Bluetooth Class1 Dongle Specification Preliminary
Product Name
Product ID
GST class 1 Bluetooth Dongle
GL2BDG91
Hardware Version Rev.01
FEATURE
Comply with Bluetooth Specification V1.1
Support Bluetooth Class1
Built-in Link controller and Link Manager Protocol
HCI interface over USB
USB interface fits desktop/laptop PCs
Compliant with USB 1.1 standard.
Built-in flash memory 、 system clock .
Easy to use-makes wireless networking simple.
Easy to follow-friendly user interface provides an easy way to connect other
Bluetooth devices .
APPLICATIONS:
Notebook 、 PCs
FCC Notices
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and
(2)This device must accept any interference received, including interference that may cause undesired operation .
“FCC RF Exposure requirements:
This device and its antenna(s) must not be co-located or operation in conjunction
With any other antenna or transmitter.”
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR
TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS
EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER'S AUTHORITY
TO OPERATE THE EQUIPMENT.
1
Hardware Specification
ITEMS
Standard
Interface
Link Mode
Data Rate
Frequency Band
Compatible OS
Bluetooth Profile support
Receiving Signal Range
Operation current
Operating Distance
Output Interface
Operation Temperature
Storage Temperature
Operation Humidity
Storage Temperature
Modulation
USB Specification
Spectrum
Security Provided
Dimension
SPECIFICATION
Bluetooth V 1.1
USB(Type A)
ACL,SCO
ACL:723.2kbps/SCO:57.6kbps
2.4GHz
Microsoft Windows 98 / 2000 / ME / XP
GAP, SPP, FTP, DUN, LAP, OPP, GOEP,
SYNC, FAX, PAN, HCRP, Audio/Headset.
Better than -75dBm @ 0.1%FER
155mA(max)
Up to 70 meters
USB
-0 o C ~ +55 o C
-20 o C ~ +70 o C
0% to 70%
0% to 95% Non-condensing
GFSK(Gaussian Frequency Shift Keying)
Ver 1.1
FHSS(Frequency Hopping Spread Spectrum)
Pairing,Encryption,Authentication
59.57mm x 19.83mm x 13.86
2
GL2BDG91 Block Diagram
Pin Description (Wire to Board connector)
1 + 5V
2 D-
3 D+
4 GND
Pin Name
USB_D-
USB_D+
NO
2
3
I/O Description
Vcc
I Asynchronous serial data RTS/USB Data+
O Asynchronous serial data RTS/USB Data-
Ground
3
