DONGYANG Electronics RCDXM120MCB car media receiver USER'S MANUAL

Test Report No.: GETEC-E3-05-016
FCC Part 15 Subpart C Certification
APPENDIX I
: USER’S MANUAL
EUT Type : FM Transmitter (built-in 12” Motorized combo)
FCC ID.: RCDXM120MCB
CAUTION
Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
GYG#FRPER#PRQLWRU
45%#TFT-LCD#PRWRUL]HG
08/&34."/6"-
13
13
13
14
Picture Control
Password Mode
Password Change
Password Setup
TV Type
PBC
Audio
Subtitle
Disc Menu
Parental
Country Region
Default
PREFERENCES
Quality
Video Setup
Dolby Digital Setup
Equalizer
Audio Setup
TV Display
Angle Mark
OSD Lang
Captions
Screen Saver
Last Memory
Setup Menu
General Setup
DVD Setup
BASS/TREBLE/BALANCE/LOUDNESS
Volume Control
APC
CONTRAST/BRIGHT/COLOR/TINT
SCREEN
16
16
17
17
17
17
18
18
18
18
18
19
20
20
22
22
22
22
22
24
23
23
24
24
24
24
15
15
10
10
10
10
11
11
12
12
Pwpre ON/OFF
Monitor Angle Adjustment
Mute Function
Volume Control
Mode Setting
DVD Mode
AUX (AV1/AV2) Mode
Power and Mode Selection
6
8
6
Name and function of each parts
Unit
Remote Controller
4
Caution
Contents
41
40
Troubleshooting
Specifications
39
35
36
36
36
36
37
38
Disc Information
FM TX
TV Mode
How To Select Channels Automatically
How To Select and Delete Channels by Menual
Channel Mode Setting
Connection diagram (TV/FM)
How to watching TV
35
34
Installation
Optional Specification
33
25
25
25
25
25
25
26
26
26
26
27
27
28
28
28
29
29
30
30
30
31
31
31
32
32
32
Connection Diagram
EJECT
VOL +/MUTE
PLAY OR PAUSE
AUDIO
STOP
ARROWS
SETUP
MENU
DISPLAY
NUMBER BUTTONS
SUBTITLE
TITLE
SLOW
FAST REVERSE SEARCHING
FAST FORWARD SEARCHING
PREV
NEXT
REPEAT A-B
REPEAT
NTSC/PAL
ANGLE
PBC
ZOOM
GOTO
DVD Functions
Installation of all TV monitors
must be out of the driver’s
field of sight.
Be careful not to overload your
cigarette lighter plug by adding
more than one device at a time.
Be careful not to drop or
apply under pressure to the
front panel of your video
monitor. If the screen cracks
due to misuse, your warranty
will be void!
Do not mount the product where
it will obstruct the deployment of
the airbag or in an area where it
would affect the vehicular control.
Also be careful to avoid mounting
the product where it can become
hazardous during sudden stops or
in the event of an accident.
BENZENE
alcohol
Use only a damp cloth to clean
the screen and use only purified
water on the cloth, wring out all
excess water prior to wiping the
screen. Do not use any cleaners
or chemicals to clean the screen.
In most cases a dry cloth will do!
Use extra caution with any liquids
in your car. If you or your child
spill any liquid on these products,
pull your vehicle to the roadside
and turn the key off to disconnect
or wipe the products with a towel. Do not
operate the equipment until all liquids have
either evaporated or you have had the monitor
inspected at a service center by a qualified
technician. Severe harm or danger can
be occured.
WARNING
The exclamation point within an equilateral triangle is intended
to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying
the product.
Do not try and service these
products yourself, seek only
a qualified service center or
factory sevice center.
$"65*0/
8"3/*/(
The lightening flash with arrowhead symbol within an equilateral
triangle is intended to alert the user to the presence of
"dangerous voltage" within the product's enclosure that may be
of sufficient magnitude to constitute a risk of electric shock to
people.
5IFSFBSFUXPLJOETPGBMBSNTZNCPMTBTGPMMPXT
Please read and observe all warnings and instructions in this owner’s manual
and those marked on the unit. Retain this booklet for future reference.
Caution
CAUTION
This product is designed for
operation with a 12 Volt DC,
negative ground vehicle. It
is not suitable for operation
under other conditions or
voltages.
Watching the monitor for an
extended period of time
without the engine running
may deplete the vehicle's
battery charge.
6. Do not cut the car power supply off while a disc is playing. It can cause
damage to the DVD Player.
5. DVD Players use an invisible laser beam which can cause hazardous radiation
exposure. Be sure to operate the unit correctly as instructed.
4. Do not open covers and repair yourself. Refer servicing to qualified personnel.
3. Your optimum picture quality is achieved when you are directly in front of the
monitor (+/-30 degrees).
2. From time to time when your vehicle is extremely hot or cold you must allow
time for your air conditioner or heater to cool or heat the vehicle and for
operating temperatures to return to normal operating ranges. Your monitor will
return to its normal functions when these operating ranges are achieved.`
1. The operating temperature of this product is limited to -4ı ~ +176ı.
Your vehicle can reach temperatures up to 212ı in the summertime.
Check Point
Do not cover or stop up heater
ducts or vents. It may be the origin
of a fire or receives an electric
shock.
Don't touch the unit there is a
flash of lightning. It may
receive an electric shock.
Quality installations are best
performed by qualified and
certifled installers.
Caution
Unit
You can hear the sound of
audio sound by using
wireless infrared headphone.
(Wireless IR headphone is optional accessory)
Wireless Infrared Receiver.
This allows transmitting of the
remote control's IR signals for
controlling all functions of your
monitor.
Remote Control Eye.
-".1
Name and function of each parts
MENU Select Button
(When TV function add,
select the desired chennel)
POWER Button
Power ON/OFF button
Disc loading slot
AUX Input Jack
Disc LED
EJECT Button
VOL/ADJ Button
Volume control and adjust
button for each menu.
I ĴButton
Ĵ
REW Search button
Ķ
ĶI Button
FWD Search button
DOOR LAMP Button
ROOM LAMP Button
ÿButton
Stop button
ĶɇButton
Play/Pause button
MENU Button
OSD display button
MODE Button
DVD Ą AV1 Ą AV2
(TV function added
TVĄAV1ĄAV2ĄDVD)
Name and function of each parts
APC button
DISPLAY button
GOTO button
Numberic button
MENU button
TITLE button
PICTURE button
FF/FR button
Slow button
Play/Pause button
REW Search button
MODE Button
DVD Ą AV1 Ą AV2
(TV function added
TVĄAV1ĄAV2ĄDVD)
Battery
Normal/DVD switch
AUDIO button
Volume control button (DVD)
STOP button
Control stick
FWD search button
Monitor display adjustment button
Mute button
A.MEMO button
NTSC/PAL button
A-B button
REPEAT button
SETUP button
PBC button
Control stick
SUBTITLE button
ADD/DEL button
ANGLE button
ZOOM button
EJECT button
If you want to use Etc button, please on the down the switch remote control.
Power button
Remote Controller (Etc Function)
If you want to use normal button, please on the down the switch remote control.
Name and function of each parts
Remote Controller (Normal Function)
Name and function of each parts
2. When mute is on, press the mute button again on the
remote control, displayed "MUTE Off" on the monitor
and play the audio sound.
1. Press the mute button on the remote control, displayed
"MUTE" on the monitor and mute the audio sound.
Mute the audio sound.
Mute Function
Remote Controller
Control the Monitor Angle as your taste.
Whenever press the Ā/Ă button, monitor angles will be changed 3 steps.
Monitor Angle Adjustment
When you add the TV modulator (optional),
mode will be changed as below;
DVD ˧ (TV) ˧GAV1 ˧G AV2
Mode will be changed as below;
DVD ˧GAV1 ˧GAV2
Unit
Remote Controller
Select the desired mode by pressing the MODE button on the unit or
on the remote control.
Mode Setting
୔ Volume Control consist of 50 steps,
but DVD mode consist of adjustable 20 steps.
2. When DVD mode, control the audio volume by pressing
the + / - button on the unit or the VOL + / - button on the Remote Control.
1. When AV1, AV2, (TV) mode, control the audio volume by pressing
the + / - button on the unit or the VOL + / - button on the remote control.
(There is no PICTURE / AUDIO Menu displayed.
Volume Control
Control the audio volume as your taste.
Power ON/OFF
Power and Mode Selection
Press the
button on the remote control or on the unit to turn the power on
and releasing the monitor automatically.
Press the
button to turn the power off and close the monitor automatically.
Power and Mode Selection
GAME
AV Input (AV1)
AV Input
(AV2)
4. Play the external device.
3. Select the AV1 or AV2 mode by pressing the MODE button on the unit
or on the remote control.
2. Turn the power on the unit and external devices
AV Output
CAMCORDER
1. Connect the external devices as shown below (™efer Connection Diagram).
AUX (AV1/AV2) Mode
öWhen power on or except DVD mode,
sert the disc to turn the power on and
play the disc automatically.
2. Insert a disc you want to play into
the loading disc slot with label side up.
1. Select the DVD mode by pressing
the MODE button on the unit or
on the remote control.
DVD Mode
Power and Mode Selection
MILD
DYNAMIC
USER
3. Control the desired screen conditions by pressing
the + / - button on the unit or control
the stick left/right on the remote control.
2. Select the desired menu by pressing the Ā/Ă button
on the unit or control the stick up/down
on the remote control.
1. Make display menu on the screen by pressing
the MENU button on the unit or on the remote control.
PICTURE
50
CONTRAST
40
BRIGHT
30
COLOR
TINT
25
SCREEN
WIDE
PICTURE
CONTRAST
50
BRIGHT
40
COLOR
40
TINT
25
SCREEN
WIDE
PICTURE
CONTRAST
50
BRIGHT
40
COLOR
40
TINT
25
SCREEN
WIDE
Select the one of CONTRAST/BRIGHT/COLOR/TINT and change the picture
condition as your taste.
CONTRAST/BRIGHT/COLOR/TINT
NORMAL
Select the screen conditions.
Whenever press the APC button, display condition will be changed as below;
APC (Auto Picture Control)
Picture Control
The screen will be the
standard 4:3 ratio.
/03."-
ö Each Mode will be displayed as below;
8*%&
PICTURE
CONTRAST
50
BRIGHT
40
COLOR
40
TINT
25
SCREEN NORMAL
PICTURE
CONTRAST
50
BRIGHT
40
COLOR
40
TINT
25
SCREEN
WIDE
The screen will be magnified
to the ratio of 4:3 on the left
and right sides.
3. Control the desired SCREEN mode by pressing
the + / - button on the unit or control
the stick left/right on the remote control.
2. Select the SCREEN Menu by pressing
the Ā/Ă button on the unit or control
the stick up/down on the remote control.
1. Make display the menu on the screen by pressing
the MENU button on the unit or on the remote control.
PICTURE
CONTRAST
50
BRIGHT
40
COLOR
40
TINT
25
SCREEN
WIDE
3. Control the Audio quality by pressing
the + / - button on the unit or control
the stick left/right on the remote control.
2. Select the desired menu by pressing
the Ā/Ă button on the unit or control
the stick up/down on the remote control.
1. Make display the menu on the screen by pressing
the MENU button on the unit or on the remote control.
BASS/TREBLE/BALANCE/LOUDNESS
B
B
T
B
AUDIO
BASS
TREBLE
BALANCE
LOUDNESS
AUDIO
BASS
TREBLE
BALANCE
LOUDNESS
AUDIO
BASS
TREBLE
BALANCE
LOUDNESS
AUDIO Menu can control the audio quality by select and control the one of
BASS/TREBLE/BALANCE/LOUDNESS menu.
SCREEN
Select the desired screen modes as your taste.
Volume Control
Picture Control
4
+2
0
ON
4
0
0
ON
0
+7
0
ON
4. To turn off the SETUP menu, press the
3. Use the button to find desired items.
2. To bring up the SETUP menu , press the
1. Press the STOP button, if the disc plays.
button again.
button.
When the
button is pressed, the monitor screen shows
the setup menu as shown below. Select a menu category to modify according to
individual preference.
You can easily modify setup information on the setup menu.
When this symbol appears, it indicates that an invalid button has been pressed.
There are some differences between real functions and functions in manual.
An invalid button press.
ÿSetup Menu-Main Page
DVD Setup
Use this option to set the OSD language.
When selected, change to set the on-screen display
language.
3. OSD Lang
Off : When selected, no angle mark is shown on
the screen.
On : When selected, the screen will be shown with
angle mark.
You can set up so that the angle mark appears on
scenes.
2. Angle Mark
Caution
This option is available only when the disc has the function.
PS
On
ENG
On
On
On
On
Off
PS
On
ENG
On
On
On
Set OSD Language
TV Display
Angle Mark
OSD Lang
Captions
Screen Saver
Last Memory
English
䬨䉭
General Setup Page . .
Set Angle Mark
. .
Normal/PS
Normal/LB
Wide
General Setup Page . .
TV Display
Angle Mark
OSD Lang
Captions
Screen Saver
Last Memory
. .
Set TV Display Mode
PS
On
ENG
On
On
On
General Setup Page . .
TV Display
Angle Mark
OSD Lang
Captions
Screen Saver
Last Memory
. .
WIDE 16:9 WIDE SCREEN
Choose this setting if your DVD Player is connected to a widescreen TV.
(This option is available only if the disc has a 16:9 display aspect ratio.)
/03."--#-&55&3#09
Choose this setting if you want to see movies in their original aspect ratio.
(The movie might appear with black bars at the top and bottom of the screen.)
NORMAL / PS 4:3 PAN & SCAN
Choose this setting if you want the movie to fill the entire screen.
(This might mean that the left and right edges won't be seen)
You can select a TV screen aspect ratio according to your TV.
If the TV on which the movie is played "WIDE type, choose "WIDE". If it is of
"4:3" type, choose NORMAL/PS(Pan & Scan) or NORMAL/LB(Letter BOX).
1. TV Display
ÿGeneral Setup Page
DVD Setup
On
Off
On
Off
STR
Stereo
L-Mono
R-Mono
Mix-Mono
Dual Mono (1 + 1) Setup
Dual Mono
Dynamic
Dolby Digital Setup . .
Set DRC Off
STR
Dolby Digital Setup . .
Dual Mono
Dynamic
. .
OFF
1/4
1/2
3/4
FULL
Use this function to change the setting
from the factory. - Preset Off position.
Use this function to set the input audio
signal to fit into the speaker.
. .
Dynamic
Dual Mono
Stereo
L-Mono
R-Mono
Mix-Mono
Dual Mono (1 + 1) Setup
STR
Dolby Digital Setup . .
Go To Dolby Digital Setup
. .
PS
On
ENG
On
On
On
Set Last Memory State
TV Display
Angle Mark
OSD Lang
Captions
Screen Saver
Last Memory
Dual Mono
Dynamic
Audio Setup Page . .
PS
On
ENG
On
On
On
General Setup Page . .
Screen Saver
. .
On
Off
General Setup Page . .
TV Display
Angle Mark
OSD Lang
Captions
Screen Saver
Last Memory
. .
Closed Caption
PS
On
ENG
On
On
On
General Setup Page . .
TV Display
Angle Mark
OSD Lang
Captions
Screen Saver
Last Memory
. .
Dolby Digital Setup
Equaliser
. .
1. Dolby Digital Setup
ÿ Audio Setup
Adjust last memory selection.
when start your car or turn on/ off the DVD player,
search the latest played scene.
When eject and close the disc, this function
is not working.
6. Last Memory
The screen saver is useful to prevent your display
from becoming damaged. The screen saver picture
appears when you leave the DVD player in stop mode
for about two minutes.
5. Screen Saver
On : Choose this setting to display captions.
Off : Choose this setting to close captions.
Adjust caption selection.
4. Captions
DVD Setup
Audio Setup Page . .
This function is enhanced at high levels without
distorting other frequencies.
Treble Boost
This function is more enhanced at low levels without
distorting other frequencies.
Super Bass
This Function is enhanced at low levels without
distorting other frequencies.
Bass Boost
This unit can produce a 3D surround effect, using 3D
Surround Sound technology.
Choose the desired preset equalizer mode.
(None, Rock, Pop, Live, Dance. Techno. Classic, Soft)
EQ Type
Go To Equalizer Page
Dolby Digital Setup
Equaliser
Equalizer
. .
2. Equalizer
DVD Setup
Treble Boost
None
Off
Off
Off
On
Off
Equalizer Page . .
EQ Type
Bass Boost
Super Bass
Treble Boost
. .
Super Boost
None
Off
Off
On
Off
Off
Equalizer Page . .
EQ Type
Bass Boost
Super Bass
Treble Boost
. .
Bass Boost
None
Rock
Pop
Live
Dance
Techno
Classic
Soft
None
Rock
Pop
Live
Dance
Techno
Classic
Soft
None
Off
On
Off
Off
Off
Equalizer Page . .
EQ Type
Bass Boost
Super Bass
Treble Boost
. .
Select Equalizer Type
None
Off
Off
Off
Equalizer Page . .
EQ Type
Bass Boost
Super Bass
Treble Boost
. .
Select Equalizer Type
None
Off
Off
Off
Equalizer Page . .
EQ Type
Bass Boost
Super Bass
Treble Boost
. .
High
Medium
Low
High
Medium
Low
Brightness
Brightness ญญญญญญญญญญญญญญUUUUUUUUUUUUUUGW
Contrast
Low
00
00
None
00
00
1 T
Video Quality Setup . .
Sharpness
Brightness
Contrast
Gamma
Hue
Saturation
Luma Delay
. .
Contrast
Contrast ญญญญญญญญญญญญญญญUUUUUUUUUUUUUUGW
Control the contrast of picture conditions.
After select menu, press the control
and move left/right to control the picture conditions.
Contrast
Brightness
Low
00
00
None
00
00
1 T
Video Quality Setup . .
Sharpness
Brightness
Contrast
Gamma
Hue
Saturation
Luma Delay
. .
Control the brightness of picture conditions.
After select menu, press the control
and move left/right to control the picture conditions.
Brightness
Sharpness
Low
00
00
None
00
00
1 T
Video Quality Setup . .
Sharpness
Brightness
Contrast
Gamma
Hue
Saturation
Luma Delay
. .
Control the sharpness of picture conditions.
After select menu, press the control
and move left/right to control the picture conditions.
Sharpness
Sharpness
Low
00
00
None
00
00
1 T
Video Quality Setup . .
Go To Video Quality Setup Page
. .
Sharpness
Brightness
Contrast
Gamma
Hue
Saturation
Luma Delay
Video Setup Page . .
Quality
. .
1. Quality
ÿ Video Setup Page
DVD Setup
Low
00
00
None
00
00
1 T
High
Medium
Low
None
Low
00
00
None
00
00
1 T
Hue
Hue ญญญญญญญญญญญญญญญญUUUUUUUUUUUUUUUUUUUUW
Low
00
00
None
00
00
1 T
Select the Luma Delay menu and select the
preferred video image quality.
Luma Delay
Saturation
Sharpness
Brightness
Contrast
Gamma
Hue
Saturation
Luma Delay
Video Quality Setup
Luma Delay
Sharpness
Brightness
Contrast
Gamma
Hue
Saturation
Luma Delay
Low
00
00
None
00
00
1 T
0 T
1 T
Video Quality Setup
Saturation
Saturation ญญญญญญญญญญญญญญUUUUUUUUUUUUUUUW
Control the saturation of picture conditions.
After select menu, press the control
and move left/right to control the picture conditions.
Saturation
Hue
Sharpness
Brightness
Contrast
Gamma
Hue
Saturation
Luma Delay
Video Quality Setup
Control the color level of picture conditions.
After select menu, press the control
and move left/right to control the picture conditions.
Hue
Gamma
Sharpness
Brightness
Contrast
Gamma
Hue
Saturation
Luma Delay
Video Quality Setup
Control the gamma of picture conditions.
After select menu, press the control
and move left/right to control the picture conditions.
Gamma
DVD Setup
On
Off
. .
Use the subtitle language menu to select the subtitle language that you prefer. If the disc you are
playing has that language available. It will display subtitles
. . Preference Page . .
in that.
English
TV Type
PAL
1) When disc is "STOP", press the SETUP button
French
PBC
On
Audio
ENG Spanish
on the remote control. (Remote control is DVD mode.)
Chinese
Subtitle
Disc Menu
ENG Japanese
2) Select Preference Page by moving left/right
Korean
Parental
the control stick on the remote control.
Country Region USA
Russian
Default
Thai
3) Select Subtitle by moving up/down the control stick
Preferred Subtitle Language
on the remote control.
4. Subtitle
Use the audio language menu to select the subtitle language that you prefer. If the disc
you are playing has that language available, it will display
subtitles in that language.
. . Preference Page . .
1) When disc is "STOP", press the SETUP button
PAL
English
TV Type
French
PBC
On
on the remote control. (Remote control is DVD mode.)
ENG Spanish
Audio
Chinese
Subtitle
2) Select Preference Page by moving left/right
Disc Menu
ENG Japanese
the control stick on the remote control.
Parental
Korean
Country Region USA
Russian
3) Select Audio by moving up/down the control stick
Default
Thai
on the remote control.
Preferred Audio Language
4) Press the control stick.
5) Select the Audio Language by moving up/down the control stick on the remote control.
3. Audio
. . Preference Page
1) When disc is "STOP", press the SETUP button
TV Type
PAL
PBC
On
on the remote control. (Remote control is DVD mode.)
Audio
ENG
2) Select Preference Page by moving left/right the control
Subtitle
Disc Menu
ENG
stick on the remote control.
Parental
Country Region USA
3) Select PBC by moving up/down the control stick
Default
on the remote control.
Set PBC State
4) Press the control stick.
5) Select on/off by moving up/down the control stick on the remote control.
This feature is only available when a (Super) Video CD is loaded. It allows you to disable
or enable the PBC(Play Back Control)menu of VCD discs.
2. PBC
Choose a proper color television system for your Region(country).
Default setting is "NTSC"
1) When disc is "STOP", press the SETUP button
. . Preference Page . .
TV Type
PAL
PAL
on the remote control. (Remote control is DVD mode.)
Multi
PBC
On
Audio
ENG NTSC
2) Select Preference Page by moving left/right
Subtitle
the control stick on the remote control.
Disc Menu
ENG
Parental
3) Select TV Type by moving up/down the control stick
Country Region USA
Default
on the remote control.
Set TV Standard
4) Press the control stick.
5) Select the desired TV Type by moving up/down the control stick on the remote control.
1. TV Type
This Menu is not available when play the disc.
ÿ Preference Page
DVD Setup
. .
. . Preference Page . .
1) When disc is "STOP", press the SETUP button
TV Type
PAL
China
PBC
On
on the remote control. (Remote control is DVD mode.)
Audio
ENG France
2) Select Preference Page by moving left/right
Hongkong
Subtitle
Disc Menu
ENG Japan
the control stick on the remote control.
Taiwan
Parental
GBR
Country Region USA
3) Select Country Region by moving up/down the control
Default
USA
stick on the remote control.
PG Country Region Gods
4) Press the control stick.
5) Select the desired Contru Region by moving up/down the control stick on the remote control.
Use this menu function to change the COUNTRY REGION.
7. Country Region
Preference Page
1) When disc is "STOP", press the SETUP button
1 KID SAF
TV Type
PAL
2 G
PBC
On
on the remote control. (Remote control is DVD mode.)
ENG 3 PG
Audio
2) Select Preference Page by moving left/right
4 PG 13
Subtitle
Disc Menu
ENG 5 PGR
the control stick on the remote control.
Parental
6 R
Country Region USA
7 NC17
3) Select Parental by moving up/down the control stick
Default
8 ADULT
on the remote control.
Set Parental Control
4) Press the control stick.
5) Select Parental level by moving up/down the control stick on the remote control.
. .
The Parental feature is a rating limit system, like movie ratings. It works with DVD's that have
been assigned a rating. This option lets you determine how your player will react to discs that
contain movies that are rated (in the U.S.A., the Motion Pictures Association of America rates
movies as G, PG, PG-13, ect.). You decide which ratings require a password and which
ones don't.
6. Parental
Use the Disc Menu option to select the language you want a DVD's disc menu to be
displayed in (not the same as the player menu)
. . Preference Page . .
1) When disc is "STOP", press the SETUP button
English
TV Type
PAL
on the remote control. (Remote control is DVD mode.)
French
PBC
On
Audio
ENG Spanish
2) Select Preference Page by moving left/right
Chinese
Subtitle
Disc Menu
ENG Japanese
the control stick on the remote control.
Korean
Parental
3) Select Disc Menu by moving up/down the control
Russian
Country Region USA
Thai
Default
stick on the remote control.
Preferred Menu Language
4) Press the control stick.
5) Select Disc Menu by moving up/down the control stick on the remote control.
5. Disc Menu
4) Press the control stick.
5) Select the desired subtitle language by moving up/down the control stick
on the remote control.
DVD Setup
Change Password
On
Change
Password Setup Page . .
Password Mode On
Password
. .
OK
Confirm PWD
New Password
Old Password
1) Select "Password Setup"sub item.
2) Enter your old password, and new password in 6 digits.
(The default password code is 000000)
3) Re-enter new password for confirmation then press the
2. Password Change
Password Mode
On
Off
Password Setup Page . .
Password Mode On
Password
. .
1. Password Mode
ÿ Password Setup Page
button.
An invalid button press.
[MP3]
Changes the audio output type.
(If the loaded disc supports available audio type)
[VCD] / [AUDIO]
Change the audio output type.
(If the loaded disc supports available audio type)
[DVD]
AUDIO
PLAY
4UFSFP
.POP-FGU
.POP3JHIU
.JY.POP
4UFSFP
.POP-FGU
.POP3JHIU
.JY.POP
CONDITION
$IBOOFM
$IBOOFM
CONDITION
pause
Play Disc
CONDITION
Mute Off
Mute
CONDITION
OSD
"$$)&OHMJTI
"$$)&OHMJTI
PAUSE
OSD
Use this button to select a particular scene or play the
disc. Most DVD discs will play automatically.
OSD
Mute off
Mute
OSD
[DVD] / [AUDIO] / [MP3]
PLAY OR PAUSE
Each press of the MUTE button changes the play mode.
MUTE
To adjust the audio output level of the speaker from 0 to 20.
(The volume cannot be adjusted in the AV mode.)
VOL+ / VOL-
Each press of the EJECT button changes the play mode as the text to the right illustrates.
When you insert your DVD disc into the DVD player, "DISC LOADING" will appear
on the screen. Then the DVD disc is played automatically.
EJECT
8. Default
If user selects reset from the setup menu, all the value of setup menu will be initialized
by factory setting value. (Exception: Parental level, Region code and Password values
will not be changed)
. . Preference Page . .
1) When disc is "STOP", press the SETUP button
TV Type
PAL
on the remote control. (Remote control is DVD mode.)
PBC
On
Audio
ENG
2) Select Preference Page by moving left/right the control
Subtitle
Disc Menu
ENG
stick on the remote control.
Parental
Country Region USA
3) Select Default by moving up/down the control stick
Default
Reset
on the remote control.
Load Factory Setting
4) Press the control stick.
5) Select Reset by moving up/down the control stick on the remote control.
DVD Functions
DVD Setup
1 5JNF
Stop
OSD
[AUDIO]
An invalid button press.
[AUDIO] / [MP3]
The menu of a DVD disc varies.
The content of the menu on the screen is dependent on the particular DVD.
[DVD]
MENU
Use to set various functions according to your individual preference.
SETUP
After pressing STOP button, select the desired folder and set the condition by pressing
ENTER button.
[MP3]
An invalid button press.
4UPQ
CONDITION
%JTD4UPQ
4UPQ
CONDITION
When display the DVD in ZOOM mode, can change the screen position by using
ARROW button.
[DVD]
ARROWS
Press the STOP button and stop the Disc.
And then Press the Play/Pause button and
will display the first file of the Disc.
[MP3]
OSD
Press the STOP button and stop the movie.
1 5JNF Press Play Key To Continue
And then Press the Play/Pause button and will
2 5JNF
Stop
display the last scene of the movie.
Press the Stop button two times and stop
the movie. And then Press the Play/Pause button
and will display the first scene of the movie.
[DVD] / [AUDIO]
STOP
DVD Functions
CONDITION
No sign
Left display time
Display time
You can select a track in the folder by
pressing the corresponding number button.
[MP3]
You can select a track by pressing the
corresponding number button.
[AUDIO]
CONDITION
Select track no
OSD
Select track no
__ :__
CONDITION
OSD
Select Track : _ _
The 0 through 9 number buttons are used to enter the number of the track, the number
of the DVD chapter, time data, etc.
[DVD]
NUMBER BUTTONS
Display Off
Single Remain
Single Elapsed
OSD
Your DVD player will display the counter
automatically when you play the MP3 disc.
Display the total remain
[MP3]
Total Remain
Display the single remain
Display the total elapsed
Whenever press the button, title chepter
will be displayed as follows:
No sign
Display the Chapter Elapsed
CONDITION
Display the single elapsed
[VCD]
Display Off
Chapter Remain
Total Elapsed
Single Remain
Display the left title
Display title and chapter
Title Remain
Chapter Elapsed
OSD
Single Elapsed
CONDITION
Display title and chapter
OSD
Each press of the display button displays
information about the current CD on the
screen as follows:
[AUDIO]
Title 00/00 Chapter 000/000
Each press of the button DISPLAY on the
remote control changes the play mode as
follows:
[DVD]
DISPLAY
DVD Functions
An invalid button press.
[AUDIO] / [MP3]
slow forward play : press slow button.
slow rewind play : press slow button and forward button
again. (not in work VCD)
Used to play a disc in slow forward or slow reverse.
This allows you to search forward three steps to reverse
three steps to reverse three steps.
[DVD] / [VCD]
SLOW
An invalid button press.
[AUDIO] / [MP3]
Used to display the title menu of the loaded DVD disc.
(This function is disc-dependent.)
[DVD]
TITLE
[AUDIO] / [MP3]
An invalid button press.
play
4X slow rewind
SR 4X
PLAY
2X slow rewind
16X slow rewind
16X slow forward
SF 16X
SR 2X
SR 16X
8X slow forward
SF 8X
8X slow rewind
4X slow forward
SF 4X
SR 8X
2X slow forward
CONDITION
SF 2X
OSD
This button is used to select the language for on-screen display messages.
(The title menu is different, depending on the particular DVD.)
[DVD]
SUBTITLE
DVD Functions
2X rewind search
4X rewind search
8X rewind search
16X rewind search
32X rewind search
play
FR 2X
FR 4X
FR 8X
FR 16X
FR 32X
PLAY
PLAY
FR 32X
FR 16X
32X rewind play
QMBZ
16X rewind play
32X rewind play
QMBZ
FR 16X
FR 32X
16X foward search
32X foward search
play
FF 16X
FF 32X
PLAY
4X foward search
2X foward search
8X foward search
4X
2X
8X
FF
FF
FF
CONDITION
4X foward play
32X foward play
play
FF 32X
PLAY
4X foward play
4X foward play
2X foward play
FF 16X
4X
2X
8X
FF
FF
FF
Each press of the FF button changes
the play mode as follows:
OSD
CONDITION
[MP3]
32X foward play
play
PLAY
FF 32X
8X foward play
16X foward play
8X
FF 16X
FF
4X
4X foward play
2X foward play
FF
CONDITION
2X
OSD
FF
Each press of the FF button changes
the play mode as follows:
OSD
[AUDIO] / [VCD]
Each press of the FF button changes
the play mode as follows:
PLAY
8X rewind play
16X rewind play
FR 8X
4X rewind play
2X rewind play
FR 4X
CONDITION
OSD
FR 2X
Each press of the FR button changes
the play mode as follows:
[MP3]
4X rewind play
8X rewind play
2X rewind play
FR 4X
FR 8X
CONDITION
OSD
FR 2X
[DVD]
FAST FORWARD SEARCHING
CONDITION
Each press of the FR button changes
the play mode as follows:
OSD
[AUDIO] / [VCD]
Each press of the FR button changes
the play mode as follows:
[DVD]
FAST REVERSE SEARCHING
DVD Functions
An invalid button press.
[MP3]
Press this button to repeat the selected segment.
The selected segment will be repeated
automatically until canceled.
[DVD] / [VCD] / [AUDIO]
REPEAT A-B
Used to move to the next track from the current track.
[AUDIO] / [MP3]
Used to move to the next chapter from the current chapter.
[DVD] / [VCD]
NEXT
Used to move to the previous track.
A B
A
OSD
CONDITION
ending point repeat function
start point of repeat
[MP3]
Select "ON" for watching other camera angle.
(This button con't control the preseted camera angle.)
ANGLE
Select the NTSC/PAL in condition of DVD mode.
NTSC/PAL
repeat off
all
repeat single
CONDITION
all
random play
single play
Random
Single
repeat folder one time
Shuffle
Forder
single
repeat forder
Repeat Forder
CONDITION
Repeat One
OSD
Use to change the play mode.
Each press of the REPEAT button changes
the play mode as follows:
all
All
An invalid button press.
[VCD]
All
repeat title
Title
repeat off
Track
repeat chapter
Chapter
OSD
Each press of the REPEAT button changes
the play mode as follows:
Used to move to the previous chapter from the current chapter.
CONDITION
[DVD]
[DVD] / [VCD]
OSD
Each press of the REPEAT button changes
the play mode as follows:
REPEAT
PREV
[AUDIO] / [MP3]
[AUDIO]
DVD Functions
DVD Functions
Watch play time.
Time Display
Sets the repeat play.
Repeat
Chapter time.
CH Time
Total time.
TT Time
Watch the different view angle.
"OHMF
Select the desired subtitle.
Subtitle
Selects the desired audio output.
Audio
Move to the desired chapter.
Chapter
Move to the desired title.
Title
Title
Chapter
Audio
Subtitle
Menu
Bitrate 31 llllll
When Watching DVD available to control the Menu.
GOTO
An invalid button press.
[VCD] / [AUDIO] / [MP3]
Each press of the ZOOM button changes
the play mode as the text to the right illustrates.
[DVD]
ZOOM
Title Elapsed 0:20:02
01/02
06/61
5.1CH English
korean
;00.Y
9
0GG
;00.Y
;00.Y
9
;00.Y
9
9
;00.Y
;00.Y
9
CONDITION
9
OSD
OSD
You can turn the PBC (Play Back Control) function on or off by pressing this button.
When PBC is loaded, the PBC function is enabled automatically. This function is similar
as selection of DVD title. (not available with MP3)
[VCD]
An invalid button press.
[DVD] / [AUDIO] / [MP3]
PBC
DVD Functions
DOOR
TRIGGER
(+,-)
GROUND (Blue)
ACC (Red)
B+ (Yellow)
GROUND (Black)
GAME
NOISE
FILTER
AV Input (AV 2)
Yellow
White
Rde
VIDEO AUDIO (L) AUDIO (R)
CAMCORDER
AV Output
AV Input (AV 1)
Yellow
White
Red
Yellow VIDEO
Red AUDIO (R)
White AUDIO (L)
Connection Diagram
MONITOR
AMP
CAMCORDER
GAME
UNIT
4$3&8"
SCREW
4$3&8#
4. Tighten the unit with the supplied
8 screws(screw B).
3. Match the position of installation bracket and
installation plate with 8 screws(screw A).
2. Connect the external devices RCA cable or AV ouptut.
(refer the connection diagram))
INSTALLATION PLATE
1. Unpack the color box and check the contents.
Installation
GROUND (Blue)
ACC (Red)
B+ (Yellow)
GROUND (Black)
FM
TV
NOISE
FILTER
AV Input (AV 2)
Yellow VIDEO
Red AUDIO (R)
White AUDIO (L)
CAMCORDER
Yellow VIDEO
AV Output
‫޵ڋ‬
่আ
ऱԳ
Red AUDIO (R)
White AUDIO (L)
AV Input (AV 1)
Connection Diagram (TV/FM)
Optional Specification
MONITOR
AMP
CAMCORDER
GAME
GAME
఼࣭
ࠤࡦ಺
ADD : Add the channels that not in the memorized channels.
DEL : Delete the channels that in the memorized channels.
2. Select add or delete the channels by pressing the MENU (ADD/DEL)
on the remote control.
1. Select the channels as you want by pressing the 0~9 buttons or
Ā
Ā/Ă button on the remote control.
How To Select and Delete Channels by Manual Use to add or delete the
channel as your taste.
How To Select and Delete Channels by Manual
ö If you want to skip the Auto channel select, press whichever button
on the remote control.
2. After finishing the search channels, select channel as your taste.
ö Channel may not be selected in a bad RF signal region.
ö Press the APC(A.MEMO) on the remote control after switching the DVD mode
on the remote control.
1. Press the APC (A.MEMO) on the remote control to select all available
channels automatically.
How To Select Channels Automatically
2. Select the TV mode by pressing
the MODE button on the unit or on the
remote control.
1. Install the TV module on the product.
Please check the Connection Diagram
on the manual.
TV Mode
Watching TV is optional function and needs additional cost. If you want to install
this function, please contact with the closest install shop or regional dealer.
1. How to watching TV
Optional Specification
ex : If you want to select 29 channel,
ྙ When press the number "2" on the remote control, display the "2-" on the
right edge of monitor screen.
ྚ Press number "9", and then switch the channel "29".
Select the desired channels by pressing the 0~9 number button on the
remote control.
3. Press Number buttons
Select the channel and move one step manually.
Select the desired channel by pressing the up/down button on the unit or move
the control stick on the remote control.
2. Channels select on the SEARCH mode.
Display the TV channels only the memorized channels.
Select the desired channel by pressing the Ā/Ăbutton on the unit or move the
control
on the remote control.
1. Channels select on the SKIP mode.
Channel Mode Setting
Optional Specification
FM
T
B
FM
T
B
FM
T
B
FM TX
AUDIO
BASS
TREBLE
BALANCE
LOUDNESS
FM TX
AUDIO
BASS
TREBLE
BALANCE
LOUDNESS
FM TX
AUDIO
BASS
TREBLE
BALANCE
LOUDNESS
89.0
+7
+7
0
ON
88.8
+7
+7
0
ON
88.8
+7
+7
0
ON
ö When FM TX is not installed or not working, you can hear the sound through
IR headphone. (IR headphone is optional items)
4. After setting the Radio frequency, control the radio volume.
3. Select the Radio frequency from 88.0Mhz~89.2Mhz
by pressing the + / - button on the unit or control
the stick left/right on the remote control.
2. Select the FM TX Menu by pressing
the Ā/Ă button on the unit or control
the stick up/down on the remote control.
1. Make display the menu on the screen by pressing
the MENU button on the unit or on the remote control.
Listening to the audio portion of the disk through your automotive speakers.
2. FM TX
Optional Specification
Wipe softly with a wet cloth and then with a dry one.
Before playback, wipe the disc outward from the center with a clean cloth.
Do not use any type of solvent such as thinner, benzene, commercially-available cleaners
or antistatic spray.
To avoid damaging your DVD player, don't use a scratched disc.
Caution
Don't touch the shiny side of the disc (the side with the embedded information).
Don't stick a label or a glue-based note on either side of the disc. Don't use discs
that have glue or a damaged gluey label-it might result in damage to your DVD player.
Don't put discs in the sunshine. Park your car in the shade.
How to handle the disc
This product incorporates copyright protection technology that is protected by methods
claims of certain U.S. patents and other intellectual property rights owned by the
Macrovision Corporation and other rights. Owner's use of this copyright protection
technology must be authorized by the Macrovision Corporation, and is intended for
home and other limited viewing uses only unless otherwise authorized by the Macrovision
Corporation.
Copyright protection
1 : North America
2 : Japan
3 : Korea and Southeast Asia
4 : Australia, Mid & South America
5 : Russia
6 : China
Your DVD player is designed and manufactured to region management information that
is recorded on a DVD disc. Please check the region code.
Region code
DVD-RW, DVD-REM, CD-ROM, CD-EXTRA discs cannot be played on this unit. Also,
a CD or a CD-RW which was recorded on special software cannot be played.
Discs that cannot be played
DVD discs provide high-resolution images with high-quality sound and surround sound
effects. This DVD player can play not only DVD discs of various versions, but also
S-VCD, VDC, audio CD and MP3 discs. Each disc plays only the information saved on
it, and some functions cannot be utilized.
DVD features
Disc Information
Point the remote control to the remote sensor of the
product.
Use the remote control within 5m.
Remove the obstacle.
Replace with new batteries.
Is the distance too far?
Is there any obstacle in the middle?
Is the battery exhausted?
Cancel the parental function or change the parental
level.
Is the rating level correct?
Is the remote control facing
at the remote sensor?
Clean the disc.
Press the function selection button to close the
menu screen
Is the menu displayed on the monitor?
Insert a disc with the playback side down.
Is the disc put upside down?
Is the disc contaminated with dust?
Insert the compatible disc. (Check disc type, color
type and area code)
Is the disc incompatible?
1. Remove the disc from the DVD player.
2. Turn on the power and leave it on for an hour to vaporize the condensation.
3. You can operate the DVD player without any problems.
When a disc is brought from a cold environment to a hot one, there may be steam on the
face of the disc, or water will appear on the pickup lens. It will be affected disc play.
Check point
Remote control does
not work properly.
No playback
Connect the video cable correctly.
Turn the monitor power on.
Is the video cable connected correctly?
Is the monitor powered on?
Set the Digital Audio Output to the correct position,
and then turn on the DVD player again by pressing
the POWER button.
Is the digital audio output set
in the correct position?
Select the proper video input mode in the monitor
and check to see if the DVD playback screen is
displayed on the monitor.
Turn on the monitor connected with the audio
cable.
Is the monitor which is connected
with the audio cable turned on?
Is the monitor set to receive
the DVD signal output?
Connect the audio cable into the jacks securely.
Is audio cable is connected securely?
No picture
Select the correct input mode for the audio receiver.
Is the audio which is connected with
the audio cable set to receive
the DVD signal output?
Actions to be Taken
Check the car battery capacity.
No sound
Items to Check
Is the power turned on?
Button does not work.
Symptom
Troubleshooting
Yes
3FNPUF$POUSPM
Note : This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the
interference at his own expense.
14.96"(W) x 14.96"(D) x 2.55"(H)
Yes
*35SBOTNJUUFS
%JNFOTJPO
12" Wide
1 EA
"70VUQVU
4DSFFO4J[F
2 EA
"7*OQVU
NTSC / PAL Auto Selection
350 cd/̅
#SJHIUOFTT
$PMPS4ZTUFN
800(RGB) X 480 Pixel
16 : 9
DC 12V
3FTPMVUJPO
4DSFFO'PSNBU
1PXFS
Specifications
">