QUICK

INSTALL

CARD

DEVICE

SETUP

VOICE

CONTROL

Method One

D-Link Wi-Fi Setup

1

Download the D-Link Wi-Fi app from the App Store or Google Play.

D-Link Wi-Fi Setup

2

DLINK WIFI

Open the app and tap Install New

Device . Scan the Quick Install Card’s QR code, or select DIR-3040 from the router list. Follow the on-screen instructions to complete the set up.

GPL Code Statement

This D-Link product includes software code developed by third parties, including software code subject to the GNU General Public

License (“GPL”) or GNU Lesser General Public License (“LGPL”). As applicable, the terms of the GPL and LGPL, and information on obtaining access to the GPL code and LGPL code used in this product, are available to view the full GPL Code Statement at: https://tsd.dlink.com.tw/GPL

The GPL code and LGPL code used in this product is distributed

WITHOUT ANY WARRANTY and is subject to the copyrights of one or more authors. For details, see the GPL code and the LGPL code for this product and the terms of the GPL and LGPL.

Written Offer for GPL and LGPL Source Code

Where such specific license terms entitle you to the source code of such software, D-Link will provide upon written request via email and/or traditional paper mail the applicable GPL and LGPLsource code files via CD-ROM for a nominal cost to cover shipping and media charges as allowed under the GPL and LGPL.

Please direct all inquiries to:

Email:

[email protected]

Snail Mail:

Attn: GPLSOURCE REQUEST

D-Link Systems, Inc.

17595 Mt. Herrmann Street

Fountain Valley, CA 92708

Version 1.00(US)_90x130 | 2019/11/04 610000009915

Method Two

Browser Setup

1

Browser Setup

2

Wi-Fi

Browser Setup

3 http://dlinkrouter.local./

Technical Support

Having trouble installing your new product? D-Link’s website contains the latest user documentation and software updates for D-Link products. You can also contact D-Link Technical Support through our website, or phone number below.

United States

Internet: http://support.dlink.com

Phone: 877-453-5465

Note: Browser Setup is only required if you did not install using the D-Link Wi-Fi App.

Connect the power adapter and plug in the router. If the Power LED does not light up, press the Power Button on the back of the router.

SSID:

Password:

SSID:

Password:

When the Power, 2.4GHz, and 5GHz LEDs are solid white, connect your computer to the Wi-Fi name (SSID) printed underneath the device, or on the Quick Install Card.

Type http://dlinkrouter.local./ or http://192.168.0.1

into a web browser and follow the on-screen instructions to complete the setup.

DIR-3040

Quick Install Guide