- Computers & electronics
- Audio & home theatre
- MP3/MP4 players
- Docking speakers
- Movon
- TDU-ONYX
- User manual
advertisement
What’s in the box?
ONYX AC adapter 3.5mm stereo cable User manual
※ Please, use provided adapter only.
Getting to know the ONYX
LED
MFB (Multi Function Button)
Volume Control Wheel Speaker
MIC
ON/OFF Switch
AUX IN Port
-1-
Using your Speaker
TURING ON/OFF
Turning ON Turning OFF
CHARGE THE BATTERY
Before using speaker, charge the battery completely.
To charge the battery, connect the power supply to the speaker and plug it into a live AC outlet.
The Red LED remains on while the speaker is charging and Red LED will be off when charging is
completed.
-2-
CHECKING THE BATTERY LEVEL
The battery status indicator will be shown on iPhone or iPad
LOW BATTERY ALARM
When battery is low, speaker will alarm with beep every 1 minute.
Once you hear beep alert, please charge immediately.
TO BEGIN PAIRING WITH A BLUETOOTH DEVICES
1. Turn the ONYX on. When turned on for the first time, ONYX will go to pairing mode automatically.
Or Press the MFB button for 3 seconds until LED blinks as Blue.
-3-
2. Set you Mobile phone or Bluetooth device to Bluetooth discoverable mode. (Visibility on)
3. Set your Mobile phone or Bluetooth device to discover the ONYX, then locate the Bluetooth device
list.
4. From the Bluetooth device list, select the device named “ONYX”
5. If your devices asks for a passkey, enter digits 0000 (four zeros) and press OK.
6. Your Bluetooth devices indicates when pairing is completed.
The ONYX speaker announce as “Connected” when pairing is competed and Blue LED remains.
※ Auto Reconnection
ONYX will try to re-connect to the latest connected Bluetooth device when you turn on ONYX.
※ Simple Pairing
If your devices support Bluetooth v2.1 or higher version, you don’t need to passkey to pair.
※ Easy Pairing
The ONYX goes into pairing mode automatically for the first time you use it.
-4-
TO ADD ANOTHER SOURCE
You can use another audio device with ONYX. This requires using an 3.5mm stereo cable with
a 3.5mm plug on one end to connect with the AUX port on ONYX.
PLAYING MUSIC
Play / Pause Music: Press the MFB button shortly
MAKING A CALL
Last call redialing: Press MFB button twice.
Voice dialing : To activate or deactivate voice dialing, press the MFB button for 1 second.
[NOTE] Make sure your mobile phone is supported voice dialing function (Check your mobile phone instruction manual)
-5-
ANSWER / END A CALL
Press the MFB button.
DECLINE AN INCOMING CALL
Press the MFB button for 1 second.
Transfer a call from ONYX to Mobile phone (or Mobile phone to ONYX)
Press the MFB button for 1 second.
VOLUME CONTROLS
Increase and Decrease the volume using volume control wheel.
There will be beep sound on minimum and maximum volume level.
MUTING
Mute or Unmute the built-in microphone by holding MFB button for 3 seconds.
RESET THE ONYX
Press MFB button for 3 seconds on pairing mode stage.
-6-
Status
Status
Power On
Pairing mode
Disconnected mode
Connected mode
Making a call
Incoming call
Playing a music
Mute
Reset
Low battery
Charging
Charging complete
LED Lighting
LED flashes in Blue 3 times
LED flashes in Blue rapidly
LED flashes in Blue every 5 seconds
LED flashed in Blue 2 times every 5 seconds
LED flashed in Blue 3 times every 5 seconds
LED flashes in Blue 2 times every 2 seconds
LED flashes in Blue 3 times every 5 seconds
LED flashes in Blue 5 times
Steadily RED LED on
Red LED is turned off
Beep / Voice announcement
Power ON
Disconnected
Connected
Ring
Beep in every 10 seconds
Beep
-7-
Specification
Model Name
Bluetooth Core Spec
Profile
Bluetooth Class
Coverage Range
Continuous Play Time
Standby Time
Weight
Charging Voltage
Charging Time
Operating Temperature
Storage Temperature
Output Power
Battery
ONYX
Bluetooth Specification 3.0
HSP/HFP1.6(Wide Band Speech), A2DP, AVRCP
Class 2
10 Meters
approx. 10 Hours
approx. 500 Hours
1100g
DC 5.0 V
approx. 3 Hours
-10° to +50°C
-20° to +70°C
6 W (2 CH, 3 W x 2)
Lithium Polymer 3.7V 1500mAh
-8-
SAFETY AND GENERAL INFORMATION
1. Please read this guidebook carefully and follow the instruction.
2. To avoid any damage or malfunction of the unit, do not drop it from high place.
3. Keep away unit from humidity, water and any other liquid. And if the unit is exposed by water, moisture and other liquid directly, then
do not operate it normally to avoid any electrical shock, explosion and damage of the unit.
4. Do not place or keep the unit near the heat sources such as direct sun light, radiators, stoves or other apparatus which produce heat.
It may cause explosion, degrade of performance and reduce battery life.
5. Do not modify, repair & disassemble unit at discretion (especially battery: it may cause an explosion.
6. Do not place the heavy objects on the unit.
7. Use only supplied and approved charger.
8. Replacement or service must be done at a qualifi ed service center or manufacturer.
9. Unplug this unit when unused for long period of time or during lightening storms.
[ CAUTIONS ] ELECTRIC SHOCK HAZARD
The battery used in this device may present a risk of fi re or chemical burn if mis-treated.
FCC WARNING
This equipment may generate or use radio frequency energy. Changes or modifi cations to this equipment may cause harmful interference unless the modifi cations are expressly approved in the instruction manual.
The user could lose the authority to operate this equipment if an unauthorized change or modifi cation is made.
[ NOTE ] This equipment has been tested and found to comply with the limits for a Class B digital device, purchant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
is connected.
Consult the dealer or an experienced radio/TV technician for help.”
FCC RF Radiation Exposure Statement
1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
2. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be
installed and operated with a minimum distance of 20 centimeters between the radiator and your body.
EU
This product is CE marked according to the provision of the R&TTE Directive (99/5/EC).
Here by MOVON Corporation, declares that this product is in compliance with the essential requirements and other relevant provisions of
Directive 1999/5/EC. Please note that this product uses radio frequency bands not harmonized within EU.
Within the EU this product is intended to be used in Austria, Belgium, Denmark, Finland, France,Germany, Greece, Ireland, Italy, Luxembourg, The Netherlands, Portugal, Spain, Sweden, United Kingdom and within EFTA in Iceland, Norway and Switzerland.
Bluetooth is a trademark owned by the Bluetooth SIG, Inc.
WARRANTY
The condition of this warranty and our responsibilities under this warranty are as follows:
Supplier’s warranty is non-transferable. And this warranty is limited to the original purchaser only.
You must be able to prove the date of original purchase of the unit with a dated receipt.
The warranty is not applicable if the product has been subject to physical abuse, improper installation, modifi cation or repair
by unauthorized third party.
The responsibility of supplier’s products shall be limited to the repair or replacement of the product at it’s sole discretion.
Specifi cally exempt from any warranty are limited-life consumable components subject to normal wear and tear such as batteries,
decorates and other accessories.
A supplier will not take any responsibility if the failure of the unit has resulted from accident, abuse,misuse or any unauthorized repair,
modifi cation or disassemble.
Modifi cation and repair of the unit should be done by authorized and qualifi ed service personnel,center or returned to the manufacturer.
This warranty gives you specifi c legal rights and you may also have other rights which vary under local laws.
WEEE SYMBOL INFORMATION
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or its literature, indicates that it should not be disposed with other household wastes at the end of its working life.
To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product or their local government offi ce, for details of where
and how they can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.
[ IMPORTANT NOTE ] To comply with RF exposure requirements, this device may not be co-located with any other transmitter
or antenna.
Troubleshooting
Speaker will not turn on Make sure ONYX is charged or connected to AC outlet
No audio from Bluetooth devices Turn up the volume on your Bluetooth devices or Bluetooth devices.
Make sure the ONYX is not muted.
Your Bluetooth devices may be out of range.
Make sure your Bluetooth devices is not connected to ONYX.
Hearing Distortion
Unable to connect
Make sure ONYX is charged up.
Make sure ONYX is not out of range.
Make sure your devices is Bluetooth compatible.
Make sure the Bluetooth capability on your device is turned on.
Your Bluetooth devices may be out of range.
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project