Zebra ET80/ET85 Installation Guide

CAUTION: Be aware of the orientation of the battery cover. Failure to replace the battery cover properly may cause damage.

1.

Align the tabs on the underside of the cover with the slot around the battery well.

2.

Ensure that the chamfer on the battery cover is at the bottom left corner of the device.

3.

Carefully press down around the edges of the cover. Make sure that the cover is seated properly.

ZEBRA and the stylized Zebra head are trademarks of

Zebra Technologies Corp., registered in many jurisdictions worldwide. All other trademarks are the property of their respective owners. © 2021 Zebra

Technologies Corp. and/or its affiliates.

All rights reserved. | zebra.com

MN-004281-01EN Rev A