HP notebook computers, desktops, thin clients, personal workstations User Guide
Реклама
Реклама
Regulatory, Safety and Environmental
Notices
User Guide
© Copyright 2012, 2013 Hewlett-Packard
Development Company, L.P.
Bluetooth is a trademark owned by its proprietor and used by Hewlett-Packard
Company under license. ENERGY STAR is a registered mark owned by the U.S.
government. Java is a trademark of Sun
Microsystems. Microsoft and Windows are
U.S. registered trademarks of the Microsoft group of companies.
The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services.
Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
Ninth Edition: December 2013
First Edition: March 2012
Document Part Number: 689409-009
About This Guide
This guide provides regulatory, safety and environmental information that is compliant with U.S.,
Canadian, and international regulations for notebook computers, desktops, thin clients and personal workstations.
WARNING!
Text set off in this manner indicates that failure to follow directions could result in bodily harm or loss of life.
CAUTION: Text set off in this manner indicates that failure to follow directions could result in damage to equipment or loss of information.
NOTE: Text set off in this manner provides important supplemental information.
iii
iv About This Guide
Table of contents
Declaration of Conformity for products marked with the FCC logo (United States only) ..... 3
Products with wireless LAN devices or HP Mobile Broadband Modules ............................. 3
European telephone network declaration (Modem/Fax) ..................................... 5
Germany (English text) ....................................................................... 5
Germany (Deutscher text) .................................................................. 5
Wireless LAN 802.11 devices/Bluetooth devices/Short range devices ............................... 8
v
vi
Declaration of conformity for products marked with the FCC logo (United
Products with wireless functionality (EMF) ....................................... 21
Restrictions for product with wireless functionality ........................... 21
European telephone network declaration (Modem/Fax) ................... 21
Ergonomics notice ............................................................................ 21
Wireless LAN and Bluetooth certification markings .......................................... 22
Wireless LAN 802.11 devices/Bluetooth devices/Short range devices ............. 23
vii
viii
The Table of Toxic and Hazardous Substances/Elements and their Content ................... 48
Ley para el Aprovechamiento Sustentable de la Energía de México (Mexico Sustainable Energy
1 Regulatory notices for notebook computers
This chapter provides country- and region-specific non-wireless and wireless regulatory notices and compliance information for the computer product. Some of these notices may not apply to your product.
이 문서는 유선 및 무선 제품관련 한국 규격관련된 공지를 같이 포함하고 있습니다. 제품의 특성에 따
라 일부 공지는 해당 제품에 적용되지 않을 수 있습니다.
One or more integrated wireless devices may be installed. In some environments, the use of wireless devices may be restricted. Such restrictions may apply on-board airplanes, in hospitals, near explosives, in hazardous locations, and so on. If you are uncertain of the policy that applies to the use of this product, ask for authorization to use it before you turn it on.
Regulatory markings for your country or region may be located on the bottom of the product, either under the battery, under a user-removable door (or some other user-accessible location), or on the wireless or modem module.
For Windows 7, to view the FCC IDs for any radio modules in your notebook (such as Bluetooth®,
WLAN, or WWAN), follow these steps:
1.
Turn on or restart the computer, and then press esc while the "Press the ESC key for Startup
Menu" message is displayed at the bottom of the screen.
2.
Press f10 to enter BIOS Setup.
3.
Select the System Configuration menu.
For Windows 8, follow these instructions:
1.
Turn on or restart the computer, and then press esc while the "Press the ESC key for Startup
Menu" message is displayed at the bottom of the screen.
2.
Press f10 to enter Computer Setup.
The FCC IDs are displayed at the bottom of the screen.
CAUTION: Devices not for sale or use in the United States may not have an FCC ID.
1
Federal Communications Commission notice
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
● Reorient or relocate the receiving antenna.
● Increase the separation between the equipment and receiver.
● Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
● Consult the dealer or an experienced radio or television technician for help.
Modifications
The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by HP may void the user's authority to operate the equipment.
Cables
To maintain compliance with FCC Rules and Regulations, connections to this device must be made with shielded cables having metallic RFI/EMI connector hoods.
2 Chapter 1 Regulatory notices for notebook computers
Declaration of Conformity for products marked with the FCC logo (United States only)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following 2 conditions:
1.
This device may not cause harmful interference.
2.
This device must accept any interference received, including interference that may cause undesired operation.
If you have questions about the product that are not related to this declaration, write to
Hewlett-Packard Company
P. O. Box 692000, Mail Stop 530113
Houston, TX 77269-2000
For questions regarding this FCC declaration, write to
Hewlett-Packard Company
P. O. Box 692000, Mail Stop 510101
Houston, TX 77269-2000 or call HP at 281-514-3333
To identify your product, refer to the part, series, or model number located on the product.
Products with wireless LAN devices or HP Mobile Broadband Modules
This device must not be co-located or operating in conjunction with any other antenna or transmitter.
WARNING!
Exposure to Radio Frequency Radiation The radiated output power of this device is below the FCC radio frequency exposure limits. Nevertheless, the device should be used in such a manner that the potential for human contact is minimized during normal operation of tablet PCs and notebook computers.
During normal operation of tablet PCs and notebook computers with displays equal to or less than
30.5 cm (12 inches): To avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antennas should not be less than 2.5 cm (1 inch). To identify the location of the wireless antennas, refer to the computer user guides included with your computer.
During normal operation of notebook computers with displays greater than 30.5 cm (12 inches): To avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antennas should not be less than 20 cm (8 inches), including when the computer display is closed. To identify the location of the wireless antennas, refer to the computer user guides included with your computer.
CAUTION: When using IEEE 802.11a wireless LAN, this product is restricted to indoor use, due to its operation in the 5.15- to 5.25-GHz frequency range. The FCC requires this product to be used indoors for the frequency range of 5.15 GHz to 5.25 GHz to reduce the potential for harmful interference to co-channel mobile satellite systems. High-power radar is allocated as the primary user of the 5.25- to 5.35-GHz and 5.65- to 5.85-GHz bands. These radar stations can cause interference with and/or damage to this device.
Federal Communications Commission notice 3
Brazil notice
Este equipamento opera em caráter secundário, isto é, não tem direito a proteção contra interferência prejudicial, mesmo de estações do mesmo tipo, e não pode causar interferência a sistemas operando em caráter primário.
Este equipamento atende aos limites de Taxa de Absorção Específica referente à exposição a campos elétricos, magnéticos e eletromagnéticos de radiofreqüências adotados pela ANATEL.
Canada notices
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing
Equipment Regulations, CAN ICES-3(B)/NMB-3(B). If this device has WLAN or Bluetooth capability, the device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
WARNING!
Exposure to Radio Frequency Radiation: The radiated output power of this device is below the Industry Canada radio frequency exposure limits. Nevertheless, the device should be used in such a manner that the potential for human contact is minimized during normal operation.
During normal operation of tablet PCs and notebook computers with displays equal to or less than
30.5 cm (12 inches): To avoid the possibility of exceeding the Industry Canada radio frequency exposure limits, human proximity to the antennas should not be less than 2.5 cm (1 inch). To identify the location of the wireless antennas, refer to the computer user guides included with your computer.
During normal operation of notebook computers with displays greater than 30.5 cm (12 inches): To avoid the possibility of exceeding the Industry Canada radio frequency exposure limits, human proximity to the antennas should not be less than 20 cm (8 inches), including when the computer display is closed. To identify the location of the wireless antennas, refer to the computer user guides included with your computer.
CAUTION: When using IEEE 802.11a wireless LAN, this product is restricted to indoor use, due to its operation in the 5.15- to 5.25-GHz frequency range. Industry Canada requires this product to be used indoors for the frequency range of 5.15 GHz to 5.25 GHz to reduce the potential for harmful interference to co-channel mobile satellite systems. High-power radar is allocated as the primary user of the 5.25- to 5.35-GHz and 5.65- to 5.85-GHz bands. These radar stations can cause interference with and/or damage to this device.
The antennas for this device are not replaceable. Any attempt at user access will damage your computer.
European Union regulatory notices
Declaration of Conformity
Products bearing the CE marking comply with one or more of the following EU Directives as may be applicable:
Low Voltage Directive 2006/95/EC; EMC Directive 2004/108/EC; Ecodesign Directive 2009/125/EC;
R&TTE Directive 1999/5/EC; RoHS Directive 2011/65/EU
4 Chapter 1 Regulatory notices for notebook computers
Compliance with these directives is assessed using applicable European Harmonised Standards.
The full Declaration of Conformity can be found at the following web site: www.hp.eu/certificates
(Search with the product model name or its Regulatory Model Number (RMN), which may be found on the regulatory label.)
The point of contact for regulatory matters is Hewlett-Packard GmbH, Dept./MS:HQ-TRE,
Herrenberger Strasse 140, 71034 Boeblingen, GERMANY.
Products with wireless functionality (EMF)
This product meets international guidelines (ICNIRP) for exposure to radio frequency radiation.
This product incorporates a radio transmitting and receiving device. For notebook computers in normal use, a separation distance of 20 cm ensures that radio frequency exposure levels comply with
EU requirements. Products designed to be operated at closer proximities, such as tablet computers, comply with applicable EU requirements in typical operating positions, but a minimum distance of 1 cm should be maintained from the antennas.
Restrictions for product with wireless functionality
This product is designed for use without restrictions in all EU countries, plus Iceland, Liechtenstein,
Norway, and Switzerland.
European telephone network declaration (Modem/Fax)
The product herewith complies with the requirements of the R&TTE Directive 1999/5/EC (Annex II) and carries the CE marking accordingly. However, due to differences between the individual PSTNs provided in different countries/regions, the approval does not, of itself, give an unconditional assurance of successful operation on every PSTN network termination point. In the event of problems, you should contact your equipment supplier in the first instance.
Ergonomics notice
Germany (English text)
When a mobile computer is used at the office workstation for display work tasks where the Visual
Display Unit (VDU) Directive 90/270/EEC is applicable, an adequate external keyboard is required.
Depending on the application and task, an adequate external monitor may also be necessary to attain working conditions comparable to a workstation setup.
Ref: EK1-ITB 2000 (voluntary GS certification)
Mobile computers bearing the "GS" approval mark meet the applicable ergonomic requirements.
Without external keyboards, they are suitable only for short-time use of VDU tasks.
During mobile use with disadvantageous illumination conditions (e.g. direct sun light) reflections may occur, which result in reduced readability.
Germany (Deutscher text)
Wird ein mobiler Computer für Bildschirmarbeitsaufgaben verwendet, wo die Richtlinie 90/270/EEG
(Bildschirmarbeitsrichtlinie) anzuwenden ist, wird eine geeignete externe Tastatur notwendig.
Abhängig von der Anwendung und der Aufgabe kann ein geeigneter externer Monitor erforderlich sein, um vergleichbare Arbeitsbedingungen zu einem stationären Arbeitsplatz zu erreichen.
Ref: EK1-ITB 2000 (freiwillige GS Zertifizierung)
European Union regulatory notices 5
Mobile Computer, welche das "GS" Zeichen tragen, entsprechen den ergonomischen Anforderungen und sind nur für kurzzeitige Benutzung von Bildschirmarbeitsaufgaben geeignet.
Bei mobiler Nutzung mit ungünstigen Lichtverhältnissen (z.B. direkte Sonneneinstrahlung) kann es zu
Reflexionen und damit zu Einschränkungen der Lesbarkeit der dargestellten Zeichen kommen.
Australia and New Zealand notice
This equipment incorporates a radio transmitting and receiving device. In normal use, a separation distance of 20 cm ensures that radio frequency exposure levels comply with the Australian and New
Zealand Standards.
Japan notices
6 Chapter 1 Regulatory notices for notebook computers
Wireless LAN, Wireless WAN, and Bluetooth certification markings
この製品には、認証済みの無線機器を搭載しています。
This product contains certified radio equipment.
South Korea notices
Mexico notice
Declaración para México
La operación de este equipo está sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operación no deseada.
If your product is provided with wireless accessories such as a keyboard or mouse and you need to identify the model of the accessory, refer to the label included on that accessory.
Singapore wireless notice
Turn off any WWAN devices while you are onboard aircraft. The use of these devices onboard aircraft is illegal, may be dangerous to the operation of the aircraft, and may disrupt the cellular network.
Failure to observe this instruction may lead to suspension or denial of cellular services to the offender, or legal action, or both.
Users are reminded to restrict the use of radio equipment in fuel depots, chemical plants, and where blasting operations are in progress.
As with other mobile radio transmitting equipment, users are advised that for satisfactory operation of the equipment and for the safety of personnel, no part of the human body should be allowed to come too close to the antennas during operation of the equipment.
South Korea notices 7
This device has been designed to comply with applicable requirements for exposure to radio waves, based on scientific guidelines that include margins intended to assure the safety of all people, regardless of health and age. These radio wave exposure guidelines employ a unit of measurement known as the specific absorption rate (SAR). Tests for SAR are conducted using standardized methods, with the phone transmitting at its highest certified power level in all used frequency bands.
The SAR data information is based on CENELEC's standards EN50360 and EN50361, which use the limit of 2 watts per kilogram, averaged over 10 grams of tissue.
Thailand WWAN wireless notice
This telecom equipment has complied with NTC regulations.
Taiwan NCC notices
Wireless LAN 802.11a devices
Wireless LAN 802.11 devices/Bluetooth devices/Short range devices
8 Chapter 1 Regulatory notices for notebook computers
Airline travel notice
Use of electronic equipment onboard commercial aircraft is at the discretion of the airline.
User-replaceable battery notices
When a battery has reached the end of its useful life, do not dispose of the battery in general in household waste. Follow the local laws and regulations in your area for computer battery disposal.
HP encourages customers to recycle used electronic hardware, HP original print cartridges, and rechargeable batteries. For more information about recycling programs, refer to the HP Web site at http://www.hp.com/recycle .
For information about removing a user-replaceable battery, refer to the user guide included with the product.
Factory-sealed battery notices
The battery[ies] in this product cannot be easily replaced by users themselves. Removing or replacing the battery could affect your warranty coverage. If a battery is no longer holding a charge, contact support.
When a battery has reached the end of its useful life, do not dispose of the battery in general household waste. Follow the local laws and regulations in your area for battery disposal.
ENERGY STAR ® compliance
As an ENERGY STAR Partner, Hewlett-Packard Company has followed the EPA’s enhanced product qualification and certification process to ensure that the products marked with the ENERGY STAR logo are ENERGY STAR qualified per the applicable ENERGY STAR guidelines for energy efficiency. The following logo appears on all ENERGY STAR-qualified computers:
The ENERGY STAR program for computers was created by the EPA to promote energy efficiency and reduce air pollution through more energy-efficient equipment in homes, offices, and factories.
One way that products achieve this goal is by using the Microsoft® Windows® power management feature to reduce power consumption when the product is not in use.
The power management feature allows the computer to initiate a low-power or “Sleep” mode after a period of user inactivity. When used with an external ENERGY STAR qualified monitor, this feature also supports similar power management features of the monitor. To take advantage of these potential energy savings, the power management feature has been preset to behave in the following ways when the system is operating on AC power:
● Turn off the display after <= 15 minutes (varies by model)
● Initiate Sleep after <= 30 minutes (varies by model)
The computer exits Sleep when the power/Sleep button is pressed. When the Wake On LAN (WOL) feature is enabled, the computer can also exit Sleep in response to a network signal.
Additional information on the potential energy and financial savings of the power management feature can be found on the EPA ENERGY STAR Power Management Web site at http://www.energystar.gov/powermanagement .
Airline travel notice 9
Additional information on the ENERGY STAR program and its environmental benefits are available on the EPA ENERGY STAR Web site at http://www.energystar.gov
.
Laser compliance
WARNING!
Use of controls or adjustments, or performance of procedures other than those specified in the laser product installation guide, may result in hazardous radiation exposure. To reduce the risk of exposure to hazardous radiation:
● Do not try to open the module enclosure. There are no user-serviceable components inside.
● Do not operate controls, make adjustments, or perform procedures to the laser device other than those specified in the laser product installation guide.
● Allow only authorized service providers to repair the unit.
This product may be provided with an optical storage device (for example, a CD or DVD drive) and/or a fiber optic transceiver. Each of these devices that contain a laser is classified as a Class 1 Laser
Product in accordance with IEC/EN 60825-1 and meets the requirements for safety of that standard.
Each laser product complies with US FDA regulations of 21 CFR 1040.10 and 1040.11 or complies with those regulations except for deviations pursuant to Laser Notice No. 50 dated June 24, 2007.
Modem notices
WARNING!
To reduce the risk of fire, electric shock, and injury to persons when using this device, always follow basic safety precautions, including the following:
● Do not use this product near water—for example, near a bathtub, wash bowl, kitchen sink or laundry tub, in a wet basement, or near a swimming pool.
● Avoid using this product during an electrical storm. There is a remote risk of electric shock from lightning.
● Do not use this product to report a gas leak while in the vicinity of the leak.
● Always disconnect the modem cable before opening the equipment enclosure or touching an uninsulated modem cable, jack, or internal component.
● If this product was not provided with a telephone line cord, use only No. 26 AWG or larger telecommunication line cord.
● Do not plug a modem or telephone cable into the RJ-45 (network) jack.
SAVE THESE INSTRUCTIONS.
Telecommunications device approvals
The telecommunications device in the computer is approved for connection to the telephone network in the countries and regions whose approval markings are indicated on the product label located on the bottom of the computer or on the modem.
Refer to the user guide included with the product to ensure that the product is configured for the country or region in which the product is located. Selecting a country or region other than the one in which it is located may cause the modem to be configured in a way that violates the telecommunication regulations/laws of that country or region. In addition, the modem may not function properly if the correct country or region selection is not made. If, when you select a country or region, a message appears that states that the country or region is not supported, this means that the modem has not been approved for use in this country or region and thus should not be used.
10 Chapter 1 Regulatory notices for notebook computers
U.S. modem statements
This equipment complies with Part 68 of the FCC Rules and the requirements adopted by the ACTA.
On the bottom of the computer or on the modem is a label that contains, among other information, a product identifier in the format US:AAAEQ##TXXXX. Provide this information to the telephone company if you are requested to do so.
Applicable certification jack USOC = RJ11C. A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. See installation instructions for details.
The REN is used to determine the number of devices that may be connected to a telephone line.
Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most but not all locations, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact the local telephone company. For products approved after July 23, 2001, the REN for this product is part of the product identifier that has the format US:AAAEQ##TXXXX. The digits represented by ## are the REN without a decimal point (e.g., 03 is a REN of 0.3). For earlier products, the REN is separately shown on the label.
If this HP equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. But, if advance notice isn't practical, the telephone company will notify you as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary.
The telephone company may make changes to its facilities, equipment, operations, or procedures that could affect the operation of the equipment. If this happens, the telephone company will provide advance notice in order for you to make necessary modifications to maintain uninterrupted telephone service.
If trouble is experienced with this equipment, call technical support. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved. You should perform repairs only to the equipment specifically discussed in the “Troubleshooting” section of the user guide, if one is provided.
Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service commission, or corporation commission for information.
If your home has specially wired alarm equipment connected to the telephone line, ensure that the installation of this HP equipment does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer.
The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device, including a fax machine, to send any message unless such message clearly contains in a margin at the top or bottom of each transmitted page, or on the first page of the transmission, the date and time it is sent and an identification of the business, other entity, or other individual sending the message, and the telephone number of the sending machine or such business, other entity, or individual. (The telephone number provided may not be a 900 number or any other number for which charges exceed local or long-distance transmission charges).
In order to program this information into your fax machine, you should complete the steps outlined in the faxing software instructions.
Modem notices 11
U.S. modem declarations
Refer to the following modem vendor declarations for the modem device installed in your computer:
12 Chapter 1 Regulatory notices for notebook computers
Canada modem statements
This equipment meets the applicable Industry Canada technical specifications.
The Ringer Equivalence Number, REN, is an indication of the maximum number of devices allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices, subject only to the requirement that the sum of the RENs of all devices does not exceed 5. The REN for this terminal equipment is 1.0.
Japan modem statements
If the computer does not have the Japanese certification mark on the bottom of the computer, refer to the appropriate certification marking below.
The Japanese certification mark for the V.92 56K Data/Fax Modem is below:
New Zealand modem statements
The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted that the item complies with minimum conditions for connection to its network. It indicates no endorsement of the product by Telecom, nor does it provide any sort of warranty. Above all, it provides no assurance that any item will work correctly in all respects with another item of
Telepermitted equipment of a different make or model, nor does it imply that any product is compatible with all of Telecom's network services.
This equipment is not capable, under all operating conditions, of correct operation at the higher speeds for which it is designed. Telecom will accept no responsibility should difficulties arise in such circumstances.
If this device is equipped with pulse dialing, note that there is no guarantee that Telecom lines will always continue to support pulse dialing.
Use of pulse dialing, when this equipment is connected to the same line as other equipment, may give rise to bell tinkle or noise and may also cause a false answer condition. Should such problems occur, the user should not contact the Telecom Faults Service.
Some parameters required for compliance with Telecom's Telepermit requirements are dependent on the equipment (PC) associated with this device. The associated equipment shall be set to operate within the following limits for compliance with Telecom's Specifications: a.
There shall be no more than 10 call attempts to the same number within any 30-minute period for any single manual call initiation.
b.
The equipment shall go on-hook for a period of not less than 30 seconds between the end of one attempt and the beginning of the next attempt.
c.
Where automatic calls are made to different numbers, the equipment shall be set to go on-hook for a period of not less than 5 seconds between the end of one attempt and the beginning of the next attempt.
d.
The equipment shall be set to ensure that calls are answered between 3 and 30 seconds of receipt of ringing (So set between 2 and 10).
Modem notices 13
Voice support
All persons using this device for recording telephone conversations shall comply with New Zealand law. This requires that at least one party to the conversation is aware that it is being recorded. In addition, the Principles enumerated in the Privacy Act 1993 shall be complied with in respect to the nature of the personal information collected, the purpose for its collection, how it is to be used, and what is disclosed to any other party.
This equipment shall not be set to make automatic calls to the Telecom ‘111' Emergency Service.
Power cord notice
If you were not provided with a power cord for the computer or for an external power accessory intended for use with the computer, you should purchase a power cord that is approved for use in your country or region.
The power cord must be rated for the product and for the voltage and current marked on the product's electrical ratings label. The voltage and current rating of the cord should be greater than the voltage and current rating marked on the product. In addition, the diameter of the wire must be a minimum of
0.75 mm²/18AWG, and the length of the cord must be between 1.0 m (3.2 ft) and 2 m (6.56 ft). If you have questions about the type of power cord to use, contact your authorized service provider.
A power cord should be routed so that it is not likely to be walked on or pinched by items placed upon it or against it. Particular attention should be paid to the plug, electrical outlet, and the point where the cord exits from the product.
Japan power cord notice
DC plug of external HP power supply
Macrovision Corporation notice
This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision
Corporation and is intended for home and other limited viewing uses only, unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.
14 Chapter 1 Regulatory notices for notebook computers
2 Regulatory notices for desktops, thin clients and personal workstations
Modem notices
WARNING!
To reduce the risk of fire, electric shock, and injury to persons when using this device, always follow basic safety precautions, including the following:
● Do not use this product near water—for example, near a bathtub, wash bowl, kitchen sink or laundry tub, in a wet basement, or near a swimming pool.
● Avoid using this product during an electrical storm. There is a remote risk of electric shock from lightning.
● Do not use this product to report a gas leak while in the vicinity of the leak.
● Always disconnect the modem cable before opening the equipment enclosure or touching an uninsulated modem cable, jack, or internal component.
● If this product was not provided with a telephone line cord, use only No. 26 AWG or larger telecommunication line cord.
● Do not plug a modem or telephone cable into the RJ-45 (Ethernet network) jack.
SAVE THESE INSTRUCTIONS.
Telecommunications device approvals
The telecommunications device in the computer is approved for connection to the telephone network in the countries and regions whose approval markings are indicated on the product label located on the bottom of the computer or on the modem.
Refer to the user guide included with the product to ensure that the product is configured for the country or region in which the product is located. Selecting a country or region other than the one in which it is located may cause the modem to be configured in a way that violates the telecommunication regulations/laws of that country or region. In addition, the modem may not function properly if the correct country or region selection is not made. If, when you select a country or region, a message appears that states that the country or region is not supported, this means that the modem has not been approved for use in this country or region and thus should not be used.
U.S. modem statements
This equipment complies with Part 68 of the FCC Rules and the requirements adopted by the ACTA.
On the bottom of the computer or on the modem is a label that contains, among other information, a product identifier in the format US:AAAEQ##TXXXX. Provide this information to the telephone company if you are requested to do so.
Applicable certification jack USOC = RJ11C. A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected to a compatible modular jack that is also compliant. See installation instructions for details.
Modem notices 15
The REN is used to determine the number of devices that may be connected to a telephone line.
Excessive RENs on a telephone line may result in the devices not ringing in response to an incoming call. In most but not all locations, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact the local telephone company. For products approved after July 23, 2001, the REN for this product is part of the product identifier that has the format US:AAAEQ##TXXXX. The digits represented by ## are the REN without a decimal point (e.g., 03 is a REN of 0.3). For earlier products, the REN is separately shown on the label.
If this HP equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. But, if advance notice isn't practical, the telephone company will notify you as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary.
The telephone company may make changes to its facilities, equipment, operations, or procedures that could affect the operation of the equipment. If this happens, the telephone company will provide advance notice in order for you to make necessary modifications to maintain uninterrupted telephone service.
If trouble is experienced with this equipment, call technical support. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved. You should perform repairs only to the equipment specifically discussed in the “Troubleshooting” section of the user guide, if one is provided.
Connection to party line service is subject to state tariffs. Contact the state public utility commission, public service commission, or corporation commission for information.
If your home has specially wired alarm equipment connected to the telephone line, ensure that the installation of this HP equipment does not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone company or a qualified installer.
The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device, including a fax machine, to send any message unless such message clearly contains in a margin at the top or bottom of each transmitted page, or on the first page of the transmission, the date and time it is sent and an identification of the business, other entity, or other individual sending the message, and the telephone number of the sending machine or such business, other entity, or individual. (The telephone number provided may not be a 900 number or any other number for which charges exceed local or long-distance transmission charges).
In order to program this information into your fax machine, you should complete the steps outlined in the faxing software instructions.
Canadian modem statements
This equipment meets the applicable Industry Canada technical specifications.
The Ringer Equivalence Number, REN, is an indication of the maximum number of devices allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices, subject only to the requirement that the sum of the RENs of all devices does not exceed 5. The REN for this terminal equipment is 1.0.
16 Chapter 2 Regulatory notices for desktops, thin clients and personal workstations
Japanese modem statements
If the computer does not have the Japanese certification mark on the bottom of the computer, refer to the appropriate certification marking below.
The Japanese certification mark for the LSI Corporation PCI-SV92EX Soft modem is below:
New Zealand modem statements
The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted that the item complies with minimum conditions for connection to its network. It indicates no endorsement of the product by Telecom, nor does it provide any sort of warranty. Above all, it provides no assurance that any item will work correctly in all respects with another item of
Telepermitted equipment of a different make or model, nor does it imply that any product is compatible with all of Telecom's network services.
This equipment is not capable, under all operating conditions, of correct operation at the higher speeds for which it is designed. Telecom will accept no responsibility should difficulties arise in such circumstances.
If this device is equipped with pulse dialing, note that there is no guarantee that Telecom lines will always continue to support pulse dialing.
Use of pulse dialing, when this equipment is connected to the same line as other equipment, may give rise to bell tinkle or noise and may also cause a false answer condition. Should such problems occur, the user should not contact the Telecom Faults Service.
Some parameters required for compliance with Telecom's Telepermit requirements are dependent on the equipment (PC) associated with this device. The associated equipment shall be set to operate within the following limits for compliance with Telecom's Specifications: a.
There shall be no more than 10 call attempts to the same number within any 30-minute period for any single manual call initiation.
b.
The equipment shall go on-hook for a period of not less than 30 seconds between the end of one attempt and the beginning of the next attempt.
c.
Where automatic calls are made to different numbers, the equipment shall be set to go on-hook for a period of not less than 5 seconds between the end of one attempt and the beginning of the next attempt.
d.
The equipment shall be set to ensure that calls are answered between 3 and 30 seconds of receipt of ringing (So set between 2 and 10).
Voice support
All persons using this device for recording telephone conversations shall comply with New Zealand law. This requires that at least one party to the conversation is aware that it is being recorded. In addition, the Principles enumerated in the Privacy Act 1993 shall be complied with in respect to the nature of the personal information collected, the purpose for its collection, how it is to be used, and what is disclosed to any other party.
This equipment shall not be set to make automatic calls to the Telecom ‘111' Emergency Service.
Modem notices 17
Electromagnetic compatibility notices
This guide provides country- and region-specific nonwireless and wireless regulatory notices and compliance information for the computer product. Some of these notices may not apply to your product.
One or more integrated wireless devices may be installed. In some environments, the use of wireless devices may be restricted. Such restrictions may apply onboard airplanes, in hospitals, near explosives, in hazardous locations, and so on. If you are uncertain of the policy that applies to the use of this product, ask for authorization to use it before you turn it on.
Federal Communications Commission notice
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
● Reorient or relocate the receiving antenna.
● Increase the separation between the equipment and the receiver.
● Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
● Consult the dealer or an experienced radio or television technician for help.
Modifications
The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by Hewlett-Packard Company may void the user's authority to operate the equipment.
Cables
Connections to this device must be made with shielded cables with metallic RFI/EMI connector hoods in order to maintain compliance with FCC Rules and Regulations.
18 Chapter 2 Regulatory notices for desktops, thin clients and personal workstations
Declaration of conformity for products marked with the FCC logo (United States only)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1.
This device may not cause harmful interference, and
2.
This device must accept any interference received, including interference that may cause undesired operation.
For questions regarding the product, contact:
Hewlett-Packard Company P.O. Box 692000, Mail Stop 530113 Houston, Texas 77269-2000
For questions regarding this FCC declaration, contact:
Hewlett-Packard Company P.O. Box 692000, Mail Stop 510101 Houston, Texas 77269-2000
Or, call (281) 514-3333.
To identify this product, refer to the part, series, or model number found on the product.
Products with wireless LAN devices
This product may be equipped with a wireless LAN device. This device must not be co-located or operating in conjunction with any other antenna or transmitter.
WARNING!
Exposure to Radio Frequency Radiation The radiated output power of this device is below the FCC radio frequency exposure limits. Nevertheless, the device should be used in such a manner that the potential for human contact is minimized during normal operation.
During normal operation: To avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antennae should not be less than 20 cm (8 inches). To identify the location of the wireless antennae, refer to the documentation included with the computer.
CAUTION: When using IEEE 802.11a wireless LAN, this product is restricted to indoor use, due to its operation in the 5.15- to 5.25-GHz frequency range. The FCC requires this product to be used indoors for the frequency range of 5.15 GHz to 5.25 GHz to reduce the potential for harmful interference to cochannel mobile satellite systems. High-power radar is allocated as the primary user of the 5.25- to 5.35-GHz and 5.65- to 5.85-GHz bands. These radar stations can cause interference with and/or damage to this device.
Australia telecom statement
The computer must be connected to the Telecommunication Network through a line cord that meets the requirements of AS/CA S008.
WARNING!
Modems without integral RJ11 connector that are shipped with this computer should not be installed in any other device.
This equipment incorporates a radio transmitting and receiving device. In normal use, a separation distance of 20 cm ensures that radio frequency exposure levels comply with the Australian and New
Zealand Standards.
Electromagnetic compatibility notices 19
Brazil notice
Este equipamento opera em caráter secundário, isto é, não tem direito a proteção contra interferência prejudicial, mesmo de estações do mesmo tipo, e não pode causar interferência a sistemas operando em caráter primário.
CAUTION: A alimentação de energia é predefinida para 220/230Vv. Se você possuir tomada elétrica de 110/115Vv, por favor, altere a chave na parte traseira do seu computador para a tensão correta.
Canadian notice
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing
Equipment Regulations, CAN ICES-3(B)/NMB-3(B). If this device has WLAN or Bluetooth capability, this device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
WARNING!
Exposure to Radio Frequency Radiation The radiated output power of this device is below the Industry Canada radio frequency exposure limits. Nevertheless, the device should be used in such a manner that the potential for human contact is minimized during normal operation.
During normal operation: To avoid the possibility of exceeding the Industry Canada radio frequency exposure limits, human proximity to the antennae should not be less than 20 cm (8 inches). To identify the location of the wireless antennae, refer to the documentation included with the computer.
CAUTION: When using IEEE 802.11a wireless LAN, this product is restricted to indoor use, due to its operation in the 5.15- to 5.25-GHz frequency range. Industry Canada requires this product to be used indoors for the frequency range of 5.15 GHz to 5.25 GHz to reduce the potential for harmful interference to co-channel mobile satellite systems. High-power radar is allocated as the primary user of the 5.25- to 5.35-GHz and 5.65- to 5.85-GHz bands. These radar stations can cause interference with and/or damage to this device.
The antenna for this device is not replaceable. Any attempt at user modification may damage your computer.
European Union regulatory notices
Declaration of Conformity
Products bearing the CE marking comply with one or more of the following EU Directives as may be applicable:
Low Voltage Directive 2006/95/EC; EMC Directive 2004/108/EC; Ecodesign Directive 2009/125/EC;
R&TTE Directive 1999/5/EC; RoHS Directive 2011/65/EU
Compliance with these directives is assessed using applicable European Harmonised Standards.
The full Declaration of Conformity can be found at the following web site: www.hp.eu/certificates
(Search with the product model name or its Regulatory Model Number (RMN), which may be found on the regulatory label.)
The point of contact for regulatory matters is Hewlett-Packard GmbH, Dept./MS:HQ-TRE,
Herrenberger Strasse 140, 71034 Boeblingen, GERMANY.
20 Chapter 2 Regulatory notices for desktops, thin clients and personal workstations
Products with wireless functionality (EMF)
This product meets international guidelines (ICNIRP) for exposure to radio frequency radiation.
This product may incorporate a radio transmitting and receiving device. For desktop computers in normal use, a separation distance of 20 cm ensures that radio frequency exposure levels comply with
EU requirements.
Restrictions for product with wireless functionality
This product is designed for use without restrictions in all EU countries, plus Iceland, Liechtenstein,
Norway, and Switzerland.
European telephone network declaration (Modem/Fax)
The product herewith complies with the requirements of the R&TTE Directive 1999/5/EC (Annex II) and carries the CE marking accordingly. However, due to differences between the individual PSTNs provided in different countries/regions, the approval does not, of itself, give an unconditional assurance of successful operation on every PSTN network termination point. In the event of problems, you should contact your equipment supplier in the first instance.
This equipment has been designed to work with analogue DTMF Networks. This equipment may have internetworking difficulties in PSTN networks that only support Pulse Dialing. Please consult with your network operator for further assistance.
Ergonomics notice
Germany (English text)
A computer system comprising HP brand products meets the applicable German ergonomic requirements if all affected constituent products bear the "GS" approval mark, for example Business
Desktop PC, keyboard, PC-mouse and monitor.
Germany (Deutscher text)
Ein aus HP Produkten bestehendes Computersystem erfüllt die anwendbaren ergonomischen
Anforderungen, wenn alle verwendeten Komponenten das „GS“ Zeichen tragen, wie z. B. Business
Desktop PC, Tastatur, PC-Maus und Bildschirm.
Electromagnetic compatibility notices 21
Japan notice
この装置は、クラス B 情報技術装置です。この装置は、家 庭環境で使用することを目的としています
が、この装置が ラジオやテレビジョン受信機に近接して使用されると、受 信障害を引き起こすこと
があります。取扱説明書に従って 正しい取り扱いをして下さい。
VCCI-B
Wireless LAN and Bluetooth certification markings
このデバイスに無線装置が搭載されている場合、それは認定された無線装置です。
If this device contains radio equipment, it is certified radio equipment.
South Korea notices
이 장비는 무선장비 안테나와 사용자의 최소거리가 20cm 를 유지한 상태로 설치되고 운영되야 합니
다.
22 Chapter 2 Regulatory notices for desktops, thin clients and personal workstations
This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and personnel.
Mexico notice
Declaración para México
La operación de este equipo está sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operación no deseada.
If your product is provided with wireless accessories such as a keyboard or mouse and you need to identify the model of the accessory, refer to the label included on that accessory.
Taiwan NCC notices
Wireless LAN 802.11a devices
Wireless LAN 802.11 devices/Bluetooth devices/Short range devices
Electromagnetic compatibility notices 23
3 Safety notices for notebook computers
WARNING!
To reduce the risk of serious injury, read the Safety & Comfort Guide. It describes proper workstation setup, posture, and health and work habits for computer users, and provides important electrical and mechanical safety information. This guide is located on the Web at http://www.hp.com/ergo and on the Documentation CD that is included with the product.
Heat-related safety warning notice
WARNING!
To reduce the possibility of heat-related injuries or of overheating the computer, do not place the computer directly on your lap or obstruct the computer air vents. Use the computer only on a hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft surface, such as pillows or rugs or clothing, to block airflow. Also, do not allow the AC adapter to contact the skin or a soft surface, such as pillows or rugs or clothing, during operation. The computer and the AC adapter comply with the user-accessible surface temperature limits defined by the
International Standard for Safety of Information Technology Equipment (IEC/EN 60950).
Potential safety conditions notice
If you notice any of the following conditions (or if you have other safety concerns), do not use the computer: crackling, hissing, or popping sound, or a strong odor or smoke coming from the computer.
It is normal for these conditions to appear when an internal electronic component fails in a safe and controlled manner. However, these conditions may also indicate a potential safety issue. Do not assume it is a safe failure. Turn off the computer, disconnect it from its power source, and contact technical support for assistance.
User-replaceable battery notices
WARNING!
Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions.
WARNING!
To reduce the risk of fire or burns, do not disassemble, crush, or puncture; do not short external contacts; do not dispose of in fire or water.
WARNING!
Keep the battery away from children.
WARNING!
To reduce potential safety issues, only the battery provided with the computer, a replacement battery provided by HP, or a compatible battery purchased as an accessory from HP should be used with the computer.
24 Chapter 3 Safety notices for notebook computers
Headset and earphone volume level notice
WARNING!
Listening to music at high volume levels and for extended durations can damage one’s hearing. To reduce the risk of hearing damage, lower the volume to a safe, comfortable level and reduce the amount of time listening at high levels.
For your own safety, before using headsets or earphones, always reset the volume. Some headphones are louder than other headphones, even if the volume control setting is the same.
Changing the default audio or equalizer settings might lead to higher volume and should only be done with caution.
For your own safety, headsets or earphones used with this product should comply with the headphone limits in EN 50332-2.
If the computer includes a headset or earphones, this combination is in compliance to EN 50332-1.
Power cord notices
WARNING!
To reduce the risk of electric shock or damage to the equipment:
● Plug the power cord into an AC outlet that is easily accessible at all times.
● Disconnect power from the computer by unplugging the power cord from the AC outlet.
● If provided with a 3-pin attachment plug on the power cord, plug the cord into a grounded
(earthed) 3-pin outlet. Do not disable the power cord grounding pin, for example, by attaching a
2-pin adapter. The grounding pin is an important safety feature.
WARNING!
To reduce potential safety issues, only the AC adapter provided with the computer, a replacement AC adapter provided by HP, or an AC adapter purchased as an accessory from HP should be used with the computer.
Brazil notice
Este equipamento deve ser conectado obrigatoriamente em tomada de rede de energia elétrica que possua aterramento (três pinos), conforme a norma nbr abnt 5410,visando a segurança dos usuários contra choques elétricos.
Cleaning the keyboard
WARNING!
To reduce the risk of electric shock or damage to internal components, do not use a vacuum cleaner attachment to clean the keyboard. A vacuum cleaner can deposit household debris on the keyboard surface. Clean the keyboard regularly to prevent keys from sticking and to remove dust, lint, and particles that can become trapped beneath the keys. A can of compressed air with a straw extension can be used to blow air around and under the keys to loosen and remove debris.
Travel notice
WARNING!
To reduce the risk of electric shock, fire, or damage to the equipment, do not attempt to power the computer with a voltage converter kit sold for appliances.
Headset and earphone volume level notice 25
China safety notices
China: Altitude notice
Altitude warning for products not certified for use in >5000 m
仅适用于海拔 2000m 以下地区安全使用
– or –
仅适用于海拔 2000 米以下地区安全使用
China: Tropical warning notice
Tropical warning for products not certified for use in tropical regions.
仅适用于非热带气候条件下安全使用
Norway and Sweden: Cable grounding notice for products with a TV tuner
CAUTION: To reduce potential safety issues, use a galvanic isolator when connecting to a cable distribution system.
26 Chapter 3 Safety notices for notebook computers
4 Safety notices for desktops, thin clients and personal workstations
Important safety information
WARNING!
To reduce the risk of serious injury, read the Safety & Comfort Guide. It describes proper workstation setup, posture, and health and work habits for computer users, and provides important electrical and mechanical safety information. This guide is located on the Web at http://www.hp.com/ergo and on the Documentation CD that is included with the product.
To reduce the risk of electric shock or damage to the equipment:
● Plug the power cord into an AC outlet that is easily accessible at all times.
● Disconnect power from the computer by unplugging the power cord from the AC outlet.
● If provided with a 3-pin attachment plug on the power cord, plug the cord into a grounded
(earthed) 3-pin outlet. Do not disable the power cord grounding pin, for example, by attaching a
2-pin adapter. The grounding pin is an important safety feature.
The computer may be heavy; be sure to use ergonomically correct lifting procedures when moving it.
Install the computer near an AC outlet. The AC power cord is your computer’s main AC disconnecting device and must be easily accessible at all times. For your safety, the power cord provided with your computer has a grounded plug. Always use the power cord with a properly grounded wall outlet, to avoid the risk of electrical shock.
To reduce the possibility of an electric shock from the telephone network, plug your computer into the
AC outlet before connecting it to the telephone line. Also, disconnect the telephone line before unplugging your computer from the AC power outlet.
Always disconnect the modem cord from the telephone system before installing or removing your computer cover.
Do not operate the computer with the cover removed.
For your safety, always unplug the computer from its power source and from any telecommunications systems (such as telephone lines), networks, or modems before performing any service procedures.
Failure to do so may result in personal injury or equipment damage. Hazardous voltage levels are inside the power supply and modem of this product.
CAUTION: If your computer is provided with a voltage select switch for use in a 115 or 230 V power system, the voltage select switch has been pre-set to the correct voltage setting for use in the particular country/region where it was initially sold. Changing the voltage select switch to the incorrect position can damage your computer and void any implied warranty.
This product has not been evaluated for connection to an “IT” power system (an AC distribution system with no direct connection to earth, according to IEC/EN 60950).
Installation conditions
See installation instructions before connecting this equipment to the input supply.
Important safety information 27
WARNING!
The equipment must be provided with a proper AC protective earth (PE) ground connection.
Energized and moving parts may be inside the computer. Disconnect power to the equipment before removing the enclosure. Replace and secure the enclosure before re-energizing the equipment.
Battery replacement notice
WARNING!
The product may contain an internal lithium manganese dioxide, vanadium pentoxide, or alkaline battery or battery pack. There is risk of fire and burns if the battery pack is not handled properly. To reduce the risk of personal injury:
● Do not attempt to recharge the battery.
● Do not expose to temperatures higher than 60° C (140° F).
● Do not disassemble, crush, puncture, short external contacts, or dispose of in fire or water.
● Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions.
● Replace only with the HP spare designated for this product.
For information about removing a battery, refer to your computer documentation.
Batteries, battery packs, and accumulators should not be disposed of together with the general household waste. In order to forward them to recycling or proper disposal, please use the public collection system or return them to HP, an authorized HP partner, or their agents.
The Taiwan EPA requires dry battery manufacturing or importing firms, in accordance with Article 15 of the Waste Disposal Act, to indicate the recovery marks on the batteries used in sales, giveaways, or promotions. Contact a qualified Taiwanese recycler for proper battery disposal.
Headset and earphone volume level notice
WARNING!
Listening to music at high volume levels and for extended durations can damage one’s hearing. To reduce the risk of hearing damage, lower the volume to a safe, comfortable level and reduce the amount of time listening at high levels.
For your own safety, before using headsets or earphones, always reset the volume. Some headphones are louder than other headphones, even if the volume control setting is the same.
Changing the default audio or equalizer settings might lead to higher volume and should only be done with caution.
If the computer includes a headset or earphones and bears the "GS" mark, this combination is in compliance with EN 50332-1. For your own safety, headsets or earphones used with these products should comply with the headphone limits in EN 50332-2.
28 Chapter 4 Safety notices for desktops, thin clients and personal workstations
Laser safety
For products equipped with optical drives or fiber optic transceivers.
This product may be provided with an optical storage device (i.e., CD or DVD drive) and/or fiber optic transceiver. These contain lasers and are classified as Class 1 Laser Products in accordance with the standard IEC/EN 60825-1 and comply with its requirements.
Each laser product complies with US FDA Regulations of 21 CFR 1040.10 and 1040.11 or complies with those regulations except for deviations pursuant to Laser Notice No. 50, dated June 24, 2007.
WARNING!
Use of controls or adjustments or performance of procedures other than those specified herein or in the laser product’s installation guide may result in hazardous radiation exposure. To reduce the risk of exposure to hazardous radiation:
● Do not try to open the module enclosure. There are no user-serviceable components inside.
● Do not operate controls, make adjustments, or perform procedures to the laser device other than those specified herein.
● Allow only HP Authorized Service technicians to repair the unit.
Power supply and power cord set requirements
Power supply class I grounding requirements
For protection from fault currents, the equipment shall be connected to a grounding terminal. Plug the system power cord into an AC outlet that provides a ground connection. Substitute cords may not provide adequate fault protection. Only use the power cord supplied with this product or a Hewlett-
Packard authorized replacement.
Brazil notice
Este equipamento deve ser conectado obrigatoriamente em tomada de rede de energia elétrica que possua aterramento (três pinos), conforme a norma nbr abnt 5410,visando a segurança dos usuários contra choques elétricos.
Denmark
For tilslutning af de øvrige ledere, se medfølgende installationsvejledning.
Finland
Laite on liitettävä suojamaadoituskoskettimilla varustettuun pistorasiaan.
Norway
Apparatet må kun tilkoples jordet stikkontakt.
Sweden
Apparaten skall anslutas till jordat uttag, när den ansluts till ett nätverk.
Power supply requirements
The power supplies on some products have external power switches. The voltage select switch feature on the product permits it to operate from any line voltage between 100-127 or 200-240 volts
Laser safety 29
AC. Power supplies on those products that do not have external power switches are equipped with internal circuits that sense the incoming voltage and automatically switch to the proper voltage.
For safety reasons, use only the AC adapter provided with the unit or an authorized replacement adapter from Hewlett-Packard. Replacement part numbers may be found at http://www.hp.com/cgibin/hpsupport/index.pl
.
For use in Norway
This product is also designed for an IT power system with phase-to-phase voltage 230V.
Power cord set requirements
The power cord set received with the product meets the requirements for use in the country where the equipment was originally purchased. Use only the power cord provided with the unit or an authorized replacement power cord from Hewlett-Packard or an approved HP source. Replacement part numbers may be found at http://www.hp.com/cgi-bin/hpsupport/index.pl
.
Power cord sets for use in other countries must meet the requirements of the country where you use the product. For more information on power cord set requirements, contact your authorized HP dealer, reseller, or service provider.
WARNING!
Do not use power cords from other products.
Mismatched power cords may result in a shock and fire hazard.
The requirements listed below are applicable to all countries:
1.
The power cord must be approved by an acceptable accredited agency responsible for evaluation in the country where the power cord set will be installed.
2.
The length of the power cord must be between 1.8 m (6 feet) and 3.6 m (12 feet). For a power cord 2.0 m (6.56 feet) or less, the diameter of the wire must be a minimum of 0.75 mm 2 or
18AWG. If the power cord is longer than 2.0 m (6.56 feet), the diameter of the wire must be a minimum of 1.0 mm 2 or 16AWG.
The power cord should be routed so that it is not likely to be walked on or pinched by items placed upon it or against it. Particular attention should be paid to the plug, electrical outlet, and the point where the cord exits from the product.
WARNING!
Do not operate this product with a damaged power cord set. If the power cord set is damaged in any manner, replace it immediately. Damaged cords may result in user exposure to hazards.
Japan power cord requirements
For use in Japan, use only the power cord received with this product.
CAUTION: Do not use the power cord received with this product on any other products.
Pinch hazard
WARNING!
Observe pinch hazard areas. Keep fingers away from closing parts.
30 Chapter 4 Safety notices for desktops, thin clients and personal workstations
TV antenna connectors protection
External television antenna grounding
If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is electrically grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to proper electrical grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna-discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.
Lightning protection
For added protection of any product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug the product from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product from lightning and power line surges.
3
4
1
2
5
6
7
Table 4-1 Antenna Grounding
Reference Grounding Component
Electric Service Equipment
Power Service Grounding Electrode System (NEC Art 250, Part III)
Ground Clamps
Grounding Conductors (NEC Section 810.21)
Antenna Discharge Unit (NEC Section 810.20)
Ground Clamp
Antenna Lead-in Wire
TV antenna connectors protection 31
Note to CATV system installer
This reminder is provided to call the CATV systems installer’s attention to section 820.93 of the
National Electric Code, which provides guidelines for proper grounding and in particular, specify that the Coaxial cable shield shall be connected to grounding system of the building, as close to the point of cable entry as practical.
China safety notices
China: Altitude notice
Altitude warning for products not certified for use in >5000 m
仅适用于海拔 2000m 以下地区安全使用
– or –
仅适用于海拔 2000 米以下地区安全使用
32 Chapter 4 Safety notices for desktops, thin clients and personal workstations
China: Tropical warning notice
Tropical warning for products not certified for use in tropical regions.
仅适用于非热带气候条件下安全使用
Germany acoustics notice
Sound pressure level (LpA) is far below 70dB(A) (operator position, normal operation, according to
ISO 7779) Product noise emission data can be found in the product related “IT ECO Declarations” at
Internet address: http://www.hp.com/go/ted
Schalldruckpegel (LpA) ist weit unterhalb 70 dB(A) (Benutzerposition, normaler Betrieb, nach ISO
7779) Die Schallemissionswerte der Produkte können in den produktbezogenen “IT ECO
Declarations” auf folgender Internet Adresse gefunden werden: http://www.hp.com/go/ted
Germany acoustics notice 33
5 Environmental notices for notebook computers
This chapter provides country- and region-specific environmental notices and compliance information.
Some of these notices may not apply to your product.
Electronic hardware, packaging and battery recycling
HP encourages customers to recycle used electronic hardware, HP original print cartridges packaging, and rechargeable batteries. For more information about recycling programs, see the HP
Web site at http://www.hp.com/recycle .
Disposal of waste equipment by users
This symbol means do not dispose of your product with your other household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment. For more information, please contact your household waste disposal service or go to http://www.hp.com/ recycle .
Brazil battery disposal
Não descarte o produto eletrônico em lixo comum
HEWLETT PACKARD BRASIL LTDA (HP)
AV. JOSÉ LUIZ MAZALI Nº 360 - GALPÃO B-PARTE 1-BAIRRO
RESIDENCIAL BURCK - LOUVEIRA/SP - CEP: 13290-000
CNPJ: 61.797.924/0007-40
Centro de Informações HP: (11) 4004-7751 ou 0800-7097751
This product and its electronics components must not be discarded with your household waste.
Although the product components were manufactured in accordance with world standards restricting harmful substances, the product may contain, even in minute quantities, substances impacting the environment. At the end of the useful life of this product, you should return the product to HP. Failure to follow this guidance will subject the violator to the penalties provided by law. When a battery used in the HP product has reached the end of its useful life, you should return the battery either to HP or to the company commissioned by HP for technical support.
Este produto eletroeletrônico e seus componentes não devem ser descartados no lixo comum, pois embora estejam em conformidade com padrões mundiais de restrição a substâncias nocivas, podem conter, ainda que em quantidades mínimas, substâncias impactantes ao meio ambiente. Ao final da vida útil deste produto, o usuário deverá entregá-lo à HP. A não observância dessa orientação sujeitará o infrator às sanções previstas em lei. Após o uso, as pilhas e/ou baterias dos produtos HP
34 Chapter 5 Environmental notices for notebook computers
deverão ser entregues ao estabelecimento comercial ou rede de assistência técnica autorizada pela
HP.
Para maiores informações , inclusive sobre os pontos de recebimento, acesse: http://www.hp.com.br/ reciclar
Chemical substances
HP is committed to providing our customers with information about the chemical substances in our products as needed to comply with legal requirements such as REACH (Regulation EC No
1907/2006 of the European Parliament and the Council). A chemical information report for this product can be found at http://www.hp.com/go/reach .
China environmental notices
微型计算机电源声明书
能耗信息说明
惠普公司对笔记本电脑提供能耗信息说明，更多信息请登陆 http://www.hp.com/hpinfo/globalcitizenship/environment/productdata/chinasepa.html
回收信息说明
惠普公司对废弃的电子计算机（笔记本电脑）提供回收服务，更多信息请登陆 http://www.hp.com.cn/hardwarerecycle
环境标志信息
笔记本电脑已在中国环境标志认证产品的范围中，环境标志表明该产品不仅品质合格，而且在生产、使用和处理处置过程中符
合特定的环境保护要求，与同类产品相比，具有低毒少害、节约资源等环境优势，在国家环境保护部网站 ( http://www.
sepa.gov.cn
) 上可浏览到关于环境标志的信息。
China PC energy label
In accordance with “The Regulation of the Implementation on China Energy Label for
Microcomputers” (CEL-30), this microcomputer has an Energy Efficiency Label. The energy efficiency grade, TEC (Typical Energy Consumption), and product category presented on the label are determined and calculated according to the standard GB28380-2012.
1.
Energy Efficiency Grades
The grade is determined by the standard with the calculation of base consumption level with the sum of all the allowances for additional components such as main memory and graphics card.
For products of any grade, the TEC should not exceed the value specified in the following table:
Product Type
Desktop microcomputer, AIO Category A
Category B
Category C
Grade 1
98.0+∑Efa
125.0+∑Efa
159.0+∑Efa
TEC (kilowatt hour)
Grade 2
148.0+∑Efa
175.0+∑Efa
209.0+∑Efa
Grade 3
198.0+∑Efa
225.0+∑Efa
259.0+∑Efa
Chemical substances 35
Product Type TEC (kilowatt hour)
Portable Computer
Category D
Category A
Category B
Category C
184.0+∑Efa
20.0+∑Efa
26.0+∑Efa
54.5+∑Efa
NOTE: ∑Efa is the sum of power factor of product additional functions.
234.0+∑Efa
35.0+∑Efa
45.0+∑Efa
75.0+∑Efa
284.0+∑Efa
45.0+∑Efa
65.0+∑Efa
123.5+∑Efa
2.
Typical Energy Consumption
The energy consumption figure presented on the label is the data measured with the representative configuration that covers all the configurations in the registration unit which is selected according to CEL-30. Thus, actual energy consumption of this specific microcomputer may not be the same as the TEC data presented in the label.
3.
Product Category
The product category is determined by the standard according to the microcomputer’s configuration. The categorization of products complies with the regulations in the following table:
Product Type
Category A
Category B
Category C
Category D
Configuration Description
Desktop microcomputer, AIO
The desktop microcomputer and AIO whose configuration is out of the scope of
Category B, C, and D
CPU physical core number of 2, and system memory of not less than 2GB
Portable Computer
The portable computer whose configuration is out of the scope of Category B and C
A Discrete GPU
CPU physical core number of over 2, with at least one of the following features:
1.
System memory of not less than 2 GB
2.
A Discrete GPU
CPU physical core number of not less than
4, with at least one of the following features:
1.
System memory of not less than 4 GB
2.
A Discrete GPU with Frame Buffer
Width not less than 128-bit
The product that has a CPU physical core number of not less than 2, system memory of not less than 2GB, A Discrete GPU with
Frame Buffer Width not less than 128-bit.
For more details on the specification, please refer to the standard GB28380-2012.
本机根据《微型计算机能源效率标识实施规则》（CEL‐30）的要求加施中国能效标识。能效标识中显示
的能效等级、典型能源消耗和产品类型均根据《微型计算机能效限定值及能效等级》（GB28380‐2012）
的要求确定。对上述标识内容的说明如下:
1.
能效等级
微型计算机的能效等级由基础能源消耗值和附加功能功耗因子之和决定。微型计算机能效各等级
的典型能源消耗应不大于下表的规定
36 Chapter 5 Environmental notices for notebook computers
微型计算机类型
台式微型
计算机及
一体机
便携式
计算机
注：ΣEfa 为微型计算机附加功能功耗因子之和
A 类
B 类
C 类
D 类
A 类
B 类
C 类
能源消耗 (千瓦时)
1
98.0+∑Efa
2
148.0+∑Efa
125.0+∑Efa
159.0+∑Efa
184.0+∑Efa
20.0+∑Efa
26.0+∑Efa
54.5+∑Efa
175.0+∑Efa
209.0+∑Efa
234.0+∑Efa
35.0+∑Efa
45.0+∑Efa
75.0+∑Efa
3
198.0+∑Efa
225.0+∑Efa
259.0+∑Efa
284.0+∑Efa
45.0+∑Efa
65.0+∑Efa
123.5+∑Efa
2.
典型能源消耗
典型能源消耗值代表一个备案单元中，符合《微型计算机能源效率标识实施规则》要求的代表性规
格型号产品的数值。因此，本机的典型能源消耗值可能与其所加施的能效标识中所示的典型能源消
耗值不一致。
3.
产品类型
产品类型根据微型计算机的配置确定。参见下表：
类型
A 类
B 类
C 类
D 类
配置说明
台式微型计算机及一体机
下列 B 类、C 类、D 类配置以外的台式微型
计算机及一体机
中央处理器（CPU）物理核心数为 2，系统
内存大于等于 2GB
便携式计算机
下列 B 类、C 类配置以外的便携式计算机
具有独立图形显示单元（GPU）
中央处理器（CPU）物理核心数大于 2，且
至少具有以下特征中的一条 a.
a）系统内存大于等于 2GB； b.
独立图形显示单元（GPU)
中央处理器（CPU）物理核心数大于等于 4，
且至少具有以下特征中的一条： a.
系统内存大于等于 4GB； b.
具有独立图形显示单元（GPU）且显存
位宽大于等于 128 位
中央处理器（CPU）物理核心数大于等于 2，
系统内存大于等于 2GB，具有独立图形显示
单元（GPU）且显存位宽大于等于 128 位.
关于标识内容的更详细技术信息，请参考《微型计算机能效限定值及能效等级》（GB28380-2012）
China PC energy label 37
China restriction of hazardous substances (RoHS)
The Table of Toxic and Hazardous Substances/Elements and their Content
As required by China's Management Methods for Controlling Pollution by Electronic Information
Products
Part Name
Battery
Cables
Camera
Chassis/Other
Flash memory card reader
Floppy disk drive
Hard disk drive
Headphones
I/O PCAs
Keyboard
Liquid crystal display
(LCD) panel
Media (CD/DVD/floppy)
Memory
Motherboard, processor, heat sinks
Mouse
Optical disk drive
Optional docking device
Power adapter
Power supply
Remote control
Smart card/Java™ card reader
Speakers, external
TV tuner
USB flash memory drive
Lead
(Pb)
X
X
X
X
X
O
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
Mercury
(Hg)
O
O
O
O
O
Toxic and Hazardous Substances and Elements
Cadmium
(Cd)
Hexavalent
Chromium
(Cr(VI))
Polybrominated biphenyls (PBB)
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
Polybrominated diphenyl ethers
(PBDE)
O
O
O
O
O
O
O
O
38 Chapter 5 Environmental notices for notebook computers
Part Name
Lead
(Pb)
Mercury
(Hg)
Toxic and Hazardous Substances and Elements
Cadmium
(Cd)
Hexavalent
Chromium
(Cr(VI))
Polybrominated biphenyls (PBB)
Polybrominated diphenyl ethers
(PBDE)
USB hub
Web camera
X
X
O
O
O
O
O
O
O
O
O
O
Wireless receiver X O O O O O
Wireless cards X O O O O O
O: Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement in SJ/T11363-2006.
X: Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials used for this part is above the limit requirement in SJ/T11363-2006.
All parts named in this table with an X are in compliance with the European Union's RoHS Legislation “Directive 2002/95/EC of the European Parliament and of the Council of 27 January 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment” and its amendments.
NOTE: The referenced Environmental Protection Use Period Marking was determined according to normal operating use conditions of the product such as temperature and humidity.
产品中有毒有害物质或元素的名称及含量
根据中国《电子信息产品污染控制管理办法》
部件名
电池
电缆
照相机
机箱/其他
闪存读卡器
软盘驱动器
硬盘驱动器
耳机
I/O PCA
键盘
液晶显示器 (LCD) 面板
介质（CD/DVD/软盘）
内存
主板、处理器和散热器
X
X
X
X
铅 (Pb)
X
X
X
X
X
O
X
X
X
X
O
O
O
O
汞 (Hg)
O
O
O
O
O
O
O
O
O
O
O
O
O
O
镉 (Cd)
O
O
O
O
O
O
O
O
O
O
有毒有害物质和元素
六价铬
(Cr(VI))
O
O
O
多溴化联苯 (PBB) 多溴二苯醚(PBDE)
O O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
China restriction of hazardous substances (RoHS) 39
部件名 铅 (Pb) 汞 (Hg) 镉 (Cd)
有毒有害物质和元素
六价铬
(Cr(VI)) 多溴化联苯 (PBB) 多溴二苯醚(PBDE)
鼠标
光盘驱动器
对接设备选件
电源适配器
电源
X
X
X
X
X
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
遥控器
智能卡/Java™ 卡读卡器
外接扬声器
电视调谐器
USB 闪存盘
USB 集线器
网络摄像头
无线接收设备
X
X
X
X
X
X
X
X
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
无线网卡 X O O O O O
O：表示该有毒有害物质在该部件所有均质材料中的含量均在 SJ/T11363-2006 规定的限量要求以下。
X：表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 SJ/T11363-2006 规定的限量要求。
表中标有“X”的所有部件都符合欧盟 RoHS 法规“欧洲议会和欧盟理事会 2003 年 1 月 27 日关于电子电器设备中限制使用某些
有害物质的 2002/95/EC 号指令”及其增补版。
注 : 环保使用期限的参考标识取决于产品正常工作的温度和湿度等条件。
40 Chapter 5 Environmental notices for notebook computers
India restriction of hazardous substances (RoHS)
This product complies with the “India E-waste (Management and Handling) Rule 2011” and prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers in concentrations exceeding 0.1 weight % and 0.01 weight % for cadmium, except for the exemptions set in Schedule 2 of the Rule.
Japan material content declaration
A Japanese regulatory requirement, defined by specification JIS C 0950, 2008, mandates that manufacturers provide material content declarations for certain categories of electronic products offered for sale after July 1, 2006. To view the JIS C 0950 material declaration for this product, see the HP Web site at http://www.hp.com/go/jisc0950 .
Mexico Sustainable Energy Use Law
This product has been labeled in compliance with the Mexico Sustainable Energy Use Law requiring disclosure of power consumption in the normal use (idle mode) and standby modes. Your product is one of many configurations in this model family; the idle mode power consumption of your specific configuration may vary from the information on the label. Actual power consumption of your product may be higher or lower than the value reported on the Mexico product energy label due to factors such as configuration (components and modules chosen) and usage (tasks being performed, software installed and running, etc.).
Turkey EEE regulation
In Conformity with the EEE regulation
EEE Yönetmeliğine Uygundur
Ukraine restriction of hazardous substances (RoHS)
The equipment complies with requirements of the Technical Regulation, approved by the Resolution of Cabinet of Ministry of Ukraine as of December 3, 2008 № 1057, in terms of restrictions for the use of certain dangerous substances in electrical and electronic equipment.
Україна обмеження на наявність небезпечних речовин
Обладнання відповідає вимогам Технічного регламенту щодо обмеження використання деяких небезпечних речовин в електричному та електронному обладнані, затвердженого постановою
Кабінету Міністрів України від 3 грудня 2008 № 1057.
Perchlorate material—special handling may apply
See http://www.dtsc.ca.gov/hazardouswaste/perchlorate .
This product’s real-time clock battery or coin cell battery may contain perchlorate and may require special handling when recycled or disposed of in California.
India restriction of hazardous substances (RoHS) 41
6 Environmental notices for desktops, thin clients and personal workstations
Electronic hardware, packaging and battery recycling
HP encourages customers to recycle used electronic hardware, HP original print cartridges packaging, and rechargeable batteries. For more information about recycling programs, go to http://www.hp.com/recycle .
For information about recycling the product in Japan, refer to http://www.hp.com/jp/hardwarerecycle/ .
Disposal of waste equipment by users
This symbol means do not dispose of your product with your other household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment. For more information, please contact your household waste disposal service or go to http://www.hp.com/recycle .
Brazil battery disposal
Não descarte o produto eletrônico em lixo comum
HEWLETT PACKARD BRASIL LTDA (HP)
AV. JOSÉ LUIZ MAZALI Nº 360 - GALPÃO B-PARTE 1-BAIRRO
RESIDENCIAL BURCK - LOUVEIRA/SP - CEP: 13290-000
CNPJ: 61.797.924/0007-40
Centro de Informações HP: (11) 4004-7751 ou 0800-7097751
This product and its electronics components must not be discarded with your household waste.
Although the product components were manufactured in accordance with world standards restricting harmful substances, the product may contain, even in minute quantities, substances impacting the environment. At the end of the useful life of this product, you should return the product to HP. Failure to follow this guidance will subject the violator to the penalties provided by law. When a battery used in the HP product has reached the end of its useful life, you should return the battery either to HP or to the company commissioned by HP for technical support.
Este produto eletroeletrônico e seus componentes não devem ser descartados no lixo comum, pois embora estejam em conformidade com padrões mundiais de restrição a substâncias nocivas, podem conter, ainda que em quantidades mínimas, substâncias impactantes ao meio ambiente. Ao final da vida útil deste produto, o usuário deverá entregá-lo à HP. A não observância dessa orientação sujeitará o infrator às sanções previstas em lei. Após o uso, as pilhas e/ou baterias dos produtos HP deverão ser entregues ao estabelecimento comercial ou rede de assistência técnica autorizada pela
HP.
Para maiores informações , inclusive sobre os pontos de recebimento, acesse: http://www.hp.com.br/ reciclar
42 Chapter 6 Environmental notices for desktops, thin clients and personal workstations
ENERGY STAR ® qualification (select models only)
NOTE: This section applies only to products bearing the ENERGY STAR logo.
As an ENERGY STAR Partner, Hewlett-Packard Company has followed the U.S. Environmental
Protection Agency (EPA) enhanced product qualification and certification process to ensure that the products marked with the ENERGY STAR logo are ENERGY STAR-qualified per the applicable
ENERGY STAR guidelines for energy efficiency. The following logo appears on all ENERGY STARqualified computers.
The ENERGY STAR Computers Program was created by the EPA to promote energy efficiency and reduce air pollution through more energy-efficient equipment in homes, offices, and factories. One way products achieve this energy efficiency is by reducing power consumption when not being used through the Microsoft Windows Power Management feature.
The Power Management feature enables the computer to enter a low-power (or “sleep”) mode after a period of inactivity. When used with an external monitor that is ENERGY STAR-qualified, this feature also supports the similar power management features of the external monitor.
To take advantage of this energy savings, the Power Management feature has been preset to power down the computer and monitor within the following specified periods of inactivity:
Computer
Within 30 minutes
Monitor/Integrated Display
Within 15 minutes
Both the computer and monitor can be woken from sleep mode through user interaction with any of the computer input devices (mouse, keyboard, and so on). When configured with Wake On LAN
(WOL) enabled, the computer can also be woken by a network signal.
See the EPA ENERGY STAR Power Management Web site for more information about the energy and financial savings potential of the Power Management Feature: http://www.energystar.gov/ powermanagement .
See the EPA ENERGY STAR Web site for more information about the ENERGY STAR program and its environmental benefits: http://www.energystar.gov
.
CAUTION: Using the Energy Save Monitor feature with monitors that are not ENERGY STARqualified can cause video distortion when an Energy Save timeout occurs.
NOTE: ENERGY STAR is not supported on desktop computers, integrated desktop computers, small-scale servers and workstations configured with some versions of Linux or FreeDOS.
If it is necessary to restore the operating system, you must also reset the ENERGY STAR settings (if applicable) after the restore.
For Windows 7, to verify the factory default power settings for your desktop or workstation, select
Start > Control Panel, and then type Power Options in the search window.
For Windows 8, to verify the factory default power settings for your desktop or workstation, from the
Start screen, type power , select Settings, and then select Power Options from the list of applications.
ENERGY STAR® qualification (select models only) 43
Chemical substances
HP is committed to providing our customers with information about the chemical substances in our products as needed to comply with legal requirements such as REACH (Regulation EC No.
1907/2006 of the European Parliament and the Council). A chemical information report for this product can be found at http://www.hp.com/go/reach .
Mercury statement
This HP product may contain the following material that might require special handling at end-of-life:
● Mercury in the fluorescent lamp in the display LCD
Disposal of mercury can be regulated because of environmental considerations. For disposal or recycling information, please contact your local authorities or the Electronic Industries Alliance (EIA)
( http://www.eiae.org
).
Perchlorate material–special handling may apply
The computer’s real-time clock battery may contain perchlorate and may require special handling when recycled or disposed of in California. See http://www.dtsc.ca.gov/hazardouswaste/perchlorate/ .
China PC energy label
In accordance with “The Regulation of the Implementation on China Energy Label for
Microcomputers” (CEL-30), this microcomputer has an Energy Efficiency Label. The energy efficiency grade, TEC (Typical Energy Consumption), and product category presented on the label are determined and calculated according to the standard GB28380-2012.
1.
Energy Efficiency Grades
The grade is determined by the standard with the calculation of base consumption level with the sum of all the allowances for additional components such as main memory and graphics card.
For products of any grade, the TEC should not exceed the value specified in the following table:
Product Type
Desktop microcomputer, AIO Category A
Category B
Category C
Category D
Grade 1
98.0+∑Efa
125.0+∑Efa
159.0+∑Efa
184.0+∑Efa
TEC (kilowatt hour)
Grade 2
148.0+∑Efa
175.0+∑Efa
209.0+∑Efa
234.0+∑Efa
Grade 3
198.0+∑Efa
225.0+∑Efa
259.0+∑Efa
284.0+∑Efa
44 Chapter 6 Environmental notices for desktops, thin clients and personal workstations
Product Type
Portable Computer Category A
Category B
Category C
20.0+∑Efa
26.0+∑Efa
54.5+∑Efa
TEC (kilowatt hour)
35.0+∑Efa
45.0+∑Efa
75.0+∑Efa
NOTE: ∑Efa is the sum of power factor of product additional functions.
45.0+∑Efa
65.0+∑Efa
123.5+∑Efa
2.
Typical Energy Consumption
The energy consumption figure presented on the label is the data measured with the representative configuration that covers all the configurations in the registration unit which is selected according to CEL-30. Thus, actual energy consumption of this specific microcomputer may not be the same as the TEC data presented in the label.
3.
Product Category
The product category is determined by the standard according to the microcomputer’s configuration. The categorization of products complies with the regulations in the following table:
Product Type
Category A
Category B
Category C
Category D
Desktop microcomputer, AIO
Category B, C, and D
Configuration Description
The desktop microcomputer and AIO whose configuration is out of the scope of
CPU physical core number of 2, and system memory of not less than 2GB
CPU physical core number of over 2, with at least one of the following features:
1.
System memory of not less than 2 GB
2.
A Discrete GPU
CPU physical core number of not less than
4, with at least one of the following features:
1.
System memory of not less than 4 GB
2.
A Discrete GPU with Frame Buffer
Width not less than 128-bit
Portable Computer
The portable computer whose configuration is out of the scope of Category B and C
A Discrete GPU
The product that has a CPU physical core number of not less than 2, system memory of not less than 2GB, A Discrete GPU with
Frame Buffer Width not less than 128-bit.
For more details on the specification, please refer to the standard GB28380-2012.
本机根据《微型计算机能源效率标识实施规则》（CEL‐30）的要求加施中国能效标识。能效标识中显示
的能效等级、典型能源消耗和产品类型均根据《微型计算机能效限定值及能效等级》（GB28380‐2012）
的要求确定。对上述标识内容的说明如下:
1.
能效等级
微型计算机的能效等级由基础能源消耗值和附加功能功耗因子之和决定。微型计算机能效各等级
的典型能源消耗应不大于下表的规定
微型计算机类型
1
能源消耗 (千瓦时)
2 3
China PC energy label 45
微型计算机类型
台式微型
计算机及
一体机
计算机
便携式
注：ΣEfa 为微型计算机附加功能功耗因子之和
A 类
B 类
C 类
D 类
A 类
B 类
C 类
能源消耗 (千瓦时)
98.0+∑Efa 148.0+∑Efa
125.0+∑Efa
159.0+∑Efa
184.0+∑Efa
20.0+∑Efa
26.0+∑Efa
54.5+∑Efa
175.0+∑Efa
209.0+∑Efa
234.0+∑Efa
35.0+∑Efa
45.0+∑Efa
75.0+∑Efa
198.0+∑Efa
225.0+∑Efa
259.0+∑Efa
284.0+∑Efa
45.0+∑Efa
65.0+∑Efa
123.5+∑Efa
2.
典型能源消耗
典型能源消耗值代表一个备案单元中，符合《微型计算机能源效率标识实施规则》要求的代表性规
格型号产品的数值。因此，本机的典型能源消耗值可能与其所加施的能效标识中所示的典型能源消
耗值不一致。
3.
产品类型
产品类型根据微型计算机的配置确定。参见下表：
类型
A 类
B 类
C 类
D 类
配置说明
台式微型计算机及一体机
下列 B 类、C 类、D 类配置以外的台式微型
计算机及一体机
便携式计算机
下列 B 类、C 类配置以外的便携式计算机
中央处理器（CPU）物理核心数为 2，系统
内存大于等于 2GB
中央处理器（CPU）物理核心数大于 2，且
至少具有以下特征中的一条 a.
a）系统内存大于等于 2GB； b.
独立图形显示单元（GPU)
中央处理器（CPU）物理核心数大于等于 4，
且至少具有以下特征中的一条： a.
系统内存大于等于 4GB； b.
具有独立图形显示单元（GPU）且显存
位宽大于等于 128 位
具有独立图形显示单元（GPU）
中央处理器（CPU）物理核心数大于等于 2，
系统内存大于等于 2GB，具有独立图形显示
单元（GPU）且显存位宽大于等于 128 位.
关于标识内容的更详细技术信息，请参考《微型计算机能效限定值及能效等级》（GB28380-2012）
46 Chapter 6 Environmental notices for desktops, thin clients and personal workstations
China restriction of hazardous substances (RoHS)
ᴹ∂ᴹᇣ⢙䍘઼ݳ㍐৺ަਜ਼䟿㺘 ṩᦞѝഭⲴlj⭥ᆀؑӗ૱⊑ḃ᧗ࡦ㇑⨶࣎⌅NJ ѱᶵ༺⨼ಞૂ
ᮙ✣ಞ
ᆎᶗ
I/O PCAs
⭫Ⓠ
䭤ⴎ
啖ḽ ᵰެԌ
伄
䜞ཌ䜞։
䰻䈱䇴༽
ཌ䜞䇴༽
⭫㔼
⺢ⴎ傧ࣞಞ
ᱴ⽰ኅ
O: 㺞⽰䈛ᴿ∈ᴿᇩ⢟䍞൞䈛䜞Ԭᡶᴿൽ䍞ᶆᯏѣⲺ䠅ൽ൞ SJ/T11363-2006 ḽ㿺ᇐⲺ䲆䠅㾷≸ԛсȾ
X: 㺞⽰䈛ᴿ∈ᴿᇩ⢟䍞㠩ቇ൞䈛䜞ԬⲺḆжൽ䍞ᶆᯏѣⲺ䠅䎻࠰
SJ/T11363-2006 ḽ㿺ᇐⲺ䲆䠅㾷≸Ⱦ
㺞ѣḽᴿć X ĈⲺᡶᴿ䜞Ԭ䜳ㅜਾ⅝ⴕ RoHS ⌋㿺ć⅝⍨䇤Րૂ⅝ⴕ⨼ӁՐ
2003 ᒪ 1 ᴾ 27 ᰛީӄ⭫ᆆ⭫ಞ䇴༽ѣ䲆ֵ⭞Ḇӑᴿᇩ⢟䍞Ⲻ 2002/95/EC
ਭԚĈȾ
⌞φ⧥ֵؓ⭞ᵕ䲆Ⲻ৸㘹ḽ䇼ߩӄӝ↙ᑮᐛ֒Ⲻᓜૂ⒵ᓜㅿᶗԬȾ
China restriction of hazardous substances (RoHS) 47
The Table of Toxic and Hazardous Substances/Elements and their Content
As required by China's Management Methods for Controlling Pollution by Electronic Information
Products
Table 6-1 Toxic and Hazardous Substances and Elements
Part Name Lead
(Pb)
Mercury
(Hg)
Cadmium
(Cd)
Hexavalent
Chromium
(Cr(VI))
Motherboard, processor and heat sink X
Memory X
I/O PCAs
Power supply
Keyboard
X
X
X
Mouse
Chassis/Other
Fans
Internal/External Media Reading
Devices
External Control Devices
Cable
Hard Disk Drive
Display
X
X
X
X
X
X
X
X
O
O
O
O
O
O
O
O
O
O
O
O
X
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
Polybrominated biphenyls
(PBB)
O
O
O
O
O
O
O
O
O
O
O
O
O
Polybrominated diphenyl ethers (PBDE)
O: Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement in SJ/T11363-2006.
X: Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials used for this part is above the limit requirement in SJ/T11363-2006.
All parts named in this table with an “X” are in compliance with the European Union's RoHS
Legislation – “Directive 2002/95/EC of the European Parliament and of the Council of 27 January
2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment”.
NOTE: The referenced Environmental Protection Use Period Marking was determined according to normal operating use conditions of the product such as temperature and humidity.
48 Chapter 6 Environmental notices for desktops, thin clients and personal workstations
India restriction of hazardous substances (RoHS)
This product complies with the “India E-waste (Management and Handling) Rule 2011” and prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls or polybrominated diphenyl ethers in concentrations exceeding 0.1 weight % and 0.01 weight % for cadmium, except for the exemptions set in Schedule 2 of the Rule.
IT ECO declarations
Desktop PCs and Thin Clients http://www.hp.com/hpinfo/globalcitizenship/environment/productdata/itecodesktop-pc.html?
jumpid=reg_R1002_USEN
Workstations http://www.hp.com/hpinfo/globalcitizenship/environment/productdata/itecoworkstatio.html
Japan restriction of hazardous substances (RoHS)
2008 年、日本における製品含有表示方法、JISC0950 が公示されました。製造事業者は、2006 年 7
月１日 以降に販売される電気・電子機器の特定化学物質の含有に付きまして情報提供を義務付けられ
ました。製品の部材表示に付きましては、 http://www.hp.com/go/jisc0950 を参照してください
A Japanese regulatory requirement, defined by specification JIS C 0950, 2008, mandates that manufacturers provide Material Content Declarations for certain categories of electronic products offered for sale after July 1, 2006.
To view the JIS C 0950 material declaration for this product, visit http://www.hp.com/go/jisc0950 .
Ley para el Aprovechamiento Sustentable de la Energía de
México (Mexico Sustainable Energy Use Law)
Se ha etiquetado este producto en conformidad con la Ley para el Aprovechamiento Sustentable de la Energía de México, que requiere la divulgación del consumo de energía del modo de uso normal
(modo inactivo) y del modo de espera. Su producto es una de las muchas configuraciones de esta familia de modelos; el consumo de energía del modo inactivo de su configuración específica puede diferir de la información de la etiqueta. El consumo real de energía de su producto puede ser mayor o menor que el valor informado en la etiqueta de energía de producto para México a causa de factores como la configuración (componentes y módulos seleccionados) y el uso (tareas que se están efectuando, software instalado y en ejecución, etc.).
NOTE: Esta ley no es aplicable a los workstations.
This product has been labeled in compliance with the Mexico Sustainable Energy Use Law requiring disclosure of power consumption in the normal use (idle mode) and standby modes. Your product is one of many configurations in this model family; the idle mode power consumption of your specific configuration may vary from the information on the label. Actual power consumption of your product may be higher or lower than the value reported on the Mexico product energy label due to factors such as configuration (components and modules chosen) and usage (tasks being performed, software installed and running, etc.).
India restriction of hazardous substances (RoHS) 49
NOTE: Workstations are not labeled because the law is not applicable to the workstation product category.
Turkey EEE regulation
Türkiye Cumhuriyeti: EEE Yönetmeliğine Uygundur
Україна обмеження на наявність небезпечних речовин
(Ukraine restriction of hazardous substances (RoHS))
Обладнання відповідає вимогам Технічного регламенту щодо обмеження використання деяких небезпечних речовин в електричному та електронному обладнанні, затвердженого постановою
Кабінету Міністрів України від 3 грудня 2008 № 1057.
The equipment complies with requirements of the Technical Regulation, approved by the Resolution of Cabinet of Ministry of Ukraine as of December 3, 2008 № 1057, in terms of restrictions for the use of certain dangerous substances in electrical and electronic equipment.
50 Chapter 6 Environmental notices for desktops, thin clients and personal workstations
TCO Certified Edge Certification
This section applies only to products bearing the TCO Certified Edge logo.
TCO Certified Edge Certification 51
Index
A
B
C
China environmental notices 35
China restriction of hazardous
D
Declaration of Conformity
disposal notices
E electronic hardware and battery
environmental notices 34 equipment disposal notice 34
F
Federal Communications
Commission desktops, thin clients and
desktops, thin clients,
desktops, thin clients, workstations modifications
notebook computers
modifications 2 notebook computers notice 2
G
H headset and earphone volume
I
India restriction of hazardous
J
Japan material content
Japan restriction of hazardous
K
L
M
Macrovision Corporation notice
Mexico Sustainable Energy Use
modem statements
modifications, desktops, thin clients, workstations
Federal Communications
modifications, notebook computers
Federal Communications
N
New Zealand modem statement
notices
China restriction of hazardous
environmental 34 equipment disposal 34
headset and earphone volume
India restriction of hazardous
Japan restriction of hazardous
Thailand WWAN wireless
52 Index
Ukraine restriction of hazardous
notices, desktops, thin clients and workstations
Federal Communications
notices, notebook computers
Federal Communications
P
R recycling, electronic hardware and
S
T
TCO Certified Edge Certification
Thailand WWAN wireless notice
tropical warning notice 26, 33
TV tuner, cable grounding notice
U
Ukraine restriction of hazardous
V
volume level notice, headset and
W
wireless LAN devices 3, 19, 20
Index 53
Изтегляне
Публичната връзка е актуализирана
Публичната връзка към вашия чат е актуализирана. You may view and manage your chat links after registration here.
Публична връзка към документа
Реклама