Mitsumi Electric POO-R237999 RemoteController User Manual

Operations Manual
Français p. XXX
Español p. XXX
System Components
14
Back View
Front View
Ř The Wii U Pro Controller is sold separately. This controller only works with Wii U software
that supports Wii U Pro Controller gameplay (see game packaging for compatibility information). This controller can be used with the Wii U Menu and for Wii U system operations.
Wii U Pro Controller (optional accessory)
See the Wii U Electronic Manual (
respond,” for more information.
RESET Button
), Troubleshooting, “The Wii U Pro Controller does not
Press this to pair the Wii U Pro Controller with the console (p. 22).
SYNC Button
You can remove the cover if you need to replace the rechargeable battery (p. 40).
Ř Do not remove the cover unless you need to replace the battery or check battery
installation.
Battery Cover
+Control Pad
Press to turn the Wii U console and Wii U GamePad on or off (p. 20).
POWER Button
Indicates the player number assigned to the controller currently in use.
Player LED
A/B/X/Y Buttons
+ Button/START
Displays the HOME Menu, where you can configure or check the battery life of the Wii U
Pro Controller or view pre-installed electronic manuals (see the Wii U Electronic Manual
( ), on the HOME Menu.
HOME Button
– Button/SELECT
Ř Can also function as a button when pressed.
R Stick
R & ZR Buttons
Indicates charging status and remaining battery life (p. 19).
Battery LED
Connects to the USB cable for charging the controller (p. 18).
USB Port
L & ZL Buttons
Ř Can also function as a button when pressed.
L Stick
15
System Components
18
Charging the Wii U Pro Controller
Actual battery life depends on the features used, such as the rumble feature or wireless
communication use, ambient temperature, and other factors.
ŘBattery Life: approx. 80 hours
Charging time will vary depending on how the system is being used and how much
charge is left in the battery.
ŘCharging Time: approx. 4.5 hours
Estimated Charging Time and Battery Life
Connect the USB cable, Model No. WUP-018, included with the Wii U Pro Controller as shown
below. Make sure all plugs are inserted straight all the way into the connectors.
Charging Procedure
NOTE: The Wii U console must be turned on to charge the controller.
Ř Before use with the Wii U system, wireless controllers must be paired with the console (p. 22).
Ř Optimal charging temperature is between 50°F-95°F
(10°C-35°C).
Ř Be sure to fully charge the battery before use for the
first time, or if the system has not been used for a
long time.
The battery LED will light orange when the battery is
charging and turn off when charging is complete.
The Wii U Pro Controller is a dedicated wireless
controller for the Wii U system. This accessory is sold
separately.
Charging the Wii U Pro Controller
Battery LED status
Remaining battery life
Full charge
(Off)
(Steady red)
Low
If the battery LED turns red, charge the Wii U Pro Controller.
(Blinking red)
Very low
Ř If you run out of battery life while playing a game, you will not be able to use the controller.
The color and status of the LED changes depending on the remaining battery charge.
Battery LED Status
19
Charging the Wii U Pro Controller
42
Battery Replacement
Ř Waiting 10 seconds will allow the power LED
to reset correctly.
Make sure the battery is oriented correctly, as
show in the illustration.
Wait at least 10 seconds before inserting the new battery.
Ř Please recycle the used battery (p. 43).
Insert the stylus from the Wii U GamePad under the battery, as shown below, and gently
lift the edge, allowing you to remove the battery.
Remove the battery.
The battery cover is designed so the screw can be loosened, but not fully removed.
Loosen the screw and remove the battery cover.
Ř To avoid damage to the screw or threads, use a screwdriver that is appropriate for the screw
(crosshead style, size 0).
Ř Before replacing the battery, turn the Wii U console power off and disconnect the USB cable if
it is connected to the controller.
Do not use any battery other than the Wii U Pro Controller rechargeable battery,
Model No. CTR-003.
A replacement battery can be ordered from the Nintendo website at store.nintendo.com (USA/
Canada only) or by calling Customer Service at 1-800-255-3700.
Wii U Pro Controller
Replace the battery cover.
For more information or for assistance from Nintendo, visit:
recycle.nintendo.com
To find a collection site near you, contact your local solid
waste authority or, in the United States, visit:
http://www.epa.gov/osw/conserve/materials/battery.htm
Ř Do not dispose of rechargeable batteries in a fire.
Ř Do not disassemble, attempt to repair, or deform the
battery pack.
Cover the terminals with tape before recycling.
When disposing of a rechargeable battery, take care to
follow appropriate local guidelines and regulations.
PLEASE RECYCLE YOUR USED BATTERIES
Battery for the
Wii U Pro Controller
Battery for the
Wii U GamePad
IMPORTANT: Always be sure to replace the battery cover and tighten the screws
before resuming use.
After replacing the battery cover, tighten the two screws, being careful not to
overtighten them.
43
Battery Replacement
Warranty and Service Information
52
This warranty is only valid in the United States and Canada.
Nintendo’s address is: Nintendo of America Inc., P.O. Box 957, Redmond, WA 98073-0957 U.S.A.
Revision R1
This warranty gives you specific legal rights. You may also have other rights which vary from state to state or province to
province.
ANY APPLICABLE IMPLIED WARRANTIES, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, ARE HEREBY LIMITED IN DURATION TO THE WARRANTY PERIODS DESCRIBED ABOVE (12
MONTHS OR 3 MONTHS, AS APPLICABLE). IN NO EVENT SHALL NINTENDO BE LIABLE FOR CONSEQUENTIAL OR
INCIDENTAL DAMAGES RESULTING FROM THE BREACH OF ANY IMPLIED OR EXPRESS WARRANTIES. SOME STATES
DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR EXCLUSION OF CONSEQUENTIAL
OR INCIDENTAL DAMAGES, SO THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
THIS WARRANTY SHALL NOT APPLY IF THIS PRODUCT: (a) IS USED WITH PRODUCTS NOT SOLD OR LICENSED BY
NINTENDO (INCLUDING, BUT NOT LIMITED TO, NON-LICENSED GAME ENHANCEMENT AND COPIER DEVICES,
ADAPTERS, SOFTWARE, AND POWER SUPPLIES); (b) IS USED FOR COMMERCIAL PURPOSES (INCLUDING RENTAL); (c)
IS MODIFIED OR TAMPERED WITH; (d) IS DAMAGED BY NEGLIGENCE, ACCIDENT, UNREASONABLE USE, OR BY
OTHER CAUSES UNRELATED TO DEFECTIVE MATERIALS OR WORKMANSHIP; OR (e) HAS HAD THE SERIAL NUMBER
ALTERED, DEFACED OR REMOVED.
WARRANTY LIMITATIONS
* In some instances, it may be necessary for you to ship the complete product, FREIGHT PREPAID AND INSURED FOR
LOSS OR DAMAGE, to Nintendo. Please do not send any products to Nintendo without contacting us first.
Please try our website at support.nintendo.com or call the Consumer Assistance Hotline at 1-800-255-3700 for troubleshooting information and repair or replacement options and pricing.*
SERVICE AFTER EXPIRATION OF WARRANTY
Nintendo warrants to the original purchaser that the product (games and accessories) shall be free from defects in
material and workmanship for a period of three (3) months from the date of purchase. If a defect covered by this warranty
occurs during this three (3) month warranty period, Nintendo will repair or replace the defective product, free of charge.*
GAME & ACCESSORY WARRANTY
Nintendo of America Inc. (“Nintendo”) warrants to the original purchaser that the hardware product shall be free from
defects in material and workmanship for twelve (12) months from the date of purchase. If a defect covered by this
warranty occurs during this warranty period, Nintendo will repair or replace the defective hardware product or component, free of charge.* The original purchaser is entitled to this warranty only if the date of purchase is registered at point
of sale or the consumer can demonstrate, to Nintendo’s satisfaction, that the product was purchased within the last 12
months.
HARDWARE WARRANTY
You may need only simple instructions to correct a problem with your product. Try our website at support.
nintendo.com or call our Consumer Assistance Hotline at 1-800-255-3700, rather than going to your retailer. Hours
of operation are 6 a.m. to 7 p.m., Pacific Time, Monday - Sunday (times subject to change). If the problem cannot be
solved with the troubleshooting information available online or over the telephone, you will be offered express factory
service through Nintendo. Please do not send any products to Nintendo without contacting us first.
Warranty and Service Information
To comply with FCC and IC RF exposure compliance requirements when using the Wii U console,
a separation distance of at least eight inches (20 cm) must be maintained between the antenna
of this device and all persons.
WARNING - RADIO FREQUENCY EXPOSURE
This product is restricted to indoor use only to reduce any potential for harmful interference with
licensed operation in the 5.15–5.25 GHz range.
Usage restrictions for the Wii U console and Wii U GamePad:
The user may find the following booklet prepared by the Federal Communications Commission
helpful: How to Identify and Resolve Radio-TV Interference Problems. This booklet is available
from the U.S. Government Printing Office, Washington, D.C., 20402, Stock No. 004-000-00345-4.
Consult the dealer or an experienced radio/TV technician or call Nintendo Consumer Service at
1-800-255-3700 for assistance.
ŘReorient or relocate the receiving antenna.
ŘIncrease the separation between the equipment and receiver.
onnect the equipment into an outlet on a circuit different from that to which the receiver is
ŘCconnected.
This equipment has been tested and found to comply with the limits of a Class B digital device,
pursuant to part 15 of the FCC Rules and the Canadian ICES-003 Class B specifications. These
limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
Changes or modifications not expressly approved by the manufacturer could void the user’s
authority to operate this device.
This device complies with Part 15 of the FCC Rules and RSS-210 of Industry Canada. Operation is
subject to the following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept interference received, including interference that may cause
undesired operation.
In order to comply with FCC radio-frequency radiation exposure guidelines for an uncontrolled
exposure, this device and its antenna must not be co-located or operating in conjunction with
any other antenna or transmitter.
FCC and Industry Canada Information
Regulations for Equipment Use in U.S.A. and Canada
Regulations for Equipment Use
53
Regulations for Equipment Use