Samsung Galaxy Core Prime smartphone User Manual

Below you will find brief information for smartphone Galaxy Core Prime. The Galaxy Core Prime is a smartphone that offers a range of features, including a bright and vibrant display, a powerful processor, and a long-lasting battery. The Galaxy Core Prime is also equipped with a 5MP camera that allows you to capture high-quality photos and videos. You can use the Galaxy Core Prime to make calls, send text messages, browse the internet, and download and play apps from the Google Play Store.

PDF

Document

This document is watermarked because certain important information in the document has not yet been verified.

This document has been sent to you as a draft and for informational purposes only.

The document should only be used for internal purposes and may not be distributed outside of the company.

Distributing the document outside of the company could result in legal exposure to the company if the preliminary, unverified information in the draft turns out to be inaccurate.

S M A R T P H O N E

User Manual

Please read this manual before operating your device and keep it for future reference.

DRAFT

FOR INTERNAL USE ONLY

Legal Notices

Warning : This product contains chemicals known to the State of California to cause cancer and reproductive toxicity.

Disclaimer of Warranties;

Exclusion of Liability

Intellectual Property

All Intellectual Property, as defined below, owned by or which is otherwise the property of Samsung or its respective suppliers relating to the SAMSUNG

Phone, including but not limited to, accessories, parts, or software relating there to (the “Phone

System”), is proprietary to Samsung and protected under federal laws, state laws, and international treaty provisions. Intellectual Property includes, but is not limited to, inventions (patentable or unpatentable), patents, trade secrets, copyrights, software, computer programs, and related documentation and other works of authorship. You may not infringe or otherwise violate the rights secured by the Intellectual Property. Moreover, you agree that you will not (and will not attempt to) modify, prepare derivative works of, reverse engineer, decompile, disassemble, or otherwise attempt to create source code from the software.

No title to or ownership in the Intellectual Property is transferred to you. All applicable rights of the

Intellectual Property shall remain with SAMSUNG and its suppliers.

EXCEPT AS SET FORTH IN THE EXPRESS

WARRANTY CONTAINED ON THE WARRANTY

PAGE ENCLOSED WITH THE PRODUCT, THE

PURCHASER TAKES THE PRODUCT “AS IS”, AND

SAMSUNG MAKES NO EXPRESS OR IMPLIED

WARRANTY OF ANY KIND WHATSOEVER WITH

RESPECT TO THE PRODUCT, INCLUDING BUT

NOT LIMITED TO THE MERCHANTABILITY OF THE

PRODUCT OR ITS FITNESS FOR ANY PARTICULAR

PURPOSE OR USE; THE DESIGN, CONDITION OR

QUALITY OF THE PRODUCT; THE PERFORMANCE

OF THE PRODUCT; THE WORKMANSHIP OF THE

PRODUCT OR THE COMPONENTS CONTAINED

THEREIN; OR COMPLIANCE OF THE PRODUCT

WITH THE REQUIREMENTS OF ANY LAW, RULE,

SPECIFICATION OR CONTRACT PERTAINING

THERETO. NOTHING CONTAINED IN THE

INSTRUCTION MANUAL SHALL BE CONSTRUED

TO CREATE AN EXPRESS OR IMPLIED WARRANTY

OF ANY KIND WHATSOEVER WITH RESPECT TO

THE PRODUCT. IN ADDITION, SAMSUNG SHALL

NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND

RESULTING FROM THE PURCHASE OR USE OF

THE PRODUCT OR ARISING FROM THE BREACH

OF THE EXPRESS WARRANTY, INCLUDING

INCIDENTAL, SPECIAL OR CONSEQUENTIAL

DAMAGES, OR LOSS OF ANTICIPATED PROFITS

OR BENEFITS.

Open Source Software

Some software components of this product incorporate source code covered under GNU

General Public License (GPL), GNU Lesser

General Public License (LGPL), OpenSSL

License, BSD License and other open source licenses. To obtain the source code covered under the open source licenses, please visit: http://opensource.samsung.com

Modification of Software

SAMSUNG IS NOT LIABLE FOR PERFORMANCE

ISSUES OR INCOMPATIBILITIES CAUSED BY

YOUR EDITING OF REGISTRY SETTINGS, OR

YOUR MODIFICATION OF OPERATING SYSTEM

SOFTWARE.

USING CUSTOM OPERATING SYSTEM SOFTWARE

MAY CAUSE YOUR DEVICE AND APPLICATIONS

TO WORK IMPROPERLY. YOUR CARRIER MAY

NOT PERMIT USERS TO DOWNLOAD CERTAIN

DRAFT

FOR INTERNAL USE ONLY

Legal Notices i TF_SM-S820L_Eng_UM_NI3_TN_102914_R2

SAFE

™

(Samsung For Enterprise)

SAFE ™ : “SAFE ™ ” (Samsung for Enterprise) is a mark for a Samsung device which has been tested against

Samsung’s own internal criteria for interoperability with certain third party security-related solutions for MDM and VPN. The testing includes field testing with local network connection and menu tree testing which tests functionality of the solutions in conjunction with the Samsung device. During the testing, the device is tested with the security solutions to see if the solutions work with the device as described by the third party security solution providers. The testing, for example, includes field testing with local network connection and menu tree testing which tests functionality of the solutions in conjunction with the Samsung device. For more information about Samsung’s SAFE ™ program, please refer to www.samsung.com/us/safe .

For complete statement of limited warranty, please refer to www.samsung.com/us/safe , available on the web and where Samsung smartphones and mobile devices are sold. [091714]

Samsung Telecommunications

America (STA), LLC

Headquarters:

1301 E. Lookout Drive

Richardson, TX 75082

1-800-SAMSUNG (726-7864)

1-888-987-HELP (4357)

Internet Address: www.samsung.com

Disclaimer of Warranties: EXCEPT AS OTHERWISE

PROVIDED IN THEIR STANDARD END USER

LICENSE AND WARRANTY, TO THE FULL EXTENT

PERMITTED BY LAW SAMSUNG ELECTRONICS

CO., LTD., SAMSUNG TELECOMMUNICATIONS

AMERICA, LLC, AND THEIR AFFILIATES

(COLLECTIVELY REFERRED TO HEREIN AS THE

“SAMSUNG ENTITIES”) EXPRESSLY DISCLAIM

ANY AND ALL WARRANTIES, EXPRESS OR

IMPLIED, INCLUDING ANY WARRANTY OF

MERCHANTABILITY, FITNESS FOR A PARTICULAR

PURPOSE, INTEROPERABILITY OR NON-

INFRINGEMENT, WITH RESPECT TO INFORMATION

TECHNOLOGY SECURITY PROTECTION, SAFE ™

DEVICES AND APPLICATIONS TESTED WITH

SAFE ™ DEVICES. IN NO EVENT SHALL THE

SAMSUNG ENTITIES BE LIABLE FOR ANY

DIRECT, INDIRECT, INCIDENTAL, PUNITIVE, OR

CONSEQUENTIAL DAMAGES OF ANY KIND

WHATSOEVER WITH RESPECT TO INFORMATION

TECHNOLOGY SECURITY PROTECTION, SAFE ™

DEVICES OR APPLICATIONS TESTED WITH SAFE ™

DEVICES. In addition, information technology security protection will be a ﬀ ected by features or functionality associated with, among other things the e-mail platform, master data management, and virtual private network solutions selected by the software provider, solution provider or user. Choice of an e-mail, master data management, and virtual private network solution is at the sole discretion of the software provider, solution provider or user and

Samsung, Galaxy, Galaxy Note, S Pen, Multi window, and S Health are registered trademarks of

Samsung Electronics Co., Ltd.

Do you have questions about your

Samsung Mobile Phone?

For 24 hour information and assistance, we o ﬀ er a new FAQ/ARS System (Automated Response

System) at: www.samsung.com/us/support

The actual available capacity of the internal memory is less than the specified capacity because the operating system and default applications occupy part of the memory. The available capacity may change when you upgrade the device.

Nuance ® , VSuite ™ , T9 ® Text Input, and the Nuance logo are trademarks or registered trademarks of

Nuance Communications, Inc., or its a ﬃ liates in the

United States and/or other countries.

The Bluetooth ® word mark, figure mark (stylized “B

Design”), and combination mark (Bluetooth word mark and “B Design”) are registered trademarks and are wholly owned by the Bluetooth SIG.

microSD ™ and the microSD logo are Trademarks of the SD Card Association.

any associated e ﬀ DRAFT the software provider, solution provider or user.

FOR INTERNAL USE ONLY

Legal Notices ii

Google, the Google logo, Android, the Android logo,

Google Play, Gmail, Google Maps, Google Music,

Google Hangouts, Picasa, Play Newsstand, YouTube, and other marks are trademarks of Google Inc.

Wi-Fi is a registered trademark of the

Wireless Fidelity Alliance, Inc.

Swype and the Swype logos are trademarks of

Swype, Inc.

Online Legal Information

The online version of the Health/Safety and

Warranty guide for your device can be found at:

English www.samsung.com/us/Legal/Phone-HSGuide

Spanish www.samsung.com/us/Legal/Phone-HSGuide-SP

The online version of the End User Licensing

Agreement for your device can be found online at: www.samsung.com/us/Legal/SamsungLegal-EULA1 .

Legal Notices

DRAFT

FOR INTERNAL USE ONLY iii

DRAFT

FOR INTERNAL USE ONLY iv

Getting Started

Learn about your mobile device hardware, assembly procedures, and how to get started using your new device.

DRAFT

FOR INTERNAL USE ONLY

Front View

Headset jack

Earpiece Proximity and gesture sensors

Status light

Front camera

Volume

Power/Lock key

FPO

Recent apps Home key

Back key

• Back key : Tap to return to the previous screen, or to close a dialog box, menu, or keyboard.

• Earpiece : Listen to a call.

• Front camera : Take self-portraits and record videos of yourself.

• Headset jack : Connect an optional headset

(not included).

• Home key : Tap to return to the Home screen.

• Proximity and gesture sensors : Detects the presence of objects near the device.

• Power/Lock key : Press and hold to turn the device on or o ﬀ . Press to lock or wake up the screen. Press and hold to turn the device o ﬀ or restart it, or for quick access to Airplane Mode,

Emergency Mode, and to Mute, Vibrate, and

Sound modes.

• Status Light : Displays red when charging or the battery is low, blue when a notification has arrived or you are voice recording, and green when fully charged.

• Volume : Press to adjust the volume of your device’s sounds and audio.

• Recent apps : Tap to display recent apps or touch

DRAFT

FOR INTERNAL USE ONLY

Getting Started 2 Front View

Back View

Flash

Microphone

Infrared transmitter

Camera

FPO

Speaker

Microphone

USB charger/Accessory port

• Camera : Take pictures and record videos.

• Flash : Illuminate subjects in low-light environments when taking a photo or recording video.

• Infrared transmitter : Controls external devices using infrared light.

• Microphone : Records audio and detects voice commands.

• Speaker : Plays music and other sounds.

• USB charger/Accessory port : Connect the

Charger/USB cable (included), and other optional accessories (not included).

Getting Started

DRAFT

FOR INTERNAL USE ONLY

3 Back View

Assemble Your Device

Prior to use, it is necessary to install the SIM card, optional memory card (not included), and

the battery.

Remove the Back Cover

FPO

Warning : Do not bend or twist the back cover excessively. Doing so may damage the cover.

Install the SIM Card

When you subscribe to a cellular network, you are provided with a plug-in SIM card. During activation, your SIM card will be loaded with your subscription details, such as your PIN, available optional services, and other features.

Warning : Please be careful when handling the SIM card to avoid damaging it. Keep all SIM cards out of reach of small children.

FPO

1. Remove the back cover using the slot near the top of your phone.

2. Lift the cover up and away from the phone.

FPO

► Carefully slide the SIM card into the SIM card slot until the card locks into place.

Make sure that the card’s gold contacts face into the device and that the angled corner of the card is positioned as shown.

Caution : If the card is not inserted correctly, the device will not detect the SIM card. Re-orient the card and place it back into the slot if the SIM is not detected.

Getting Started

DRAFT

FOR INTERNAL USE ONLY

4 Assemble Your Device

Install a Memory Card

You can install an optional microSD or microSDHC memory card (not included) to expand available memory space.

Note : A memory card can be installed at any time; it is not necessary to install it prior to using the device.

For more information on installing a memory card,

see Install a Memory Card .

Install the Battery

FPO

1. Insert the battery into the opening on the back of the phone, making sure the connectors align.

2. Gently press down to secure the battery.

Replace the Back Cover

Charge the Battery

Your device is powered by a rechargeable, standard

Li-Ion battery. A Wall/USB Charger (charging head and USB cable) is included with the device for charging the battery from any standard outlet.

The battery comes partially charged. A fully discharged battery requires up to four hours of charge time. You can use the device while charging.

Caution : Use only Samsung-approved charging devices and batteries. Samsung accessories are designed to maximize battery life. Using other accessories may invalidate your warranty and may cause damage.

FPO

1. Place the battery cover onto the back of the phone and press down.

1. Insert the USB cable into the port.

2. Connect the USB cable to the charging head, and then plug the charging head into a standard outlet.

2. Press along the edge of the back cover until you have a secure seal.

DRAFT

FOR INTERNAL USE ONLY

Getting Started 5 Assemble Your Device

FPO

3. When charging is complete, unplug the charging head from the outlet and remove the USB cable from the device.

Caution : Failure to unplug the wall charger before you remove the battery, can cause damage to the device.

When to Charge the Battery

When the battery is weak and only a few minutes of operation remain, the battery icon ( ) blinks and the device sounds a warning tone at regular intervals.

In this condition, your device conserves its remaining battery power by dimming the screen.

When the battery level becomes too low, the device automatically turns o ﬀ .

► For a quick check of your battery level, view the battery charge indicator located in the

Status Bar of your device’s display. A solid color

( ) indicates a full charge.

You can also choose to display a percentage value. Viewing a percentage value can provide a better idea of the remaining charge on the battery. For more information, see

Battery .

Getting Started

DRAFT

FOR INTERNAL USE ONLY

6 Assemble Your Device

Set Up Your Device

Turn Your Device On and O

ﬀ

Turning the Device On

► Press and hold the Power/Lock key until the device vibrates and starts up.

Turning the Device O

ﬀ

1. Press and hold the Power/Lock key until the device vibrates and the Device options menu displays.

2. Tap Power o ﬀ .

Welcome Screen

The first time you turn your device on, the Welcome

Screen displays. It will guide you through the basics of setting up your device.

Follow the prompts to choose a default language, connect to a Wi-Fi network, set up accounts, choose location services, learn about your device’s features, and more.

Secure Your Device

Use your device’s screen lock features to secure your device.

Lock the Device

By default, the device locks automatically when the screen times out.

► To lock the device, press the Power/Lock key.

Unlock the Device

The default Screen lock on your device is Swipe.

► To unlock your device, press the Power/Lock key or Home key, and then touch and drag your finger across the screen.

Set Up a Secure Screen Lock

The default Screen lock is Swipe, which o ﬀ ers no security. To choose a more secure screen lock, see

Set a Screen Lock

Getting Started

DRAFT

FOR INTERNAL USE ONLY

7 Set Up Your Device

Set Up Accounts on Your Device

Google Account

Your new device uses your Google Account to fully utilize its Android features, including Gmail,

Google Hangouts, and the Google Play Store.

When you turn on your device for the first time, set up your existing Google Account, or create a new

Google Account.

– or –

To create a new Google Account or set up your

Google Account on your device at any time, use

Accounts settings. For more information, see

Accounts

► From a Home screen, tap Apps >

Settings > Add account > Google .

Samsung Account

Create a Samsung account, for access to Samsung content and apps on your device.

When you turn on your device for the first time, set up your existing Samsung account, or create a new

Samsung account.

– or –

To create a new Samsung account or set up your

Samsung account on your device at any time, use Accounts settings.

For more information, see

Accounts

► From a Home screen, tap Apps > Settings

> Add account > Samsung account .

Getting Started

DRAFT

FOR INTERNAL USE ONLY

8 Set Up Accounts on Your Device

Know Your Device

Learn some of the key features of your mobile device, including the screens and icons, as well as how to navigate the device and enter text using the keyboard.

Warning : Please note that a touch screen responds best to a light touch from the pad of your finger or a non-metallic stylus. Using excessive force or a metallic object when pressing on the touch screen may damage the tempered glass surface and void the warranty.

DRAFT

FOR INTERNAL USE ONLY

Home Screen

Notifications Icons

Status Icons

Status Bar

Widget

FPO

Home Screen Indicator

Apps Screen

• Apps Screen : Allows quick access to all of your applications.

• App Shortcuts : Shortcuts to your favorite applications.

• Home Screen Indicator : Indicates which

Home screen is presently displayed.

• Notification Icons : Display new messages and emails, notifications, available software updates, and so on.

App

Shortcuts

• Status Bar : Displays device status icons (right) and notification icons (left).

• Status Icons : Display information about the device, such as the network signal strength, battery level, the time, and so on.

• Widgets : Self-contained applications that run on the Home screen (not shortcuts).

Know Your Device

DRAFT

FOR INTERNAL USE ONLY

10 Home Screen

The Home screen is the starting point for using your device.

Customize your Home screen by adding application shortcuts, widgets, folders, and

using wallpapers.

Manage Home Screens

Your device comes with multiple Home screens to hold apps and widgets. You can rearrange the Home screens in a di ﬀ erent order.

1. From a Home screen, pinch the screen.

– or –

Touch and hold an empty space on the screen.

2. Use these options to manage screens:

• Add a screen : Scroll to the end of the screens, and then tap Add .

• Remove a screen : Touch and hold on a screen, and then drag it to Remove .

• Set a screen as the main Home screen :

Tap Main Home screen at the top of a screen. This screen displays when you press the Home Key.

• Change the order of screens : Touch and hold on a screen, and then drag to a new position.

App Shortcuts

You can use app shortcuts to launch an app from any Home screen.

Add a Shortcut to a Home Screen

1. From a Home screen, tap Apps .

2. Touch and hold an app shortcut, drag it to a

Home screen, and then release it.

Remove a Shortcut

1. Touch and hold an app shortcut to release it.

2. Drag the app shortcut to Remove and release it.

Note : Removing a shortcut does not delete the app, it just removes the shortcut from the Home screen.

Widgets

Widgets are self-contained apps that run on a

Home screen. There are all kinds of widgets, including links to a specific contact, Internet bookmarks, Gmail and email accounts, and many others.

Add a Widget to a Home Screen

1. Touch and hold an empty space on the screen, and then tap Widgets .

2. Touch and hold a widget, drag it to a

Home screen, and then release it.

Remove a Widget

1. From a Home screen, touch and hold a widget to release it.

2. Drag the widget to Remove and release it.

Note : Removing a widget does not delete the widget, it just removes the widget from the Home screen.

Know Your Device

DRAFT

FOR INTERNAL USE ONLY

11 Home Screen

Folders

Place folders on a Home screen to organize items.

Add a Folder to a Home Screen

1. From a Home screen, touch and hold an app shortcut.

2. Drag the shortcut onto Create folder and release.

3. Enter a folder name.

4. Tap Add to place additional apps in the folder.

5. Tap Done . A folder is created with the shortcut(s) inside.

Using Folders

1. Tap a folder to open it and access the shortcuts inside.

2. To add shortcuts to a folder, touch and hold the shortcut, and then drag it onto the folder and release.

3. To delete a folder, touch and hold the folder until it detaches, and then drag it to Remove and release.

4. Tap More options to change the folder’s color scheme.

Change the Wallpaper

Change the look of the Home and Lock screens with wallpaper. You can display a favorite picture or choose from preloaded wallpapers.

1. From a Home screen, pinch the screen.

– or –

Touch and hold an empty space on the screen.

2. Tap Wallpapers , and then choose Home screen ,

Lock screen , or Home and lock screens .

3. Tap a wallpaper to see a sample, and then tap

Set wallpaper .

Know Your Device

DRAFT

FOR INTERNAL USE ONLY

12 Home Screen

Status Bar

The Status Bar at the top of the

Home screen provides device information (such as network status, battery charge, and time) on the right side and notification alerts on the left.

Status Icons

Battery is fully charged.

Battery is low. The yellow area turns red as the charge level becomes critical.

Battery is charging.

Vibrate mode is enabled.

Mute mode is enabled.

The device is connected to a 4G LTE wireless network.

Signal strength.

Wi-Fi is active.

No wireless network is available.

Notification Icons

Missed call.

Call in progress.

Call is on hold.

Call is using speakerphone.

New email has arrived.

New Gmail has arrived.

New voicemail message has been received.

New text or multimedia message has arrived.

Download of a file or app is in progress.

File is being uploaded or sent.

Location service (GPS) is active.

App updates are available from the

Google Play Store.

App updates are complete.

Keyboard is in use.

Connected to a computer using a

USB cable.

DRAFT

FOR INTERNAL USE ONLY

13 Know Your Device Status Bar

Navigation, Motions, and Gestures

Touchscreen Navigation

Tap

Lightly tap items to select or launch them.

• Tap the on screen keyboard to enter characters or text.

• Tap an item to select it.

• Tap an app icon to launch the application.

Touch and Hold

Activate onscreen items by a touch and hold gesture. For example:

• Touch and hold a widget on the Home screen to move it.

• Touch and hold a field to display a pop-up menu of options.

Swipe or Slide

To swipe, lightly drag your finger vertically or horizontally across the screen.

• Swipe the screen to unlock the device.

• Swipe the screen to scroll through the

Home screens or menu options.

Drag

To drag, touch and hold on an item, and then move it to a new location.

• Drag an app shortcut to add it to a Home screen.

• Drag a widget to a place it in a new location on a

Home screen.

Know Your Device

Pinch and Spread

Pinch the screen using your thumb and forefinger or spread by moving your fingers apart.

• Pinch or spread the screen to zoom in or out while viewing a picture or a web page.

• Pinch or spread the screen to zoom in or out while taking a picture.

DRAFT

FOR INTERNAL USE ONLY

14 Navigation, Motions, and Gestures

Notification Panel

Settings

View additional

Quick settings

Adjust screen brightness

Tap notification to launch app or view detail

FPO

Clear all notifications

Notification icons display on the Status Bar displaying calendar events, device status, and more. For details about these notifications, open the

Notification Panel.

Quick Settings

In addition to notifications, the Notification Panel also provides quick access to device functions such as Wi-Fi, allowing you to quickly turn them on or o ﬀ .

To view additional Quick settings:

► Swipe left or right across the visible icons.

– or –

Tap View all .

View the Notification Panel

1. Swipe down on the Status Bar to display the

Notification Panel.

2. Scroll down the list to see notification details.

• Tap an item to open it.

• To clear a single notification, drag the notification left or right. Tap Clear to clear all notifications.

3. To close the Notification Panel, swipe upward from the bottom of the screen or tap the

Back key.

Notification Panel Settings

To customize the Notification Panel, see

Notification Panel

DRAFT

FOR INTERNAL USE ONLY

Know Your Device 15 Notification Panel

Entering Text

Using the Samsung

Keyboard

Type your text input using a QWERTY keyboard.

Predictive Text

FPO

Configure the Samsung Keyboard

To customize the Samsung Keyboard, see

Samsung Keyboard Settings

Using Google Voice Typing

Instead of typing, speak your text input.

FPO

Options key

Special Keys

123

Sym

Tap to insert numbers and symbols.

Tap to insert letters.

Touch and hold the Options key to:

Use Google Voice Typing.

Use your handwriting to enter text.

Access the clipboard.

Access keyboard settings.

Insert emoticons.

Change the layout of the keyboard.

1. To enable Google Voice Typing:

• From a Home screen, tap Apps >

Settings > General tab > Language and input .

• Tap the check box next to Google voice typing to enable this feature.

2. On the Samsung Keyboard, tap Google Voice

Typing . You may need to touch and hold the

Options key (left of the Space key) to find it.

3. Speak your text.

Configure Google Voice Typing

To customize Google Voice Typing, see

Google Voice Typing Settings

Predictive Text

Predictive text suggest words matching your text entries, and, optionally, completes common words automatically. Predictive text can learn your personal writing style from your contacts, messages, email, and social networking sites — improving its accuracy of predicting your text entries.

DRAFT

FOR INTERNAL USE ONLY

Know Your Device 16 Entering Text

Calling

Make telephone calls using a variety of calling features and services.

DRAFT

FOR INTERNAL USE ONLY

Making and Answering Calls

Learn how to make or answer a call. Explore features and functionality associated with making or answering a call.

Make a Call

1. From a Home screen, tap Phone .

2. Enter a number and tap Dial .

Quickly Dial a Number from

Your

Contact

List

1. From a Home screen, tap Apps >

Contacts .

2. While viewing your contact list, swipe your finger across a contact to the right call the contact.

Dial a Recent Number

All incoming, outgoing, and missed calls are recorded in the Call log. If the number or caller is listed in your contacts list, the associated name is also displayed.

1. From a Home screen, tap Phone .

2. Tap the Logs tab. A list of recent calls is displayed.

3. Tap a contact, and then tap Call .

End a Call

► When you are ready to end your call, tap End .

Answer a Call

When a call is received the phone rings and displays the caller’s phone number, or name if stored in the contacts list.

1. At the incoming call screen:

• Touch and drag Answer in any direction to answer the call.

• Touch and drag Reject in any direction to reject the call and send it to your voicemail.

2. Tap End call .

Multitasking While on a Call

If you exit the call screen and return to a Home screen, your active call is indicated by an icon on the Status bar.

This lets you continue with your current call and do something else, such as access the contacts list, view a recent email, locate a picture, and so on.

To return to the call screen:

► Tap the reactivate button to return to the call screen.

To end a call from any application:

► Swipe the Status bar downward to reveal the

Notification Panel, and then tap End call .

Making and Answering Calls

DRAFT

FOR INTERNAL USE ONLY

18 Making and Answering Calls

Options During a Call

Your phone provides a number of functions that you can use during a call.

Adjusting the Call Volume

► Press the Volume Key to increase or decrease the volume.

– or –

Quickly add more volume to the incoming audio by tapping More options > Extra volume .

Listen with the Speaker or

Bluetooth

Headset

Listen to the call using the speaker or through a

Bluetooth headset (not included).

► Tap Speaker to hear the caller using the speaker.

– or –

Tap Bluetooth to use a Bluetooth headset

(not included).

Personalize the Call Sound Setting

Adjust the sound by using an audio equalizer.

► From the currently active call, tap

More options > Personalize call sound .

Place a New Call While in a Call

If your service plan supports this feature, you can make another call while a call is in progress.

1. From the active call, tap Add call to dial the second call. The first call is displayed as a thumbnail.

2. Dial the new number and tap Dial .

• Tap Swap to switch between the two calls.

• Tap Merge to hear both callers at once

(multi conferencing).

Call Waiting

If your service plan supports this feature, you can answer an incoming call while you have a call in progress. You are notified of an incoming call by a call waiting tone.

To answer a new call while you have a call in progress:

1. Slide Answer in any direction to answer the new call.

2. Tap an option:

• Putting [Caller] on hold to place the previous caller on hold while you answer the new incoming call.

• Ending call with [Caller] to end the previous call and answer the new call.

3. Tap the previous On hold number entry and select Swap to switch between the two calls.

This places the new caller on hold and activates the previous call.

Call Log

The numbers of the calls you have dialed, received, or missed are stored in the Call log.

1. From a Home screen, tap Phone .

2. Tap the Logs tab. A list of recent calls is displayed. If the caller is in your contacts list, the caller’s name is displayed.

Save a Recent Call to Your Contacts List

1. From a Home screen, tap Phone > Logs tab.

2. Tap the call that contains the information that you want to save to your contacts list.

3. Tap Create contact .

– or –

If you want to replace the number for an existing contact, tap Update existing .

Making and Answering Calls

DRAFT

FOR INTERNAL USE ONLY

19 Making and Answering Calls

Delete a Call from the Call Log

1. From a Home screen, tap Phone > Logs tab.

2. Touch and hold the call you want to delete from the Call log.

3. Tap Delete .

Make an Emergency Call

The Emergency calling mode makes redialing an emergency number a one-tap process.

Note : This mode can drain your battery power more rapidly than normal calling mode.

Add a Call to the Reject List

By adding a caller to your Reject list, future calls from this number will be sent directly to your voicemail.

1. From a Home screen, tap Phone > Logs tab.

2. Touch and hold the caller you want to add to the

Reject list.

3. Tap More options > Add to Auto reject list .

Make an Emergency Call without a

SIM

Card

Without a SIM card, you can only make an emergency call with the phone; normal cell phone service is not available.

1. From the Lock screen, tap Emergency call .

2. Enter 911 and tap Dial .

3. Complete your call. During this type of call, you will have access to the Speaker mode, Keypad, and End Call features.

4. Tap End call .

Make a Call Using Speed Dial

You can assign a shortcut number to a contact for speed dialing their default number.

To make a call using Speed Dial:

1. From a Home screen, tap Phone > Keypad .

2. Touch and hold the speed dial number.

If the speed dial number is more than 1 digit long, enter the first digits, then hold the last digit.

Make an Emergency Call with a SIM Card

1. From a Home screen, tap Phone .

2. Enter the emergency number (example: 911), then tap Dial .

Create a Speed Dial

1. From a Home screen, tap Apps >

Contacts .

2. Tap More options > Speed dial . The Speed dial screen displays showing the numbers 1 through 100. Number 1 is reserved for voicemail.

3. Tap an unused number. A list of contacts displays.

4. Tap a contact to assign to the number.

The selected contact displays in the speed dial number box.

Call Settings

To access the Call settings menu:

► From a Home screen, tap Phone >

More options > Settings > Call .

– or –

From a Home screen, tap Apps > Settings

> Call .

To remove a Speed Dial number assignment:

► Tap Remove .

DRAFT

FOR INTERNAL USE ONLY

Making and Answering Calls 20 Making and Answering Calls

Applications

The Apps screen displays all applications installed on your device, both preloaded apps and apps you download and install yourself.

Learn how to change the way apps appear, organize apps into folders, and uninstall or disable apps.

DRAFT

FOR INTERNAL USE ONLY

Apps Screen

The Apps screen shows all preloaded apps and apps that you downloaded. You can uninstall, disable, or hide apps from view.

Shortcuts to apps can be placed on any of the Home screens. For more information, see

Add a Shortcut to a Home Screen .

Accessing Applications

1. From a Home screen, tap Apps .

2. Tap an application’s icon to launch it.

3. To return to the main Home screen, press the

Home key.

Download and Install New

Apps

Find new apps to download and install on your device:

• Play Store : Download new apps from the Google Play Store. Visit play.google.com/store/apps to learn more.

• GALAXY Apps : View and download Samsung apps that are optimized for use with GALAXY devices. Visit apps.samsung.com

to learn more.

Uninstall or Disable Apps

You can uninstall or disable apps you download and install.

• Preloaded apps cannot be uninstalled.

• Apps that are disabled are turned o ﬀ and hidden from view.

1. From a Home screen, tap Apps .

2. Tap More options > Uninstall/disable apps .

Apps that can be uninstalled show Delete on their icon.

3. Tap Delete and follow the prompts to either uninstall or disable the app.

Organize Your Apps

The Apps icons can be organized in folders and listed alphabetically or in your own custom order.

Change the Order Apps Are Listed

1. From a Home screen, tap Apps .

2. Tap More options > View as .

3. Tap an option:

• Custom : Allows you to touch and hold on apps to move them from screen to screen.

• Alphabetical order : Apps are arranged in a grid, in A-Z order.

Applications

DRAFT

FOR INTERNAL USE ONLY

22 Apps Screen

Use Folders to Organize Apps

1. From a Home screen, tap Apps .

2. Tap More options > Create folder .

3. Enter a folder name.

4. Tap Add , select apps to include in the folder, and then tap Done .

5. Touch a folder to view its apps.

• Touch an app to launch it.

• Touch More options to select a background color for the folder.

Hiding and Showing Apps

Hide Apps from View

You can hide (rather than uninstall or disable) any apps you do not want to see on the Apps screen.

1. From a Home screen, tap Apps .

2. Tap More options > Hide apps .

3. Tap apps to hide, and then tap Done .

Show Hidden Apps

You can unhide apps you have hidden and put them back on the Apps screen.

1. From a Home screen, tap Apps .

2. Tap More options > Show hidden apps .

3. Tap apps to unhide, and then tap Done .

Apps Screen Options

1. From a Home screen, tap Apps .

2. Tap More options for these options:

• Edit : Touch and hold an app icon then drag it to:

Create folder to create a new folder.

App info to view information about this app.

Disable/Delete to remove the app

• View as : Configure the Apps screen.

• Downloaded applications : View downloaded applications.

• Uninstall/disable apps : Uninstall an app that you downloaded to your device, or disable a preloaded app (preloaded apps cannot be uninstalled). Touch Delete to remove or disable the selected app.

• Hide apps : Hide apps from the Apps screen.

• Show disabled apps : Display disabled apps.

• Show hidden apps : Display hidden apps.

Applications

DRAFT

FOR INTERNAL USE ONLY

23 Apps Screen

Google Applications

Enjoy these applications from

Google.

Google Settings

Quickly and easily change Google app settings to suit your preferences.

Note : Certain applications require a Google account.

Visit google.com

to learn more.

Note : You must be signed in to the application you want to configure. For example, sign in to Google+ to configure

Google+ settings.

Chrome

Use Google Chrome to browse the

Internet and bring your open tabs, bookmarks and address bar data from your computer to your mobile device.

Google+

Stay connected and share with Google+.

Chat with friends and family, post photos, and see what others are sharing.

Drive

Open, view, rename, and share your

Google Docs and files.

Gmail

Send and receive email with Gmail,

Google’s web-based email service.

Hangouts

Hangouts is an online place to meet friends and family, share photos, and host video calls. Conversation logs are automatically saved to a Chats area in your Gmail account.

Google

Search not only the Internet, but also the apps and contents of your device.

Maps

Use Google Maps to find your current location, get directions, and other location-based information.

Google Now

Google Now works in the background to collect information you regularly look up and organize it into convenient cards that appear when you need them.

► Press and hold the Home key.

Note : When Google Now is enabled, you can also access it by touching .

Note : You must enable location services to

use Maps. Please see Location Services .

Photos

This application automatically backs up your photos and videos to your Google+ account.

Play Books

DRAFT

With Google Play Books, you can find millions of free e-books and hundreds of thousands more to buy in the eBookstore.

FOR INTERNAL USE ONLY

Applications 24 Google Applications

Play Games

Discover hundreds of games for download and purchase through the Google Play

Store.

Play Movies & TV

Watch movies and TV shows purchased from Google Play. You can stream them instantly, or download them for viewing when you are not connected to the

Internet. You can also view videos saved on your device.

Play Music

With Google Play Music, you can play music and audio files on your device.

Play Newsstand

Subscribe to your favorite magazines to read on your device at your leisure.

Play

Store

Find new apps, movies and TV shows, music, books, magazines, and games in

Google Play Store.

Voice Search

Use voice commands to search the web with Google.

YouTube

View and upload YouTube videos right from your device

Applications

DRAFT

FOR INTERNAL USE ONLY

25 Google Applications

Calculator

The Calculator provides basic and advanced arithmetic functions.

Basic Operation

1. From a Home screen, tap Apps >

Calculator .

2. Enter the first number using the numeric keys.

3. Tap the appropriate arithmetic function key.

4. Enter the next number.

5. To view the result, tap the Equals key.

Additional Functions

To clear the results:

► Tap Clear .

To copy all or part of the calculation to the clipboard:

► Touch and hold an entry in the display field.

Scientific Calculator

Turn the device landscape to use advanced arithmetic functions, such as sin , cos , and tan .

Applications

DRAFT

FOR INTERNAL USE ONLY

26 Calculator

Calendar

Manage your events and tasks.

Create an Event or Task

1. From a Home screen, tap Apps >

Calendar .

2. Tap Add and use one of the following methods:

• Event : Enter an event with an optional repeat setting.

• Task : Enter a task with an optional priority setting.

3. Enter details for the event or task, and then tap Done .

Delete an Event or Task

1. From a Home screen, tap Apps >

Calendar .

2. Tap to view an event or task. Tap More options

> Delete .

– or –

To delete multiple events or tasks, tap

More options > Delete , select events or tasks, and then tap Delete .

Sharing Events

1. From a Home screen, tap Apps >

Calendar .

2. Tap to view an event or task.

3. Tap More options > Share via , select a sharing method, and follow the prompts.

Calendar Settings

These settings allow you to modify settings associated with using the Calendar.

1. From a Home screen, tap Apps >

Calendar .

2. Tap More options > Settings .

3. Tap an option and follow the prompts.

Applications

DRAFT

FOR INTERNAL USE ONLY

27 Calendar

Camera and Video

Switch between the front and back cameras

Quick settings

Camera settings

Current shooting mode

FPO

Tab S

G800

Current flash

mode

Storage location

Number of pictures you can take

Record video

Take a picture

Change shooting mode

View pictures and videos

in

the

Gallery

Taking Pictures

Take pictures with your device’s front or back camera.

Note : You can also press the Volume key up or down to take a picture. You can configure the Volume key to act as the video record key or as a zoom key.

1. From a Home screen, tap Apps > Camera .

2. Using the display screen as a viewfinder, compose your shot by aiming the camera at the subject. While composing your picture, use the onscreen options or these gestures:

• Touch the screen with two fingers and pinch or spread them on the screen to zoom in and out.

• Tap the screen to focus on the area you touched.

3. Tap to take the picture.

DRAFT

FOR INTERNAL USE ONLY

Applications 28 Camera and Video

Shooting Mode

Several visual e ﬀ ects are available. Some modes are not available when taking self-portraits.

1. From a Home screen, tap Apps > Camera .

2. Tap

MODE

MODE , and then scroll up or down the screen at the right side of the screen.

• Auto : Allow the camera to evaluate the surroundings and determine the ideal mode for the picture.

• Beauty face : Take a picture with lightened faces for gentler images.

• Panorama : Create a linear image by taking pictures in either a horizontal or vertical direction.

• Best photo : Take a series of pictures, and then select the best to save.

• Continuous shot : Take pictures continuously by pressing and holding the Camera button.

• Sports : Take clearer pictures of fast moving subjects.

Camera Settings

1. From a Home screen, tap Apps > Camera .

• Video size : Select a resolution. Use higher resolution for higher quality. Higher resolution videos take up more memory.

• Recording mode : Select Normal, Limit for email, or Fast motion mode.

• E ﬀ ects : Add special graphical e ﬀ ects.

• Flash : Activate or deactivate the flash.

• Timer : Take time-delayed pictures or videos.

• Location tags : Attach a GPS location tag to the picture.

• Storage location : Select the memory location for storage.

• White balance : Select an appropriate white balance, so images have a true-to-life color range. The settings are designed for specific lighting situations. These settings are similar to the heat range for white-balance exposure in professional cameras.

• Exposure value : Change the exposure value.

This determines how much light the camera’s sensor receives. For low light situations, use a higher exposure.

• Grid lines : Display viewfinder grid lines to help composition when selecting subjects.

• Shutter sound : Enable or disable the sound of a camera shutter when taking pictures.

• The Volume key : Use the Volume key as the camera key, the record key, or as a zoom key.

• Reset settings : Reset the camera settings.

2. Tap Settings to configure settings for

Camera. Available options vary depending on the camera/recording mode used.

• Picture size : Select a resolution. Use higher resolution for higher quality. Higher resolution pictures take up more memory.

• ISO : Select an ISO value. This controls camera light sensitivity. It is measured in film-camera equivalents. Low values are for stationary or brightly-lit objects. Higher values are for fast-moving or poorly-lit objects.

• Metering modes : Select a metering method. This determines how light values are calculated. Center-weighted measures background light in the center of the scene.

Spot measures the light value at a specific location. Matrix averages the entire scene.

• Tap to take pics

DRAFT preview screen to take pictures.

FOR INTERNAL USE ONLY

Applications 29 Camera and Video

Clock

The Clock app o

ﬀ

ers features for keeping track of time and setting alarms.

1. From a Home screen, tap Apps > Clock .

2. Tap a tab to use a feature:

• Alarm : This feature allows you to set an alarm to ring at a specific time.

• World clock : View the time of day or night in other parts of the world. World Clock displays time in hundreds of di ﬀ erent cities, within all

24 time zones around the world.

• Stopwatch : You can use this option to measure intervals of time.

• Timer : You can use this option to set a countdown timer. Use a timer to count down to an event based on a preset time length (hours, minutes, and seconds).

• Volume : If you have chosen an alarm type that includes sound, drag the slider to set the volume of the alarm.

• Snooze : Allow snoozing, and set interval and repeat values for the alarm while snoozing.

• Smart alarm : When on, the alarm will start playing a tone at a low volume at an interval before the alarm time, and slowly increase in volume. Choose a time interval and a tone to use with smart alarm. Available when you have chosen an alarm type that includes sound.

• Name : Enter a name for the alarm.

3. Tap Save .

Delete an Alarm

1. From a Home screen, tap Apps > Clock .

2. Touch and hold an alarm, and then tap

Delete .

Create an Alarm

Create an alarm event. You can set one-time or recurring alarms, and choose options for how to be notified.

1. From a Home screen, tap Apps > Clock .

2. Tap Create alarm to configure:

• Time : Choose a time for the alarm.

• Days : Choose the days to use this alarm.

• Repeat weekly : When enabled, the alarm repeats every week.

• Alarm type : Choose whether the alarm will use sound, vibration, or vibration and sound to alert you.

• Alarm tone : If you have chosen an alarm type that includes sound, choose a sound to play for the alarm.

DRAFT

FOR INTERNAL USE ONLY

Applications 30 Clock

Contacts

Store and manage your contacts with the Contacts app, which can be synchronized with a variety of your existing personal accounts, including Google,

Email, Facebook, and your

Samsung account.

For more information on connecting with and managing your accounts through your device, see

Accounts

Contacts

Access your list of contacts by using the Contacts app, which is a shortcut to the Contacts tab. To access your Contacts list:

► From a Home screen, tap Apps >

Contacts .

Add a Contact

Use the following procedure to add a new contact.

1. From a Home screen, tap Apps >

Contacts .

2. Tap Add , and then tap contact fields to enter information.

• Choose a storage account for the contact. You can store the contact on the device, your SIM card, or sync it with an account.

• Tap Photo to assign a picture to the new contact.

• Enter a name, phone number, email address, and assign the contact to a group. Tap

Add another field to add additional contact information.

Tap Add to enter another contact.

Tap Delete to remove an entry.

Tap Expand for additional fields.

Tap Label to choose a label for the field.

3. Tap Save .

Finding a Contact

You can search for a contact, or scroll the list to find one by name.

1. From a Home screen, tap Apps >

Contacts .

2. Tap the Search field, and then enter characters to find contacts that match.

– or –

Tap a letter on the side of the list to jump directly to that letter in the alphabetical list. You can also press and slide across the alphabetical list to select a letter with better precision.

Edit a Contact

When editing a contact, you can tap a field and change or delete the information, or you can add additional fields to the contact’s list of information.

1. From a Home screen, tap Apps >

Contacts .

2. Tap the contact to display it, and then tap

Edit .

3. Tap any of the fields to add, change, or delete information.

4. Tap Save .

DRAFT

FOR INTERNAL USE ONLY

Applications 31 Contacts

Share a Name Card

When you share a name card, the contact’s information is sent as a vCard file (.vcf). You can share a vCard via Bluetooth or Wi-Fi Direct, attach it to a message, or save it to a storage location.

1. From a Home screen, tap Apps >

Contacts .

2. Tap a contact to display it, and then tap

More options > Share name card via .

3. Choose a sharing method and follow the prompts.

Unlink Contacts

1. From a Home screen, tap Apps >

Contacts .

2. Tap the contact to display it, and then tap

Link .

3. Tap Remove beside contacts to unlink them from the main contact.

Delete Contacts

You can delete a single contact, or choose multiple contacts to delete.

Save a Business Card as a Contact

1. From a Home screen, tap Apps >

Contacts .

2. Tap More options > Business cards > Add .

1. From a Home screen, tap Apps >

Contacts .

2. Touch and hold a contact to select it. You can also tap other contacts, or choose

Select all .

3. When the camera opens, center the business card in the guidelines on the screen. If the

Camera can recognize the business card, it will take the picture automatically, or you can take the picture manually.

4. Your device analyzes the picture of the business card to create a new contact. You can also add more information to the contact.

5. Tap Save . The business card is displayed as the picture for the contact.

Note : You can view all your business cards by tapping

More options > Business cards .

3. Tap Delete .

Favorites

When you mark contacts as favorites, they are easily accessible from other apps. Favorites display together on the Favorites tab in Contacts.

Mark Contacts as Favorites

1. From a Home screen, tap Apps >

Contacts .

2. Tap a contact to display it, and then tap

Favorite (the star turns gold ).

Link Contacts

When you have contacts from various sources

(Gmail, Facebook, and so on), you may have multiple similar entries for a single contact. Contacts lets you link multiple entries into a single contact.

1. From a Home screen, tap Apps >

Contacts .

2. Tap the contact to display it, and then tap

Link .

3. Tap Link another contact , and then select contact(s) to link to the original contact.

4. Tap Done .

Remove Contacts from Favorites

1. From a Home screen, tap Apps >

Contacts .

2. Tap the Favorites tab, and then touch and hold a contact to select it. You can also tap other contacts, or choose Select all .

3. Tap Delete .

DRAFT

FOR INTERNAL USE ONLY

Applications 32 Contacts

Create a Shortcut to a Favorite

You can create a shortcut to a favorite on the home screen, to access their information directly from the home screen.

1. From a Home screen, tap Apps >

Contacts .

2. Tap the Favorites tab, and then touch and hold a contact to select it.

3. Tap More options > Add shortcut to home .

The new shortcut displays in an empty area of the home screen.

Groups

You can use groups to organize your contacts. Your device comes with preloaded groups, and you can create your own. You might create a group for your family, for coworkers, or a team. Groups make it easy to find contacts, and you can send messages to the members of a group.

Create a Group

1. From a Home screen, tap Apps >

Contacts .

2. Tap Groups , and then tap Add .

3. Tap fields to enter information about the group:

• Tap Create group in <location> to choose where to save the group. You can save it to a specific account, to the device memory, or to all accounts.

• Tap Group name to enter a name for the new group.

4. Tap Add member and select contact(s) to add to the new group, and then tap Done .

5. Tap Save .

Rename a Group

1. From a Home screen, tap Apps >

Contacts .

2. Tap Groups , and then tap a group.

3. Tap More options > Edit group and enter a new name.

4. Tap Save .

Add Contacts to a Group

1. From a Home screen, tap Apps >

Contacts .

2. Tap Groups , and then tap a group.

3. Tap Add , and then tap the contact(s) you want to add.

4. Tap Done .

Send an Email to a Group

You can send an email to members of a group.

1. From a Home screen, tap Apps >

Contacts .

2. Tap Groups , and then tap a group.

3. Tap More options > Send email .

4. Tap contacts to select them, or tap Select all , and then tap Done . (You will only see group members that have email addresses in their contact records.)

5. Choose an account and follow the prompts.

Delete a Group

Preset groups, such as Family, cannot be deleted.

1. From a Home screen, tap Apps >

Contacts .

2. Tap Groups .

3. Tap More options > Select .

4. Select groups to delete and tap Delete .

Applications

DRAFT

FOR INTERNAL USE ONLY

33 Contacts

Contact Settings

These settings allow you to modify settings associated with using the Contacts app.

1. From a Home screen, tap Apps >

Contacts .

2. Tap More options > Settings .

3. Tap an option and follow the onscreen instructions.

Applications

DRAFT

FOR INTERNAL USE ONLY

34 Contacts

Email

Use the Email app to view and manage all your email accounts in one application.

To access Email:

► From a Home screen, tap Apps > Email .

Configuring Email Accounts

You can configure Email for most accounts in just a few steps.

1. From a Home screen, tap Apps > Email .

2. Follow the onscreen instructions to set up your email account.

– or –

For additional accounts, tap More options >

Settings > Add account .

The device communicates with the appropriate server to set up your account and synchronize your email. When complete, your email appears in the

Inbox for the account.

Note : To configure email account settings at any time, tap More options > Settings . Tap the account to display Account settings.

Refreshing Your Email Account

Refresh your account to update your email accounts.

1. From a Home screen, tap Apps > Email .

2. Tap Refresh .

Managing Your Email Accounts

You can view email you receive for all accounts on the Combined view screen or you can view email accounts individually.

1. From a Home screen, tap Apps > Email .

2. Tap Menu at the top left of the screen to select:

• Combined view : View all email in a combined inbox.

• < Account Name >: View email for only this account.

Deleting Email Accounts

To delete an Email account:

1. From a Home screen, tap Apps > Email .

2. Tap More options > Settings .

3. Tap the account you want to delete, and then tap

Delete account .

Email Settings

These settings allow you to modify settings associated with using the Email app.

1. From a Home screen, tap Apps > Email .

2. Tap More options > Settings .

3. Tap an option and follow the onscreen instructions.

Applications

DRAFT

FOR INTERNAL USE ONLY

35 Email

GALAXY Apps

Samsung GALAXY Apps is a free storefront that provides a quick and easy way to find and download apps that are compatible with your Galaxy device.

GALAXY Essentials is a collection of specially chosen applications available through

Samsung Apps.

From GALAXY Essentials, you can access and download a collection of premium content, free of charge

To access the Samsung GALAXY Apps website:

► From a Home screen, tap Apps >

GALAXY Apps .

To access GALAXY Essentials:

1. Swipe across the Home screens and locate and tap the GALAXY Essentials widget.

2. Follow the onscreen instructions to download

GALAXY Essential apps specially chosen from

Samsung Apps.

Note : A Samsung account is required to purchase and download apps.

Applications

DRAFT

FOR INTERNAL USE ONLY

36 GALAXY Apps

Gallery

View, edit, and manage pictures and videos.

View Images and Videos

Launching Gallery displays available folders. When another application, such as Email, saves an image, a Download folder is automatically created to contain the image. Likewise, capturing a screenshot automatically creates a Screenshots folder.

1. From a Home screen, tap Apps > Gallery .

2. Tap Menu , and then tap Time or Album to choose the way items display.

3. Tap Menu > Album , and then tap

More options > Create album to create a new album.

4. Tap a folder to open it.

5. Tap an image or video to view it in full screen.

Scroll left or right to view the next or previous image or video.

Zoom In and Out

Use one of the following methods to zoom in or out on an image:

• Double-tap anywhere on the screen to zoom in or zoom out.

• Spread two fingers apart on any place to zoom in.

Pinch the screen to zoom out.

Playing Videos

1. From a Home screen, tap Apps > Gallery .

2. Tap a folder to open it.

Trimming Segments of a Video

1. Select a video, and then tap Trim .

2. Use the sliders at the bottom of the screen to trim the video. Move the start bracket to the desired starting point, move the end bracket to the desired ending point.

3. Tap Done to save the video.

Editing Images

► While viewing an image, tap More options :

• Edit : Use basic tools to edit your picture.

• More info : View image details.

• Copy to clipboard : Place a copy on the clipboard.

• Screen write: Write directly on the image.

• Rotate left : Rotate the picture counter-clockwise.

• Rotate right : Rotate the picture clockwise.

• Crop : Resize the frame to crop the image.

• Rename : Rename the file.

• Add tag: Add a tag to your image.

• Slideshow : Start a slideshow with the images and videos in the current folder.

• Studio : Edit your picture with advanced tools.

• Set as : Set the image as wallpaper or as a contact’s photo.

• Print : Print the image via a USB or Wi-Fi connection. Some printers may not be compatible with the device.

• Settings : Change the Gallery settings.

3. Tap a video to view it.

DRAFT

FOR INTERNAL USE ONLY

Applications 37 Gallery

Deleting Images

1. From a Home screen, tap Apps > Gallery .

2. Tap a folder to open it.

3. In a folder, tap More Options > Delete , select images, and then tap Done .

– or –

When viewing a single image, tap Delete .

Sharing Images

Use one of the following methods:

1. From a Home screen, tap Apps > Gallery .

2. Tap a folder to open it.

3. In a folder, tap More options > Select , select images, and then tap Share via to send them to others or share them via social network services.

– or –

When viewing a single image, tap Share to send it to others or share it via social network services.

Applications

DRAFT

FOR INTERNAL USE ONLY

38 Gallery

Internet

Access the Internet with a fully featured web browser.

Access the Internet

► From a Home screen, tap Apps > Internet .

Command Keys

The following command keys are available:

• Back or Back key to return to the previous page.

• Forward to go forward to a recent page.

• Home to display your Internet Home screen.

• Refresh to reload the current page.

Viewing Web Site

To view a web site:

► Tap the address field, enter the web address, and then tap Go .

To share, save, or print the current web page:

► Tap More options .

To zoom in or out:

► Tap the screen twice or pinch the screen to zoom out and stretch the screen to zoom in.

Applications

Browser Tabs

Use tabs to view multiple web pages at the same time.

To open a new tab:

► Tap More options > New tab .

To close a tab:

► Tap Close .

Bookmarks

To bookmark the current web page:

► Tap Bookmarks > Add .

To open a bookmarked web page:

► Tap Bookmarks and tap an entry.

History

To view a list of recently visited web pages:

► Tap Bookmarks > History tab.

Saved Pages

To save a web page:

► Tap More options > Save page .

To view a list of saved web pages:

► Tap Bookmarks > Saved pages tab.

Sharing Pages

To share a web page address with others:

DRAFT

Tap More options > Share via and follow the prompts.

FOR INTERNAL USE ONLY

39 Internet

Incognito Tabs

Pages viewed with incognito tabs do not appear within your browser history or search history, and leave no traces (such as cookies) on your device.

Incognito tabs display Incognito on their tab.

Note : Any downloaded files will remain on your device after you close the incognito tab.

To open a new incognito tab:

► Tap More options > New incognito tab .

Internet Settings

These settings allow you to modify settings associated with using the Internet app.

1. From a Home screen, tap Apps > Internet .

2. Tap More options > Settings .

3. Tap an option and follow the onscreen instructions.

Applications

DRAFT

FOR INTERNAL USE ONLY

40 Internet

Memo

Use the Memo app to write and save notes on your device.

Viewing a Memo

1. Tap Apps > Memo .

2. Tap a memo thumbnail to open it.

3. To edit the memo, tap the content of the memo.

4. To delete the memo, tap Delete .

5. To send the memo to others, tap Share via .

6. To send the memo to a Google or Samsung printer, tap Print .

Composing a Memo

1. Tap Apps > Memo .

2. Tap Create memo , type a memo, and then tap Save .

3. To change the category, tap the Category icon.

4. To insert an image into the memo, tap the

Insert icon.

5. To use your voice to insert text into the memo, tap the Voice icon.

Browsing Memos

1. Tap Apps > Memo .

2. Browse memo thumbnails by scrolling up or down.

3. To edit a memo, tap a memo thumbnail, and then tap the content of the memo.

4. To search for a memo, tap Search .

Memo Options

► While browsing memo thumbnails, tap

More options for the following options:

• Select : Select notes to share, print, or delete.

• Delete : Delete memos.

• Account : Add a Samsung account in order to sync memos across supported devices.

Applications

DRAFT

FOR INTERNAL USE ONLY

41 Memo

Messages

Learn how to send and receive di

ﬀ

erent messages using the default messaging app on your phone.

Types of Messages

Your default Messaging app provides the following message types:

• Text Messages (SMS)

• Multimedia Messages (MMS)

The Short Message Service (SMS) lets you send and receive text messages to and from other mobile phones or email addresses. To use this feature, you may need to subscribe to your service provider’s message service.

The Multimedia Messaging Service (MMS) lets you send and receive multimedia messages (such as picture, video, and audio messages) to and from other mobile phones or email addresses. To use this feature, you may need to subscribe to your service provider’s multimedia message service.

Messaging icons are displayed at the top of the screen and indicate when messages are received and their type.

Creating and Sending Messages

This section describes how to create a send a message using the Messaging app.

1. From a Home screen, tap Messages >

Compose .

2. Tap the Enter recipients field to manually enter a recipient or tap Add Recipient to select a recipient from your Contacts. You can also select the recipient based on Groups, Favorites, or

Logs.

3. If adding a recipient from your Contacts, tap the contact to place a check mark then tap Done .

The contact will be placed in the recipients field.

4. Enter additional recipients by separating each entry with a semicolon (;) and then using the previous procedure. More recipients can be added at any time before the message is sent.

For the Group option, if the number of recipients is less than 10, all members in the group will be added. You will need to delete any unnecessary members in the list by selecting the trash can icon and deleting unwanted entries.

5. Tap the Enter message field and use the onscreen keypad to enter a message.

6. Tap Add emoticons to choose an available emoticon from an onscreen list and then add it into your message (at the cursor location) if desired.

7. Review your message and tap Send .

Note : If you exit a message before you send it, the message is automatically saved as a draft.

DRAFT

FOR INTERNAL USE ONLY

42 Applications Messages

Viewing New Messages

When you receive a new message, a new message icon appears on the Status Bar.

To view the message:

1. Open the Notification Panel and select the message. For more information, please see

Notification Panel

– or –

From a Home screen, tap Messages , and then tap the new message to view it.

2. To play a multimedia message (audio or video), tap Play .

3. To scroll through the list of messages, tap the screen and scroll up or down the page.

Deleting Messages

To delete messages, follow these steps:

1. From a Home screen, tap Messages .

2. Tap More options > Delete .

3. Tap each message you want to delete or tap

Select all .

4. Tap Done .

5. At the Delete conversations prompt, tap OK to delete or Cancel to cancel.

Message Search

1. You can search through your messages by using the Message Search feature.

2. From a Home screen, tap Messages .

3. Tap Search .

4. Enter a word or phrase to search for, and then tap Search on the keyboard.

Messaging Settings

Configure the settings for text messages, multimedia messages, push messages, and so on.

► From a Home screen, tap Apps >

Messages > More options > Settings .

Emergency Alerts

This device is designed to receive wireless emergency alerts from the Commercial Mobile

Alerting System (CMAS) which may also be known as the Personal Localized Alerting Network (PLAN).

For more information, please contact your wireless provider.

Emergency Alerts allows customers to receive geographically-targeted messages. Alert messages are provided by the US Department of Homeland

Security and will alert customers of imminent threats to their safety within their area. There is no charge for receiving an Emergency Alert message.

There are three types of Emergency Alerts:

• Alerts issued by the President

• Alerts involving imminent threats to safety of life

(Extreme and Severe)

• AMBER Alerts (missing child alert)

Users may choose not to receive Imminent Threats

(Extreme and Severe) and AMBER Alerts. Alerts issued by the President cannot be disabled.

To disable Imminent Threats and AMBER Alerts, follow the instructions below:

1. From a Home screen, tap Messages .

2. Tap More options > Settings >

Emergency alerts .

3. All alerts are enabled by default (check mark showing). Tap an alert option to disable it.

Applications

DRAFT

FOR INTERNAL USE ONLY

43 Messages

Music Player

Stream the song to another device

Volume

More options

Adjust volume

Mark as favorite

Playback position

Shu

ﬄ

e songs

Elapsed playing time

View playlist

Adjust the sound quality with SoundAlive

Repeat mode for the song or

playlist

Length of song

Add to playlist

Rewind song or go to

previous song

Pause/Play

Scan forward or go

to

next song

Listen to your favorite songs with the Music player. Navigate through your music library, play songs, and create customized playlists.

Listen to Music

1. From a Home screen, tap Apps > Music.

2. Tap a library category at the top of the screen to view your music files.

3. Scroll through the list of songs and tap an entry to begin playback.

Applications

DRAFT

FOR INTERNAL USE ONLY

44 Music Player

My Files

Access files stored on your device, including images, videos, songs, and sound clips.

View Files

Files stored in the device are organized into the following groups:

• QUICK SEARCH : Files are grouped into the following categories:

• Recent files : View recently saved files.

• Images : View image files.

• Videos : View video files.

• Audio : View audio files.

• Documents : View document files.

• Downloaded apps : View downloaded apps.

• DOWNLOAD HISTORY : View all apps and files that have been downloaded to the device.

• SHORTCUTS : Contains shortcuts to files or folders that you have added. This option only appears if you have added shortcuts to the

My Files main screen.

• LOCAL STORAGE : View folders and files in their storage locations.

• Device storage : View folders and files located on the device.

• SD card : View folders and files located on the memory card (if installed).

To view files in My Files:

1. From a Home screen, tap Apps >

My Files .

2. Tap a category to view the relevant files or folders.

3. Tap a file or folder to open it.

My Files Options

On the main My Files screen, the following options are available:

• Search : Search for a file or folder.

• Tap More options for these options:

• Add shortcut : Add a shortcut on the My Files main screen to any folder.

• Storage usage : View memory information for your device and memory card (if installed).

• Settings : Change the settings for viewing files.

DRAFT

FOR INTERNAL USE ONLY

45 Applications My Files

Category Options

After tapping on a category, the following options are available:

• Home : Return to the main My Files screen.

• Search : Search for a file in the selected category.

• Tap More options to find the following options:

• Select : Select files or folders.

• Create folder : Add a folder ( Local storage only).

• View as : Change the appearance of the files or folders.

• Sort by : Change the sort order of the files.

• Add shortcut : Add a shortcut to the current location on either a Home screen or the

My Files main screen. This option only appears in Local Storage categories.

• Settings : Change the settings for viewing files.

Options for Selected Files and

Folders

• Tap More options > Select , select a file or folder, and then use one of these functions:

Share via : Send files to others or share them.

Delete : Delete files or folders.

• Tap More options for additional options:

• Move : Move files or folders to another folder.

• Copy : Copy files or folders to another folder

• Rename : Rename a file or folder. This option only appears when just one file or folder is selected.

• Add shortcut on Home screen : Add a shortcut to a file or folder to the Home screen.

• Zip : Create a zip folder containing the selected files. This option only appears in

Local Storage categories. A selected zip folder has the additional options of Extract and Extract to current folder .

• Details : View details of the selected file(s) or folder(s).

Applications

DRAFT

FOR INTERNAL USE ONLY

46 My Files

Video Player

Pop up play

AMOLED cinema Change player

Playback position

Volume

Video list

FPO

Tab S

T800

Adjust the sound quality with

SoundAlive

Rewind video or go to

previous video

Pause/Play

Scan forward or go

to

next video

Change screen ratio

Play and manage videos stored on your device.

To access video:

Use Pop-Up Play

Multi task with Pop-Up Play — transform your video player into a pop-up window. The video will continue to play, and the pop-up window can be resized or moved anywhere on the screen.

1. From a Home screen, tap Apps > Video .

2. Scroll through the videos stored on your device.

After a few seconds, each video thumbnail begins playing a preview of the clip.

2. Tap a video to view it.

3. Tap to continue playing the video in a floating window.

3. Tap a video to view it.

• Drag the window to any location on the screen.

DRAFT • Use two fingers to pinch or spread to resize the floating window.

FOR INTERNAL USE ONLY

Applications 47 Video Player

Voice Recorder

Record voice memos and notes.

Create a Voice Recording

► From a Home screen, tap Apps >

Voice Recorder .

• Tap Recording quality to adjust the recording quality.

• Tap Record to record an audio file.

• Tap Stop to stop recording. The file is automatically saved.

• Tap Pause to pause the recording of an audio file.

• Tap Cancel to cancel the recording of an audio file.

View Recordings

1. From a Home screen, tap Apps >

Voice Recorder .

2. Tap List to display a list of recordings.

• Tap Search to search through available recordings.

• Tap Delete to delete one or more voice recordings.

• Tap More options :

Select : Choose desired recordings.

Sort by : Sort the list of recordings.

Filter by category : Filter entries by category.

Settings : Configure Voice Recorder.

Applications

DRAFT

FOR INTERNAL USE ONLY

48 Voice Recorder

Settings

Configure your device’s connections and settings, add accounts, and customize the home screen, apps, and features.

DRAFT

FOR INTERNAL USE ONLY

How to Use Settings

• Some options use an ON/OFF button to turn the option on ( ON ) or o ﬀ ( OFF ).

• For some options, you must tap a field, such as

Email address , to display and set options.

• Some options are enabled or disabled by tapping a checkbox. When enabled, a check mark displays. Tap the check mark to remove it and disable the option.

Accessing Settings

► From a Home screen, tap Apps >

Settings .

– or –

From a Home screen, drag down from the Status bar to display the Notification panel, and then tap

Settings .

Settings

DRAFT

FOR INTERNAL USE ONLY

50 How to Use Settings

Wi-Fi and Wi-Fi Direct

Wi-Fi is a term used for certain types of Wireless Local Area

Networks (WLAN). Wi-Fi communication requires access to a Wireless Access Point

(WAP).

4. Tap the network you want to connect to.

• When you select an open network, you are automatically connected to the network.

Otherwise, enter a password to connect.

• To manually scan for networks, tap

More options > Scan .

Wi-Fi Direct creates a direct connection between two or more devices using Wi-Fi.

Turn Wi-Fi On or O

ﬀ

Turning Wi-Fi on makes your device able to discover and connect to compatible in-range WAPs.

1. From a Home screen, tap Apps >

Settings .

2. Tap Wi-Fi , and then tap ON/OFF to turn Wi-Fi on or o ﬀ .

Manually Connect to a

Wi-Fi

Network

1. From a Home screen, tap Apps >

Settings .

2. Tap Wi-Fi , and then tap ON/OFF to turn Wi-Fi on.

3. Tap Add Wi-Fi network .

4. Enter information about the Wi-Fi network:

• Tap Network SSID to enter the name of the

Wi-Fi network.

• Tap the Security field and select a security option and enter your password.

• Tap Show advanced options if you need to add advanced options such as Proxy settings,

IP settings, or Key management.

5. Tap Connect to store the new information and connect to your target WAP.

Scan and Connect to a Wi-Fi

Network

1. From a Home screen, tap Apps >

Settings .

2. Tap Wi-Fi , and then tap ON/OFF to turn Wi-Fi on.

3. When Wi-Fi is first turned on, your device will automatically scan for available networks and display them.

Wi-Fi Status Indicators

These Status bar icons show your current Wi-Fi connection status:

Displays when Wi-Fi is connected, active, and communicating with a Wireless Access

Point (WAP).

A Wi-Fi access point is available, but your device is not connected to it. It may also

DRAFT display if there is a communication issue with the target Wireless Access Point

(WAP).

FOR INTERNAL USE ONLY

Settings 51 Wi-Fi and Wi-Fi Direct

Wi-Fi Settings

The Wi-Fi settings menu allows you to set up many of your device’s advanced Wi-Fi services.

1. From a Home screen, tap Apps >

Settings .

2. Tap Wi-Fi , and then tap ON/OFF to turn Wi-Fi on.

3. Tap More options for options:

• Scan : Start another scan for nearby Wi-Fi networks.

• Wi-Fi Direct : Configure a Wi-Fi Direct connection with a nearby device.

• Advanced :

Network notification : Receive a notification when new Wireless Access Points (WAPs) are available.

Passpoint : Connect to passpoint-enabled

Wi-Fi Access Points automatically.

Sort by : Sort Wi-Fi networks by Alphabet or Signal strength.

Keep Wi-Fi on during sleep : Specify when to disconnect from Wi-Fi.

Always allow scanning : Allow Google location service and other apps to scan for networks, even when Wi-Fi is turned o ﬀ .

Install certificates : Install authentication certificates.

MAC address : View your device’s

MAC address, which is required when connecting to some secured networks (not configurable).

IP address : View your device’s IP address

(not configurable).

• WPS push button : Set up a connection to a

WPS (Wi-Fi Protected Setup) router or other equipment.

• WPS PIN entry : View the PIN used by your device to set up a PIN-secured connection to a Wi-Fi router or other equipment (not configurable).

Wi-Fi Direct

Wi-Fi Direct allows direct device-to-device connections via Wi-Fi, without having to connect to a

Wi-Fi network.

1. From a Home screen, tap Apps >

Settings .

2. Tap Wi-Fi , and then tap ON/OFF to turn Wi-Fi on.

Wi-Fi must be on to configure settings.

3. Tap More options > Wi-Fi Direct . Your device automatically scans for nearby Wi-Fi Direct devices, or you can tap Scan to start scanning.

4. After scanning for devices, select a device, and then follow the prompts to complete the connection.

• Tap More options > Multi connect to scan for devices that support multi connect.

Select the devices and follow the prompts to establish the connections.

• To rename your device (as seen by other devices), tap More options > Rename device .

Wi-Fi Direct Status Indicator

Displays when connected to another device using Wi-Fi Direct.

DRAFT

FOR INTERNAL USE ONLY

Settings 52 Wi-Fi and Wi-Fi Direct

Settings

Bluetooth

Bluetooth is a short-range communications technology that allows you to connect wirelessly to a number of Bluetooth devices, such as headsets and hands-free car Bluetooth systems, and Bluetooth-enabled computers, printers, and wireless devices.

Note : The Bluetooth communication range is approximately 30 feet.

Turn Bluetooth On and O

ﬀ

1. From a Home screen, tap Apps >

Settings .

2. Tap Bluetooth , and then tap ON/OFF to turn

Bluetooth on or o ﬀ .

Change Your Device’s Name

Change the name others will use when pairing with your device via Bluetooth.

1. From a Home screen, tap Apps >

Settings .

2. Tap Bluetooth > More options >

Rename device .

3. Tap Device name and edit your device name.

Making Your Device Visible to

Other Bluetooth

Devices

When you make your device visible, other Bluetooth can find it in a scan and initiate pairing. You can choose the length of time your device remains visible.

1. From a Home screen, tap Apps >

Settings .

2. Tap Bluetooth , and then tap ON/OFF to turn

Bluetooth on.

3. Tap Bluetooth > More options >

Visibility timeout .

4. Select a time period for your device to remain visible after you turn on visibility.

Scan for Bluetooth Devices

When you want to pair with another Bluetooth device, you can scan for nearby devices that are visible.

1. From a Home screen, tap Apps >

Settings .

2. Tap Bluetooth , and then tap ON/OFF to turn on

Bluetooth.

3. When Bluetooth is first turned on, it scans for nearby Bluetooth devices and displays them.

• To manually perform a new scan, tap Scan .

DRAFT

FOR INTERNAL USE ONLY

53 Bluetooth

Pair Bluetooth Devices

The Bluetooth pairing process allows you to establish trusted connections between your device and another Bluetooth device.

Pairing between two Bluetooth devices is a onetime process. Once a pairing is created, the devices will continue to recognize their partnership and exchange information without having to re-enter a passcode.

1. From a Home screen, tap Apps >

Settings .

2. Tap Bluetooth , and then tap ON/OFF to turn on

Bluetooth.

3. Make sure that the target device is discoverable, so that your device can find it. Refer to the instructions that came with the device to find out how to set it to discoverable mode.

4. Tap Scan . Your device will start to scan for

Bluetooth devices within range.

5. When you see the name of the target device displayed in the Bluetooth devices section, tap the name. Your device then automatically tries to pair with the target device. If automatic pairing fails, enter the passcode supplied with the target device.

Note : Due to di ﬀ erent specifications and features of other Bluetooth-compatible devices, display and operations may be di ﬀ erent, and functions such as transfer or exchange may not be possible with all

Bluetooth compatible devices.

Delete a Paired Device (Unpairing)

When you unpair from a Bluetooth device, the two devices will no longer recognize each other. To connect again, you’d need to pair the devices.

1. Verify your Bluetooth is active.

2. From the Bluetooth settings page, tap next to the previously paired device, and then tap

Unpair to delete the paired device.

Bluetooth Status Indicators

The Status bar displays when Bluetooth is turned on.

Disconnect a Paired Device

Disconnecting a paired device breaks the connection between the device and your device, but retains the knowledge of the pairing. At a later point when you wish to reconnect the device, there is no need to setup the connection information again.

1. From a Home screen, tap Apps >

Settings .

2. Tap Bluetooth , and then tap ON/OFF to turn on

Bluetooth.

3. Tap the previously paired device.

4. Tap OK

DRAFT

FOR INTERNAL USE ONLY

Settings 54 Bluetooth

Airplane Mode

Airplane mode disconnects your device from all networks and turns o

ﬀ

connectivity features, such as phone calls and Wi-Fi.

While in airplane mode, you can use other features, such as playing music, watching videos, and other online applications.

1. From a Home screen, tap Apps >

Settings .

2. Tap Airplane mode to enable or disable the option.

Note : You can also control Airplane mode from the Device options menu. Press and hold the

Power/Lock key , and then tap Airplane mode .

Settings

DRAFT

FOR INTERNAL USE ONLY

55 Airplane Mode

Data Usage

Monitor your mobile data usage.

Note : Your service provider may account for data usage di ﬀ erently.

1. From a Home screen, tap Apps > Settings

> Data usage for options:

• Data usage cycle : Tap the menu, and then choose a time period for data usage. Data usage for the period displays on the graph, along with usage by application below.

2. Tap More options :

• Auto sync data : Set your accounts to automatically sync.

Settings

DRAFT

FOR INTERNAL USE ONLY

56 Data Usage

More Networks

The More Networks settings allow you to configure a variety of communication settings for your device.

Edit or Delete a VPN

1. From a Home screen, tap Apps > Settings

> More networks > VPN .

2. Tap either Basic VPN or Advanced IPSec .

3. Touch and hold the VPN that you want to edit or delete.

4. Tap either Edit network or Delete network .

Default Messaging App

If you have multiple messaging apps installed, you can select which app should be your default messaging app.

1. From a Home screen, tap Apps > Settings

> More networks > Default messaging app to select a default.

Virtual Private Networks (VPN)

Set up and manage your Virtual Private Networks

(VPNs).

Note : You must set a screen lock PIN or password before setting up a VPN. For more information, see

Lock Screen

Mobile Networks

Control your device’s access to networks and mobile data service.

1. From a Home screen, tap Apps > Settings

> More networks > Mobile networks for options:

• Mobile data : Allow your device to connect to a mobile data network.

• Network mode : Choose a preferred network mode.

Adding a VPN

1. From a Home screen, tap Apps > Settings

> More networks > VPN .

2. Tap Basic VPN or Advanced IPSec VPN and follow the prompts to set up your VPN.

Connect to a VPN

1. From a Home screen, tap Apps > Settings

> More networks > VPN .

2. Tap either Basic VPN or Advanced IPSec .

3. Tap the VPN, enter your log in information, and tap Connect .

DRAFT

FOR INTERNAL USE ONLY

Settings 57 More Networks

Lock Screen

Choose a method for unlocking your screen. Di

ﬀ

erent Screen

Locks have di

ﬀ

erent levels of security and options.

Set a Screen Lock

1. From a Home screen, tap Apps >

Settings .

2. Tap Lock Screen

3. Tap Screen lock to select a screen lock and level of security:

• Swipe : Swipe the screen to unlock it. This option provides no security.

• Pattern : A screen unlock pattern is a tap gesture you create and use to unlock your device. This option provides medium security.

• PIN : Select a PIN to use for unlocking the screen. This option provides medium to high security.

• Password : Create a password for unlocking the screen. This option provides high security.

• Fingerprint : Use fingerprint recognition to unlock the screen. This option provides medium to high security.

• None : Never use a Lock screen.

Settings 58

All Screen Locks

• Dual clock : Display a dual clock on your

Lock screen when roaming.

• Clock size: Select the size of the clock that will appear on your Lock screen.

• Show date : Display the date on the

Lock screen.

• Camera shortcut : Display a camera shortcut on your Lock screen.

• Owner Information : Show owner information on the Lock screen.

• Additional information : Display Weather information or the step count when Pedometer in S Health is turned on.

• Help text : Show help information on unlocking the screen on the Lock screen.

Screen Lock Options

Swipe Only

• Unlock e ﬀ ect : Set the visual e ﬀ ect used when unlocking the screen.

Pattern Only

• Pattern type : Select a pattern type.

• Make pattern visible your draw it.

DRAFT

FOR INTERNAL USE ONLY

Lock Screen

Themes

(Feature crashes every time access is attempted on current software NI3.)

Settings

DRAFT

FOR INTERNAL USE ONLY

59 Themes

Sound Settings

Configure the sounds and vibrations used to indicate notifications, screen touches, and other activities.

Change the Notification Sound

Choose a sound for notifications, such as for new messages and event reminders.

Adjust the Volume

Set the system volume level, and set default volume for call ringtones, notifications, and other audio.

1. From a Home screen, tap Apps >

Settings .

2. Tap Sound > Notifications .

3. Tap a sound to preview it, and then tap Done to set it as your default notification sound.

Tip : You can also set System volume from the home screen by pressing the Volume key.

1. From a Home screen, tap Apps >

Settings .

2. Tap Sound > Volume , and then drag the sliders to set the default volume for:

• Ringtone

• Music, video, games, and other media

• Notifications

• System

Vibrate When Ringing

Your device can vibrate in addition to ringing when you receive a call.

1. From a Home screen, tap Apps >

Settings .

2. Tap Sound > Vibrate when ringing to turn the feature on.

Play Tones When Entering a

Phone Number

Play tone when the dialing keypad is tapped.

Select a Default Ringtone

Choose from preset ringtones or add your own.

1. From a Home screen, tap Apps >

Settings .

2. Tap Sound > Ringtones .

3. Tap a ringtone to hear a preview, and then tap

Done to set it as your default ringtone.

– or –

Tap Add to use an audio file as a ringtone.

1. From a Home screen, tap Apps >

Settings .

2. Tap Sound > Dialing keypad tone to turn the feature on.

Play Tones When Touching or

Tapping the

Screen

Play tones when you touch or tap the screen to make selections.

1. From a Home screen, tap Apps >

DRAFT Settings .

FOR INTERNAL USE ONLY

Settings 60 Sound Settings

2. Tap Sound > Touch sounds to turn the feature on.

Set the Screen Lock Sound

Play a sound when you unlock the screen.

1. From a Home screen, tap Apps >

Settings .

2. Tap Sound > Screen lock sound to turn the feature on.

Select an Emergency Tone

Set an alert tone or vibration when receiving an emergency message.

1. From a Home screen, tap Apps >

Settings .

2. Tap Sound > Emergency tone and select O ﬀ ,

Alert, or Vibrate.

Settings

DRAFT

FOR INTERNAL USE ONLY

61 Sound Settings

Display Settings

Change Wallpaper

Change the look of the home and lock screens with wallpaper. You can display a favorite picture or choose from preloaded wallpapers.

1. From a Home screen, tap Apps > Settings

> Display .

2. Tap Wallpaper .

3. Tap Home screen , Lock screen , or Home and lock screens .

4. Tap a image to preview it, and then tap

Set wallpaper .

• Tap More images for additional wallpapers.

Notification Panel

Customize which Quick setting buttons appear on the Notification Panel.

You can also customize which apps appear on the Recommended applications menu on the

Notification panel when you perform certain actions, such as plugging in earphones.

► From a Home screen, tap Apps > Settings

> Display > Notification panel .

– or –

From the Notification panel, tap View all >

Edit .

The following options are available:

• Application notifications : Configure notifications for each app on your device.

• Brightness adjustment : Adjust the screen brightness and volume from the

Notification Panel.

Settings

• Set the quick setting buttons : Customize the quick setting buttons that appear at the top of the Notification Panel as follows:

Tap and drag buttons to reorder them.

Tap Reset to reset the order of the buttons.

Adjust the Screen Brightness

Adjust the screen brightness to suit your surroundings or personal preference. You may also want to adjust screen brightness to conserve battery power.

1. From a Home screen, tap Apps > Settings

> Display .

2. Tap Brightness and drag the slider to adjust the brightness level.

Note : You can also control Brightness from the

Notification panel. Drag down the Status Bar at the top of the screen to find the Brightness slider.

Automatically Rotate the Screen

Use the front camera to rotate the screen based on the orientation of your face.

1. From a Home screen, tap Apps > Settings

> Display .

2. Tap Auto rotate screen to turn the feature on.

DRAFT

FOR INTERNAL USE ONLY

62 Display Settings

Set the Screen Timeout Delay

Choose how long the display screen remains lit after you tap the screen or press any key.

1. From a Home screen, tap Apps > Settings

> Display .

2. Tap Screen timeout , and then choose a time period.

Daydream (Screen Saver)

The Daydream setting controls what the screen displays when the device is docked (dock not included), or while charging. You can choose to display colors, or display photos stored on your device.

1. From a Home screen, tap Apps >

Settings > Display .

2. Tap Daydream . Tap ON/OFF to turn Daydream on. Configure options:

• Colors : Tap the selector to display a changing screen of colors.

• Desk home screen : Select items to display while the device is docked.

• Flipboard : Display pictures from Flipboard.

Tap Settings for options.

• Google Photos : Display pictures from your

Google Photos account. Tap Settings for options.

• Photo frame : Display pictures in a photo frame. Tap Settings for options.

• Photo table : Display pictures in a photo table.

Tap Settings for options.

3. Tap Preview to see a demonstration of

Daydream.

4. Tap Select when to daydream and tap While docked , While charging , or Both .

Change the Font Style and Size

You can set the font style and size for all text that displays on the screen.

1. From a Home screen, tap Apps > Settings

> Display .

2. Tap Font style to choose a font.

• Tap Download to find new fonts from the

Google Play Store.

3. Tap Font size to adjust the size of the font.

Settings

DRAFT

FOR INTERNAL USE ONLY

63 Display Settings

Settings

Call Settings

Configure the various settings used to make and receive calls.

To access Call settings:

► From a Home screen, tap Apps > Settings

> Call .

– or –

From a Home screen, tap Phone , and then tap More options > Settings > Call .

Set Reject Messages

1. From a Home screen, tap Apps > Settings

> Call > Set up call rejection messages .

2. Tap Create to manually add a reject message.

– or –

Tap one of the pre-written messages to be displayed when you want the call to be rejected.

You can edit the message if desired.

3. Tap Save to save the reject message.

Answering and Ending Calls

1. From a Home screen, tap Apps > Settings

> Call > Answering/ending calls .

2. The following options display:

• The home key answers calls : Press the

Home key to answer the phone.

• The power key ends calls : Press the power key to end the current call.

Ringtones and Keypad Tones

1. From a Home screen, tap Apps > Settings

> Call > Ringtones and keypad tones .

2. Tap Ringtones , select a ringtone, and tap OK .

• Tap Add to locate an audio file to create as a ringtone.

3. Tap Vibrate when ringing to create a check mark if you want your phone to vibrate when a call is incoming.

4. Tap Dialing keypad tone to create a check mark if you want tones to play when the keypad is pressed.

Noise Reduction

This option allows you to suppress background noise during a call.

1. From a Home screen, tap Apps > Settings

> My device tab > Call .

2. Tap Noise reduction to create a check mark and enable the feature.

Voicemail

You can view your voicemail number from this menu.

1. From a Home screen, tap Apps > Settings

> Call > Voicemail service .

2. If an additional voicemail service is in use (other than carrier), tap Voice settings to view your selected voicemail number and information.

DRAFT

FOR INTERNAL USE ONLY

64 Call Settings

TTY Mode

A TTY (also known as a TDD or Text Telephone) is a telecommunications device that allows people who are deaf, hard of hearing, or who have speech or language disabilities, to communicate by telephone.

Your device is compatible with select TTY devices.

Please check with the manufacturer of your TTY device to ensure that it is compatible with digital cell phones.

Your phone and TTY device will connect via a special cable that plugs into your phone’s headset jack. If this cable was not provided with your TTY device, contact your TTY device manufacturer to purchase the connector cable.

1. From a Home screen, tap Apps > Settings

> Call > TTY mode .

2. Tap TTY Full , TTY HCO , or TTY VCO to activate the feature, or TTY O ﬀ to deactivate the feature.

O ﬀ is the default setting.

DTMF Tones

You can modify the dial tones for dual-tone multifrequency (DTMF) signaling. DTMF tones are used as input by some automated phone systems for making selections.

1. From a Home screen, tap Apps > Settings

> Call > DTMF tones .

2. Tap either Normal or Long .

Voice Privacy Mode

If supported by your carrier, you can activate

Enhanced privacy mode to encrypt voice signals.

1. From a Home screen, tap Apps > Settings

> Call .

2. Tap Voice privacy to either enable or disable this feature.

Settings

DRAFT

FOR INTERNAL USE ONLY

65 Call Settings

Storage

View the device memory and usage, or mount, unmount, or format an optional memory card

(not included).

Device Memory

View and manage the memory used by the device.

► From a Home screen, tap Apps > Settings

> Storage .

• The DEVICE MEMORY displays Total space and Available space.

• The amounts of memory used by Applications,

Pictures and videos, Audio, Downloads,

Cached data, and Miscellaneous files are also displayed.

To increase available memory:

1. Tap Cached data to clear all cached data for all apps.

2. Tap Miscellaneous files , select unnecessary files (or tap Select all ), and then tap Delete .

Memory Card (SD Card)

Once an optional memory card (not included) has been installed in your device, the card memory displays as Total space and Available space.

Install a Memory Card

You can use an optional microSD or microSDHC card (not included) to add additional memory space to your device.

1. Remove the back cover. For more information,

see Remove the Back Cover .

2. With the gold contacts facing down, carefully slide the memory card into the slot, pushing gently until it clicks into place.

3. Replace the back cover. For more information,

see Replace the Back Cover

Settings

DRAFT

FOR INTERNAL USE ONLY

66 Storage

Mount a Memory Card

When you install an optional memory card, it is automatically mounted (connected to the device) and prepared for use. However, should you unmount the card without removing it from the device, you will need to mount it before it can be accessed.

1. From a Home screen, tap Apps > Settings

> Storage .

2. Tap Mount SD card .

Unmount an SD Card

To prevent damage to information stored on the memory card, always unmount the card before removing it from the device.

Unmounting an SD card may stop some applications from functioning until you mount the SD card again.

1. From a Home screen, tap Apps > Settings

> Storage .

2. Tap Unmount SD card .

Remove a Memory Card

Warning! To prevent damage to information stored on the memory card, unmount the card before removing it from the device.

1. From a Home screen, tap Apps >

Settings v> Storage.

2. Tap Unmount SD card .

3. Remove the back cover. For more information,

see Replace the Back Cover

4. Gently press inward on the memory card so that it pops out from the slot and carefully pull the card out.

5. Replace the back cover. For more information,

see Remove the Back Cover .

Formatting an SD Card

Warning! When formatting an SD card, you should backup your music and photo files that are stored on the card because formatting the SD card deletes all the stored data.

1. From a Home screen, tap Apps > Settings

> Storage .

2. Tap > Format SD card and follow the prompts.

Settings

DRAFT

FOR INTERNAL USE ONLY

67 Storage

Battery

View how battery power is used for device activities.

1. From a Home screen, tap Apps >

Settings .

2. Tap Battery for options:

• Show battery percentage : Display the battery charge percentage next to the battery icon on the Status bar.

• Battery Chart : The battery level displays as a percentage. The amount of time the battery has been used also displays.

• Apps and OS Usage : Battery usage displays in percentages per application.

Tap Screen , Android System , Android OS , or an app to view they are a ﬀ ecting battery use.

• Tap Refresh to update the listing.

Note : Other applications may be running that a ﬀ ect battery use.

Settings

DRAFT

FOR INTERNAL USE ONLY

68 Battery

Ultra Power Saving Mode

Conserve battery power by automatically adjusting the screen brightness, limiting the performance of the CPU, and other power reduction activities.

Ultra power saving mode saves battery power by using a gray scale theme on the Home screen and limiting the number of usable apps.

1. From a Home screen, tap Apps >

Settings .

2. Tap Ultra power saving for options:

3. Tap ON/OFF to turn the feature on.

4. Read the information on the page that appears and tap Turn on to activate Ultra power saving mode.

5. Tap the Add icons to add more apps to the

Home screen.

6. To turn o ﬀ Ultra power saving mode, tap

More options > Turn o ﬀ Ultra power saving mode .

Settings

DRAFT

FOR INTERNAL USE ONLY

69 Ultra Power Saving Mode

Application Manager

You can download and install new applications on your device.

Use Application manager settings to manage your downloaded and preloaded applications.

Warning: Because this device can be configured with system software not provided by or supported by Google or any other company, end-users operate these devices at their own risk.

Memory Usage

See how memory is being used by Downloaded or

Running applications.

1. From a Home screen, tap Apps > Settings

> Application manager .

2. Swipe across the screen to display

DOWNLOADED, SD CARD, RUNNING, or ALL to display memory usage for that category of applications.

The graph on the DOWNLOADED tab shows used and free device memory. The graph on the

RUNNING tab shows used and free RAM.

Settings

Downloaded

Displays apps you have downloaded onto your device.

1. From a Home screen, tap Apps > Settings

> Application manager .

2. Tap DOWNLOADED to view a list of all the downloaded applications on your device.

• To switch the order of the DOWNLOADED list, tap More options > Sort by size or

Sort by name .

• To reset all of your application preferences, tap More options > Reset app preferences .

• Tap an application to view and update information about the application, including memory usage, default settings, and permissions. The following options are displayed:

Force stop : Stop an app that is misbehaving. Restart your device if stopping an app, process, or service causes your device to stop working correctly.

Uninstall : Delete the application from the device.

Move to SD card : Move this app to your microSD card.

Clear data : Clear application data from memory.

Clear cache : Clear an application’s temporary memory storage.

Clear defaults : Clear an application’s customization.

Permissions : View information about the application’s access to your device and data.

DRAFT

FOR INTERNAL USE ONLY

70 Application Manager

SD Card

Displays apps you have downloaded onto your memory card (not included).

1. From a Home screen, tap Apps > Settings

> Application manager .

2. Tap SD CARD to view a list of all the downloaded applications on your SD card.

• To switch the order of the SD CARD list, tap More options > Sort by size or

Sort by name .

• To reset your application preferences, tap

More options > Reset app preferences .

Note : When you reset app preferences, you will not lose any app data.

3. Tap an application to view and update information about the application, including memory usage, default settings, and permissions.

Running Services

View and control services running on your device.

1. From a Home screen, tap Apps > Settings

> Application manager .

2. Tap RUNNING to view a list of running services.

All the applications that are currently running on the device display.

3. Tap Show cached processes to display all the cached processes that are running. Tap Show services in use to switch back.

4. Tap one of the applications to view application information.

• Stop : Stops the application from running on the device. This is usually done prior to uninstalling the application. (Not all services can be stopped. Stopping services may have undesirable consequences on the application or Android System.)

• Report : Report failure and other application information.

Note : Options vary by application.

DRAFT

FOR INTERNAL USE ONLY

Settings 71 Application Manager

Location Services

Some apps, such as Google maps, may require one or more location services be turned on for full functionality.

Locating Method

1. From a Home screen, tap Apps > Settings

> Location .

2. Tap ON/OFF to turn on Location services.

3. Tap Mode to select how your location is determined:

• High accuracy : Use GPS, Wi-Fi, and mobile networks.

• Power saving : Use Wi-Fi and mobile networks

(no GPS).

• GPS only : Use GPS only.

Recent Location Requests

Apps that have requested your location are listed under Recent location requests.

1. From a Home screen, tap Apps > Settings

> Location .

2. Tap ON/OFF to turn on Location services.

3. Tap an entry to view the app’s settings.

Location Reporting

Google uses Location Reporting to store and use your device’s most recent location data. Google apps, such as Google Maps, can use this data to improve your search results based on places that you have visited.

1. From a Home screen, tap Apps > Settings

> Location .

2. Tap ON/OFF to turn on Location services.

3. Tap Google Location Reporting for options:

• Location Reporting : Allow Google apps to use your device’s most recent location data.

• Location History : Allow Google to store a history of your location data. Tap DELETE

LOCATION HISTORY to permanently delete your location history.

Settings

DRAFT

FOR INTERNAL USE ONLY

72 Location Services

Security

Secure your device and protect your data with Security settings.

Device Administration

Manage your device administrators and application installation privileges.

1. From a Home screen, tap Apps >

Settings .

2. Tap Security for options:

• Device administrators : Add or remove device administrators.

• Unknown sources : Enable installation of non-Google Play applications.

• Verify apps : Block or warn before installing apps that may cause harm.

Warning! Enabling installation of third-party applications can cause your device and personal data to be more vulnerable to attacks by unknown sources.

Encrypt Your Data

Require a numeric PIN or password to decrypt your device each time you power it on or encrypt the data on a memory card (not included) each time it is connected.

1. From a Home screen, tap Apps >

Settings .

2. Tap Security for options:

• Tap Encrypt device and follow the prompts to encrypt all data on your device.

• Tap Encrypt external SD card to encrypt data on a memory card (not included).

View Passwords

Display password characters briefly as you type them.

1. From a Home screen, tap Apps >

Settings .

2. Tap Security > Make passwords visible to turn the feature on.

Credential Storage

Manage your security certificates. If a certificate authority (CA) certificate gets compromised or for some other reason you do not trust it, you can disable or remove it.

1. From a Home screen, tap Apps >

Settings .

2. Tap Security for options:

• Storage type : Select a storage location for credential contents.

• Trusted credentials : Display certificates in your device’s ROM and other certificates you have installed.

• Install from device storage : Install a new certificate from storage.

• Clear credentials : Erase the credential contents from the device and reset the password.

DRAFT

FOR INTERNAL USE ONLY

Settings 73 Security

Language and Input Settings

Configure your device’s language and input settings.

Set Your Default Language

1. From a Home screen, tap Apps >

Settings .

2. Tap Language and input > Language .

3. Select a language from the list.

automatically. Predictive text can learn your personal writing style from your contacts, messages, Gmail, and social networking sites — improving its accuracy of predicting your text entries.

• Additional keyboard settings provide assistance with capitalization, punctuation, and much more.

Google Voice Typing Settings

Speak rather than type your text entries using

Google Voice Typing.

Select Your Default Keyboard or

Input Method

1. From a Home screen, tap Apps >

Settings .

2. Tap Language and input > Default .

3. Select a keyboard.

Note : Additional keyboards can be downloaded from the Google Play Store.

Samsung Keyboard Settings

Configure options for using the Samsung keyboard.

1. From a Home screen, tap Apps >

Settings .

2. Tap Language and input .

3. Tap Settings next to Google voice typing for options:

• Choose input languages : Select languages for Google voice typing.

• Block o ff ensive words : Hide words many people find o ff ensive are in results of Google voice searches. O ff ensive words are replaced in results with a placeholder (####).

• O ﬄ ine speech recognition : Download and install speech recognition engines, allowing you to use voice input while not connected to the network.

1. From a Home screen, tap Apps >

Settings .

2. Tap Language and input .

3. Tap Settings next to Samsung keyboard for options:

• Select input languages : Choose which languages are available on the keyboard. To switch between languages, slide the space bar sideways.

• Predictive text DRAFT and, optionally, complete common words

FOR INTERNAL USE ONLY

Settings 74 Language and Input Settings

Voice Search

Use Google voice recognition to perform Google searches using spoken commands.

To perform a voice search, tap in the Google search bar or widget. Or say “Ok Google” to launch a Google search (if the hotword detection option is enabled).

1. From a Home screen, tap Apps >

Settings .

2. Tap Language and input > Voice search for options.

• Tap “Ok Google” hotword detection to launch a Google search whenever you say

“Ok Google.”

• Additional options include selecting a default language, blocking o ﬀ ensive words, and more.

Text-To-Speech Options

Configure your Text-To-Speech (TTS) options. TTS is used for various accessibility features, such as

TalkBack. For more information, see Accessibility

1. From a Home screen, tap Apps >

Settings .

2. Tap Language and input > Text-to-speech for options:

• Choose either the Samsung or Goggle text-tospeech engine. Tap Settings next to each

TTS engine for options.

• Speech rate : Set the speed at which the text is spoken.

• Listen to an example : Play a sample of speech synthesis (available if voice data is installed).

• Default language status : Display the default language in use.

Mouse/Trackpad Settings

Configure settings for using an optional mouse or trackpad (not included).

1. From a Home screen, tap Apps > Settings

> Language and input .

2. Tap Pointer speed to set the speed of the pointer.

Settings

DRAFT

FOR INTERNAL USE ONLY

75 Language and Input Settings

Backup and Reset

Back up your data to Google servers. You can also reset your device to its factory defaults.

Backup and Restore

Enable backup of your information to Google servers.

1. From a Home screen, tap Apps >

Settings .

2. Tap Backup and reset for options:

• Back up my data : Enable back up of application data, Wi-Fi passwords, and other settings to Google servers.

• Backup account : Select a Google account to be used as your backup account.

• Automatic restore : Enable automatic restoration of settings from Google servers.

When enabled, backed-up settings are restored when you reinstall an application.

Factory Data Reset

Return your device to its factory defaults.

Warning! This action permanently erases ALL data from the device, including Google or other account settings, system and application data and settings, downloaded applications, as well as your music, photos, videos, and other files.

1. From a Home screen, tap Apps >

Settings .

2. Tap Backup and reset > Factory data reset .

3. Tap Reset device and follow the prompts to perform the reset.

DRAFT

FOR INTERNAL USE ONLY

Settings 76 Backup and Reset

Settings

Accounts

Set up and manage accounts, including your Google Account,

Samsung account, email, and social networking accounts.

Depending on the account, you can choose to synchronize your calendar, contacts, and other types of content.

Add an Account

1. From a Home screen, tap Apps >

Settings > Add account .

2. Tap one of the account types.

3. Follow the prompts to enter your credentials and set up the account.

Synchronize Accounts

1. From a Home screen, tap Apps > Settings

> ( account type ).

2. Tap an account to view the sync settings for that account.

• Check individual data items to sync.

• Tap Sync to synchronize the account.

Account Settings

Each account has its own set of settings. In addition, you can configure common settings for all accounts of the same type.

Note : Account settings and available features vary between account types and service providers. Contact your service provider for more information on your account’s settings.

1. From a Home screen, tap Apps > Settings

> ( account type ).

• Tap an account to configure that account’s settings.

• Tap Settings or other available options to configure common settings for all accounts of this type.

Delete an Account

1. From a Home screen, tap Apps > Settings

> ( account type ).

2. Tap the account, and then tap More options >

Remove account .

DRAFT

FOR INTERNAL USE ONLY

77 Accounts

Date and Time Settings

By default, your device receives date and time information from the wireless network.

When you are outside network coverage, you may want to set date and time information manually using the date and time settings.

► From a Home screen, tap Apps > Settings

> Date and time .

• Automatic date and time : Tap the check box to use the time on the mobile and/or Wi-Fi network. If this option is checked, you cannot manually set the date and time.

• Set date : Tap to manually set the date. This option is locked if Automatic date and time is enabled.

• Set time : Tap to manually set the time. This option is locked if Automatic date and time is enabled.

• Automatic time zone : Tap the check box to use the time zone detected on the mobile and/ or Wi-Fi network. If this option is checked, you cannot manually set the time zone.

• Select time zone : Tap to manually set the time zone. This option is locked if Automatic time zone is enabled.

• Use 24-hour format : Tap to use 24-hour format (as opposed to 12-hour with AM and

PM).

• Select date format : Tap to choose your preferred date format.

Settings

DRAFT

FOR INTERNAL USE ONLY

78 Date and Time Settings

Accessibility

Accessibility services are special features that make using the device easier for those with certain physical disabilities.

• Accessibility shortcut : Quickly enable accessibility features in two quick steps. Tap

ON/OFF to turn the feature on.

• Text-to-speech options : Set your preferred

TTS engine and options. For more information,

see Text-To-Speech Options .

Note : You can download additional accessibility applications from the Google Play Store.

1. From a Home screen, tap Apps >

Settings .

2. Tap Accessibility for options:

• Direct access : Press the Home key three times to open the accessibility options screen.

• Answering/ending calls : Select the methods you can use to answer and end a call.

• Single tap mode : Tap to stop or snooze alarms, calendar events, and timer alerts, and accept or reject incoming calls.

Hearing

• Flash notification : Set your camera light to blink whenever you receive a notification.

• Turn o ﬀ all sounds : For privacy, turn o ﬀ all notifications and audio.

• Google subtitles (CC) : Use Google subtitles with multimedia files when available. Tap

Google subtitles (CC) for options.

• Mono audio : Switch audio from stereo to mono for use with one earphone.

• Sound balance : Use the slider to set the Left and Right balance when using a stereo device.

Services

Additional accessibility apps may be downloaded from the Google Play Store. Certain accessibility services you install may be configured here.

Vision

• TalkBack : Speak feedback aloud to help blind and low-vision users.

TalkBack can collect all of the text you enter, except passwords, including personal data and credit card numbers. It may also log your user interface interactions with the device.

• Speak passwords : Read the characters aloud as you enter your passwords.

Dexterity and Interaction

• Press and hold delay : Select a time interval for this tap gesture.

• Font size : Set the font size.

• Magnification gestures : Use exaggerated gestures such as triple-tapping, double pinching, and dragging two fingers across the screen.

DRAFT

FOR INTERNAL USE ONLY

Settings 79 Accessibility

Printing

Print images and documents to Samsung printers and other compatible printers

(not

included).

1. From a Home screen, tap Apps > Settings

> Printing .

2. Tap Add printer and follow the prompts to install a printer or printer plug-in.

Settings

DRAFT

FOR INTERNAL USE ONLY

80 Printing

Settings

About Your Device

View information about your device, including status, legal information, hardware and software versions, and a tutorial.

1. From a Home screen, tap Apps >

Settings .

2. Tap About device , and then tap items for more details:

• Software update : Check for and install available software updates.

• Status : View the status of the battery, network, and other information about your device.

• Legal information : View your device’s open source licenses and Google legal information.

• Device name : View and change your device’s name.

• Additional device information includes the

Model number, Android version, Build number, and more.

Software Update

Use Software update to update your device’s software.

1. From a Home screen, tap Apps >

Settings .

2. Tap About device > Software update .

3. Follow the prompts to check for available software updates to download and install.

DRAFT

FOR INTERNAL USE ONLY

81 About Your Device

Health and safety information

Exposure to Radio Frequency (RF) Signals

Certification Information (SAR)

Your wireless phone is a radio transmitter and receiver. It is designed and manufactured not to exceed the exposure limits for radio frequency (RF) energy set by the Federal Communications Commission (FCC) of the U.S. government. These

FCC exposure limits are derived from the recommendations of two expert organizations, the National Counsel on Radiation Protection and Measurement

(NCRP) and the Institute of Electrical and Electronics Engineers (IEEE). In both cases, the recommendations were developed by scientific and engineering experts drawn from industry, government, and academia after extensive reviews of the scientific literature related to the biological effects of RF energy.

The exposure limit set by the FCC for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate (SAR). The SAR is a measure of the rate of absorption of RF energy by the human body expressed in units of watts per kilogram (W/kg). The FCC requires wireless phones to comply with a safety limit of 1.6 watts per kilogram (1.6 W/ kg). The FCC exposure limit incorporates a substantial margin of safety to give additional protection to the public and to account for any variations in measurements.

SAR tests are conducted using standard operating positions accepted by the FCC with the phone transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value.

This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output.

Before a new model phone is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the exposure limit established by the

FCC. Tests for each model phone are performed in positions and locations (e.g. at the ear and worn on the body) as required by the FCC.

For body worn operation, this model phone has been tested and meets the FCC RF exposure guidelines when used with a Samsung accessory designated for this product or when used with an accessory that contains no metal and that positions the handset a minimum of 1.5 cm from the body.

Non-compliance with the above restrictions may result in violation of FCC RF exposure guidelines.

SAR information on this and other model phones can be viewed on-line at http://www.fcc.gov/oet/ea/fccid/ . Please use the phone FCC ID number for search,

A3LSMG360V.

Sometimes it may be necessary to remove the battery pack to find the number. Once you have the FCC ID number for a particular phone, follow the instructions on the website and it should provide values for typical or maximum SAR for a particular phone. Additional product specific SAR information can also be obtained at http://www.fcc.gov/encyclopedia/specific-absorption-rate-sar-cellular-telephones

Consumer Information on Wireless Phones

The U.S. Food and Drug Administration (FDA) has published a series of Questions and Answers for consumers relating to radio frequency (RF) exposure from wireless phones. The FDA publication includes the following information:

What kinds of phones are the subject of this update?

The term wireless phone refers here to hand-held wireless phones with built-in antennas, often called “cell,” “mobile,” or “PCS” phones. These types of wireless phones can expose the user to measurable radio frequency energy (RF) because of the short distance between the phone and the user's head. These RF exposures are limited by Federal Communications Commission safety guidelines that were developed with the advice of FDA and other federal health and safety agencies.

When the phone is located at greater distances from the user, the exposure to RF is drastically lower because a person's RF exposure decreases rapidly with increasing distance from the source. The socalled “cordless phones,” which have a base unit connected to the telephone wiring in a house, typically operate at far lower power levels, and thus produce RF exposures well within the FCC's compliance limits.

Do wireless phones pose a health hazard?

The available scientific evidence does not show that any health problems are associated with using wireless phones. There is no proof, however, that wireless phones are absolutely safe. Wireless phones emit low levels of radio frequency energy (RF) in the microwave range while being used. They also emit very low levels of RF when in the stand-by mode. Whereas high levels of RF can produce health effects (by heating tissue), exposure to low level RF that does not produce heating effects causes no known adverse health effects. Many studies of low level RF exposures have not found any biological effects. Some studies have suggested that some biological effects may occur, but such findings have not been confirmed by additional research. In some cases, other researchers have had difficulty in reproducing those studies, or in determining the reasons for inconsistent results.

What is FDA's role concerning the safety of wireless phones?

Under the law, FDA does not review the safety of radiation-emitting consumer products such as wireless phones before they can be sold, as it does with new drugs or medical devices. However, the agency has authority to take action if wireless phones are shown to emit radio frequency energy (RF) at a level that is hazardous to the user. In such a case, FDA could require the manufacturers of wireless phones to notify users of the health hazard and to repair, replace or recall the phones so that the hazard no longer exists.

Although the existing scientific data do not justify FDA regulatory actions, FDA has urged the wireless phone industry to take a number of steps, including the following:

“Support needed research into possible biological effects of RF of the type emitted by wireless phones;

“Design wireless phones in a way that minimizes any RF exposure to the user that is not necessary for device function; and

“Cooperate in providing users of wireless phones with the best possible information on possible effects of wireless phone use on human health.

FDA belongs to an interagency working group of the federal agencies that have responsibility for different aspects of RF safety to ensure coordinated efforts at the federal level. The following agencies belong to this working group:

“National Institute for Occupational Safety and Health

“Environmental Protection Agency

“Federal Communications Commission

“Occupational Safety and Health Admin istration

“National Telecommunications and Information Administration

The National Institutes of Health participates in some interagency working group activities, as well.

FDA shares regulatory responsibilities for wireless phones with the Federal

Communications Commission (FCC). All phones that are sold in the United States must comply with FCC safety guidelines that limit RF exposure. FCC relies on FDA and other health agencies for safety questions about wireless phones.

FCC also regulates the base stations that the wireless phone networks rely upon.

While these base stations operate at higher power than do the wireless phones themselves, the RF exposures that people get from these base stations are typically thousands of times lower than those they can get from wireless phones. Base stations are thus not the primary subject of the safety questions discussed in this document.

What are the results of the research done already?

The research done thus far has produced conflicting results, and many studies have suffered from flaws in their research methods. Animal experiments investigating the effects of radio frequency energy (RF) exposures characteristic of wireless phones have yielded conflicting results that often cannot be repeated in other laboratories. A few animal studies, however, have suggested that low levels of RF could accelerate the development of cancer in laboratory animals. However, many of the studies that showed increased tumor development used animals that had been genetically engineered or treated with cancer-causing chemicals so as to be pre-disposed to develop cancer in absence of RF exposure. Other studies exposed the animals to

RF for up to 22 hours per day. These conditions are not similar to the conditions under which people use wireless phones, so we don't know with certainty what the results of such studies mean for human health.

Three large epidemiology studies have been published since December 2000.

Between them, the studies investigated any possible association between the use of wireless phones and primary brain cancer, glioma, meningioma, or acoustic neuroma, tumors of the brain or salivary gland, leukemia, or other cancers. None of the studies demonstrated the existence of any harmful health effects from wireless phones RF exposures. However, none of the studies can answer questions about long-term exposures, since the average period of phone use in these studies was around three years.

What research is needed to decide whether RF exposure from wireless phones poses a health risk?

A combination of laboratory studies and epidemiological studies of people actually using wireless phones would provide some of the data that are needed. Lifetime animal exposure studies could be completed in a few years. However, very large numbers of animals would be needed to provide reliable proof of a cancer promoting effect if one exists. Epidemiological studies can provide data that is directly applicable to human populations, but ten or more years' follow-up may be needed to provide answers about some health effects, such as cancer. This is because the interval between the time of exposure to a cancer-causing agent and the time tumors develop - if they do - may be many, many years. The interpretation of

epidemiological studies is hampered by difficulties in measuring actual RF exposure during day-to-day use of wireless phones. Many factors affect this measurement, such as the angle at which the phone is held, or which model of phone is used.

What is FDA doing to find out more about the possible health effects of wireless phone RF?

FDA is working with the U.S. National Toxicology Program and with groups of investigators around the world to ensure that high priority animal studies are conducted to address important questions about the effects of exposure to radio frequency energy (RF).

FDA has been a leading participant in the World Health Organization international

Electromagnetic Fields (EMF) Project since its inception in 1996. An influential result of this work has been the development of a detailed agenda of research needs that has driven the establishment of new research programs around the world. The

Project has also helped develop a series of public information documents on EMF issues.

FDA and Cellular Telecommunications & Internet Association (CTIA) have a formal

Cooperative Research and Development Agreement (CRADA) to do research on wireless phone safety. FDA provides the scientific oversight, obtaining input from experts in government, industry, and academic organizations. CTIA-funded research is conducted through contracts to independent investigators. The initial research will include both laboratory studies and studies of wireless phone users. The CRADA will also include a broad assessment of additional research needs in the context of the latest research developments around the world.

What steps can I take to reduce my exposure to radio frequency energy from my wireless phone?

If there is a risk from these products - and at this point we do not know that there is - it is probably very small. But if you are concerned about avoiding even potential risks, you can take a few simple steps to minimize your exposure to radio frequency energy (RF). Since time is a key factor in how much exposure a person receives, reducing the amount of time spent using a wireless phone will reduce RF exposure.

“If you must conduct extended conversations by wireless phone every day, you could place more distance between your body and the source of the RF, since the exposure level drops off dramatically with distance. For example, you could use a headset and carry the wireless phone away from your body.

Again, the scientific data do not demonstrate that wireless phones are harmful. But if you are concerned about the RF exposure from these products, you can use measures like those described above to reduce your RF exposure from wireless phone use.

What about children using wireless phones?

The scientific evidence does not show a danger to users of wireless phones, including children and teenagers. If you want to take steps to lower exposure to radio frequency energy (RF), the measures described above would apply to children and teenagers using wireless phones. Reducing the time of wireless phone use and increasing the distance between the user and the RF source will reduce RF exposure.

Some groups sponsored by other national governments have advised that children be discouraged from using wireless phones at all. For example, the government in

the United Kingdom distributed leaflets containing such a recommendation in

December 2000. They noted that no evidence exists that using a wireless phone causes brain tumors or other ill effects. Their recommendation to limit wireless phone use by children was strictly precautionary; it was not based on scientific evidence that any health hazard exists.

Do hands-free kits for wireless phones reduce risks from exposure to RF emissions?

Since there are no known risks from exposure to RF emissions from wireless phones, there is no reason to believe that hands-free kits reduce risks. Hands-free kits can be used with wireless phones for convenience and comfort. These systems reduce the absorption of RF energy in the head because the phone, which is the source of the

RF emissions, will not be placed against the head. On the other hand, if the phone is mounted against the waist or other part of the body during use, then that part of the body will absorb more RF energy. Wireless phones marketed in the U.S. are required to meet safety requirements regardless of whether they are used against the head or against the body. Either configuration should result in compliance with the safety limit.

Do wireless phone accessories that claim to shield the head from RF radiation work?

Since there are no known risks from exposure to RF emissions from wireless phones, there is no reason to believe that accessories that claim to shield the head from those emissions reduce risks. Some products that claim to shield the user from RF absorption use special phone cases, while others involve nothing more than a metallic accessory attached to the phone. Studies have shown that these products generally do not work as advertised. Unlike “hand free” kits, these so called “shields” may interfere with proper operation of the phone. The phone may be forced to boost its power to compensate, leading to an increase in RF absorption. In February 2002, the Federal trade Commission (FTC) charged two companies that sold devices that claimed to protect wireless phone users from radiation with making false and unsubstantiated claims. According to FTC, these defendants lacked a reasonable basis to substantiate their claim.

What about wireless phone interference with medical equipment?

Radio frequency energy (RF) from wireless phones can interact with some electronic devices. For this reason, FDA helped develop a detailed test method to measure electromagnetic interference (EMI) of implanted cardiac pacemakers and defibrillators from wireless telephones. This test method is now part of a standard sponsored by the Association for the Advancement of Medical instrumentation

(AAMI). The final draft, a joint effort by FDA, medical device manufacturers, and many other groups, was completed in late 2000. This standard will allow manufacturers to ensure that cardiac pacemakers and defibrillators are safe from wireless phone EMI. FDA has tested wireless phones and helped develop a voluntary standard sponsored by the Institute of Electrical and Electronic Engineers

(IEEE). This standard specifies test methods and performance requirements for hearing aids and wireless phones so that no interference occurs when a person uses a compatible phone and a compatible hearing aid at the same time. This standard was approved by the IEEE in 2000.

FDA continues to monitor the use of wireless phones for possible interactions with other medical devices. Should harmful interference be found to occur, FDA will

conduct testing to assess the interference and work to resolve the problem.

Additional information on the safety of RF exposures from various sources can be obtained from the following organizations:

FCC RF Safety Program: http://www.fcc.gov/oet/rfsafety/

Environmental Protection Agency (EPA): http://www.epa.gov/radiation/

Occupational Safety and Health Administration's (OSHA):

http://www.osha.gov/SLTC/radiofrequencyradiation/index.html

National institute for Occupational Safety and Health (NIOSH): http://www.cdc.gov/niosh/

World health Organization (WHO): http://www.who.int/peh-emf/

International Commission on Non-Ionizing Radiation Protection: http://www.icnirp.de

National Radiation Protection Board (UK): http://www.hpa-radiationservices.org.uk/rpa

Updated 4/3/2002: US food and Drug Administration http://www.fda.gov/Radiation-

EmittingProducts/RadiationEmittingProductsandProcedures/HomeBusinessandEntertainment/

CellPhones/default.htm

Road Safety

Your wireless phone gives you the powerful ability to communicate by voice, almost anywhere, anytime. But an important responsibility accompanies the benefits of wireless phones, one that every user must uphold.

When driving a car, driving is your first responsibility. When using your wireless phone behind the wheel of a car, practice good common sense and remember the following tips:

1. Get to know your wireless phone and its features, such as speed dial and redial. If available, these features help you to place your call without taking your attention off the road.

2. When available, use a hands-free device. If possible, add an additional layer of convenience and safety to your wireless phone with one of the many hands free accessories available today.

3. Position your wireless phone within easy reach. Be able to access your wireless phone without removing your eyes from the road. If you get an incoming call at an inconvenient time, let your voice mail answer it for you.

4. Let the person you are speaking with know you are driving; if necessary, suspend the call in heavy traffic or hazardous weather conditions. Rain, sleet, snow, ice and even heavy traffic can be hazardous.

5. Do not take notes or look up phone numbers while driving. Jotting down a “to do” list or flipping through your address book takes attention away from your primary responsibility, driving safely.

6. Dial sensibly and assess the traffic; if possible, place calls when you are not moving or before pulling into traffic. Try to plan calls when your car will be stationary. If you need to make a call while moving, dial only a few numbers, check the road and your mirrors, then continue.

7. Do not engage in stressful or emotional conversations that may be distracting.

Make people you are talking with aware you are driving and suspend conversations that have the potential to divert your attention from the road.

8. Use your wireless phone to call for help. Dial 9-1-1 or other local emergency number in the case of fire, traffic accident or medical emergencies.

Remember, it is a free call on your wireless phone!

9. Use your wireless phone to help others in emergencies. If you see an auto accident, crime in progress or other serious emergency where lives are in danger, call 9-1-1 or other local emergency number, as you would want others to do for you.

10. Call roadside assistance or a special non-emergency wireless assistance number when necessary. If you see a broken-down vehicle posing no serious hazard, a broken traffic signal, a minor traffic accident where no one appears injured, or a vehicle you know to be stolen, call roadside assistance or other special non-emergency number.

“The wireless industry reminds you to use your phone safely when driving.”

For more information, please call 1-888-901-SAFE, or visit our web-site www.wow-com.com

Provided by the Cellular Telecommunications & Internet Association

Operating Environment

Remember to follow any special regulations in force in any area and always switch your phone off whenever it is forbidden to use it, or when it may cause interference or danger. When connecting the phone or any accessory to another device, read its user's guide for detailed safety instructions. Do not connect incompatible products.

As with other mobile radio transmitting equipment, users are advised that for the satisfactory operation of the equipment and for the safety of personnel, it is recommended that the equipment should only be used in the normal operating position.

Using Your Phone Near Other Electronic Devices

Most modern electronic equipment is shielded from radio frequency (RF) signals.

However, certain electronic equipment may not be shielded against the RF signals from your wireless phone. Consult the manufacturer to discuss alternatives.

Pacemakers

Pacemaker manufacturers recommend that a minimum distance of 15 cm (6 inches) be maintained between a wireless phone and a pacemaker to avoid potential interference with the pacemaker.

These recommendations are consistent with the independent research and recommendations of Wireless Technology Research.

Persons with pacemakers:

should always keep the phone more than 15 cm

(6 inches) from their pacemaker when the phone is switched on.

should not carry the phone in a breast pocket.

should use the ear opposite the pacemaker to minimize potential interference.

If you have any reason to suspect that interference is taking place, switch your phone off immediately.

Hearing Aids

Some digital wireless phones may interfere with some hearing aids. In the event of such interference, you may wish to consult your hearing aid manufacturer to discuss alternatives.

Other Medical Devices

If you use any other personal medical devices, consult the manufacturer of your device to determine if it is adequately shielded from external RF energy. Your physician may be able to assist you in obtaining this information. Switch your phone off in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.

Vehicles

RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles. Check with the manufacturer or its representative regarding your vehicle. You should also consult the manufacturer of any equipment that has been added to your vehicle.

Posted Facilities

Switch your phone off in any facility where posted notices require you to do so.

Potentially Explosive Environments

Switch your phone off when in any area with a potentially explosive atmosphere and obey all signs and instructions. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death.

Users are advised to switch the phone off while at a refueling point (service station).

Users are reminded of the need to observe restrictions on the use of radio equipment in fuel depots (fuel storage and distribution areas), chemical plants or where blasting operations are in progress.

Areas with a potentially explosive atmosphere are often but not always clearly marked. They include below deck on boats, chemical transfer or storage facilities, vehicles using liquefied petroleum gas (such as propane or butane), areas where the air contains chemicals or particles, such as grain, dust or metal powders, and any other area where you would normally be advised to turn off your vehicle engine.

Emergency Calls

This phone, like any wireless phone, operates using radio signals, wireless and landline networks as well as user programmed functions, which cannot guarantee connection in all conditions. Therefore, you should never rely solely on any wireless phone for essential communications (medical emergencies, for example).

Remember, to make or receive any calls the phone must be switched on and in a service area with adequate signal strength. Emergency calls may not be possible on all wireless phone networks or when certain network services and/ or phone features are in use. Check with local service providers.

To make an emergency call:

1. If the phone is not on, switch it on.

2. Key in the emergency number for your present location (for example, 911 or other official emergency number). Emergency numbers vary by location.

3. Press .

If certain features are in use (call barring, for example), you may first need to deactivate those features before you can make an emergency call. Consult this

document and your local cellular service provider.

When making an emergency call, remember to give all the necessary information as accurately as possible. Remember that your phone may be the only means of communication at the scene of an accident; do not cut off the call until given permission to do so.

Restricting Children's access to your Phone

Your phone is not a toy. Children should not be allowed to play with it because they could hurt themselves and others, damage the phone or make calls that increase your phone bill.

FCC Notice and Cautions

FCC Notice

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help.

The phone may cause TV or radio interference if used in close proximity to receiving equipment. The FCC can require you to stop using the phone if such interference cannot be eliminated.

Vehicles using liquefied petroleum gas (such as propane or butane) must comply with the National Fire Protection Standard (NFPA-58). For a copy of this standard, contact the National Fire Protection Association, One Battery march Park, Quincy,

MA 02269, Attn: Publication Sales Division.

Cautions

Changes or modifications made in the radio phone, not expressly approved by

Samsung, will void the user’s authority to operate the equipment.

The use of any unauthorized accessories may be dangerous and void the phone warranty if said accessories cause damage or a defect to the phone.

Although your phone is quite sturdy, it is a complex piece of equipment and can be broken. Avoid dropping, hitting, bending or sitting on it.

Other Important Safety Information

Only qualified personnel should service the phone or install the phone in a vehicle. Faulty installation or service may be dangerous and may invalidate any warranty applicable to the device.

Check regularly that all wireless phone equipment in your vehicle is mounted and operating properly.

Do not store or carry flammable liquids, gases or explosive materials in the same compartment as the phone, its parts or accessories.

For vehicles equipped with an air bag, remember that an air bag inflates with great force. Do not place objects, including both installed or portable wireless equipment in the area over the air bag or in the air bag deployment area. If wireless equipment is improperly installed and the air bag inflates, serious injury could result.

Switch your phone off before boarding an aircraft. The use of wireless phone in aircraft is illegal and may be dangerous to the aircraft's operation.

Failure to observe these instructions may lead to the suspension or denial of telephone services to the offender, or legal action, or both.

Product Performance

Getting the Most Out of Your Signal Reception

The quality of each call you make or receive depends on the signal strength in your area. Your phone informs you of the current signal strength by displaying a number of bars next to the signal strength icon. The more bars displayed, the stronger the signal.

If you're inside a building, being near a window may give you better reception.

Understanding the Power Save Feature

If your phone is unable to find a signal after 15 minutes of searching, a Power Save feature is automatically activated. If your phone is active, it periodically rechecks service availability or you can check it yourself by pressing any key.

Anytime the Power Save feature is activated, a message displays on the screen.

When a signal is found, your phone returns to standby mode.

Maintaining Your Phone's Peak Performance

For the best care of your phone, only authorized personnel should service your phone and accessories. Faulty service may void the warranty.

There are several simple guidelines to operating your phone properly and maintaining safe, satisfactory service.

Place the mobile phone's acoustic output next to your ear for proper orientation.

Do not tamper or alter the phone's antenna.

Don't use the phone if the antenna is damaged.

Speak directly into the phone's receiver.

Avoid exposing your phone and accessories to rain or liquid spills. If your phone does get wet, immediately turn the power off and remove the battery.

If it is inoperable, call Customer Care for service.

Availability of Various Features/Ring Tones

Many services and features are network dependent and may require additional subscription and/or usage charges. Not all features are available for purchase or use in all areas. Downloadable Ring Tones may be available at an additional cost. Other conditions and restrictions may apply. See your service provider for additional information.

Battery Standby and Talk Time

Standby and talk times will vary depending on phone usage patterns and conditions.

Battery power consumption depends on factors such as network configuration, signal strength, operating temperature, features selected, frequency of calls, and voice, data, and other application usage patterns.

Battery Precautions

Never use any charger or battery that is damaged in any way.

Use the battery only for its intended purpose.

If you use the phone near the network's base station, it uses less power; talk and standby time are greatly affected by the signal strength on the cellular network and the parameters set by the network operator.

Battery charging time depends on the remaining battery charge and the type of battery and charger used. The battery can be charged and discharged hundreds of times, but it will gradually wear out. When the operation time

(talk time and standby time) is noticeably shorter than normal, it is time to buy a new battery.

If left unused, a fully charged battery will discharge itself over time.

Use only Samsung-approved batteries and recharge your battery only with

Samsung-approved chargers. When a charger is not in use, disconnect it from the power source. Do not leave the battery connected to a charger for more than a week, since overcharging may shorten its life.

Extreme temperatures will affect the charging capacity of your battery: it may require cooling or warming first.

Do not leave the battery in hot or cold places, such as in a car in summer or winter conditions, as you will reduce the capacity and lifetime of the battery.

Always try to keep the battery at room temperature. A phone with a hot or cold battery may temporarily not work, even when the battery is fully charged.

Li-ion batteries are particularly affected by temperatures below 0 °C (32 °F).

Do not short-circuit the battery. Accidental short- circuiting can occur when a metallic object (coin, clip or pen) causes a direct connection between the + and - terminals of the battery (metal strips on the battery), for example when you carry a spare battery in a pocket or bag. Short-circuiting the terminals may damage the battery or the object causing the short-circuiting.

Dispose of used batteries in accordance with local regulations. In some areas, the disposal of batteries in household or business trash may be prohibited.

For safe disposal options for Li-Ion batteries, contact your nearest Samsung authorized service center. Always recycle. Do not dispose of batteries in a fire.

Care and Maintenance

Your phone is a product of superior design and craftsmanship and should be treated with care. The suggestions below will help you fulfill any warranty obligations and

allow you to enjoy this product for many years.

Keep the phone and all its parts and accessories out of the reach of small children.

Keep the phone dry. Precipitation, humidity and liquids contain minerals that will corrode electronic circuits.

Do not use the phone with a wet hand. Doing so may cause an electric shock to you or damage to the phone.

Do not use or store the phone in dusty, dirty areas, as its moving parts may be damaged.

Do not store the phone in hot areas. High temperatures can shorten the life of electronic devices, damage batteries, and warp or melt certain plastics.

Do not store the phone in cold areas. When the phone warms up to its normal operating temperature, moisture can form inside the phone, which may damage the phone's electronic circuit boards.

Do not drop, knock or shake the phone. Rough handling can break internal circuit boards.

Do not use harsh chemicals, cleaning solvents or strong detergents to clean the phone. Wipe it with a soft cloth slightly dampened in a mild soap-andwater solution.

Do not paint the phone. Paint can clog the device's moving parts and prevent proper operation.

Do not put the phone in or on heating devices, such as a microwave oven, a stove or a radiator. The phone may explode when overheated.

When the phone or battery gets wet, the label indicating water damage inside the phone changes color. In this case, phone repairs are no longer guaranteed by the manufacturer's warranty, even if the warranty for your phone has not expired.

If your phone has a flash or light, do not use it too close to the eyes of people or animals. This may cause damage to their eyes.

Use only the supplied or an approved replacement antenna. Unauthorized antennas or modified accessories may damage the phone and violate regulations governing radio devices.

If the phone, battery, charger or any accessory is not working properly, take it to your nearest qualified service facility. The personnel there will assist you, and if necessary, arrange for service.

Correct disposal of this product

(Waste Electrical & Electronic Equipment)

(Applicable in the European Union and other European countries with separate collection systems)

This marking shown on the product or its literature, indicates that it should not be

disposed with other household wastes at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.

Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling.

Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal.

Correct disposal of batteries in this product

(Applicable in the European Union and other European countries with separate battery return systems)

This marking on the battery, manual or packaging indicates that the batteries in this product should not be disposed of with other household waste at the end of their working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the battery contains mercury, cadmium or lead above the reference levels in EC

Directive 2006/66. If batteries are not properly disposed of, these substances can cause harm to human health or the environment.

To protect natural resources and to promote material reuse, please separate batteries from other types of waste and recycle them through your local, free battery return system.

Hearing Aid Compatibility with Mobile Phones

When some mobile phones are used near some hearing devices (hearing aids and cochlear implants), users may detect a buzzing, humming, or whining noise. Some hearing devices are more immune than others to this interference noise, and phones also vary in the amount of interference they generate.

The wireless telephone industry has developed ratings for some of their mobile phones, to assist hearing device users in ﬁnding phones that may be compatible with their hearing devices. Not all phones have been rated. Phones that are rated have the rating on their box or a label on the box.

The ratings are not guarantees. Results will vary depending on the user’s hearing device and hearing loss. If your hearing device happens to be vulnerable to interfer-ence, you may not be able to use a rated phone successfully. Trying out the phone with your hearing device is the best way to evaluate it for your personal needs.

M-Ratings: Phones rated M3 or M4 meet FCC requirements and are likely to gener-ate less interference to hearing devices than phones that are not labeled. M4 is the better/higher of the two ratings.

T-Ratings: Phones rated T3 or T4 meet FCC requirements and are likely to be more usable with a hearing device’s telecoil (“T Switch” or “Telephone Switch”) than unrated phones. T4 is the better/higher of the two ratings. (Note that not all hearing devices have telecoils in them.)

Hearing devices may also be measured for immunity to this type of interference. Your hea ring device manufacturer or hearing health professional may help you ﬁnd results for your hearing device. The more immune your hearing aid is, the less likely you are to experience interference noise from mobile phones.

This phone has been tested and rated for use with hearing aids for some of the wireless technologies that it uses. However, there may be some newer wireless technologies used in this phone that have not been tested yet for use with hearing aids. It is important to try the different features of this phone thoroughly and in different locations, using your hearing aid or cochlear implant, to determine if you hear any interfering noise. Consult your service provider or the manufacturer of this phone for information on hearing aid compatibility. If you have questions about return or exchange policies, consult your service provider or phone retailer.

Hello! I am an AI chatbot specifically trained to assist you with the Samsung Galaxy Core Prime User manual. I have thoroughly reviewed the document and can help you locate the exact information you need or explain the content in clear and simple terms. Whether you’re looking for guidance on specific features, troubleshooting steps, or general usage, feel free to ask your questions. The more details you provide about your concerns or needs, the more accurately and effectively I can assist you!

Show related prompts

Assistant typing

Assistant is out of keyboard. Please, try again later.

Key features

Make calls, send messages
Access apps, set up accounts
Connect to a network
Customize appearance
Manage battery life

Frequently asked questions

To make a call, tap the Phone app icon, enter the number, and then tap the Dial key.

To connect to a Wi-Fi network, open Settings, tap Wi-Fi, and select the desired network from the list. If required, enter the password.

You can customize the appearance by changing the wallpaper, theme, and screen lock. You can also adjust the screen brightness and other display settings.

User Manual

Please read this manual before operating your device and keep it for future reference.

Legal Notices

Disclaimer of Warranties;

Exclusion of Liability

Intellectual Property

Open Source Software

Modification of Software

SAFE

(Samsung For Enterprise)

Samsung Telecommunications

America (STA), LLC

Do you have questions about your

Samsung Mobile Phone?

Online Legal Information

Table of Contents

Getting Started

Know Your Device

Calling

Applications

Settings

Getting Started

Learn about your mobile device hardware, assembly procedures, and how to get started using your new device.

Front View

Headset jack

Earpiece Proximity and gesture sensors

Status light

Front camera

Volume

Power/Lock key

Recent apps Home key

Back key

Back View

Flash

Microphone

Infrared transmitter

Camera

Speaker

Microphone

USB charger/Accessory port

Assemble Your Device

Prior to use, it is necessary to install the SIM card, optional memory card (not included), and

the battery.

Remove the Back Cover

Install the SIM Card

Install a Memory Card

Install the Battery

Replace the Back Cover

Charge the Battery

When to Charge the Battery

Set Up Your Device

Turn Your Device On and O

Turning the Device On

Turning the Device O

Welcome Screen

Secure Your Device

Lock the Device

Unlock the Device

Set Up a Secure Screen Lock

Set Up Accounts on Your Device

Google Account

Samsung Account

Know Your Device

Learn some of the key features of your mobile device, including the screens and icons, as well as how to navigate the device and enter text using the keyboard.

Home Screen

Notifications Icons

Status Icons

Status Bar

Widget

Home Screen Indicator

Apps Screen

App

Shortcuts

The Home screen is the starting point for using your device.

Customize your Home screen by adding application shortcuts, widgets, folders, and

using wallpapers.

Manage Home Screens

App Shortcuts

Add a Shortcut to a Home Screen

Remove a Shortcut