USER MANUAL
BTPay 200
Bluetooth Reader
Revision History
Rev Date
A 8/20/2012
Description of Changes
Initial release
04/10/2013
By
BTPay 200 User Manual
Table of Contents
Table of Contents ............................................................................................................
2
1 Introduction ...................................................................................................................
3
2 Applicable Documents ...............................................................................................
3
3 Features and Benefits ................................................................................................
3
4 Model Designations ....................................................................................................
3
5 Specifications ...............................................................................................................
4
6 Operation description ................................................................................................
5
7 Outline Drawing .........................................................................................................
12
Copyright © 2010-2013, International Technologies & Systems Corp. All rights reserved.
Page 2 of 13
BTPay 200 User Manual
1 Introduction
The BTPay 200 is a Payment Card Industry (PCI) certified Personal Identification
Number (PIN) Entry Device that encrypts a PIN for secure transmission that works with mobile devices or PCs with Bluetooth connectivity. It includes a PIN Pad, a secure
MagStripe reader and a Smart Card reader.
2 Applicable Documents
ISO 7810
ISO 7811 - 1 through 6
ISO 4909
ISO 7812
ISO 7813
AAMVA Specifications
Identification cards -- Physical characteristics
Identification Cards - Track 1 through 3
Magnetic stripe content for track 3
Identification Cards – Identification for issuers Part 1 & 2
Identification Cards – Financial Transaction Cards
Drivers License Standards - Most recent available
3 Features and Benefits
Bluetooth communication for all major Smart Phone platforms
Wireless range up to 30 feet
Battery life: 4 hours active, 8 hours standby
Integrated EMV Chip & PIN solution
Bi-Directional MSR that reads up to 3 tracks of information
Low power consumption when reader is in standby mode
Uses an external battery charger with Micro-B connectivity.
Compact and ergonomic design to fit comfortably in user’s hand
Encrypted MSR and encrypted keyed-in output.
1 year manufacturer warranty
4 Model Designations
BTPay 200 IDMR-PBT81133TEB
Copyright © 2010-2013, International Technologies & Systems Corp. All rights reserved.
Page 3 of 13
BTPay 200 User Manual
5 Specifications
•
Interface
Bluetooth v2.1 + EDR System
Can also be a standalone USB device for key injection when a Micro-B to
A USB cable is connected
Bluetooth is disabled during key injection or DFU communication
•
Batteries
Rechargeable battery
Battery life:
•
Up to 8 hours in standby mode
•
Up to 4 hours in active mode
•
Active mode is defined as 10+ swipes per hour
Charging through Micro-B interface external charger
•
The unit is functional if Bluetooth connection is on while charging
•
Magnetic stripe
Meets ISO 7811 specification
Supports AAMVA formats
Support single, dual or triple tracks.
Bi-directional
DES, 3DES, & AES Encryption
•
Smart Card reader
EMV level 1
Reads ISO 7816 microprocessor cards
Card seated switch
Sliding contact
•
PIN Pad
MK/SK, DUKPT Key Management
DES and 3DES Encryption
ANSI X9.8 recommended key layout (10 numerical keys, 3 function keys,
3 operation keys)
ADA compliance
Supports clear text entry
•
LCD
Graphics LCM unit consists of 128(segment) x 64(common) dots dotmatrix LCD panel. to meet minimum EMV Level 2 requirement
•
Reliability
Magnetic Head Life: 300,000 passes minimum
Rail and Cover Life: 100,000 passes minimum
MTBF: 300,000 POH
•
Electro-Static Discharges (ESD)
Copyright © 2010-2013, International Technologies & Systems Corp. All rights reserved.
Page 4 of 13
BTPay 200 User Manual
4 kV contact, and 8 kV air discharge
•
Environmental
Temperature range
Operating
Storage
0 to 55
°
C
-30 to 70
°
C
(32 to 131
°
F) [non-condensing]
(-22 to 158
Relative humidity: maximum 95% (non-condensing)
°
F) [non-condensing]
6 Operation
How to make Bluetooth link between the BTPay 200 and PC
please follow these steps:
1. Install the battery to power on the BTPay 200, please ensure that the battery is fully charged before installing. After the BTPay 200 starts working properly it will display the information.
Copyright © 2010-2013, International Technologies & Systems Corp. All rights reserved.
Page 5 of 13
BTPay 200 User Manual
2. Insert the Bluetooth adapter into the USB port on the PC. The Bluetooth adapter work properly the computer will display the Bluetooth icon
Copyright © 2010-2013, International Technologies & Systems Corp. All rights reserved.
Page 6 of 13
3. Add a Device
BTPay 200 User Manual
Copyright © 2010-2013, International Technologies & Systems Corp. All rights reserved.
Page 7 of 13
BTPay 200 User Manual
Copyright © 2010-2013, International Technologies & Systems Corp. All rights reserved.
Page 8 of 13
BTPay 200 User Manual
4.
After the device was successfully added to the computer, select “Show Bluetooth
Devices” and found the correct communication serial port.
Copyright © 2010-2013, International Technologies & Systems Corp. All rights reserved.
Page 9 of 13
BTPay 200 User Manual
Copyright © 2010-2013, International Technologies & Systems Corp. All rights reserved.
Page 10 of 13
BTPay 200 User Manual
Copyright © 2010-2013, International Technologies & Systems Corp. All rights reserved.
Page 11 of 13
BTPay 200 User Manual
7 Outline Drawing
Copyright © 2010-2013, International Technologies & Systems Corp. All rights reserved.
Page 12 of 13
BTPay 200 User Manual
FCC INFORMATION
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.
RF Exposure: A distance of 20 cm shall be maintained between the antenna and users, and the transmitter may not be co-located with any other transmitter or antenna.
Copyright © 2010-2013, International Technologies & Systems Corp. All rights reserved.
Page 13 of 13
