aa
Before you get started
Activate the Dash
To activate The Dash connect The
Charger including The Dash to your computer via the USB Cable.
The Dash is activated when the
LightGuide flashes blue. You may now safely eject and disconnect at any time.
Download the Bragi App on bragi.com
Register your Dash through the bragi app to get full support.
Bragi App
Download it
Customize
Download the free Bragi App now to personalize and set up your Dash bragi.com/app
Download from
Windows Phone Store
How to charge
The Dash & Charger
Place The Dash in The
Charger and make sure it sits on the MagSnap.
BRAGI
BRAGI
To charge the battery, connect The Charger to your Computer or another power source via USB
The Charger fully charges The Dash up to 5 times while on-the-go.
How to check the battery
The Dash & Charger full high medium low full full
Shake The Dash high
And you will see the current full battery status of your Dash.
low high full high medium low medium low full high high medium low medium low high full medium high medium low low full
Check out the LED on the side of The Charger to see the current battery status. The Dash needs to be placed in
The Charger or The Charger needs to be connected to a power source.
How to insert
The Dash
Take The Right Dash, tilt it slightly forward and insert the speaker tip into your ear canal.
Adjust to a PerfectFit by rotating The Dash backwards until it feels comfortable and secure in your ear.
How to wear
The PerfectFit
With The PerfectFit you should feel The Dash completely closing off your ear canal while it sits snugly in your ear.
Achieving The PerfectFit may require some adjustment. To adjust you can use one hand to lift up in your ear and adjust with the other. By doing this you should be able to press the upper part of The
Dash into a locked position as shown in the diagram above.
How to change
The FitSleeves
The Dash is already fitted with XS
FitSleeves. Try different sizes to find your PerfectFit.
The PerfectFit is important to maximise performance of The Dash and accuracy the DataHub.
M
L
S
XS
v 1.0, 201603, V2B QSM English
Model B1000, B1000H, B1000C, B1000L, B1000R
Bragi GmbH , Munich, Germany, Earth
Copyright ©2015 Bragi GmbH. All rights reserved. BRAGI, The Dash, and the B logo are trademarks of Bragi GmbH in the U.S. or one or more other countries. The absence of a product or service name or logo from this list does not constitute a waiver of Bragi GmbH trademark or other intellectual property rights concerning that name or logo.
Patents pending.
How to interact
Basic gestures
Touch Control
Left Dash
Track
Right Dash
Listen & Communicate
-
Activity feedback
Audio Transparency On/Off
Pairing mode Activity Data
Activity Menu Start / Exit
Start / End activity
Next activity
Tap
2x Tap
Swipe
5 sec
Hold
Tap
Tap
Hold
2x Tap
Play / Pause music
Next song
Volume Up / Down
Pairing mode Audio
Playlist Menu Start / Exit
Select playlist
Next playlist
Answer a call
End a call
Only R Dash inserted
Activate standalone mode
5 sec.
How to connect
Bluetooth & The Dash
Touch and hold The Right Dash for
5 seconds to enter pairing mode.
Select The Dash in your Bluetooth settings and connect.
connection visible for max. 2 minutes
What’s inside the box?
The Dash
Manual & Registration
Reveal all features bragi.com/support
Experience the full capabilities of
The Dash & reveal all of it‘s exciting features.
The Dash
The Charger &
The Slide
FitSleeves
XS / S / M / L
USB to
Micro USB Cable
Quick Start Guide
The Dash
A
CE statement ：
Do not use the product in the environment at too high or too low temperature, never expose the product under strong sunshine or too wet environment.
The suitable temperature for the product and accessories is 0 ℃ -50 ℃ .
CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS
Excessive sound pressure from earphones and headphones can cause hearing loss.
The device has been evaluated to meet general RF exposure requirement, The device can be used in portable exposure condition without restriction
FCC statements:
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or changes to this equipment. Such modifications or changes could void the user’s authority to operate the equipment.
FCC RF exposure:
The device has been evaluated to meet general RF exposure requirement, The device can be used in portable exposure condition without restriction
IC statement:
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device.
Should be translated to:
Cet appareil est conforme avec Industrie Canada RSS exemptes de licence standard(s).
Son fonctionnement est soumis aux deux conditions suivantes:
(1) cet appareil ne peut pas provoquer d'interférences, et
(2) cet appareil doit accepter toute interférence, y compris celles pouvant causer un mauvais fonctionnement de l'appareil.
IC RF exposure:
The device has been evaluated to meet general RF exposure requirement, The device can be used in portable exposure condition without restriction
