard or mouse, there is no need to reset all the ID’s. Simply reset one of them.
4.
When the keyboard batteries are low, a battery low icon will show on the right-bottom corner of the Windows task bar instead of the KeyMaestro driver icon .
5.
When the mouse batteries are low, a battery low icon will show on the right-bottom corner of the Windows task bar instead of the
KeyMaestro driver icon .
6.
The optical mouse is designed to conserve battery life and will enter a power saving “Sleep” mode if it is inactive for 20 minuties. Click a button on the mouse to wake it up. Move the mouse does not wake it up.
Detachable Palmrest
At your discretion, you may choose to connect the palmrest with keyboard.
To connect the palmrest with the keyboard please follow figure 1 & figure
2.
Figure 1
11
12
Figure 2
4 Software Installation
After finishing the hardware installation as described in this manual and starting up your PC, you should be able to immediately take advantage of the wireless function of the wireless keyboard and mouse. If the keyboard and mouse are not working properly, see Chapter 6
Troubleshooting for tips on how to solve your problem.
4.1 Keyboard Driver Installation
If your operating system is Windows ME, Windows 2000 or
Windows XP, you can immediately take advantage of the extra function buttons on the keyboard (except ‘Battery Low’ and
‘LED Light’ functions). But, if your operating system is Windows 98, you will have to install the keyboard driver software to take advantage of these functions. The keyboard driver program is located on the driver CD included in the box.
1.
Insert the driver CD into your computers CD-ROM drive.
2.
Run the setup.exe in the \keyboard-driver directory of the driver CD.
3.
Follow the onscreen instructions to finish the installation procedure.
4.
For detailed information on how to install the driver, please refer to the readme.htm file.
4.2 Mouse Driver Installation
In order to take advantage of the special shortcut button functionality of the mouse you will have to install the mouse driver which is located on the driver CD included in the box.
1.
Make sure the driver CD is in your computers CD-ROM drive.
2.
Run the setup.exe in the \mouse-driver directory of the driver disk.
3.
Follow the on screen instructions to finish the installation procedure.
13
14
4.
For detailed information, please refer to the readme.htm file.
5 Using the Keyboard and Mouse
5.1 Using the Keyboard
Besides the usual keys, this keyboard also has extra-dedicated keys, which provide the following ACPI, multimedia and Internet functionality: z
ACPI Keys:
Your keyboard has the power management keys that are Power off, Sleep, and Wake up three keys. They are also can be called
ACPI (Advanced Configuration and Power Interface) keys.
As these ACPI keys are performed not completely under Windows
98; the KeyMaestro driver provides an option to enable the ACPI keys. When the option is enabled, the driver will take Windows' place to process these keys.
Note : For detailed information, please read the online help by right clicking the mouse on the KeyMaestro Keyboard icon in the
Windows task bar and selecting Help.
Power Off
Sleep
Closes the operating system and powers down the system.
P.S: Although this key is a standard key under Windows 98, Windows 98 processes it as a Sleep key.
Puts your system to sleep (power-saving) mode. Any key will wake up your system and return to the previous working status.
Wake Up
Wakes up your system and returns to the previous working status.
15
16 z
Multimedia Keys
There is a row of multimedia keys on the top of keyboard. The functions are described as below:
Help Display the help file on the screen.
Shortcut
WWW
Search
Favorites
Folder
WWW
Home
Volume
Control
Mute
Play/Pause
Stop
Provide you to create an easy access to the documents and programs you use most often. The default setting for
Shortcut button is to launch Windows accessory program 'Notepad'.
Launches to your Internet Browser application and go to the Search Engine web site.
Opens My Favorite folder for you to select your favorite web site.
Launches to your Internet Browser application which should be preinstalled. If you have installed two browsers in your system, the system default one will be opened. Mostly the system default is the later installed one.
Controls the volume to up or down of your audio output to the speakers.
Note : All these keys are not reprogrammable.
Mutes the sound output. Repress this button to resume.
When the CD or Video is playing, press this button to pause it, and press the button again to resume it from the current position.
Stops the playing.
Previous/
Fast
Backward
Next/
Fast
Forward
Eject
Skips backward to the previous file/track or play backward fast when pressing once quickly.
Skips forward to the next file/track or play forward fast when pressing once quickly.
Ejects/ loads the CD tray.
5.2 Using the Mouse Driver
After installing the mouse driver as described in Chapter 4 you will be able to startup the Mouse Control Panel by right clicking on the
KeyMaestro Mouse icon in the Windows task bar.
This should appear after restarting your machine.
The Mouse Control Panel (KeyMaestro Mouse Properties) window consist of the following folders:
Buttons folder: allows you to change Button
Configuration and Double
Click Speed.
Pointers folder: allows you to change your favorite cursor shape.
Wheel folder: allows you to change the speed of scroll wheel.
17
18
Mouse folder: allows you to change the scroll wheel function. There are 7 functions can be chose, including Quick Jump, Double Click,
Window Zoom, Switch AP, Auto Panning, WWW Back and
WWW Forward. The default of the scroll wheel is “Quick Jump”.
The Definition of Mouse Extra Function:
Function Definition
Quick Jump
Let you to open 8 special functions quickly.
For the detailed, please refer to the ” Quick Jump Function
Introduction ” in next section.
Double Click
Replace the "double click" movement to activate an application or function, it can save the valuable mouse-clicks.
Window Zoom
To magnify or de-magnify the data view of a document in an application that supports it. (this function is workable when the application you used is with the ctrl + wheel scrolling function, ie Word,
Excel, PowerPoint and FrontPage ...)
Switch AP
Auto Panning
Switch quickly from one opened application to the other applications without extra cursor move. Press the “Switch AP” button you set and scroll the wheel button to switch the applications.
Move the cursor and then the document will scroll slowly in the direction you just moved.
WWW Back Return to the last page you viewed.
WWW Forward View the next page you viewed before.
Quick Jump Function Introduction
Also, after installing the mouse driver and invoking the
KeyMaestro mouse driver program you will have access to 9 special function icons by pressing the scroll wheel once. These 9 functions are:
Mouse Control Panel
Activate the Mouse Control Panel
Menu.
Control Panel Activate the “Control Panel” window.
Horizontal Scroll Bar
Vertical Scroll Bar
Windows Explorer
Size Grip
Set the cursor to the horizontal scroll bar to scroll the document horizontally. (the function does not support Windows XP)
Set the cursor to the vertical scroll bar to scroll the document vertically.
(the function does not support Windows XP)
Activate the 'Windows Explorer' window.
Adjust the frame size of the windows you opened (the function does not support full screen. The function is also not performed when the frame of applications are not adjustable).
Minimize All Windows
Allow you to minimize all the current opened applications immediately
(this function is only performed when the applications are with the minimize function)
Recall the Last Active
Window
Recall the last active window.
Exit Exit the quick jump function panel.
Clicking once more on the scroll wheel will close these icons.
For more detailed information please read the online help by right
19
20 clicking on the KeyMaestro Mouse icon in the Windows task bar and select Help.
6 Troubleshooting
If you are experiencing problems with your keyboard or mouse please check the following:
1.
Take out the receiver’s connector and check the receiver’s plug for possible broken pins. If the plugs appear normal then reinsert the plugs on your PC.
2.
Check to see if the batteries in the keyboard and mouse are installed correctly. Make sure the polarity of the batteries corresponds with the polarity signs in the battery compartment.
3.
Replace the batteries to make sure the batteries are not low in power.
4.
It is strongly recommended to place the receiver in front of the monitor in order to prevent signal disturbance from the monitor.
5.
If your PC system’s BIOS setup has options for the keyboard or mouse
- make sure they are set to default settings. If you are not familiar with the BIOS, refer to your PC’s manual for more information.
6.
If you have problems using the sleep button - make sure that the power management in your PC has been enabled both in the BIOS and in Windows. For more information on your PC’s BIOS settings refer to your PC’s manual. For more information on how to enable the power management features in Windows, refer to your Windows manual.
7.
If you have problems using the extra browser buttons and/or the special mouse functions - make sure you have installed the keyboard and mouse driver correctly as described in this manual’s Chapter 4:
Software Installation. Also check your hardware requirements meet those listed in this manual
8.
Use the mouse only on a clean, flat, non-slippery surface in order to ensure smooth and accurate cursor action. If you use a mouse-pad, choose a light-colored one, not a dark one, to use less battery power.
9.
Keep all items away from direct sunlight, moisture, dirt, extreme heat and abrasive chemical (cleaning) solutions.
10.
Should the receiver, the keyboard or mouse become accidentally
21
immersed or splashed by liquids, switch off your PC immediately, unplug all items and refer to your dealer for further assistance. In these cases please refrain from using any of the items before consulting with your dealer!
If above troubleshooting suggestions still do not solve your problem then please refer to your direct dealer for technical support.
22
封底內頁
FCC GUIDELINES
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna
Increase the separation between the equipment and receiver
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
The Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment
Regulation.
Cet appareil numerique de la class B respecte toutes les exigences du Règlement sur le materiel brouilleur du
Canada.
Caution:
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. Shielded interface cable, if any, must be used in order to comply with emission limits.
封底
3100505100
Version 1.0
June 2002
Printed in China
advertisement
Related manuals
advertisement