HHC Changzhou Corp. 2AEQWCH10HHC005 RemoteControl User Manual

 

   

CH10

 

Remote

 

Control

 

Instructions

 

1.

    Product   Overview  

Product   Name ：             Remote   Control  

Product   Model   No.

：       CH10  

FCC   ID:                             2AEQWCH10HHC005  

 

2.

    Environment   requirement  

Operation   temperature:     +10 ℃ ~   +40 ℃ .

 

Storage   temperature:   － 10 ℃ ~65 ℃ .

 

Operating   Humidity ： 10%~80%RH ， non ‐ condensing.

 

Storage   Humidity ： 10%~   85%RH ， non ‐ condensing.

 

 

3.

  Directions   for   Operation  

3.1

  Pairing   Remote  

 

3.2

  ADJUST:  

 

 

3.3

  ONE   TOUCH   BUTTON:  

 

 

 

 

3.5

  UNDERNEATH   LED   LIGHTING  

 

5.

    Matters   needing   attention ：  

 

5.1

    The   function   will   only   work   normally   in   proper   working   power   conditions.

 

5.2

    Remote   Control   needs   three   AAA   batteries.

 

5.3

    The   control   box   is   needed   for   proper   control.

 

5.4

    If   problems   are   identified,   they   must   be   treated   by   professional   personnel.

 

 

6.

    Additional   attention   for   user ：  

6.1

  This   equipment   has   been   tested   and   found   to   comply   with   the   limits   for   a   Class   B   digital   device,   pursuant   to   part   15   of   the   FCC   Rules.

  These   limits   are   designed   to   provide   reasonable   protection   against   harmful   interference   in   a   residential   installation.

  This   equipment   generates,   uses   and   can   radiate   radio   frequency   energy   and,   if   not   installed   and   used   in   accordance   with   the   instructions,   may   cause   harmful   interference   to   radio   communications.

  However,   there   is   no   guarantee   that   interference   will   not   occur   in   a   particular   installation.

  If   this   equipment   does   cause   harmful   interference   to   radio   or   television   reception,   which   can   be   determined   by   turning   the   equipment   off   and   on,   the   user   is   encouraged   to   try   to   correct   the   interference   by   one   or   more   of   the   following   measures:  

— Reorient   or   relocate   the   receiving   antenna.

 

— Increase   the   separation   between   the   equipment   and   receiver.

 

— Connect   the   equipment   into   an   outlet   on   a   circuit   different   from   that   to   which   the   receiver   is   connected.

 

— Consult   the   dealer   or   an   experienced   radio/   TV   technician   for   help.

 

6.2

    This   device   complies   with   part   15   of   the   FCC   Rules.

  Operation   is   subject   to   the   following   two  

  conditions:   (1)   This   device   may   not   cause   harmful   interference,   and   (2)   this   device   must   accept   any   interference   received,   including   interference   that   may   cause   undesired   operation.

 

6.3

    For Intentional and unintentional radiators the manual shall caution the user and manufacturer that changes or modifications not expressly approved by the party responsible

  for compliance could void the users authority to operate the equipment.