Tenda D151 v3 modem router Installation Guide

Below you will find brief information for modem router D151 v3. This modem router is capable of establishing an ADSL connection and providing internet access to a wireless network, with support for up to 150 Mbps wireless data speeds. It comes with a WPS button for easy connectivity to compatible devices and offers multiple Ethernet ports for wired connections. You can easily configure its connection type and wireless settings by accessing its web interface.

PDF

Document

7
Tenda
4 Connect the Modem Router
| LED Indication
LED Status Description
DN | Solid on The modem router is connected to a power supply properly.
[| [| &copy;)
| n sta | | ati О n (3 U | d (a [| Phone Jack Off The modem router is not connected to a power supply.
Intern
You can download the user guide from www.tendacn.com Power unternet Blinking | The system is working properly.
for more details of the modem router. tt
Off The system does not work.
150Mbps Wireless NADSL2+ Modem Router
Model: D151 v3 9 Solidon | The modem router obtains an IP address.
&reg; Blinking The modem router is transmitting data.
iR! Зо оп The WPS negotiation process is successful.
TN
AR LINE Ww Blinking The modem router is performing WPS negotiation with a client device.
9
&gt; DI off The WPS feature is disabled, or the WPS feature is enabled but the
modem router does not perform negotiation with a wireless client.
1 2 3 4 .
NV Splitter Solid on The Wireless feature is enabled.
= MODEM PHONE = Blinking | Datais being transmitted wirelessly.
С) Off The Wireless feature is disabled.
ces DD)
77 Solid on This port is connected to a device properly.
. je Ethernet cable Telephone cable LJ [4] [3]
. Blinking This port is transmitting data.
Packing List PC Telephone [2] [1] | |
Off This port is not connected to a device.
Modem Router * 1
Ethernet саме, 1 Solidon | The modem router establishes an ADSL connection successfully.
Poe Adapter “4 [€ Blinking | The device is doing ADSL negotiation.
Installation Guide * 1 | |
ОН The DSL port is not connected to a device.
If any item is incorrect, missing or damaged, please keep the original package &copy; Note
and contact the vendor for replacement immediately. af you use an Ethernet cable to connect your computer to the internet before using this т. This LED is reserved.
modem router, connect the Ethernet cable to the port 4 of the modem router for internet
access. * Images herein are for reference only. Please refer to the actual product.
KL
/
Confi the Mod Rout
on igure e оает outer If your link type is Phone cable, configure the modem router after the DSL LED lights up and keeps on.
1. Log in to the Modem Router 2. Configure the Internet Parameters
1) Start a web browser, enter 192.168.1.1 in the address bar and tap If your ISP is Airtel(DSL), the modem router will automatically negotiate with Airtel ISP requiring (1) Note
Enter on the keyboard.
&reg; Windows Internet Explorer
+ | 192.168.1.1
File(F) (Edit)E View(V) Add to Favorites(A)
2) Enter the login user name and password (admin for both by default)
and click Login.
Login
Г Disconnected С Connected
User Name | | Connection Status Unconfigured
Password | | |
Primary Setup
Link Type | Phone cable Vv |
Login Connection Type | PPPoE м | (This information provided by local ISP)
Country | India Vv |
ISP | Airtel v |
(В Tip VPINCI vpili |(0-255) voi (0-65535)
If you change the default login user name and password, and forget them, hold down the User Name | maxlength is 64 |
RST button for 6 seconds to reset the modem router to factory default settings, and then
log in to the modem router again with the default login information (admin for both). Password | maxlength is 64 |
no configuration once you plug the DSL port. If not, configure the modem router as below.
1) Link/Connection type: Select the link type and connection type according to your environment.
On Home page, you can enable/disable the wireless feature, and change the wireless
SSID or wireless key.
(Ehternet cable applies to Ethernet access and take Appendix 1: Connect the Modem Router to
the Internet through Ethernet Cable for references.)
2) Country and ISP details: Select your location country and your ISP from the list. Then finish the
ISP details(VPI/VCI, user name and password).
3) Click OK to save and apply your settings.
Wireless Setup--2.4G
Wireless Enable M
Wireless SSID | Airtel_Zerotouch | (Up to 32 ASCII)
Wireless Key [ соевое |
Wireless Key is made up of 8-63 ASCII ог 64 hex characters.
3. Connect Your Wireless Device to the
WiFi of the Modem Router
Use your wireless device to scan the SSID (WiFi name) and
connect to it.
Default wireless SSID: Airtel_Zerotouch
Default wireless key: Airtel@123
(р Note
&laquo; After you connect to the WiFi successfully, you can access the internet.
&laquo; If you want to configure the modem router using your wireless device,
you need to connect it to the WiFi of the modem router first.
Installation Guide
Tenda
|
=: Power
7 Ethernet Jack
Appendix 1: Connect the Modem Router to the Appendix 2: Ports/Buttons Description
Internet through Ethernet Cable
When the modem router only serves as a wireless router, connect itto the internet as follows.
WLAN
OR
WPS
Q
MAMI
ПИЛ
AAA
a
Internet)
If you want to use IPTV service, connect the set-top box to any port
(port 1, 2, 3 or 4) of the modem router. Set-top box TV
Generally, the modem router can automatically negotiate with the set-
top box, and set the port you connected as the IPTV port. [== о]
LAN WAN(4
PC
Connect the computer to port 1, 2 or 3. Connect the internet to the
modem router through port 4.
You can still refer to 2 Configure the Modem Router to configure it.
Link Type: Select Ethernet cable.
internet service provider.
Then complete the other internet parameters according to the information provided by your
Button Description
ON/OFF Turn on/off the modem router.
Fiber modem RST Hold it down for 6 seconds until all LEDs light up once and then release it to
reset the modem router to factory default settings.
Enable the WPS feature on the web UI of the modem router, and then press this
WPS button for 3 seconds to perform WPS negotiation. Within 2 minutes, enable the
WPS feature of the wireless device to establish WPS connection.
WLAN Press it to turn on/off the WiFi of the modem router.
Appendix 3: FAQs
Q1. What can | do if | cannot access the Ul (User Interface)
of the modem router?
Al: Check the local PC IP settings and make sure it is &quot;Obtain an
IP address automatically&quot;, and then retry.
Q2. What can | do if | cannot access the Internet?
A2: Try the following steps one by one:
e Check your cables and make sure they all are plugged well.
(Telephone line, Ethernet cable and power adapter)
e Go through the Internet settings and make sure you have
selected the correct connection type and have typed the network
parameters correctly. If they are not, consult your ISP and replace
them with the correct information.
e If you still cannot access the Internet, reset your modem router to
its factory defaults and reconfigure it.
e Contact our Technical Support if the problem still exists.
ОЗ. What can I do if | forget my password?
e If you forgot the login password, restore the router to its
factory defaults and then use the default login User Name
“admin” and Password “admin” to log in.
Note that you need to reconfigure the router after resetting it
to factory defaults.
e If you forgot your wireless key, log in to the router's User Interface.
And on Home page, you can check or change the wireless key.
Q4. How do | reset the modem router to its factory defaults?
A4: With the router powered on, press and hold the RST button
on the rear panel of the router for about 6 seconds.
(All LEDs will flash and the device restarts.)
Shenzhen Tenda Technology Co., Ltd.
6-8 Floor, Tower E3, No.1001, Zhongshanyuan Road,
Nanshan District, Shenzhen,China. 518052
Website: http://www.tendacn.com
E-mail: [email protected]
Skype: tendasz
Phone: Global hotline: (86 755)27657180
&copy; 2017 Shenzhen Tenda Technology Co., Ltd. All rights reserved.
Tenda is a registered trademark legally held by Shenzhen Tenda Technology Co., Ltd.
Other brand and product names mentioned herein are trademarks or registered trademarks
of their respective holders.
Specifications are subject to change without notice.
Appendix 4: Safety and Emission Statement
CE
CE Mark Warning
This is a Class B product. In a domestic environment, this product may cause radio interference, in
which case the user may be required to take adequate measures.
This equipment should be installed and operated with minimum distance 20cm between the
radiator &amp; your body.
NOTE: (1) The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. (2) To avoid unnecessary radiation interference, it
is recommended to use a shielded RJ45 cable.
HE
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
— Consult the dealer or an experienced radio/TV technician for help.
Operation is subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Radiation Exposure Statement
This equipment should be installed and operated with minimum distance 20cm between
the radiator &amp; your body.
Caution:
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.
This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
NOTE: (1) The manufacturer is not responsible for any radio or TV interference caused
by unauthorized modifications to this equipment. (2) To avoid unnecessary radiation
interference, it is recommended to use a shielded RJ45 cable.
A
BE RECYCLING
This product bears the selective sorting symbol for Waste electrical and electronic
equipment (WEEE). This means that this product must be handled pursuant to European
directive 2012/19/EU in order to be recycled or dismantled to minimize its impact on the
environment.
User has the choice to give his product to a competent recycling organization or to the
retailer when he buys a new electrical or electronic equipment.
Operating Temperature: 0 &deg;C~40 &deg;C
Operating Humidity: (10~90) %RH, non-condensing
">

Hello! I am an AI chatbot specifically trained to assist you with the Tenda D151 v3 modem router Installation Guide. I have thoroughly reviewed the document and can help you locate the exact information you need or explain the content in clear and simple terms. Whether you're looking for guidance on specific features, troubleshooting steps, or general usage, feel free to ask your questions. The more details you provide about your concerns or needs, the more accurately and effectively I can assist you!

Assistant typing

Assistant is out of keyboard. Please, try again later.

It looks like you''ve reached a document that is written in multiple languages, including one that isn''t your native language. You can use the following links to temporarily hide pages without the language you prefer.