Ideos Tablet S7

Quick Start

Contents

1 Packing list.......................................................... 1 7 Locking and unlocking the screen ......................6

2 Getting to know your Tablet ................................ 1

3 Installation........................................................... 2

3.1

To remove the back cover...................................... 2 8

7.1

7.2

To lock the screen...................................................6

To unlock the screen...............................................6

Setting date and time ..........................................6

9 Installing or removing the microSD card.............7

3.2

To install the SIM card............................................ 3

3.3

To install the battery ............................................... 3

3.4

To install the back cover......................................... 3

10

11

For more help....................................................7

Warnings and Precautions ................................8

4 Turning the Tablet on or off ................................. 4

4.1

To turn the Tablet on .............................................. 4

4.2

PIN protection ........................................................ 4

4.3

To turn the Tablet off............................................... 4

5 Charging the battery ........................................... 5

6 Using the touchscreen ........................................ 5 i

1

Packing list

The product package contains the following items.

2

Getting to know your Tablet

S7 Tablet

2 Stylus

3 Battery

If the items in the product package are not consistent with t hose in the packing list, contact the vendor. The figures and operation descriptions in this guide are provided only for reference, see the actual product for details.

1

1

2

3

4

Ambient light sensor

Home key

Menu key

Back key

6 microSD card slot

8 Microphone

9 End key

11

12

Micro USB interface

OFN (Optical Finger Navigation) key

13 Call key

14 Speaker

23

22

17 Power key

18 Bracket

21 Volume Up/Down key

22 Speaker

3

Installation

3.1

To remove the back cover

To remove the back cover, refer to the following figure and steps.

2

1. Unfold the bracket.

2. Open and remove the back cover.

To prevent injury, properly place the back cover after you r emove the back cover because it may have sharp edges and angles.

3.2

To install the SIM card

Before installing or removing the SIM card, power off the

Tablet.

Insert your SIM card into the SIM card slot as shown in the following figure until the SIM card is completely in position.

3.4

To install the back cover

To install the back cover, refer to the following figure and steps.

3.3

To install the battery

To install the battery, refer to the following figure.

3

1. Install the back cover.

2. Fold the bracket.

4

Turning the Tablet on or off

4.1

To turn the Tablet on

Before you turn the Tablet on, ensure that the SIM card has been correctly installed and that the battery is correctly installed or the

Tablet has been properly connected to the power supply.

To turn the Tablet on, press and hold the Power key for about two seconds.

4.2

PIN protection

If your SIM card is preset with a PIN, the Tablet prompts you to enter the PIN.

The PIN may have been provided by your service provider with your SIM card. If you lost it, consult your service provider.

4.3

To turn the Tablet off

1. Press and hold Power key to open the Tablet options menu.

2. Touch Power off .

3. Touch OK to assure you want to turn your Tablet off in the dialog that opens.

4

5

Charging the battery

Before charging the battery, ensure that the battery is properly installed on your Tablet.

To charge the battery, you can connect the Tablet to the power supply through the power adapter, as shown in the following figure.

5

6

Using the touchscreen

By using your finger, you can manipulate target items such as applications and controls, and enjoy the touchscreen at your fingertips. The Tablet supports the following actions.

Action Description

Touch

Touch and hold

Drag

Flick

Simply touch items on the screen, such as applications and controls. For example, you can type letters and symbols using the onscreen keyboard.

Touch and hold an item on the screen until an action occurs. For example, you can usually touch and hold the screen to open the context menu of the active item.

Touch and hold an item, and then move your finger on the screen until you reach the target position.

For example, you can drag a shortcut to the trash to delete it.

Flick your finger vertically or horizontally across the screen. For example, you can flick up and down to manipulate a scroll bar and flick left and right to switch between pictures.

7

Locking and unlocking the screen

7.1

To lock the screen

When the Tablet is on, press the Power key to turn off and lock the screen.

When the Tablet remains idle for a time period that you have set, the screen will automatically lock.

To save your battery or prevent accidental taps when not in use, or when you want to wipe smudges off your touchscreen, turn off and lock the screen.

7.2

To unlock the screen

When the screen is off, you can press the Power key to turn on it, and then unlock the screen through the following steps.

1. If you have not set up a screen unlock pattern, press the Menu key to unlock the screen, or follow the instructions displayed on the screen and flick upwards to unlock the screen.

2. If you have set up a screen unlock pattern, the Tablet prompts you to draw the pattern on the screen to unlock it.

8

Setting date and time

By default, the Tablet automatically uses the network provided date, time zone, and time.

When the time provided by the network is automatically used, you cannot set the date, time, and time zone by yourself.

To manually set date and time, do as the following steps.

1. Open the Settings list.

2. Touch Date & time .

3. Touch Automatic to make it unchecked.

4. Touch Set date . Then touch the plus button or the minus button to adjust the date, month, and year, or touch the text field of date, month, and year to enter them. Touch Set when finished.

5. Touch Select time zone , then select the time zone in the list.

Scroll down the list to view more time zones.

6. Touch Set time . Then touch the plus button or minus button to adjust the hour and minute, or touch the text field of hour and minute to enter them. Touch Set when finished.

6

9

Installing or removing the microSD card

Insert your microSD card into the microSD card slot as shown in the following figure until the microSD card clicks into position.

10

For more help

For more help, you can open the user guide on the device on the

Applications screen. You can also press the Menu key when you are on the Home screen, and touch Settings > About tablet > User

Guide .

To remove the microSD card, slightly push the card further into t he slot, and wait for it to ejects out for about 2 mm, and then remove it.

7

11

Warnings and Precautions

To use the device properly and safely, read these warnings and precautions carefully and strictly observe them during operation.

Unless otherwise specified, the term "device" refers to the device and its accessories.

Basic Requirements z

During storage, transportation, and operation of the device, keep it dry and prevent it from colliding with other objects. z

Do not dismantle the device. In case of any fault, contact an authorized service center for assistance or repair. z

Without authorization, no organization or individual can change the mechanical, safety, or performance design of the device. z

When using the device, observe all applicable laws and regulations and respect the legal rights of other people.

Environmental Requirements for Using the Device z

Before connecting and disconnecting cables, stop using the device, and then disconnect it from the power supply. Ensure that your hands are dry during operation. z

Keep the device far from sources of heat and fire, such as a heater or a candle.

8 z Keep the device far from electronic appliances that generate strong magnetic or electric fields, such as a microwave oven or a refrigerator. z Place the device on a stable surface. z Place the device in a cool and well-ventilated indoor area. Do not expose the device to direct sunlight. z Keep the ambient temperature between 0°C and 35°C while the device is being charged. Keep the ambient temperature between

0°C to 40°C for using the device powered by a battery. z Do not block the openings on the device with any object. Reserve a minimum space of 10 cm around the device for heat dissipation. z Do not place any object (such as a candle or a water container) on the device. If any foreign object or liquid enters the device, stop using the device immediately, power it off, remove all the cables connected to it, and then contact an authorized service center. z During thunderstorms, power off the device, and then remove all the cables connected to it to prevent it from getting damaged due to lightning strikes.

Precautions for Using Wireless Devices z The device complies with the RF specifications when the device is used in portable exposure conditions or at a distance of 0 cm from your body.

z Do not use the device where using wireless devices is prohibited or may cause interference or danger. z The radio waves generated by the device may interfere with the operation of electronic medical devices. If you are using any electrical medical device, contact its manufacturer for the restrictions on the use of the device. z Do not take the device into operating rooms, intensive care units

(ICUs), or coronary care units (CCUs).

Areas with Inflammables and Explosives z Do not use the device where inflammables or explosives are stored, for example, in a gas station, oil depot, or chemical plant.

Otherwise, explosions or fires may occur. In addition, follow the instructions indicated in text or symbols. z Do not store or transport the device in the same box as inflammable liquids, gases, or explosives.

Accessory Requirements z Use only the accessories supplied or authorized by the device manufacturer. Otherwise, the performance of the device may get affected, the warranty for the device or the laws and regulations related to telecommunications terminals may become null and void, or an injury may occur. z Do not use the power adapter if its cable is damaged. Otherwise, electric shocks or fires may occur.

9 z Ensure that the power adapter meets the specifications indicated on the device nameplate. z Ensure that the power adapter meets the requirements of Clause

2.5 in IEC60950-1/EN60950-1 and it is tested and approved according to national or local standards. z For pluggable device, the socket-outlet shall be installed near the device and shall be easily accessible.

Battery and Charger z Unplug the charger from the electrical plug and the device when not in use. z The battery can be charged and discharged hundreds of times before it eventually wears out. When the standby time and the talk time are shorter than the normal time, replace the battery. z Use the AC power supply defined in the specifications of the charger. An improper power voltage may cause a fire or a malfunction of the charger. z Do not connect two poles of the battery with conductors, such as metal materials, keys, or jewelries. Otherwise, the battery may be short-circuited and may cause injuries and burns on your body. z Do not disassemble the battery or solder the battery poles.

Otherwise, it may lead to electrolyte leakage, overheating, fire, or explosion.

z If battery electrolyte leaks out, ensure that the electrolyte does not touch your skin and eyes. When the electrolyte touches your skin or splashes into your eyes, wash your eyes with clean water immediately and consult a doctor. z If there is a case of battery deformation, color change, or abnormal heating while you charge or store the battery, remove the battery immediately and stop using it. Otherwise, it may lead to battery leakage, overheating, explosion, or fire. z If the power cable is damaged (for example, the cord is exposed or broken), or the plug loosens, stop using the cable at once.

Otherwise, it may lead to an electric shock, a short circuit of the charger, or a fire. z Do not dispose of batteries in fire as they may explode. Batteries may also explode if damaged. z Danger of explosion if battery is incorrectly replaced. Recycle or dispose of used batteries according to the local regulations or reference instruction supplied with your device.

Prevention of Hearing Damage

Using a headset at high volume can damage your hearing. To reduce the risk of damage to hearing, lower the headset volume to a safe and comfortable level.

Safety of Children

Keep the device and its accessories out of the reach of children.

Otherwise, they may damage the device and its accessories by mistake, or they may swallow the small components of the device, causing suffocation or other dangerous situations.

Maintenance z

If the device is not used for a long time, power it off, and then remove all the cables connected to it. z

If any exception occurs, for example, if the device emits any smoke or unusual sound or smell, stop using the device immediately, power it off, remove all the cables connected to it, and then contact an authorized service center. z

If the device screen is broken by colliding with hard objects, do not touch or try to remove the broken part. In this case, stop using the device immediately, and then contact an authorized service center in time. z

Do not trample, pull, or overbend any cable. Otherwise, the cable may get damaged, causing malfunction of the device. z

Before cleaning the device, stop using it, power it off, and then remove all the cables connected to it. z

Use a clean, soft, and dry cloth to clean the device shell. Do not use any cleaning agent or spray to clean the device shell.

10

Emergency Call

You can use your device for emergency calls in the service area. The connection, however, cannot be guaranteed in all conditions. You should not rely solely on the device for essential communications.

Certification Information (SAR)

This device meets guidelines for exposure to radio waves.

Your device is a low-power radio transmitter and receiver. As recommended by international guidelines, the device is designed not to exceed the limits for exposure to radio waves. These guidelines were developed by the independent scientific organization

International Commission on Non-Ionizing Radiation Protection

(ICNIRP) and include safety measures designed to ensure safety for all users, regardless of age and health.

The Specific Absorption Rate (SAR) is the unit of measurement for the amount of radio frequency energy absorbed by the body when using a device. The SAR value is determined at the highest certified power level in laboratory conditions, but the actual SAR level of the device when being operated can be well below the value. This is because the device is designed to use the minimum power required to reach the network.

The SAR limit adopted by USA is 1.6 watts/kilogram (W/kg) averaged over one gram of tissue. The highest SAR value reported to the FCC for this device type when tested for use in portable exposure conditions is 1.1 W/kg.

Disposal and Recycling Information

11

This symbol on the device (and any included batteries) indicates that the device (and any included batteries) should not be disposed of as normal household garbage. Do not dispose of your device or batteries as unsorted municipal waste. The device (and any batteries) should be handed over to a certified collection point for recycling or proper disposal at the end of its life.

For more detailed information about the recycling of the device or batteries, contact your local city office, the household waste disposal service, or the retail store where you purchased this device.

The disposal of this device is subject to the Waste from Electrical and

Electronic Equipment (WEEE) Directive of the European Union. The purpose for separating WEEE and batteries from other waste is to minimize any environmental impact and health hazard due to the presence of hazardous substances.

Reduction of Hazardous Substances

This device is compliant with the EU Registration, Evaluation,

Authorisation and Restriction of Chemicals (REACH) Regulation

(Regulation No 1907/2006/EC of the European Parliament and of the

Council) and the EU Restriction of Hazardous Substances (RoHS)

Directive (Directive 2002/95/EC of the European Parliament and of the Council). For more information about the REACH compliance of the device, visit the Web site www.huaweidevice.com/certification.

You are recommended to visit the Web site regularly for up-to-date information.

EU Regulatory Conformance

This device should be installed and operated with a minimum distance of 20 cm between the antenna and all persons.

Български : С настоящето Huawei Technologies Co., Ltd. декларира , че този уред съответства на основните изисквания и другите разпоредби на Директива 1999/5/EC.

Č esky : Huawei Technologies Co., Ltd., tímto prohlašuje, že toto za ř ízení je ve shod ě se základními požadavky a dalšími souvisejícími opat ř eními sm ě rnice 1999/5/EC.

Dansk : Huawei Technologies Co., Ltd. erklærer hermed at denne enhed er i overensstemmelse med de obligatoriske krav og andre relevante bestemmelser i direktiv 1999/5/EF.

Nederlands : Hierbij verklaart Huawei Technologies Co., Ltd. dat dit apparaat in overeenstemming is met de essentiële eisen en de andere relevante bepalingen van richtlijn 1999/5/EC.

English : Hereby, Huawei Technologies Co., Ltd. declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.

Eesti : Käesolevaga kinnitab Huawei Technologies Co., Ltd., et see seade vastab Direktiivi 1999/5/EÜ põhinõudmistele ja teistele asjakohastele määrustele.

Suomi : Huawei Technologies Co., Ltd. vakuuttaa täten, että tämä laite on yhdenmukainen direktiivin 1999/5/EY olennaisten vaatimusten ja direktiivin muiden asiaankuuluvien lausumien kanssa.

Français (Européen) : Le fabricant déclare que ce produit est conforme aux exigences essentielles et aux autres dispositions pertinentes de la directive 1999/5/CE.

Deutsch : Huawei Technologies Co., Ltd. erklärt hiermit, dass dieses

Produkt die erforderlichen Bestimmungen und andere relevante

Verordnungen der Richtlinie 1999/5/EG einhält.

Ελληνικά : Δια της παρούσης η Huawei Technologies Co., Ltd.

δηλώνει ότι αυτή η συσκευή συμμορφώνεται με τις βασικές

απαιτήσεις και άλλες σχετικές διατάξεις της οδηγίας 1999/5/ Ε .

Κ .

Magyar : Jelen nyilatkozaton keresztül a Huawei Technologies Co.,

Ltd. kijelenti, hogy a készülék megfelel az EC/5/1999 Irányelv összes lényeges követelményének és vonatkozó el ő írásának.

12

Gaeilge : Fograíonn Huawei Technologies Co., Ltd leis seo go bhfuil an fheiste seo i gcomhlíonadh leis na fíor-riachtanais agus na forálacha eile maidir le Treoir 1999/5/AE.

Italiano : Col presente documento, Huawei Technologies Co., Ltd. dichiara che questo dispositivo è conforme ai requisiti essenziali e alle altre disposizioni applicabili della Direttiva 1999/5/CE.

Latviski : Ar šo Huawei Technologies Co., Ltd. pazi ņ o, ka š ī ier ī ce atbilst Direkt ī vas 1999/5/EC pamatpras ī b ā m un piem ē rojamajiem nosac ī jumiem.

Lietuviškai : Šiuo Huawei Technologies Co., Ltd. praneša, kad šis į taisas atitinka Direktyvos 1999/5/EC pagrindinius reikalavimus ir taikomas s ą lygas.

Malti : Hawnhekk, Huawei Technologies Co., Ltd. tiddikjara li dan it-tag ħ mir hu konformi malħ ti ġ ijiet essenzjali u provvedimenti rilevanti o ħ rajn ta’ Direttiva 1999/5/KE.

Polski : Wymieniona w tym dokumencie firma Huawei Technologies

Co., Ltd. deklaruje, ż e niniejsze urz ą dzenie spe ł nia zasadnicze wymagania w zakresie zgodno ś ci oraz inne odno ś ne postanowienia

Dyrektywy 1999/5/EC.

Português (Europeu) : Deste modo, a Huawei Technologies Co.,

Ltd. declara que este dispositivo está em conformidade com os requisitos essenciais e outras provisões relevantes da Directiva

1999/5/CE.

13

Român ă : Prin prezenta Huawei Technologies Co., Ltd. declar ă c ă acest dispozitiv este conform cu cerin ţ ele esen ţ iale ş i alte prevederi relevante ale directivei 1999/5/CE.

Sloven č ina : Huawei Technologies Co., Ltd. týmto vyhlasuje, že zariadenie je v súlade so základnými požiadavkami a inými relevantnými predpismi Smernice 1999/5/ES.

Slovenš č ina : Huawei Technologies Co., Ltd. izjavlja, da je ta naprava v skladu z bistvenimi zahtevami in drugimi ustreznimi dolo č bami Direktive 1999/5/ES.

Español (Europeo) : Con el presente documento, Huawei

Technologies Co., Ltd. declara que este dispositivo cumple con los requisitos esenciales y con las demás disposiciones correspondientes de la Directiva 1999/5/CE.

Svenska : Huawei Technologies Co., Ltd. förklarar härmed att denna produkt överensstämmer med de grundläggande kraven och andra relevanta föreskrifter i direktiv 1999/5/EG.

For the declaration of conformity, visit the Web site www.huaweidevice.com/certification.

0168

Notice: Observe the national local regulations in the location where the device is to be used. This device may be restricted for use in some or all member states of the European Union (EU).

Notice: This device may be operated in all member states of the EU.

France : Outdoor use limited to 10 mW e.i.r.p. within the band

2454-2483.5 MHz.

Italy : For private use, a general authorisation is required if

WAS/RLAN's are used outside own premises. For public use, a general authorisation is required.

Luxembourg : General authorisation required for network and service supply.

Norway : This subsection does not apply for the geographical area within a radius of 20 km from the centre of Ny-Ålesund.

Federal Communications Commission (FCC) Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC

Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy

14 and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: z Reorient or relocate the receiving antenna. z Increase the separation between the equipment and receiver. z Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. z Consult the dealer or an experienced radio/TV technician for help.

Warning: Changes or modifications made to this device not expressly approved by Huawei Technologies Co., Ltd. may void the FCC authorization to operate this device.

Copyright © Huawei Technologies Co., Ltd. 2010. All rights reserved.

No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei

Technologies Co., Ltd.

The product described in this manual may include copyrighted software of Huawei Technologies Co., Ltd and possible licensors.

Customers shall not in any manner reproduce, distribute, modify, decompile, disassemble, decrypt, extract, reverse engineer, lease, assign, or sublicense the said software, unless such restrictions are prohibited by applicable laws or such actions are approved by respective copyright holders under licenses.

Trademarks and Permissions

, , and are trademarks or registered trademarks of Huawei Technologies Co., Ltd.

Other trademarks, product, service and company names mentioned are the property of their respective owners.

Notice

Some features of the product and its accessories described herein rely on the software installed, capacities and settings of local network, and may not be activated or may be limited by local network

15 operators or network service providers. Thus the descriptions herein may not exactly match the product or its accessories you purchase.

Huawei Technologies Co., Ltd reserves the right to change or modify any information or specifications contained in this manual without prior notice or obligation.

NO WARRANTY

THE CONTENTS OF THIS MANUAL ARE PROVIDED “AS IS”.

EXCEPT AS REQUIRED BY APPLICABLE LAWS, NO

WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED,

INCLUDING BUT NOT LIMITED TO, THE IMPLIED WARRANTIES

OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE, ARE MADE IN RELATION TO THE ACCURACY,

RELIABILITY OR CONTENTS OF THIS MANUAL.

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW,

IN NO CASE SHALL HUAWEI TECHNOLOGIES CO., LTD BE

LIABLE FOR ANY SPECIAL, INCIDENTAL, INDIRECT, OR

CONSEQUENTIAL DAMAGES, OR LOST PROFITS, BUSINESS,

REVENUE, DATA, GOODWILL OR ANTICIPATED SAVINGS.

Import and Export Regulations

Customers shall comply with all applicable export or import laws and regulations and will obtain all necessary governmental permits and licenses in order to export, re-export or import the product mentioned in this manual including the software and technical data therein.

for Android™ Android is a trademark of Google Inc. Use of this trademark is subject to Google Permissions.