advertisement
PC-217237
Bluetooth stereo headset
User’s manual
Contents
Brief introduction………………………………….…………...…
1
1.
Bluetooth wireless communication technology…...………….….....1
2.
About PC-0217237………………………………..…….…….…....1
Before use…………………………………………………...……..2
1.
Overview……………………………..………………..…………...2
2.
Charging the headset………………………….………………....…3
Getting started.……………………………….………….………..3
1.
Turning on/off the headset……………….……….……………...…3
2.
Pairing the headset with Bluetooth devices…………………..….....4
How to enter pairing mode……………………..……………….....4
Pairing the headset with a Bluetooth cell phone…...............…........4
Pairing the headset with a Bluetooth transmitter..………………....5
Multi-pairing………………………………………………….…....6
3.
Re-connecting with a Bluetooth device………………………...…..6
4.
Wearing the headset…………………………………………….…..7
5.
Making a call with the headset…………………………..………....7
6.
Music playback………………………………………..……….…...9
7.
LED indicator…………………………………………….………..10
8.
Indication tone………………………...………………..…...…..…11
Care and maintenance……………………..……………….….…11
FAQs…………………………………………………..……..….…11
Specifications……………………………………..…….....……....13
user’s manual carefully before use.
Brief introduction
1.
Bluetooth wireless communication technology
Bluetooth is a standard of close range wireless communication technology that was drawn up by Ericsson, IBM, Intel, Nokia and Toshiba. With
Bluetooth technology, we can achieve the highest transmission rate among cell phones, computers, printers, PDAs and other devices. The max transmission range of class II is 10 meters while the max transmission range of class I can reach up to 100 meters.
2.
About PC-217237 very easy to take with you. It supports the following Bluetooth profiles:
HSP —— Headset Profile
HFP —— Hands-free Profile
A2DP—— Advanced Audio Distribution Profile
AVRCP——Audio/Video Remote Control Profile features:
1) Pairing with a Bluetooth cell phone or PDA supporting HFP profile.
Answer a call, end a call and reject a call
Redial last number
Voice dial
Adjust the volume
Call transfer between the headset and your Bluetooth cell phone
Microphone mute
2) Pairing with a Bluetooth music device or Bluetooth transmitter supporting A2DP profile.
Enjoy music wirelessly
Adjust the volume
Remote control pause/play
Remote control previous/next track
1
3) Easy to switch between the call and music, you will not miss the incoming call during listening to music.
4) Every time the headset is turned on, it will connect to last connected device automatically.
Note: Even though the paired device and the headset support the same
Bluetooth profiles, functions may vary due to specification differences of the paired devices.
Before use
1.
Overview
1 Foldable and retractable headhand
2 + button: Volume up
3 ﹤ button: Previous track
4 ﹥ button: Next track
5 Built-in microphone
6 LED indicator
7
Multi-function button ( MFB ): Power on/power off/answer a call/end a call/reject a call/microphone mute/call transfer/redial last number/voice dial/pause/play
8 Charging jack
2
2.
Charging the headset
The headset comes with a built-in rechargeable battery, prior to using it, it is recommended to charge the battery fully for the first time.
When the headset is low power, red LED flashes twice and the headset emits three “Dong” tones every 20 seconds. Please recharge the battery of the headset.
Connect the USB cable to a computer USB port and the USB cable plug to the charging jack of the headset. Red LED is on while charging. It takes about 3 hours to charge the battery fully. When charging has completed, red
LED will be off.
Remarks:
1) The battery is recyclable.
2) Batteries (battery pack or batteries installed) shall not be exposed to excessive heat place, such as sunshine, fire or the like.
Getting started
1.
Turning on/off the headset
Function Operation LED indicator
Power on
Power off
Press and hold MFB button for
3 ～ 5 seconds until blue LED flashes
Press and hold MFB button for
3 ～ 5 seconds until red LED flashes
Blue LED is on for 1 second
Red LED is on for
1 second
3
Remark: In order to save power, the headset will turn off automatically if no devices can be connected after 5 minutes.
2.
Pairing the headset with Bluetooth devices
How to enter pairing mode
Function Operation LED indicator
Entering pairing mode
Ensure the headset is turned off, otherwise turn it off first and then press and hold MFB button for
6 ～ 7 seconds until LED flashes red and blue alternately
LED flashes red and blue alternately
Remark: Pairing mode will last 2 minutes. If no devices can be connected after 2 minutes, it will return to standby mode automatically .
Pairing the headset with a Bluetooth cell phone
Prior to using the headset for the first time, you have to pair it with a
Bluetooth-enabled cell phone. The pairing procedures are subject to different models of cell phones. Please refer to your cell phone user’s manual for further information. The general pairing procedures are as follows:
1) Place the headset and Bluetooth cell phone where they are easily viewable by no more than 1 meter apart;
2) Enter the headset’s pairing mode (please refer to “How to enter pairing mode);
3) Activate your cell phone’s Bluetooth function and set your cell phone to list of devices shown;
4) According to the indication, enter password or PIN No: “0000”;
5) If prompted by your cell phone to connect, select “Yes” (this will vary among cell phone models);
6) After successful connecting, blue LED flashes twice or three time every
4 seconds.
You should now be able to make and receive a call using the headset.
Remarks:
If pairing is failed, please turn off the headset first and then re-pair according to steps 1 ～ 6 mentioned above.
4
After pairing is successful, the headset and the cell phone will remember each other, they will no need to re-pair next time. The headset can
remember 8 paired devices, When the number of paired devices exceeds
8, the first one will be replaced.
Every time the headset is turned on, it will connect to last connected device automatically. If you want to pair it with other devices, please turn off the Bluetooth function of last connected devices first and pair the
headset with the new device according to steps 1 ～ 6 mentioned above.
Pairing the headset with a Bluetooth transmitter
You can connect the headset to a Bluetooth transmitter to enjoy music wirelessly. Hereby take BTT010 (Bluetooth transmitter for iPod, not included) for example. The pairing steps are as follows:
1) Place the headset and the Bluetooth transmitter where they are easily viewable by no more than 1 meter apart;
2) Enter the headset’s pairing mode (Please refer to “How to enter pairing mode);
3) Turn on the Bluetooth transmitter. It will search for Bluetooth devices automatically and send a pairing request;
4) When the headset requests to enter a PIN No., the transmitter will response “0000” automatically;
5) After successful pairing and connecting, blue LED of the headset will flash twice every 4 seconds.
Remarks:
The pairing password of the headset is “0000”. So, the headset can only pair with a Bluetooth transmitter whose pairing password is “0000”.
If pairing still fails after several tries, please refer to the Bluetooth transmitter’s user’s manual for further information.
5
Multi-pairing
The headset can connect with two devices at most. One is a Bluetooth cell phone supporting HFP profile, the other one is a Bluetooth music device supporting A2DP profile. If you want to finish the multi-pairing, please refer to the following steps:
1) Firstly, pair the headset with a Bluetooth transmitter (refer to “pairing the headset with a Bluetooth transmitter);
2) Turn off the Bluetooth transmitter;
3) Pair and connect the headset with a Bluetooth cell phone (refer to
“pairing the headset with a Bluetooth cell phone”).
4) Turn on the Bluetooth transmitter, it will connect to the headset automatically.
Remarks:
After successful multi-pairing, the paired devices will remember each other. Unless pairing information is deleted because of new pairing, they will no need to pair next time. If the pairing information is deleted, please connect the mobile phone with the headset first and then turn on the Bluetooth transmitter, multi-connecting can be performed.
For the cell phone supporting the HSP and A2DP at the same time. It may set up HSP and A2DP connection with the headset simultaneously.
At this time, the Bluetooth transmitter may not connect to the headset.
3.
Re-connecting with a Bluetooth device
1) Automatic connecting
Every time the headset is turned on, it will connect to last connected device automatically.
2) Manual connecting
When the headset doesn’t connect to a device supporting HFP, double click
MFB button, it will connect to last connected HFP device.
When the headset doesn’t connect to a device supporting A2DP, short press
MFB button, it will connect to last connected A2DP device.
Remarks:
Before connecting to a Bluetooth device, please turn on the Bluetoth device’s Bluetooth function.
On some Bluetooth devices, take some Nokia cell phones for example, you have to allow automatic connecting in the cell phone’s settings.
Please refer to your cell phone’s manual for further information.
6
4.
Wearing the headset
The headhand of the headset is foldable and retractable, please adjust according to the actual use. Logo “L” of the headset represents left ear, Logo
“R” of the headset represents right ear. Please wear the headset according to the indication of the Logo.
5.
Making a call with the headset
1) Basic operation
Function
Cancel calling
Answer a call
Reject a call
End a call
Volume up
Volume down
Status of
PC-217237
Calling
Incoming ring
Incoming ring
During a call
During a call
During a call
Call transfer
(headset to mobile phone)
Call transfer
(mobile phone to headset)
Microphone mute
Cancel mute
During a call
During a call
During a call
During a call
(microphone mute)
Function
Voice dial
Status of
237
Standby mode and connected to a device
Operation
Short press MFB button
Short press MFB button
Press and hold MFB button for
2 seconds and release it until hearing indication tone
Short press MFB button
Touch ＋ button, when touch
＋ button all the time, the volume will increase continuously
Touch － button, when touch
－ button all the time, the volume will reduce continuously
Press and hold MFB button for
2 seconds and release it until hearing indication tone
Press and hold MFB button for
2 seconds and release it until hearing indication tone
Short press
Short press
MFB
MFB
button twice
button twice
7
Operation
Simultaneously press and hold
MFB buttons for 2 seconds and release them until hearing indication tone
Redial last number
Standby mode and connected to a device
Short press MFB button twice
Lock/unloc k the buttons
Clear pairing list
Standby mode
Charging
Simultaneously press and hold
MFB and ＋ buttons for 2 seconds and release them until hearing indication tone
Firstly press and hold MFB button and then press and hold － button for 5 seconds, and release them until red LED flashes once
2) Three-way call
Function
Status of
PC-217237
Operation
End current call and answer a new incoming call
Keep current call and answer a new incoming call
Call transfer
End current call and switch to reserved call
There is a new incoming call
There is a new incoming call
During a call （ keep another call ）
During a call another call
（
） keep
Short press button once
Short press
MFB button twice
Short press
MFB
MFB button twice
Short press button once
MFB
Warning: Excessive pressure from earphones and headphones can cause hearing loss.
8
Remarks:
Not all cell phones support all functions listed above. Please refer to your cell phone’s user’s manual for further information.
Certain functions and indication tones maybe vary with different models
of cell phones.
When the volume is adjusted to max. or min., you will hear a indication
tone.
When pressing the answer button on some cell phones, the call will be transferred to the cell phone. You have to switch the call to the headset manually then. Please refer to your cell phone’s user’s manual for further information.
6.
Music playback
After connecting the headset to a Bluetooth cell phone or Bluetooth transmitter supporting A2DP, you can enjoy music with the headset.
Function
Status of
PC-217237
Operation
Volume up
Volume down
Playing music
Playing music
Pause
Playing music
Short press MFB button
Play Pausing MFB button
Previous track
Playing music
Touch ＋ button, when touch ＋ button all the time, the volume will increase continuously
Touch － button, when touch － button all the time, the volume will reduce continuously
Touch ﹤ button
Next track
Playing music
Touch ﹥ button
Remarks:
When playing music on some cell phones, the music will be transmitted to the cell phone’s speaker instead of the headset. You have to select
“transmit the sound via Bluetooth” in the settings menu and then choose headset. Please refer to your cell phone’s user’s manual for further information.
9
When the volume is adjusted to max. or min., you will hear a indication tone.
If you want to remote control previous/next track, pause/play, it needs your Bluetooth cell phone or Bluetooth transmitter paird with the headset to support AVRCP profile, please refer to the user’s manual of your cell phone or Bluetooth transmitter for further information.
7.
LED indicator
1) When the headset is charging
LED indicator
Red LED is on
Red LED is off
Status of the headset
Charging in progress
Finish charging
2) When the headset connected to a Bluetooth device
LED indicator Status of the headset
LED flashes red and blue alternately
Blue LED flashes once every 3 seconds
Blue LED flashes twice every 5 seconds
Blue LED flashes 3 times every 5 seconds
Pairing mode
Not connected to a
Bluetooth device
Connected to a HFP device or A2DP device)
Simultaneously connected to a HFP device and A2DP device
Calling Blue LED flashes twice or 3 times every 5 seconds
Blue LED flashes twice every 4 seconds
Blue LED flashes once every 5 seconds
Red LED flashes twice every 20 seconds
Incoming ring
During a call
Low power
10
8.
Indication tone
Indication tone
Two short “DU” tones
Emits 2 tones every 5 seconds
Status of PC-2175237
Enter pairing mode
During a call (Microphone mute)
Emits 3 “Dong” tones every 20 seconds
Low power
Care and maintenance
Read the following recommendations before using the headset. Following these you will be able to enjoy the product for many years.
Do not expose the headset to liquid, moisture or humidity to avoid the product’s internal circuit being affected.
Don’t use abrasive cleaning solvents to clean the headset.
Do not expose the headset to extremely high or low temperature as this will shorten the life of electronic devices, destroy the battery or distort certain plastic parts.
Don’t dispose of the headset in a fire as it will result in an explosion.
Don’t expose the headset to contact with sharp objects as this will cause scratches and damage.
Don’t let the headset fall down onto the floor. The internal circuit might get damaged.
Don’t attempt to disassemble the headset as it may get damaged if you are not professional.
In case the headset doesn’t function properly, send it to the store you bought it. The staff will help you to solve the problem.
FAQs
1 Why does red LED flash twice every 20 seconds?
The headset is low power, it needs to be recharged.
2 Why isn’t red LED on when charging? a) Please make sure the USB charger connects well with the headset; b) When you didn’t use the headset for a long time, the battery may dry up.
At this time, you have to charge the battery for 30 minutes, and then the red LED will be on.
11
3 How far is the effective range between the headset and Bluetooth cell phone?
According to the Bluetooth standard, the max. controllable range of
Class II headset is 10 meters. It varies under different environment.
4 What to do when my cell phone can not search and find the headset?
The cell phone will not find the headset if the headset and cell phone are not under the pairing mode. Make sure the headset is under the pairing mode and in the effective working range, and then the headset can be paired and connected.
5 Why can’t hear the voice from the headset? a) Make sure the headset is turned on; b) Ensure the volume of the headset is not too low or mute; c) Make sure the headset connects well with your cell phone; d) Ensure the distance between the headset and your cell phone is in the normal working scope.
6 Why is there no voice when making a call with the headset? a) Make sure your cell phone is in the strong signal area; b) Ensure the headset is in the function range.
7 Why can’t I remotely control the pause, play, previous track and next track functions with the headset when playing music?
The function needs the Bluetooth device paired with the headset to support AVRCP (Audio/Video Remote Control Profile). Please make sure your cell phone or Bluetooth transmitter supports AVRCP profile.
12
Specifications
Bluetooth specification
Bluetooth profiles
Operating distance
Working time
Bluetooth V2.1+EDR
HSP, HFP, A2DP and AVRCP
10 meters, Class II
Music: Up to 10 hours
Standby time
Charing input
Charging time
Dimensions
Weight
Talk: Up to 11 hours
200 hours
DC 5V 130mA
About 3 hours
158×156×55mm
103 g
Notes:
1.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
2.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
13
advertisement
Related manuals
advertisement