POWERXCEL 8B037BT, BTEP 0480B, 0481W Bluetooth earphone Instruction manual

Below you will find brief information for Bluetooth earphone 8B037BT, Bluetooth earphone BTEP 0480B, Bluetooth earphone BTEP 0481W. These PowerXcel Bluetooth Earbuds are designed for listening to music and making phone calls. They have a built-in microphone, volume and media control, and connect to your devices automatically. They are compatible with any Bluetooth enabled device. The earbuds will automatically connect to the last device they were paired with when switched on. You can also pair them with a new device by following the steps outlined in the manual.

PDF

Document

POWERXCEL
8B037BT, BTEP-0480B, BTEP-0481W
Bluetooth earphone
Getting started
&laquo; Remove the product from the box.
+ Remove any packaging from the product.
&laquo; Please retain all packaging after you have checked and
counted all the parts and the contents against the list,
Package Contents
&laquo; Bluetooth Stereo Earbuds
e USB charging cable
&raquo; Instruction Manual
Do not use this unit for anything other than its intended use.
Keep the unit out of reach of children.
This product is not a toy.
Do not use the handset at excessive volume levels, as damage
to hearing may occur.
Description of Parts: 4 #
INSTRUCTIONS FOR USE
Charging Instructions
The Bluetooth Earbuds come with a built in rechargeable
battery. Before using it for the first time we recommend you
charge the battery fully. Only use the supplied USB Cord to
charge the Bluetooth Earbuds. Please charge for about 2 hours.
Connect the USB charging cable to a computer USB port and
the Micro USB plug to the charging port of the device. The Red
LED light turns on while the device is charging. It takes around
2 hours for the unit to fully charge. When the battery is fully
charged, the LED light will turn to Blue.
Earbuds will remember this device and will pair automatically
when the device's Bluetooth is activated and in range. You do
not need to re-pair any previously connected devices.
The Bluetooth Earbuds will attempt to automatically connect
to the last device it was paired with when switched on. If
you want to pair it with a new device, please follow the steps
outlined above.
Once the Bluetooth Earbuds is paired with your device the
music will transmit through the Bluetooth Earbuds. Please
refer to your device's user manual for further information.
Previous track Playing music | A short press on the -
utton will return you to
the previous track
Next track Playing music | A short press on the +
button will take you to
the next track
An indication tone will alert you when the volume is adjusted
to either minimum or maximum level.
Key Features 9 Function Summary Making a call with the Bluetooth Earbuds in Bluetooth
+ Keep earbuds together all the time i LE, A A 3 Switching on/off the device Listening to Music mode .
. Connect to any Bluetooth enables device we Press and hold the MF button for 4-6 seconds to turn ON/OFF Once the Earbuds are paired with your device you can stream Basic operation
+ Listen to music wirelessly ae the device. music wirelessly through the Bluetooth Earbuds. Should you = =
&laquo; Built-in Mic Ab encounter any problems while streaming please refer your Function Operation Button
+ Control buttons for ease-of-use = Pairing the device with Bluetooth devices (phone or music device's user manual for further information. Answer a call Incoming Call | Press the Phone button
e Built-in rechargeable battery 6 device) once to answer an
+ Answer &amp; end a call at click of a button | Ensure the device is turned off, then press and hold the MF Control Function incoming call
&laquo; Built-in Volume &amp; Media Control (pause/play) button for 4-6 seconds to turn on, and the LED flashes red and 7 7 - -
e Connects to previously connected device automatically blue. Place the Bluetooth Earbuds and Bluetooth device (phone Function Operation Button Reject a call Incoming Call | Press and hold the
or music device) so that they are no further than 3 feet apart; Increase Volume | Playing music | Press and hold the + Phone button 2-3
Safety Instructions Activate the Bluetooth function on your Bluetooth device button will increase the seconds
Keep the unit away from heat sources, direct sunlight, humidity, (phone or music device). Please refer to the manufacturer's volume End a call Incoming Call | After your phone
water and any other liquids. instructions for instructions on enabling Bluetooth on your = = conversation, short
Do not operate the unit if it has been exposed to water, Speak device. Decrease Volume | Playing music | Press and hold the - press the Phone button
moisture or any other liquids to prevent against electric shock, 1 peaker Once you have activated Bluetooth on your device, select the button will decrease the -
explosion and/or injury to yourself and damage to the unit. 2 LED Light Indicator “PX BT EARBUD” from the list of available Bluetooth devices. volume Increase Volume | During a call Long press on the
Do not use the unit if it has been dropped or damaged in any If required, enter the password’0000’to confirm &amp; finalize : : + button once wi
Way. 3 | Volume Increase (+) / Next Track pairing, Pause Playing music phort press set Mr increase the volume
Repairs to electrical equipment should only be performed by 4 | MF (Multi-Functi Phone butt Once paired successful, you would hear an indication tone and i :
a qualified electrician. Improper repairs may place the user at = u jon) /Phone button the LED flashes blue. music Decrease Volume | During a call Long Press onthe
INSTRUCTION MANUAL serious risk. o 5 | Charging port (side) You can now start to use the device. = Play Pausing Short press onthe ur decrease the volume
PLEASE READ ALL INSTRUCTIONS CAREFULLY Do not use the unit with wethands. | MN Volume Decrease (-) / Previous Track If pairing is unsuccessful, turn off the device first and then re- button will restart the
put objects into any of the openings. pair following the above steps. music
AND RETAIN FOR FUTURE USE Keep the unit free from dust, lint etc. 7 | Built-In Microphone Once you have paired the Bluetooth Earbuds with a device, the
1 2 3 4 5 6
the limits for a Class B digital device, pursuant to Part 15 of the . . . . um
Redial last Standby mode | Short press the Phone affected. FCC Rules. These limits are designed to provide reasonable defective materials or workmanship. This warranty is void if Service at [email protected] or by calling 1 (866) 815-
number and connected | button twice + Don't use abrasive cleaning solvents to clean the device. protection against harmful interference in a residential the product has been damaged by accident, in shipment, 4714, Monday to Friday 10am to 6pm ES
toadevice + Do not expose the device to extremely high or low installation. This product generates, uses and can radiate radio unreasonable use, misuse, neglect, improper service,
temperature as this will shorten the life o electronic devices, frequency energy and, if not installed and used in accordance commercial use, repairs by unauthorized personnel or other NOTE: Manufacturer cannot assume responsibility for loss
destroy the battery or distort certain plastic parts. with the instructions, may cause harmful interference to causes not arising out of defects in materials or workmanship. or damage during incoming shipment. As a precautionary
Please Note &laquo; Don't dispose of the device in a fire as it will result in an radio communications. However, there is no guarantee This warranty doesn't cover the following which may be measure, carefully package the product for shipment, and
&laquo; Not all mobile phones support all the functions listed above. explosion that interference will not occur in a particular installation. supplied with this product, including but not limited to; insure it with the carrier. Be sure to enclose the following
Please refer to your cell phones user's manual for further . Don't expose the device to contact with sharp objects as this If the product does cause harmful interference to radio or LCD Screens, glass parts, lenses, bulbs etc. This warranty is details with the product: your full name, return address and
information. will cause scratches and damage. television reception, which can be determined by turning the effective only if the product is purchased and operated in USA daytime phone number, a note describing the problem you
+ Certain functions and indication tone maybe vary + Don't let the device fall on the floor. The internal circuit might equipment off and on, the user is encouraged to try to correct and Canada, and does not extend to any units which have experienced, a copy of your sales receipt or other proof of
depending on your mobile phone. get damaged. the interference by one or more of the following measures : been used in violation of written instructions furnished by purchase to determine warranty status. C.O.D. shipments
ys + Don't attempt to disassemble the device as it may get - Reorient or relocate the receiving antenna. manufacturer or to units which have been altered or modified cannot be accepted.
LED indicator | damaged if you are not professional. - Increase the separation between the product and receiver. or, to damaged products or parts thereof which have had the
Please refer to the below tables for a list of the LED statuses _ - Connect the product into an outlet on a circuit different serial number removed, altered, defaced or rendered illegible
whilst using the Bluetooth Earbuds. Specifications from that to which the receiver is connected. WARRANTY DISCLAIMERS: This warranty isin lieu ofall
. ug er - Consult the dealer or an experienced radio/TV technician for :
Charging Indication Bluetooth specification Bluetooth 2.1+EDR help. р warranties expressed or implied and по representative or
ae avi Lac mi : erson is authorized to assume for manufacturer any other
LED indicator Status of the BT Earbuds Working time Up to 2.5 hours The device complies with Part 15 of the FCC Rules. Operation ability in connection with the sale of our products There
— is subject to the following two conditions: (1) this device may . : .
Red LED Charging Charging input voltage DC5V not cause harmful interference, and (2) this device must accept shall be re claims for defects or failure under any theory of
- пр : var : ina ort, contractor commercial law including but not limite:
Blue LED Charging Completed Charging time &lt; 2 hours any interference op eived | ncluding interference that may to, negligence, gross negligence, strict liability, breach of
Speaker Power 2x5mW Thi les with FCC radi i forth warranty and breach of contract. Under no circumstances will
LED Indication - is equiment complies wit radiation exposure limits set forth for an Manufacturers / Distributors maximum liability exceed the
Built-In Battery 60mAh uncontrolled environment. retail value of the product.
LED indicator Status of the BT Earbuds This transmitter must not be co-located or operating in conjunction with any
LED flashes red and bl Ра d other antenna or transmitter. WARRANTY PERFORMANCE: During the above 90 day |
alternately тес ANG ne ang mods (Note: Battery life &amp; charging time may vary based on usage &amp; LIMITED WARRANTY warranty period, a product with a defect will be either repaired
types of devices used.) Thi Е \ d d he original or replaced with a reconditioned comparable model (at
. Is manufacturer s product warranty extends to the origina manufacturers option). The repaired or replacement product
Care and Maintenance dations before usina th FCC Instructions consumer purchaser of the product Neither the retailer nor will be in warranty for the balance of the 90 day warranty
нь, || Changesormadicalonsnotexpeny approved by the pary || er ner on no || _pevod and an adional one month period No charge wie
the product for ma responsible for compliance could void the user's authority to р и У. applicable for such repair or replacement.
e product tor many years. operate the product. WARRANTY DURATION: All materials and workmanship are
+ Do not expose the Bluetooth Earbuds to liquid, moisture warranted to the original consumer purchaser for a period of SERVICE AND REPAIR: If service is required for this product,
or humidity to avoid the product's internal circuit being NOTE: This product has been tested and found to comply with ninety (90) days from the original purchase date. you should first contact Midwest Trading Group Customer
WARRANTY COVERAGE: This product is warranted against
7 8 9 10 11 12
">

Hello! I am an AI chatbot specifically trained to assist you with the POWERXCEL BTEP 0480B 0481W Bluetooth earphone Instruction manual. I have thoroughly reviewed the document and can help you locate the exact information you need or explain the content in clear and simple terms. Whether you’re looking for guidance on specific features, troubleshooting steps, or general usage, feel free to ask your questions. The more details you provide about your concerns or needs, the more accurately and effectively I can assist you!

Show related prompts

Assistant typing

Assistant is out of keyboard. Please, try again later.

Key features

Wireless music playback
Built-in microphone
Hands-free calling
Track skipping buttons
Built-in rechargeable battery
Automatic reconnection
Volume control
Easy pairing process

Frequently asked questions

Connect the supplied USB cable to a computer USB port and the Micro USB plug to the charging port of the device. The Red LED light turns on while the device is charging. It takes around 2 hours for the unit to fully charge. When the battery is fully charged, the LED light will turn to Blue.

Ensure the device is turned off. Press and hold the MF button for 4-6 seconds to turn on. Activate the Bluetooth function on your Bluetooth device and select "PX BT EARBUD" from the list of available Bluetooth devices. If required, enter the password "0000" to confirm and finalize pairing. Once paired successfully, you would hear an indication tone and the LED flashes blue.

The Bluetooth Earbuds and Bluetooth device should be no further than 3 feet apart for proper pairing and operation.

Press the Phone button once to answer an incoming call.

Press and hold the + button to increase the volume and press and hold the - button to decrease the volume.

User questions

Michael G.

How long do the Bluetooth Earbuds take to charge, and what are the steps for powering them on and pairing?

The Bluetooth Earbuds fully charge in approximately 2 hours. When charging, the Red LED light turns on, and it turns Blue once fully charged. To turn on the earbuds, press and hold the MF button for 4-6 seconds. For pairing with a new device, ensure the earbuds are off, then press and hold the MF button again for 4-6 seconds until the LED flashes red and blue, indicating pairing mode.

Michael G.

How to troubleshoot earbuds that fail to turn on or pair after being charged?

Check if the LED indicator has turned Blue, which signifies a complete charge (charging takes approximately 2 hours, during which the LED is Red). To power them on, press and hold the MF button for 4-6 seconds. To enter pairing mode (must be off first), press and hold the MF button again for 4-6 seconds until the LED flashes red and blue.