NFC PAD (DE-632)
Product specification
DUALi Inc.
Document Version: 1.00
Last Revised Date: 14
th
JAN. 2014
Copyright ⓒ
2014 DUALi Inc. All rights reserved. You are strictly prohibited to copy, disclose, distribute, or use this document in part or as a whole for any purposes other than those for which this document is disclosed. This document is copyrighted and contains confidential information and other intellectual property rights of DUALi Inc.
Any unauthorized use, copy, disclosure or distribution constitutes infringement of DUALi’s intellectual property rights.
NFC PAD Specification
DUALi Inc. reserves the right to make changes to its applications or services or to discontinue any application or service at any time without notice. DUALi provides customer assistance in various technical areas, but does not have full access to data concerning the use and applications of customer's products.
Therefore, DUALi assumes no liability and is not responsible for customer applications or software design or performance relating to systems or applications incorporating DUALi products. In addition, DUALi assumes no liability and is not responsible for infringement of patents and/or any other intellectual or industrial property rights of third parties, which may result from assistance provided by DUALi.
Composition of the information in this manual has been done to the best of our knowledge.
DUALi does not guarantee the correctness and completeness of the details given in this manual and may not be held liable for damages ensuing from incorrect or incomplete information. Since, despite all our efforts, errors may not be completely avoided, we are always grateful for your useful tips.
We have our development center in South Korea to provide technical support. For any technical assistance can contact our technical support team as below;
Tel: +82 31 213 0074 e-mail : [email protected]
FeliCa
Mifare
®
™
is registered trademark of SONY Corporation.
is registered trademarks of NXP Semiconductors
㈜듀얼아이 2/12
Revision History
2014.01.14 (Ver. 1.0) : First release
㈜듀얼아이
NFC PAD Specification
3/12
NFC PAD Specification
CONTENTS
1 INTRODUCTION ..............................................................................................................................5
1.1
P
RODUCT SPECIFICATION
..............................................................................................................5
1.2
RF PART S
PECIFICATION
.............................................................................................................6
1.3
SAM PART S
PECIFICATION
..........................................................................................................6
2 STRUCTURE .....................................................................................................................................7
2.1
C
OMPONENTS
C
ONFIRMATION
......................................................................................................7
2.2
T
HE BLOCK DIAGRAM OF
NFC PAD........................
오류 !
책갈피가 정의되어 있지 않습니다 .
2.3
D
ESCRIPTION
.................................................................................................................................7
3 EXTERIOR.........................................................................................................................................8
3.1
P
RODUCT EXTERIOR
......................................................................................................................8
3.2
P
RODUCT DIMENSION
....................................................................................................................8
6
7
4 POWER & INTERFACE SPECIFICATION..................................................................................9
4.1
P
OWER
S
PECIFICATION
..................................................................................................................9
4.2
C
URRENT CONSUMPTION
...............................................................................................................9
4.3
C
OMMUNICATION
S
PECIFICATION
.................................................................................................9
5 FUNCTIONS ....................................................................................................................................10
5.1
C
ARD DETECTION
........................................................................................................................10
5.2
F
IRMWARE DOWNLOAD FUNCTION
..............................................................................................10
5.3
O
PERATION
.................................................................................................................................10
5.4
S
TORAGE
.....................................................................................................................................10
WARNING AND NOTICE..............................................................................................................11
WARRANTY & SERVICE .............................................................................................................12
㈜듀얼아이 4/12
NFC PAD Specification
1 Introduction
NFC PAD is contactless reader meets high security requirement and the latest contactless standard. It supports Mastercard® Paypass, Visa ® Paywave with contactless EMV complaint. Up to 8SAMs (Secure Access Modules) come standard for payment system.
Also it gives user multiple connectivity such as USB, RS-232 & TCP/IP (option).
It is adopted secure communication comply with Master & Visa.
ITEM Specification Note
CPU
Program Memory
STM32F103ZGT6 (ARM Cortex_M3, 144pin)
1MBytes FLASH
Up to 32Mbytes external Serial Flash
(Default : 1Mbytes)
ST
Data Memory
DISPLAY
96KBytes SRAM
Up to 4Mbytes external PSRAM
(Default : 96Kbytes)
4 Status LED (RED, BLUE, YELLOW, GREEN)
128*96 Graphic LCD (Yellow green )
4 color
Communication MINI USB 2.0 Full speed
RS-232
TCP/IP(option)
Contactless card
SAM
Input Voltage
ISO 14443 A/B,
Class A,B, T=0,T=1
Adapter DC 5V
Reading Distance
: Maximum 5cm
8 SAM SLOT
㈜듀얼아이 5/12
NFC PAD Specification
1.2 RF PART Specification
ITEM Specification
Radio frequency 13.56MHz
Comm. speed 106,212,424 Kbps
PN512
Note
EMV certification -106Kbps only
Input Power 5V
1.3 SAM PART Specification
ITEM Specification Note
Protocol T=0,T=1
Class class A,B (5V, 3V)
Quantity 8
㈜듀얼아이 6/12
2 Structure
NFC PAD Specification
- NFC PAD
- Comm.cable (RS-232 Cable or USB Cable)
* 5V AC adapter (option)
2.2 Description
MAIN MCU : STM32F103ZGT6 (ARM Cortex_M3, 144pin), 1Mbyts Flash,
96Kbytes SRAM
-
-
-
-
RTC : included in LCD.
Battery : Provides backup power RTC and secure memory while power is off.
RF field : Adopt PN512 chip which supports ISO 14443 A/B
Debug port : USB endpoint0 vendor protocol
-
-
-
-
Host interface: USB, RS-232, TCP/IP(option)
Buzzer : Max 94dBA, magnetic buzzer
Status LED : 4 status LED comply with EMV.
Power : Use DC5V adopter of USB(LCD brightness is weaker than adaptor).
Tamer switch : When case is opened by force, it disconnect backup power for security reason.
-
-
LCD: 128*96 graphic LCD.
Touch panel: Resistive touch panel
SAM: 8 x SAM slots(ISO7816) comm. Speed up to 153600bps
- Memory extension: designed to extend program& data memory up to
32Mbytes & 4Mbytes.
㈜듀얼아이 7/12
3 Exterior
NFC PAD Specification
125mm*90mm*27mm
㈜듀얼아이 8/12
4 Power & Interface Specification
NFC PAD Specification
DC 5V input(recommendable), USB 5V power supply(brightness is little weaker than DC 5V Adaptor)
Power usage: under 2W
Default : 5V, under 200mA
MAX : 5V, under 400mA (card read/write)
USB 2.0 FULL SPEED (12Mbps)
RS-232
TCP/IP(option)
㈜듀얼아이 9/12
5 Functions
NFC PAD Specification
Comply with EMV PCD level 1
5.2 Firmware download function
Downloadable via PC program(DeDownloader)Usage environment
5.3 Operation
Temperature: -10 ~ 60 ℃
Humidity : 30 ~ 90 % ( relative humidity )
5.4 Storage
Temperature: -20 ~ 80 ℃
Humidity: 30 ~ 90 % ( relative humidity )
㈜듀얼아이 10/12
NFC PAD Specification
6 Warning and Notice
For indoor use only.
This product is affected by an element like metal or Magnetism. So one has to take precautions.
This device is not waterproof.
Recommended to use certified (UL/CE/FCC) adaptor.
Recommended to use apart from metallic devices to maximize RF reading performance.
EU
This product is CE marked according to the provision of the R&TTE Directive (99/5/EC). Here by DUALi Inc. declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.
FCC STATEMENT
CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help.
㈜듀얼아이 11/12
NFC PAD Specification
7 Warranty & Service
Warranty and Repair service
- DUALi Inc. warrants to the original consumer or other end user that this product, DE-632, is free from defects in materials and workmanship for a period of 1 year from the date of purchase.
※ Note Warranty/non-warranty repair fees do not include any shipping charges.
The damages(defaults) prescribed below are NOT to be covered by warranty.
- User’s misuse of part/component.
- Fault by the unqualified user’s own intention of repairs.
- Product’s inspection requirement.
- Adding certain functions or extension of system.
- Fault by User’s misuse against the product’s manual.
*Please contact our service team for the technical/ sales supports.
DUALi Inc.
1-308/310 Innoplex, 552 Wonchoen-dong, Youngtong-gu,
Suwon, Gyeonggi-do, Korea (zip: 443-380)
Tel : +82 31-213-0074
Fax : +82 31-213-0078
E-mail : [email protected]
Web-site : http://www.duali.com
㈜듀얼아이 12/12
