DISH remote control User manual

Quick Setup

1

Verify the Key

Note: If you will be using the green TV1 key that comes already installed in your remote, skip this step and proceed with the next step ( Insert the Batteries ).

1 2

Confirm your remote has the green number 1 key installed.

Pull the remote battery cover off.

3

Separate the key from the remote by inserting your thumbnail or a coin in the crease.

Remove the key by grasping at the bottom.

4

Insert the key face up and slide into place.

2

1

Insert the Batteries

2

Insert 4 AAA batteries, making sure to match the plus (+) ends with the plus markings on the battery case.

Replace the remote battery cover.

C-2