advertisement
LCD Projector
Model 28A8247
USER'S MANUAL
Please read this user's manual thoroughly to ensure correct usage through understanding
01CP-X870Vol1/E-責 03.1.9 4:19 PM ページ 1
LCD Projector 28A8247
USER'S MANUAL
Vol.1 (Basic)
Thank you for purchasing this projector.
WARNING • Please read the accompanying manual “SAFETY
INSTRUCTIONS” and this “USER'S MANUAL” thoroughly to ensure correct usage through understanding. After reading, store this instruction manual in a safe place for future reference.
NOTE
• The information in this manual is subject to change without notice.
• The manufacturer assumes no responsibility for any errors that may appear in this manual
• The reproduction, transmission or use of this document or contents is not permitted without express written authority.
TRADEMARK ACKNOWLEDGEMENT :
• PS/2, VGA and XGA are registered trademarks of the International Business Machines Corporation.
• Apple, Mac and ADB are registered trademarks of Apple Computer, Inc.
• VESA and SVGA are trademarks of the Video Electronics Standard Association.
• Windows is a registered trademark of Microsoft Corporation.
• All other trademarks are the property of their respective owners.
CONTENTS
Page
PROJECTOR FEATURES ................2
PREPARATIONS ..............................2
PART NAMES ...................................4
SETTING UP
THE PROJECTOR ............................6
CONNECTING
YOUR DEVICES................................8
USING THE REMOTE
CONTROL .......................................13
TURNING ON THE POWER ...........15
TURNING OFF THE POWER .........17
ADJUSTING THE VOLUME ...........18
TEMPORARILY MUTING
THE SOUND....................................18
ADJUSTING THE POSITION..........19
USING THE AUTOMATIC
ADJUSTMENT FEATURE ..............20
CORRECTING KEYSTONE
DISTORTIONS ................................21
Page
USING THE MAGNIFY
FEATURE........................................22
FREEZING THE SCREEN ..............22
ADJUSTING SCREEN WITH
ONE-TOUCH ...................................23
SELECTING THE ASPECT
RATIO..............................................24
TEMPORARILY BLANKING
THE SCREEN..................................24
DISPLAYING CHILD WINDOW
(P. IN. P: Picture in Picture) ..........24
USING THE MENU
FUNCTIONS....................................25
OPERATING THE PC SCREEN .....26
THE LAMP ......................................27
THE AIR FILTER.............................29
OTHER CARE .................................31
1
01CP-X870Vol1/E-責 03.1.9 4:19 PM ページ 2
PROJECTOR
FEATURES
●
Ultra High Brightness
This liquid crystal projector is used to project various computer signals as well as NTSC / PAL /
SECAM video signals onto a screen. Little space is required for installation and large images can easily be realized.
Crisp, ultra-bright presentations is achieved by using a UHB (ultra high brightness) lamp and a highly efficient optical system
●
Partial Magnification Function
Interesting parts of images can be magnified for closer viewing
●
One Touch Function
Just press the ONE TOUCH button to automatically retrieve input signals, calibrate images, and correct keystone distortion
PREPARATIONS
Your projector should come with the items shown below. Check to make sure that all the items are included. Contact your dealer if anything is missing.
NOTE • Keep the original packing material for future reshipment.
2
Projector
(with Lens Cap)
Liquid Crystal Projector
CP-X870
(CP-X870W)
ENGLISH
USER'S MANUAL Vol.1 Basic
Please read this user's manual thoroughly to ensure correct usage through understanding.
BEDIENUNGSANLEITUNG Teil 1 Grundlagen
Bitte lessen Sie diese Benutzerhandbuch zugunsten der korrekten Bedienung aufmerksam.
DEUTSCH
FRANÇAIS l'appareil.
MANUALE D'ISTRUZIONI Vol.1 Informazioni di base
Vi preghiamo voler leggere attentamente il manuale d'istruzioni in modo tale da poter comprendere quanto riportato ai fini di un corretto utilizzo del proiettore.
MANUAL DE USUARIO Vol.1 Básico
Lea cuidadosamente este manual del usuario para poder utilizar corretamente el producto.
GEBRUIKSAANWIJZING Vol.1 Basis
Lees voor het qebruik alstublieft deze handleiding aandachtig door, om volledig profijt te hebben van de uitgebreide mogelijkheden.
BRUKERHÅNDBOK Vol.1 Grunnleggende
Vennligst les denne bruksanvisningen grundig for å være garantert driftssikker bruk.
NSTRUÇÕES DO PROPRIETÁRIO Vol.1 Básico
Para assegurar o uso correto do equipamento, por favor leia atentamente este manual do utilizador.
ITALIANO
ESPAÑOL
NEDERLANDS
NORSK
PORTGÊS
REGULATORY
NOTICES
User's Manuals
(Vol.1/Vol.2)
Safety Instructions
Power cord
(US Type)
RGB cable Video/Audio cable
RS-232C adapter
Two AA batteries
(for the remote control)
STANDBY/ON VIDEO
LASER
INDICATOR
RGB
FOCUS ZOOM
UP
PAGE
DOWN
BLANK LASER
ASPECT
PUSH
ENTER
ESC MENU RESET
POSITION AUTO PinP
MAGNIFY
ON
VOLUME
FREEZE MUTE
OFF
WIRELESS KEYSTONE ONE TOUCH
Remote control
Soft carrying case
Power cord
(UK Type)
Power cord
(Europe Type)
01CP-X870Vol1/E-責 03.1.9 4:19 PM ページ 3
WARNING Precautions to observe in regards to the power cord: Please use extra caution when connecting the projector's power cord as incorrect or faulty connections may result in FIRE AND/OR ELECTRICAL SHOCK. Please adhere to the following safety guidelines to insure safe operation of the projector:
• Only plug the power cord into outlets rated for use with the power cord's specified voltage range.
• Only use the power cord that came with the projector.
• NEVER ATTEMPT TO DEFEAT THE GROUND CONNECTION OF THE THREE-
PRONGED PLUG!
• Make sure that you firmly connect the power cord to the projector and wall outlet.
1
Connect your devices to the projector
Connect your computer, VCR and/or other devices you will be using to the projector.
8 〜 12
2
Insert the batteries into the remote control
13
3
Connect the power cord
(1) Connect the connector of the electrical power cord to the AC inlet of the main unit.
(2) Firmly plug the power cord's plug into the outlet
Power outlet
(1)
AC inlet
(2)
Power cord
3
01CP-X870Vol1/E-責 03.1.9 4:19 PM ページ 4
PART NAMES
The Projector
Indicates the corresponding reference page
INPUT dial 16
RGB indicator 16
BNC indicator 16
DVI indicator
VIDEO indicator
S-VIDEO indicator
COMPONENT indicator
16
16
16
16
DVI
BNC
RGB
VIDEO
S-VIDEO
COMPONENT
STANDBY/ON
INPUT
TENP
21 KEYSTONE button
22 ONE TOUCH button
19 RESET button
KEYSTONE
MENU
ONE TOUCH
RESET
FOCUS
LANP
ZOOM
16
16
25
Vol.2
FOCUS button
ZOOM button
MENU button
9 LAMP indicator
STANDBY/ON button 15
Control Panel
Vol.2
9 TEMP indicator
4
6 Elevator screw
Elevator feet 6
Lens cap 15
29 Air filter
14 Remote sensor
6 Elevator button 15 Lens
COMPONENT VIDEO port 12
CONTROL port 10
WIRELESS & NETWORK
MODULE port Vol.2
7
RGB OUT port 12
DVI port 11
RGB port 10
BNC port 11
AUDIO IN R/L port 12
14 REMOTE CONTROL port
12 VIDEO IN port
12 S-VIDEO IN port
14 Remote sensor
3 AC power inlet
15 Power switch
10 USB port
9 AUDIO OUT port
10 AUDIO IN 1/2 port
01CP-X870Vol1/E-責 03.1.9 4:19 PM ページ 5
The Remote Control
LASER INDICATOR 14
VIDEO button 16
STANDBY/ON button 15
FOCUS buttons 16
BLANK button 24
Disk pad
<For mouse control>
Mouse cursor movement
Left mouse click
26
ASPECT button 24
Left /Right
Key buttons
ESC button
25
25
MENU button 25
POSITION button 19
MAGNIFY buttons 22
WIRELESS button Vol.2
7
KEYSTONE button 21
REMOTE CONTROL port 14
ASPECT
STANDBY/ON VIDEO
LASER
INDICATOR
RGB
FOCUS ZOOM
UP
PAGE
DOWN
BLANK LASER
PUSH
ENTER
ESC MENU RESET
POSITION AUTO PinP
MAGNIFY
ON
VOLUME
FREEZE MUTE
OFF
WIRELESS KEYSTONE ONE TOUCH
* Using the lever switch
Flip toward disk pad : Up ( ) key
Flip toward MENU button: Down ( ) key
Press in center : ENTER button
16 RGB button
16 ZOOM buttons
26 PAGE buttons
14 LASER button
26 Right mouse button
<For mouse control>
Right mouse click
25 Lever switch (*)
19 RESET button
20 AUTO button
24 PinP button
18 VOLUME button
18 MUTE button
22 FREEZE button
23 ONE TOUCH button
(The back)
13 Battery cover
Inside of the Battery cover
Laser switch
1: enables the laser function.
2: disables the laser function.
5
01CP-X870Vol1/E-責 03.1.9 4:19 PM ページ 6
SETTING UP THE PROJECTOR
CAUTION • Install the projector in a suitable environment according to instructions of the accompanying manual “SAFETY INSTRUCTIONS” and this manual.
• If you press the elevator buttons without holding the projector, the projector might crash down, overturn, smash your fingers and possibly result in malfunction. To prevent damaging the projector and injuring yourself, ALWAYS HOLD THE
PROJECTOR whenever using the elevator buttons to adjust the elevator feet.
• An installation angle should be adjusted within the specified adjustment range. The adjustment beyond the range may become the cause of shortening the lamp life.
Adjusting the Projector's Elevator Feet
If the surface on which the projector is placed, or the screen is tilted, use the elevator feet and elevator screw to adjust the projection angle of the main unit.
The adjustment range of the elevator feet is 0 to 10 degrees.
1
Press and hold in the elevator buttons
2
Raise or lower the projector to the desired height and then release the elevator buttons
When you release the elevator buttons, the elevator feet will lock into position.
Elevator button
Elevator feet
3
Turn the elevator screw to fine tune.
Elevator screw
6
01CP-X870Vol1/E-責 03.1.9 4:19 PM ページ 7
Adjusting the Screen Size and Projection Distance
Refer to the illustrations and tables below to determine the screen size and projection distance.
The values shown in the table are calculated for a full size screen a:Distance from the projector to the screen (±10%) b:Distance from the lens center to the bottom of the screen (±10%) c:Distance from the lens center to the top of the screen (±10%)
The screen Top view
If 4:3 aspect ratio
4
3 c
Lens center b
The screen a
Side view
Top view
Screen Size [inch (m)]
30 (0.8)
40 (1.0)
50 (1.3)
60 (1.5)
70 (1.8)
80 (2.0)
90 (2.3)
100 (2.5)
120 (3.0)
150 (3.8)
200 (5.0)
250 (6.3)
300 (7.5) a [inch (m)]
Min.
Max.
b
[inch (cm)] c
[inch (cm)]
42 (1.1) 56 (1.4) 1 (2) 17 (44)
57 (1.4) 75 (1.9) 1 (3) 23 (58)
72 (1.8) 94 (2.4) 1 (4) 29 (73)
87 (2.2) 113 (2.9) 2 (4) 34 (87)
102 (2.6) 133 (3.4) 2 (5) 40 (102)
117 (3.0) 152 (3.9) 2 (6) 46 (116)
131 (3.3) 171 (4.3) 3 (7) 51 (131)
146 (3.7) 190 (4.8) 3 (7) 57 (145)
176 (4.5) 229 (5.8) 3 (9) 69 (174)
221 (5.6) 287 (7.3) 4 (11) 86 (218)
296 (7.5) 383 (9.7) 6 (15) 114 (290)
371 (9.4) 479 (12.2) 7 (18) 143 (363)
446 (11.3) 576 (14.6) 9 (22) 171 (435)
If 16:9 aspect ratio
16
9 b c Lens center a
Side view
Screen Size [inch (m)]
30 (0.8)
40 (1.0)
50 (1.3)
60 (1.5)
70 (1.8)
80 (2.0)
90 (2.3)
100 (2.5)
120 (3.0)
150 (3.8)
200 (5.0)
250 (6.3)
300 (7.5) a [inch (m)]
Min.
Max.
b
[inch (cm)] c
[inch (cm)]
45 (1.2) 61 (1.5) 1 (4) 16 (41)
62 (1.6) 81 (2.1) 2 (5) 21 (54)
78 (2.0) 102 (2.6) 2 (6) 26 (67)
94 (2.4) 123 (3.1) 3 (7) 31 (79)
111 (2.8) 144 (3.7) 3 (8) 36 (92)
127 (3.2) 165 (4.2) 4 (9) 41 (105)
143 (3.6) 186 (4.7) 4 (11) 47 (119)
160 (4.1) 207 (5.3) 5 (12) 53 (135)
192 (4.9) 249 (6.3) 6 (14) 65 (166)
241 (6.1) 312 (7.9) 7 (18) 82 (207)
322 (8.2) 147 (10.6) 9 (24) 106 (270)
404 (10.3) 522 (13.3) 12 (29) 124 (315)
485 (12.3) 627 (15.9) 14 (35) 128 (324)
7
01CP-X870Vol1/E-責 03.1.9 4:19 PM ページ 8
CONNECTING YOUR DEVICES
Devices You Can Connect to the Projector
(Refer to this section for planning your device configuration to use for your presentation.)
CAUTION • Incorrect connecting could result in fire or electrical shock. Please read this manual and the separate “SAFETY INSTRUCTIONS”.
ATTENTION Precautions to observe when connecting other devices to the projector
• Whenever attempting to connect other devices to the projector, please thoroughly read the manual of each device to be connected.
• TURN OFF ALL DEVICES prior to connecting them to the projector. Attempting to connect a live device to the projector may generate extremely loud noises or other abnormalities that may result in malfunction and/or damage to the device and/or projector. Refer to the “TECHNICAL” of the USER’S MANUAL (Vol.2) for the pin assignment of connectors and RS-232C communication data.
• Make sure that you connect devices to the correct port. Incorrect connection may result in malfunction and/or damage to the device and/or projector.
• Some cables have to be used with core set. Use the accessory cable or a designated-type cable for the connection. For cables that have a core only at one end, connect the core to the projector.
• Secure the screws on the connectors and tighten.
Indicates the corresponding reference page
12 Display monitors
11 DVD players
11 VCRs
10 Laptop computers
10 Desktop computers
8
01CP-X870Vol1/E-責 03.1.9 4:19 PM ページ 9
Ports and Cables
Refer to the table below to find out which projector port and cable to use for connecting a given device. Use this table for determining which cables to prepare.
Function Projector Port Connection Cables
Analog RGB input
Analog output
DVI input
Audio input from computer
USB mouse control
RGB
RGB cable
(With D-sub 15-pin shrink jack and inch thread screws)
BNC(R/C
R
/P
R
)(G/Y)(B/C
B
/P
B
)(H)(V)
• When BNC (RGB) is selected (*)
BNC cable
RGB OUT
RGB cable
(With D-sub 15-pin shrink jack and inch thread screws)
DVI cable DVI
AUDIO IN 1
• Linked to RGB or DVI port input
AUDIO IN 2
• Linked to BNC (RGB) port input (*)
USB
Audio/video cable (Stereo mini)
USB cable
PS/2 mouse control
ADB mouse control
Serial mouse control
RS-232C communications
S video input
Video input
CONTROL
PS/2 mouse cable
ADB mouse cable
Serial mouse cable
RS-232C adapter + RS-232C cable
S-video cable (mini DIN 4-pin jack)
Audio/video cable
S-VIDEO IN
VIDEO IN
Component video input
COMPONENT(C
R
/P
R
)(C
B
/P
B
)(Y)
BNC(R/C
R
/P
R
)(G/Y)(B/C
B
/P
B
)
• When BNC (COMPONENT) is selected (*)
Component video cable
Audio input from video equipment AUDIO IN R,L Audio/video cable or audio cable (RCA jack)
Audio output AUDIO OUT Audio cable (Stereo mini)
Wired remote control signal input REMOTE CONTROL Audio cable (Stereo mini)
* Before using the BNC port, change RGB input to component video input on the BNC menu item of the INPUT menu.
NOTE About Plug-and-Play Capability
• This projector is compatible with VESA DDC 1/2B. Plug-and-Play can be achieved by connecting this projector to computers that are VESA DDC (display data channel) compatible. Please take advantage of this function by connecting the accessory RGB cable to the RGB port (DDC 1/2B compatible). Plug-and-Play may not work properly if any other type of connection is attempted.
• Plug-and-Play is a system composed of the computer, its operating system and peripheral equipment (i.e. display devices).
• Please use the standard drivers as this projector is a Plug-and-Play monitor.
9
01CP-X870Vol1/E-責 03.1.9 4:19 PM ページ 10
CONNECTING YOUR DEVICES (continued)
Connecting to a Computer
ATTENTION Whenever attempting to connect a laptop computer to the projector, be sure to activate the laptop's RGB external image output (set the laptop to CRT display or to simultaneous LCD and CRT display). For details on how this is done, please refer to the instruction manual of the corresponding laptop computer.
DVI
A
RGB
R/C
R
/P
R
G/Y
RGB OUT
B/Ca/Pa H V
CONTROL
C
R
/P
R
Ca/Pa Y
REMOTE
CONTROL
COMPONENT VIIDEO
R-AUDIO IN-L VIDEO IN
1 2
B
AUDIO IN AUDIO OUT
S-VIDEO IN
USB BNC
A B
DVI
A
RGB
R/C
R
/P
R
G/Y
RGB OUT
B/Ca/Pa H V
B
CONTROL
C
R
/P
R
Ca/Pa Y
REMOTE
CONTROL
COMPONENT VIIDEO
R-AUDIO IN-L VIDEO IN
1 2
C
AUDIO IN AUDIO OUT
S-VIDEO IN
D
USB BNC
A B C D
USB cable
If connecting to a
USB port equipped computer
10
Desktop computer
Laptop computer
NOTE
• Some computers may have multiple display screen modes. Use of some of these modes will not be possible with this projector.
• For some RGB input modes, the optional Mac adapter is necessary.
01CP-X870Vol1/E-責 03.1.9 4:19 PM ページ 11
Connecting to a Computer (continued)
DVI
BNC Input
C
R
/P
R
Ca/Pa
REMOTE
CONTROL
Y COMPONENT VIIDEO
RGB RGB OUT
R/C
R
/P
R
G/Y B/Ca/Pa
A A A A A
BNC
H V
CONTROL
R-AUDIO IN-L VIDEO IN
1 2
B
AUDIO IN AUDIO OUT
S-VIDEO IN
USB
A B
A
DVI
DVI Input
C
R
/P
R
Ca/Pa Y
REMOTE
CONTROL
COMPONENT VIIDEO
RGB
R/C
R
/P
R
G/Y
RGB OUT
B/Ca/Pa H V
CONTROL
R-AUDIO IN-L VIDEO IN
1 2
B
AUDIO IN AUDIO OUT
S-VIDEO IN
USB BNC
A B
Desktop computer Desktop computer
11
01CP-X870Vol1/E-責 03.1.9 4:19 PM ページ 12
CONNECTING YOUR DEVICES (continued)
Connecting to a DVD Player Connecting to a VCR
DVI
RGB
R/C
R
/P
R
G/Y
RGB OUT
B/Ca/Pa H V
CONTROL
REMOTE
CONTROL
C
R
/P
R
Ca/Pa Y
A A A
COMPONENT VIIDEO
B B B C
R-AUDIO IN-L VIDEO IN
1 2
S-VIDEO IN
BNC
A B
AUDIO IN AUDIO OUT USB
C
DVI
RGB
R/C
R
/P
R
G/Y
RGB OUT
B/Ca/Pa H V
CONTROL
C
R
/P
R Ca/Pa
REMOTE
CONTROL
Y COMPONENT VIIDEO
1
A A A B
R-AUDIO IN-L VIDEO IN
S-VIDEO IN
2
BNC AUDIO IN AUDIO OUT USB
A B
S-VIDEO cable
If using a S-video connection
S-VIDEO cable
If using a S-video
connection
If using a component video connection
If using an audio/video connection
DVD player
Connecting to a Display Monitor
DVI
RGB
R/C
R
/P
R
G/Y
A
RGB OUT
B/Ca/Pa H V
CONTROL
C
R
/P
R Ca/Pa
REMOTE
CONTROL
Y
COMPONENT VIIDEO
R-AUDIO IN-L VIDEO IN
1 2
S-VIDEO IN
BNC
A
AUDIO IN AUDIO OUT USB
VCR
12
Display monitor
01CP-X870Vol1/E-責 03.1.9 4:19 PM ページ 13
USING THE REMOTE CONTROL
Putting batteries into the remote control unit
CAUTION Precautions to observe in regards to the batteries
Always handle the batteries with care and use them only as directed. Improper use may result in battery cracking or leakage, which could result in fire, injury and/or pollution of the surrounding environment.
• Keep the battery away from children and pets.
• Be sure to use only the batteries specified for use with the remote control. Do not mix new batteries with used ones.
• When inserting batteries, verify that the plus and minus terminals are aligned correctly (as indicated in the remote control).
• When you dispose the battery, you should obey the law in the relative area or country.
1
Remove the battery cover
Slide back and remove the battery cover in the direction of the arrow.
2
Insert the batteries
Align and insert the two AA batteries (that came with the projector) according to their plus and minus terminals (as indicated in the remote control).
3
Close the battery cover
Replace the battery cover in the direction of the arrow and snap it back into place.
13
01CP-X870Vol1/E-責 03.1.9 4:19 PM ページ 14
USING THE REMOTE CONTROL (continued)
Operating the remote control
WARNING • The laser pointer of the remote control transmitter is used in place of a finger or rod. Never look directly into the laser beam outlet or point the laser beam at other people. The laser beam can cause vision problems.
CAUTION • Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
14
This remote control has the switch to disable the laser function. Refer to "The Remote Control".
• The remote control works with both the projector's front and rear remote sensors.
• The range of the remote sensor on the front is 3 meters with a 60-degree range (30 degrees to the left and right of the remote sensor), and back is 3 meters with a 40-degree range.
• Since the remote control uses infrared light to send signals to the projector (Class 1 LED), be sure to use the remote control in an area free from obstacles approximately
3 meters
30 degrees
20 degre approximately
3 meters es that could block the remote control's output signal to the projector.
• The wired remote control:
You can use the remote control as a wired remote control, by connecting the REMOTE CONTROL ports of the main unit and remote control via an audio cable (3.5 dia. stereo mini cable with plugs).
ATTENTION Precautions to observe when using the remote control
• Do not disassemble the remote control.
• Do not drop or otherwise expose the remote control to physical impact.
• Do not get the remote control wet or place it on wet objects. Doing so may result in malfunction.
• Do not place the remote control near the projector’s lens, fan, or vents.
• Remove the batteries from the remote control and store them in a safe place if you won't be using the remote control for an extended period.
• Replace the batteries whenever the remote control starts to malfunction.
• When strong light, such as direct sunlight or light from an extremely close range (such as from an inverter fluorescent lamp), hits the projector's remote sensor, the remote control may cease to function.
Adjust the direction of the projector to keep light from directly hitting the projector's remote sensor.
01CP-X870Vol1/E-責 03.1.9 4:19 PM ページ 15
TURNING ON THE POWER
Precautions
Connect all devices to be used to the projector prior to turning on the power.
8
〜
12
WARNING When the power is ON, a strong light is emitted. Do not look into the lens.
STANDBY/ON VIDEO
LASER
INDICATOR
RGB
FOCUS ZOOM
UP
PAGE
DOWN
BLANK LASER
1
Make sure that the power cord is firmly and correctly connected to the projector and outlet
3
2
Turn on the projector's power
Set the power switch to [ | ] (ON). The STANDBY/ON indicator will light to solid orange.
power switch
Control panel
BNC
RGB
DVI
VIDEO
S-VIDEO
COMPONENT
STANDBY/ON
INPUT
KEYSTONE
ONE TOUCH
RESET
FOCUS ZOOM
MENU
TENP LANP
STANDBY/ON indicator
NOTE Turn the power on/off in right order.
• Power on the projector before the computer or video tape recorder.
• Power off the projector after the computer or video tape recorder.
3
Press the STANDBY/ON button (control panel or remote control)
• The projector begins warming up and the
STANDBY/ON indicator blinks green.
• The STANDBY/ON indicator stops blinking and lights to solid green once the projector's power is completely on.
STANDBY/ON
4
Remove the lens cap
The picture is projected.
15
01CP-X870Vol1/E-責 03.1.9 4:19 PM ページ 16
TURNING ON THE POWER (continued)
Selecting an Input Signal
5 Using the remote control
If selecting RGB input
Press the RGB button
Press this button to toggle between the devices connected to RGB IN 1 and 2. As illustrated below, each time you press the RGB button, the projector switches between RGB IN 1 and 2.
Select the signal you wish to project.
• When BNC (RGB) is selected:
RGB BNC(RGB) DVI
RGB
Using the projector's control panel
Turn the INPUT dial
Turning the dial cycles through the inputs as shown below. Select the terminal to which the signal you want to project is input.
GB
• When BNC (RGB) is selected:
RGB BNC(RGB)
INPUT
DVI
• When BNC (COMPONENT) is selected:
RGB DVI
If selecting video input
Press the VIDEO button
Press this button to toggle between the devices connected to VIDEO IN, S-VIDEO
IN and COMPONENT VIDEO. As illustrated below, each time you press the
VIDEO
VIDEO button, the projector switches between
VIDEO IN, S-VIDEO IN and COMPONENT VIDEO.
Select the signal you wish to project.
• When BNC (RGB) is selected:
VIDEO IN S-VIDEO IN COMPONENT VIDEO
COMPONENT VIDEO S-VIDEO VIDEO
• When BNC (COMPONENT) is selected:
RGB BNC(COMPONENT) DVI
COMPONENT VIDEO S-VIDEO VIDEO
NOTE
Turn the INPUT dial and set it at the click point, otherwise input signal selection may be incorrect.
16
6
7
• When BNC (COMPONENT) is selected:
VIDEO IN S-VIDEO IN COMPONENT VIDEO
BNC(COMPONENT)
Use the ZOOM the screen size
Use the FOCUS the focus
/
/ buttons to adjust ZOOM
ZOOM
(Control panel) (Remote control)
FOCUS buttons to adjust
FOCUS
(Control panel) (Remote control)
01CP-X870Vol1/E-責 03.1.9 4:19 PM ページ 17
TURNING OFF THE POWER
STANDBY/ON VIDEO
LASER
INDICATOR
RGB
1
Press the STANDBY/ON button (control panel or remote control)
The message "Power off?" will appear on the screen for approximately 5 seconds.
STANDBY/ON
FOCUS ZOOM
UP
PAGE
DOWN
BLANK LASER
ASPECT
PUSH
ENTER
ESC MENU RESET
POSITION AUTO PinP
MAGNIFY
ON
VOLUME
FREEZE MUTE
OFF
WIRELESS KEYSTONE ONE TOUCH
2
Press the STANDBY/ON button again
(control panel or remote control)
Press the STANDBY/ON button again while the "Power off?" message is visible. The projector lamp goes off and starts cooling down. While cooling, the STANDBY/ON indicator flashes orange.
When in this state, pressing the STANDBY/ON button has no effect.
When lamp cooling is complete, the STANDBY/ON indicator stops flashing, and turning solid orange.
STANDBY/ON
Control panel
BNC
RGB
DVI
VIDEO
S-VIDEO
COMPONENT
STANDBY/ON
INPUT
KEYSTONE
ONE TOUCH
RESET
FOCUS ZOOM
MENU
TENP LANP
3
Check that the STANDBY/ON indicator stops blinking and lights to power switch solid orange.
Switch the power switch to
[O] (OFF).
STANDBY/ON indicator
NOTE
• Except in cases of emergency, do not turn off the power switch while the
STANDBY/ON indicator is solid or flashing green.
Doing so could shorten the lamp lifetime.
4
Confirm that the STANDBY/ON indicator has gone off and then attach the lens cap.
When the projector has completed powering down, the
STANDBY/ON indicator will go off.
17
01CP-X870Vol1/E-責 03.1.9 4:20 PM ページ 18
ADJUSTING THE VOLUME
STANDBY/ON VIDEO
LASER
INDICATOR
RGB
FOCUS ZOOM
UP
PAGE
DOWN
BLANK LASER
1
Press the VOLUME button
As illustrated on the right, a dialog will appear on the screen to aid you in adjusting the volume.
VOLUME
ASPECT
PUSH
ENTER
ESC MENU RESET
POSITION AUTO PinP
MAGNIFY
ON
VOLUME
FREEZE MUTE
OFF
WIRELESS KEYSTONE ONE TOUCH
VOLUME
16
2
Use the lever switch / to adjust the volume
Press the VOLUME button again to close the dialog and complete this operation. (Even if you don't do anything, the dialog will automatically disappear after a few seconds.)
VOLUME
Press this to increase the volume
Press this to decrease the volume
16
TEMPORARILY MUTING THE SOUND
DOWN
LASER BLANK
ASPECT
1
Press the MUTE button
As illustrated on the right, a dialog will appear on the screen indicating that you have muted the sound. Press the VOLUME button to close the dialog. (Even if you don't do anything, the dialog will automatically disappear after a few seconds.)
Press the MUTE button again to restore the sound.
VOLUME
MUTE
PUSH
ENTER
ESC MENU RESET
POSITION AUTO PinP
MAGNIFY
ON
VOLUME
FREEZE MUTE
OFF
WIRELESS KEYSTONE ONE TOUCH
16
18
01CP-X870Vol1/E-責 03.1.9 4:20 PM ページ 19
ADJUSTING THE POSITION
STANDBY/ON VIDEO
LASER
INDICATOR
RGB
FOCUS ZOOM
UP
PAGE
DOWN
BLANK LASER
1
Press the POSITION button
As illustrated on the right, a dialog will appear on the screen to aid you in adjusting the position.
POSITION
POSITION
ASPECT
PUSH
ENTER
ESC MENU RESET
POSITION AUTO PinP
MAGNIFY
ON
VOLUME
FREEZE MUTE
OFF
WIRELESS KEYSTONE ONE TOUCH
2
Use the , , , buttons to adjust the position
When you want to initialize the position, press the RESET button during adjustment.
Press the POSITION button again to close the dialog and complete this operation. (Even if you don't do anything, the dialog will automatically disappear after a few seconds.)
This function is only available for RGB/BNC (RGB) input.
19
01CP-X870Vol1/E-責 03.1.9 4:20 PM ページ 20
USING THE AUTOMATIC ADJUSTMENT FEATURE
BLANK LASER 1
Press the AUTO button
AUTO
ASPECT
PUSH
ENTER
ESC MENU RESET
POSITION AUTO PinP
MAGNIFY
ON
VOLUME
FREEZE MUTE
OFF
WIRELESS KEYSTONE ONE TOUCH
Automatic Adjustment for RGB Input
Horizontal position (H. POSIT), vertical position (V.
POSIT), clock phase (H. PHASE) and horizontal size (H.
SIZE) are automatically adjusted.
Make sure that the application window is set to its maximum size prior to attempting to use this feature.
Dark pictures may still be incorrectly adjusted. Use a bright screen when adjusting.
Automatic Adjustment for Video Input
The signal type best suited for the respective input signal is selected automatically.
This feature is available only if VIDEO is set to AUTO in the INPUT menu.
NOTE
The automatic adjustment operation requires approximately 10 seconds. Also, please note that it may not function correctly with some input signals.
20
01CP-X870Vol1/E-責 03.1.9 4:20 PM ページ 21
CORRECTING KEYSTONE DISTORTIONS
ASPECT
1
Press the KEYSTONE button
As illustrated on the right, a dialog will appear on the screen to aid you in correcting the distortion.
KEYSTONE
PUSH
ENTER
ESC MENU RESET
POSITION AUTO PinP
MAGNIFY
ON
VOLUME
FREEZE MUTE
OFF
WIRELESS KEYSTONE ONE TOUCH
2
KEYSTONE
Use the , buttons to select the direction of distortion to correct ( / )
16
3 Use the lever switch / to correct distortion
Press the KEYSTONE button again to close the dialog and complete this operation. (Even if you don't do anything, the dialog will automatically disappear after a few seconds.)
NOTE
• This function may not be work well with some types of input signals.
• The adjustable range for correcting keystone distortions will vary with the type of input signal.
21
01CP-X870Vol1/E-責 03.1.9 4:20 PM ページ 22
BLANK
USING THE MAGNIFY FEATURE
DOWN 1
Press the MAGNIFY (ON) button
The projector enters MAGNIFY mode.
MAGNIFY
ON
LASER
ASPECT
PUSH
ENTER
ESC MENU RESET
POSITION AUTO PinP
MAGNIFY
ON
VOLUME
FREEZE MUTE
OFF
WIRELESS KEYSTONE ONE TOUCH
2
Press the POSITION button, then use the lever switch
/ , / to select the area to zoom. Press the
POSITION button again to finalize the zoom area.
POSITION POSITION
3 Use the lever switch / to adjust the zoom level
Press the MAGNIFY (OFF) button to exit MAGNIFY mode and restore the screen to normal. (The projector will also automatically exit MAGNIFY mode if there is a change in the input signal's state.)
NOTE
The projector will automatically exit from MAGNIFY mode if either the INPUT SELECT,
AUTO, ASPECT or VIDEO feature is used, or, if there is a change in the input signal's state.
FREEZING THE SCREEN
PUSH
ENTER
ESC MENU RESET
POSITION AUTO PinP
MAGNIFY
ON
VOLUME
FREEZE MUTE
OFF
WIRELESS KEYSTONE ONE TOUCH
1
Press the FREEZE button
The [II] icon appears and the screen will freeze at the current image. Press the FREEZE button again and the [ ] appears as the projector exits FREEZE mode.
FREEZE
22
NOTE
• The projector will automatically exit from FREEZE mode if either the POSITION, VOLUME, MUTE, AUTO,
BLANK ON/OFF or MENU ON/OFF feature is used, or, if there is a change in the input signal's state.
• If the projector continues projecting the same image for a long time (i.e. you forget to exit FREEZE mode), the image might possibly remain as an afterimage. Do not leave the projector in FREEZE mode for too long.
01CP-X870Vol1/E-責 03.1.9 4:20 PM ページ 23
ADJUSTING SCREEN WITH ONE-TOUCH
FOCUS ZOOM PAGE
DOWN
BLANK LASER
ASPECT
PUSH
ENTER
ESC MENU RESET
POSITION AUTO PinP
MAGNIFY
ON
VOLUME
FREEZE MUTE
OFF
WIRELESS KEYSTONE ONE TOUCH
1
Press the ONE TOUCH button
You can activate the following functions just by pressing the ONE TOUCH button:
ONE TOUCH
(1) Signal search: Cycle through input signals, displaying the images of retrieved signals. If no signal is found, returns to the signal that was selected before the search was begun.
• When BNC (RGB) is selected:
RGB BNC(RGB) DVI
COMPONENT VIDEO S-VIDEO VIDEO
• When BNC (COMPONENT) is selected:
RGB BNC(COMPONENT) DVI
COMPONENT VIDEO S-VIDEO VIDEO
(2) Automatic adjustment: In RGB mode, automatically adjust the picture position and size; for VIDEO input,
(3) Automatic keystone distortion correction: This is only performed if ONE TOUCH of the AUTO menu is set to
TURN ON. When performed, the unit automatically corrects vertical keystone distortion due to the (forward/backward)
NOTES
• May not function properly with some input signals.
• This function takes about 10 seconds to display an image.
23
01CP-X870Vol1/E-責 03.1.9 4:20 PM ページ 24
SELECTING THE ASPECT RATIO
BLANK
ASPECT
DOWN
LASER
1
Press the ASPECT button
RGB, DVI, COMPONENT VIDEO
(HDTV signals : 1125i (1035i/1080i), 750p)
4:3 16:9
VIDEO IN, S-VIDEO IN, COMPONENT VIDEO
(Non-HDTV signals : 525i, 525p,625i)
4:3 16:9 SMALL
ASPECT
PUSH
ENTER
ESC MENU RESET
POSITION AUTO PinP
TEMPORARILY BLANKING THE SCREEN
FOCUS ZOOM
UP
PAGE
DOWN
BLANK LASER
1
Press the BLANK button
The input signal screen is shut off, and a blank screen appears. You can set the blank screen using the menu
(from the SCREEN menu, select BLANK). Press the BLANK button again to remove the blank screen, and return to the input signal screen.
ASPECT BLANK
PUSH
ENTER
ESC MENU RESET
DISPLAYING CHILD WINDOW (P. IN. P: Picture in Picture)
ASPECT
PUSH
ENTER
ESC MENU RESET
POSITION AUTO PinP
MAGNIFY
ON
VOLUME
FREEZE MUTE
OFF
WIRELESS KEYSTONE ONE TOUCH
1
Press the P. in P. Button
You can display the video input in a child window while displaying RGB, BNC, or DVI input.
Display child window
(small)
Display child window
(large)
No display
You can select the video input to display in the child window, and the position of the child window, from the
24
01CP-X870Vol1/E-責 03.1.9 4:20 PM ページ 25
USING THE MENU FUNCTIONS
STANDBY/ON VIDEO
LASER
INDICATOR
RGB
FOCUS ZOOM
UP
PAGE
DOWN
BLANK LASER
1
Press the MENU button
The menu display appears on the screen. The projector has the following menus: MAIN, PICTURE-1, PICTURE-2,
MENU
INPUT, AUTO, SCREEN, and OPTION, WIRELESS. When you select a menu name using the lever switch / , the current settings of items that can be manipulated from that menu are displayed.
ASPECT
PUSH
ENTER
ESC MENU RESET
POSITION AUTO PinP
MAGNIFY
ON
VOLUME
FREEZE MUTE
OFF
WIRELESS KEYSTONE ONE TOUCH
2 Use the lever switch / to select a menu, then press the or ENTER button
The display of the selected menu appears.
[ex. Adjusting SHARPNESS]
Use the lever switch / to select PICTURE-1, then press the or ENTER button.
PUSH
ENTER
MENU
MAIN
PICTURE-1
PICTURE-2
INPUT
AUTO
SCREEN
OPTION
WIRELESS
: SELECT
COLOR BAL R
COLOR BAL B
SHARPNESS
COLOR
TINT
–1
+1
–1
+1
–1
3 Use the lever switch / to select SHARPNESS, then press the or ENTER button
The operation display of the selected item appears. To adjust a numerical value, press the or ENTER button again to switch to the single menu (small display showing only the operation display area).
[ex. Adjusting SHARPNESS]
Use the lever switch / to select SHARPNESS, then press the or ENTER button.
PUSH
ENTER
MENU
MAIN
PICTURE-1
PICTURE-2
INPUT
AUTO
SCREEN
OPTION
WIRELESS
: SELECT
COLOR BAL R
COLOR BAL B
SHARPNESS
COLOR
TINT
0
NOTE
• For details about menu operations, see the separate "MULTI
FUNCTIONAL
SETTINGS" (Vol. 2).
4 Use the lever switch / to adjust the level
Press the MENU button to hide the menu and finish your or ESC button to operation. Alternatively, press the return to the previous display.
[ex. Adjusting SHARPNESS]
Use the lever switch / to adjust the sharpness.
25
01CP-X870Vol1/E-責 03.1.9 4:20 PM ページ 26
OPERATING THE PC SCREEN
You can use the remote control as a simplified mouse or keyboard.
CAUTION Caution: Mistaken use of the mouse/keyboard control could damage your equipment.
• Only connect to a PC.
• Before connecting, read the manuals of the device you will connect.
• Do not unplug the connector cables while the computer is operating.
STANDBY/ON VIDEO
LASER
INDICATOR
RGB
FOCUS ZOOM
UP
PAGE
DOWN
BLANK LASER
ASPECT
PS/2, ADB, Serial Mouse Control
1. Turn off the projector and PC power, and connect the projector’s
CONTROL terminal to the computer via the mouse cable.
2. If a USB cable is connected, disconnect it. If a USB cable is connected, the USB control function is given priority, and mouse control from the CONTROL terminal will not function.
3. Turn on the projector power, then the computer.
The functions in the table below can be controlled. If you have difficulty with control, restart the computer (either from the software or by pressing the restart button).
Available Functions
Move Pointer
Left click with mouse
Right click with mouse
Remote Control Operation
Move using on the disk pad
Press the center of the disk pad
Press the right mouse button
PUSH
ENTER
ESC MENU RESET
POSITION AUTO PinP
MAGNIFY
ON
VOLUME
FREEZE MUTE
OFF
WIRELESS KEYSTONE ONE TOUCH
USB Mouse/Keyboard Control
1. Connect the projector’s USB terminal to a PC using a USB cable.
The functions in the table below can be controlled.
Available Functions
Move Pointer
Remote Control Operation
Left click with mouse
Right click with mouse
Move using
Press the center on the disk pad of the disk pad
Press the right mouse button
Press the keyboard’s
Press the keyboard’s ENTER key
Press keyboard’s PAGE UP key
Press keyboard’s PAGE DOWN key
Press keyboard’s ESC key keys Press
Press the ENTER button
Press PAGE UP button
Press PAGE DOWN button
Press ESC button
26
NOTES
• It may not be possible to control notebook PCs, and other computers with built-in pointing devices (e.g.
track balls), using this remote control. In this case, before connecting go into BIOS (system setup) and select external mouse, and disable the pointing devices. In addition, the mouse may not function if the computer does not have the needed utility program. See your computer’s hardware manual for details.
• The USB control can be used with Windows 95 OSR 2.1 or higher. It may not be possible to use the remote control, depending on the computer’s configurations and mouse drivers.
• The USB control can only be used for the functions listed above. You cannot do things like press two buttons at once (for instance, pressing two buttons at the same time to move the mouse pointer diagonally).
• This function is not available while the lamp is warming up (the POWER indicator flashes green), while adjusting the volume and display, correcting for trapezoidal distortion, zooming in on the screen, using the BLANK function, or displaying the menu screen.
01CP-X870Vol1/E-責 03.1.9 4:20 PM ページ 27
THE LAMP
HIGH VOLTAGE
HIGH TEMPERATURE
HIGH PRESSURE
To replace the lamp, check the model number of the replacement lamp (sold separately) and contact your local dealer.
Replacement lamp model number: DT00571
If the projector is mounted on the ceiling, or if the lamp has broken, ask your dealer to replace the lamp. Lamp replacement is hazardous and should not be attempted by the user.
Before replacing the lamp, make sure the power switch is off and the power cable is not plugged in, then wait at least 45 minutes for the lamp to cool sufficiently. Handling the lamp while hot can cause burns, as well as damaging the lamp.
WARNING
The LCD projector uses a glass lamp bulb. It is a mercury lamp with high internal pressure. High-pressure mercury lamps can break with a loud bang, or burn out, if jolted or scratched, or through wear over time. Each lamp has a different lifetime, and some may burst or burn out soon after you start using them. In addition, when the bulb bursts, it is possible for shards of glass to fly into the lamp housing, and for gas containing mercury to escape from the projector’s vent holes.
• Do not open the lamp cover while the projector is suspended from above. This is dangerous, since if the lamp’s bulb has broken, the shards will fall out when the cover is opened. In addition, working in high places is dangerous, so ask your local dealer to have the lamp replaced even if the bulb is not broken.
• Handle with care: jolting or scratching could cause the lamp bulb to burst during use.
replace the lamp as soon as possible. Using the lamp for long periods of time, or past the replacement date, could cause it to burst. Do not use old (used) lamps; this is a cause of breakage.
• If the lamp breaks soon after the first time it is used, it is possible that there are electrical problems elsewhere besides the lamp. If this happens, contact your local dealer or a service representative.
• If the lamp should break (it will make a loud bang when it does), ventilate the room well, and make sure not to breathe the gas that comes out of the projector vents, or get it in your eyes or mouth.
• If the lamp should break (it will make a loud bang when it does), unplug the power cord from the outlet, and make sure to request a replacement lamp from your local dealer. Note that shards of glass could damage the projector’s internals, or cause injury during handling, so please do not try to clean the projector or replace the lamp yourself.
• Obey local ordinances when disposing of used lamps. In most cases, it is possible to dispose of used bulbs in the same manner as used glass bottles, but in some cases, bulbs are sorted separately.
• Do not use the projector with the lamp cover removed.
27
01CP-X870Vol1/E-責 03.1.9 4:20 PM ページ 28
28
THE LAMP (continued)
Replacing the lamp
All projector lamps will wear out eventually. If used for long periods of time, the image could become darkened, and the color contrast could be impacted as well. We recommend that you replace your lamps early. If the LAMP indicator turns red, the lamp needs to be replaced. (See "Regarding the Indicator
1
Turn off the projector, and unplug the power cord. Allow the lamp bulb to cool for at least 45 minutes, and prepare a new lamp (serial number: DT00571)
4
Insert the new lamp, and tighten the 3 screws firmly to lock it in place
2
After making sure that the projector has cooled adequately, slide the knob of a lamp cover lock as shown in the figure.
Then, one side of the lamp cover is raised. Pull up the lamp cover and remove it, as shown in the figure
Knob of Lamp
Cover Lock
PC
CO LA
MP
5
Interlocking the 2 tabs of the lamp cover to the projector, put the lamp cover on the projector.
Then push the point of the lamp cover to fix it, as shown in the figure.
Make sure that the lamp cover does’t come up
Tabs
3
Unscrew the 3 screws, and slowly pull out the lamp by the handle
• Be careful not to touch the inside of the lamp case.
PC
CO LA MP
PC
CO LA MP
PC
CO LA
MP
Push
6
Turn on the projector power, and reset the lamp timer
• To reset the lamp timer, from the
OPTION menu, select the LAMP
ATTENTION • Make sure that the screws are screwed in firmly. Loose screws could result in damage or injury.
• Do not use with lamp cover removed.
• Do not reset the lamp timer without replacing the lamp. Reset the lamp timer always when replacing the lamp.
NOTE • The LAMP indicator is also red when the lamp unit reaches high temperature.
Before replacing the lamp, switch power off, wait approximately 20 minutes, and switch power on again. If the LAMP indicator is still red, replace the lamp.
01CP-X870Vol1/E-責 03.1.9 4:20 PM ページ 29
THE AIR FILTER
Caring for the air filter
The air filter should be cleaned about every 100 hours. If the LAMP indicator and
TEMP indicator blink red simultaneously, or a message prompts you to clean the air filter when you turn on the unit, the filter needs to be cleaned. (See "Related
1
Turn off the projector, and unplug the power cord
2
Apply a vacuum cleaner to the top of the air filter cover to clean the air filter
Air Filter Cover
3
Turn on the projector, and use the menu to reset the filter timer
• To reset the air filter timer, from the OPTION menu, select FILTER TIME.
29
01CP-X870Vol1/E-責 03.1.9 4:20 PM ページ 30
THE AIR FILTER (continued)
Replacing the air filter
If the soiling will not come off the air filter, or it becomes damaged, then it needs to be replaced. Please contact your local dealer, after confirming the model of your separately sold replacement air filter.
Replacement air filter model: NJ07081
1
Turn off the projector, and unplug the power cord. Prepare a new air filter (one specified for your projector)
2
Remove the air filter cover and air filter
3
Insert the new filter, and replace the filter cover
4
Turn on the projector power, and using the menu, reset the filter timer
• To reset the filter timer, from the OPTION menu, select FILTER TIME.
ATTENTION • Make sure to turn off the power and unplug the power cord before caring for the unit. Please carefully read "Safety Instructions", in order to care for your projector correctly.
• Do not use with air filter cover removed.
• If the air filter becomes clogged by dust or the like, internal temperature rises and could cause malfunction. The power is automatically turned off in order to prevent the unit from overheating internally.
30
01CP-X870Vol1/E-責 03.1.9 4:20 PM ページ 31
OTHER CARE
Caring for the inside of the projector :
In order to ensure the safe use of your projector, please have it cleaned and inspected by your local dealer about once every 2 years. Never try to care for the inside of the unit yourself. Doing so is dangerous.
Caring for the lens :
Lightly wipe the lens with a commercially available lens-cleaning wipe. Do not touch the lens directly with your hand.
Caring for the cabinet and remote control transmitter :
Wipe lightly with gauze or a soft cloth. If soiling is severe, dip a soft cloth in water or a neutral cleanser diluted in water, and wipe lightly after wringing well. Then, wipe lightly with a soft, dry cloth.
ATTENTION • Make sure to turn off the power and unplug the power cord before caring for the unit. Please carefully read "Safety Instructions" in this manual, in order to care for your projector correctly.
• Do not use cleaners or chemicals other than those listed above, including benzene and paint thinner.
• Do not use aerosols or sprays.
• Do not polish or wipe with hard objects.
31
01CP-X885W/Vol2/E-3校 03.1.9 4:38 PM ページ 1
LCD Projector 28A8247
USER'S MANUAL
Vol.2 (Extended)
Thank you for purchasing this projector.
WARNING • Please read the accompanying manual “SAFETY
INSTRUCTIONS” and this “USER'S MANUAL” thoroughly to ensure correct usage through understanding. After reading, store this instruction manual in a safe place for future reference.
NOTE
• The information in this manual is subject to change without notice.
• The manufacturer assumes no responsibility for any errors that may appear in this manual
• The reproduction, transmission or use of this document or contents is not permitted without express written authority.
TRADEMARK ACKNOWLEDGEMENT :
• PS/2, VGA and XGA are registered trademarks of the International Business Machines Corporation.
• Apple, Mac and ADB are registered trademarks of Apple Computer, Inc.
• VESA and SVGA are trademarks of the Video Electronics Standard Association.
• Windows is a registered trademark of Microsoft Corporation.
• All other trademarks are the property of their respective owners.
CONTENTS
Page
MULTIFUNCTIONAL SETTINGS ........................................................................2
WHAT TO DO WHEN YOU THINK A MACHINE DEFECT HAS OCCURRED ......8
SPECIFICATIONS .............................................................................................11
WARRANTY AND AFTER-SERVICE................................................................12
.......................................................................................
For "TECHNICAL" see the end of this manual.
1
01CP-X885W/Vol2/E-3校 03.1.9 4:38 PM ページ 2
MULTIFUNCTIONAL SETTINGS
This device has 8 separate menus: MAIN, PICTURE-1, PICTURE-2, INPUT,
AUTO, SCREEN, OPTION, WIRELESS. Each of these menus is operated using the same methods. The basic operations of these menus are as follows.
Menu screen display : Press the " MENU " button.
Menu selection : Use the lever switch / to select a menu name, then press the or ENTER button.
Item selection : Use the lever switch / to select an item, then press the
ENTER button.
or
Return menu to last previous screen: Press the button or the ESC button.
Execution of settings and/or adjustments: Perform the operation using the lever switch / .
(For further details, read the explanation for each separate menu.)
Initialization of settings and/or adjustments: During operation, press the RESET button.
(Functions that are executed at the same time as a selection, including H PHASE, LANGUAGE selection, and ADJUST, will not be reset.)
End menu operations: Press the MENU button, or do not perform any operation for several seconds.
2
MAIN Menu
With the MAIN menu, the seven items shown in the Table below can be performed.
Perform each operation in accordance with the instructions in the Table.
MAIN Menu
Item
BRIGHT
CONTRAST
ASPECT
PICT.POSIT.
GAMMA
MIRROR
LANGUAGE
MENU
MAIN
PICTURE-1
PICTURE-2
INPUT
AUTO
SCREEN
OPTION
WIRELESS
: SELECT
BRIGHT
CONTRAST
ASPECT
PICT. POSIT.
GAMMA
MIRROR
LANGUAGE
12
Example : MAIN Menu
(BRIGHT)
Description
Adjust Brightness: Light ⇔ Dark
Adjust Contrast: Strong ⇔ Weak
Select Aspect Ratio:
At RGB Input or Hi-Vision 1125i(1035i/1080i)/750p of COMPONENT VIDEO
Input:
4:3 ⇔ 16:9
At VIDEO Input, S-VIDEO Input or 525i/525p/625i of COMPONENT VIDEO Input:
4:3 ⇔ 16:9 ⇔ SMALL
• The SMALL picture may not be displayed correctly with certain input signals.
Select Picture Position (for 16:9/SMALL Picture):
TOP ⇔ CENTER ⇔ BOTTOM
Select Gamma Mode:
NORMAL ⇔ CINEMA ⇔ DYNAMIC
Select Mirror Status:
NORMAL ⇔ H:INVERT ⇔ V:INVERT ⇔ H&V:INVERT
Select Menu Language:
ENGLISH ⇔ FRANÇAIS ⇔ DEUTSCH ⇔ ESPAÑOL ⇔
ITALIANO ⇔ NORSK ⇔ NEDERLANDS ⇔ 日本語 ⇔
POTUGUÊS ⇔ 中文 ⇔
01CP-X885W/Vol2/E-3校 03.1.9 4:38 PM ページ 3
PICTURE-1 Menu
With the PICTURE-1 menu, the five items shown in the Table below can be performed.
Perform each operation in accordance with the instructions in the
Table.
PICTURE-1 Menu
Item Description
COLOR BAL R Adjust Red Color Balance: Dark ⇔ Light
MENU
MAIN
PICTURE-1
PICTURE-2
INPUT
AUTO
SCREEN
OPTION
WIRELESS
: SELECT
COLOR BAL R
COLOR BAL B
SHARPNESS
COLOR
TINT
12
Example : PICTURE1 Menu
(COLOR BAL R)
COLOR BAL B Adjust Blue Color Balance: Dark ⇔ Light
SHARPNESS Adjust Sharpness (for VIDEO/S-VIDEO): Clear ⇔ Soft
COLOR
Adjust COLOR (for VIDEO/S-VIDEO/COMPONENT VIDEO):
Dark ⇔ Light
TINT Adjust Tint (for VIDEO/S-VIDEO): Green ⇔ Red
PICTURE-2 Menu
With the PICTURE-2 menu, the five items shown in the Table below can be performed.
Perform each operation in accordance with the instructions in the
Table.
PICTURE-2 Menu
Item Description
V POSITION Adjust Vertical Position (for RGB): Up ⇔ Down
H POSITION Adjust Horizontal Position (for RGB): Left ⇔ Right
H PHASE
Adjust Horizontal Phase (for RGB/COMPONENT VIDEO):
Right ⇔ Left
• Adjust to eliminate flicker.
MENU
MAIN
PICTURE-1
PICTURE-2
INPUT
AUTO
SCREEN
OPTION
WIRELESS
: SELECT
V POSITION
H POSITION
H PHASE
H SIZE
OVER SCAN
12
Example : PICTURE2 Menu
(V POSITION)
H SIZE
OVER SCAN
Adjust Horizontal Size (for RGB): Large ⇔ Small
• If the horizontal size adjustment is excessive, the image may not be displayed correctly. In such a case, initialize H SIZE with the RESET button.
Select Over-scan Ratio (for VIDEO/S-VIDEO/COMPONENT VIDEO):
LARGE ⇔ MIDDLE ⇔ SMALL
• If you select LARGE, you may note streaking on the top and bottom of the screen, or flicker. If this is irritating, we suggest you select SMALL.
3
01CP-X885W/Vol2/E-3校 03.1.9 4:38 PM ページ 4
MULTIFUNCTIONAL SETTINGS (continued)
INPUT Menu
The three Input menu items listed in the table below can be manipulated. For
RGB input, the reception signal’s horizontal and vertical frequency is displayed on the initial menu screen. Use the table below as a guide for operation.
MENU
MAIN
PICTURE-1
PICTURE-2
INPUT
AUTO
SCREEN
OPTION
WIRELESS
: SELECT
BNC
VIDEO
HDTV
SYNC ON G
P. IN P. INPUT
P. IN P. POSIT
RGB
COMPONENT
Example : INPUT Menu
(BNC)
INPUT Menu
Item
BNC
Description
BNC Pin (R/C
R
/P
R
, G/Y, B/C
B
/P
B
, H, V) function selection:
BNC (RGB) ⇔ BNC (COMPONENT)
(R) (G) (B) (H) (V) (C
R
/P
R
) (Y) (C
B
/P
B
) ( - ) ( - )
(Pins for RGB) (Pins for COMPONENT)
Selecting BNC (RGB) allows the 5 RGB2 pins (R/C
R
/P
R
, G/Y, B/C
B
/P
B
, H, V) to be used as RGB signal BNC input as-is.
Selecting BNC (COMPONENT) allows the 3 leftmost RGB2 pins (R/C
R
/P
R
, G/Y,
B/C
B
/P
B
) to be used as the COMPONENT VIDEO input C
R
/P
R
, Y, and C
B
/P
B pins.
Select Mode of Signal Type (for VIDEO/S-VIDEO):
AUTO ⇔ NTSC ⇔ PAL ⇔ SECAM ⇔ NTSC4.43 ⇔
M-PAL ⇔ N-PAL
VIDEO executed simultaneously so that the optimum signal mode is selected from among the modes listed above.
Use this function if the image becomes unstable with VIDEO/S-VIDEO. (e.g. The image becomes irregular, or lacks color.)
• AUTO mode may not function correctly with a PAL60 signal and certain other signals.
• The AUTO mode operation requires approximately 10 seconds.
• For COMPONENT VIDEO, the signal type is identified automatically even if this function is inactive. For a HDTV signal, refer to the item HDTV below.
HDTV
SYNC ON G
P. IN P. INPUT
P. IN P. POSIT
Select HDTV Signal Mode: 1080i ⇔ 1035i
• If the selected HDTV mode is incompatible with the input signal, the picture may be distorted.
On/Off SYNC ON G Mode: TURN ON ⇔ TURN OFF
Selecting TURN ON turns on the SYNC ON G mode. The SYNC ON G mode allows reception of SYNC on G.
• In the SYNC ON G mode, the picture may be distorted with certain input signals. In such a case, remove the signal connector so that no signal is received and turn SYNC ON G off, and then reconnect the signal.
P. IN P. screen (*) input signal selection: VIDEO ⇔ S-VIDEO
Selects the signal displayed on the P. IN P. subscreen.
P. IN P. screen (*) display position selection:
⇔ ⇔ ⇔
Selects the position at which the P. IN P. subscreen is displayed.
4
(*) The P. IN P. (picture-in-picture) function displays the video signal image in a subscreen (P. IN P. screen) on top of the screen on which the RGB signal image is being displayed. (See “Displaying Child Window” Vol.1
24 .)
01CP-X885W/Vol2/E-3校 03.1.9 4:38 PM ページ 5
AUTO Menu
With the AUTO menu, the four items shown in the Table below can be performed.
Please perform each operation in accordance with the instructions in the Table.
MENU
MAIN
PICTURE-1
PICTURE-2
INPUT
AUTO
SCREEN
OPTION
WIRELESS
: SELECT
ADJUST
KEYSTONE
POWER OFF
ONE TOUCH
EXECUTE
Example : AUTO Menu
(ADJUST)
AUTO Menu
Item Description
Auto Adjust (for RGB): Automatically adjusts H POSITION, V POSITION, H
PHASE, and H SIZE. Use this function with the maximum window size.
Auto Adjust (for VIDEO/S-VIDEO): This function automatically selects the appropriate signal mode depending on input signals. This is only performed if
ADJUST
• This function may not be available with a PAL60 signal and certain other signals.
• The AUTO mode operation requires approximately 10 seconds.
• For COMPONENT VIDEO, the signal type is identified automatically even if this
KEYSTONE
POWER OFF
Automatic keystone distortion correction:
You can automatically correct vertical keystone distortion corresponding to the angle (forward/backward tilt) at which the unit is set up.
• If the projection screen is inclined, or if the projector is angled downwards, it may not be possible to make the correct adjustment when V: INVERT or H&V:
INVERT is selected under the MIRROR item of the MAIN menu.
• When the zoom adjustment is set to the TELE side, automatic correction may be excessive. The automatic correction function should be used with zoom set to WIDE whenever possible.
Adjust POWER OFF Time:
Long (MAX. 99 min.) ⇔ Short (Min. 1 min.) ⇔ (DISABLE: 0 min.)
If the time set here passes without valid signal input (there is no signal input, or signal input is out of specifications), the standby mode is set (see "TURNING
ONE TOUCH selected.
Enabling/disabling the KEYSTONE function using the ONE TOUCH button:
TURN ON ⇔ TURN OFF
Pressing the ONE TOUCH button will automatically retrieve pictures and automatically adjust the screen (see “ADJUSTING SCREEN WITH ONE-
TOUCH” Vol.1
23 ), and you can also set the function to execute KEYSTONE
(see above in this table) simultaneously when pressed. KEYSTONE will be executed if TURN ON is selected.
5
01CP-X885W/Vol2/E-3校 03.1.9 4:38 PM ページ 6
MULTIFUNCTIONAL SETTINGS (continued)
6
SCREEN Menu
With the SCREEN menu, the five items shown in the Table below can be performed.
Please perform each operation in accordance with the instructions in the Table.
MENU
MAIN
PICTURE-1
PICTURE-2
INPUT
AUTO
SCREEN
OPTION
WIRELESS
: SELECT
BLANK
START UP
MyScreen
MyScreen Size
MyScreen Lock
MyScreen
ORIGINAL
Example : SCREEN Menu
(BLANK)
SCREEN Menu
Item
BLANK
Description
Selection of BLANK Screen:
MyScreen ⇔ ORIGINAL ⇔ .
. ⇔ . . .
.
The BLANK Screen may be voluntarily selected. The BLANK Screen is displayed when the screen has been erased (i.e., made to vanish) by manipulating the BLANK button (please refer to the
“Temporarily Blanking the Screen” section of the separate booklet, Vol. 1 (Basic)).
MyScreen: Using the MyScreen category (see this Table, below), one can register a desired screen
(or screens). At the time of factory shipment, this is set as a non-patterned (plain) blue color screen.
ORIGINAL: Existing standard screens. Please make confirmation using the actual screen(s).
Option screens: Various colored non-patterned (plain) screens displayed within the Menus.
• The MyScreen and the ORIGINAL Screen will each change to a non-patterned (plain) black color screen several minutes after being displayed.
START UP
MyScreen
Selection of START UP Screen: MyScreen ⇔ ORIGINAL ⇔ TURN OFF
The START UP Screen may be voluntarily selected. The START UP Screen is displayed when no signal has been inputted, or when spec signals are being inputted.
MyScreen: Using the MyScreen category (see this Table, below), one can register a desired screen
(or screens). At the time of factory shipment, this is set as a non-patterned (plain) blue color screen.
ORIGINAL: Existing standard screens. Please make confirmation using the actual screen(s).
TURN OFF: A non-patterned (plain) blue color screen.
• The MyScreen and ORIGINAL screens will switch to the BLANK screen (see above in this table) a few minutes after being displayed. If the BLANK screen is the MyScreen or
ORIGINAL screen, it will turn immediately to a solid black screen.
Registration of MyScreen:
When this item is executed, the MyScreen Menu for registration of MyScreen for the BLANK Screen and the START UP Screen is displayed. When operations are performed in accordance with this Menu, one can “cut” and register desired screens from among the received images within the display.
1. After the “Do you start capturing this picture?” message has been displayed, pressing the ESC (or
RESET) button interrupts execution of the MyScreen. When the ENTER button is pressed, the picture becomes static (no longer moves), and a frame for picture cutting, as well as the message that follows below, appear. Please press the button when the screen you want to register is currently being displayed.
2. When the “Move the capture area as you want.” message has been displayed, pressing the ESC (or RESET) button will eliminate the static state of the picture, and operations can be performed again from operation 1.
The frame can be moved using the , , , buttons. After designating the screen you want to register, pressing the ENTER button will initiate screen registration. The registration process takes approximately 1 minute to complete.
3. When the registration has been completed, the screen of the registered MyScreen, plus the message, “MyScreen registration is finished,” will be displayed for several seconds, after which the operation is terminated.
MyScreen Size Selection of MyScreen display size: x1 ⇔ FULL
MyScreen Lock
Invalidation of MyScreen registration function: TURN ON ⇔ TURN OFF
When TURN ON is selected, the MyScreen category (see this Table, above) cannot be executed; in this way, one can prohibit rewrites (“writeovers”) of the MyScreen.
01CP-X885W/Vol2/E-3校 03.1.9 4:38 PM ページ 7
OPTION Menu
With the OPTION menu, the five items shown in the Table below can be performed.
Please perform each operation in accordance with the instructions in the Table.
OPTION Menu
Item Description
VOLUME Adjust Volume: High ⇔ Low
IR REMOTE
Selecting the remote control receiver:
The unit has 3 remote control receivers, as shown in the figure to the right (1, 2, and 3). You can select which of them to activate (“v” in the figure), and which to disable.
• The ambient lighting and other factors may prevent the remote control operation from functioning properly. If this happens, use this function to disable receivers being impacted by unneeded light.
MENU
MAIN
PICTURE-1
PICTURE-2
INPUT
AUTO
SCREEN
OPTION
WIRELESS
: SELECT
VOLUME
WHISPER
IR REMOTE
LAMP TIME
FILTER TIME
12
Example : OPTION Menu
(VOLUME)
2
1
1 2 3
1 2 3
1 2 3
1 2 3
1 2 3
1 2 3
1 2 3
3
LAMP TIME
FILTER TIME
Refer to LAMP TIME: When set, this function displays the total time the projector lamp has been used since new.
Reset LAMP TIME [Use this function only when the lamp has been replaced!]:
Depress the RESET button for at least 3 seconds while lamp time is being displayed. The reset menu will then appear. After you replace the lamp with a new lamp, select RESET on the menu with the button.
• Do not reset the lamp time unless you have replaced the lamp. And, always reset the lamp time when replacing the lamp.
• Before replacing the lamp, carefully read the descriptions headed "THE LAMP".
Refer to FILTER TIME: This function displays the total time the air-filter has been used since new.
Reset FILTER TIME [Use this function only when the filter is cleaned or replaced!]:
Depress the RESET button for at least 3 seconds while lamp time is being displayed. The reset menu will then appear. After you replace the filter, select
RESET on the menu with the button.
RESET ⇔ CANCEL
• Do not reset the filter time unless you have cleaned or replaced the filter. And, always reset the filter time when cleaning or replacing the filter. The message functions will not operate properly if the filter time is not reset correctly.
• Before cleaning or replacing the filter, carefully read the descriptions headed "THE AIR FILTER".
WIRELESS Menu
The WIRELESS menu is only enabled if the wireless function is enabled. Using the wireless function requires a Wireless & Network Module Terminal (sold separately). See the Wireless & Network Module Terminal user’s manual for more information about the
WIRELESS menu. Contact your local dealer for more information about the wireless function and Wireless & Network Module Terminal.
7
01CP-X885W/Vol2/E-3校 03.1.9 4:38 PM ページ 8
WHAT TO DO WHEN YOU THINK A MACHINE DEFECT HAS OCCURRED
Related Messages
When the unit's power is ON, messages such as those shown below may be displayed. When any such message is displayed on the screen, please respond as described below.
Message
CLEAN THE AIR FILTER
AFTER CLEANING AIR FILTER,
RESET THE FILTER TIMER.
Description
A note of precaution when cleaning the air filter.
After cleaning the filter, operate FILTER TIME of the OPTION
NO INPUT IS DETECTED
ON ***
SYNC IS OUT OF RANGE
ON *** fH ***** kHz fV ***** Hz
CHECK THE AIR FLOW
There is no input signal.
Please confirm the signal input connection, and the status of the signal source.
The horizontal or vertical wavelength of the inputted signal is outside of the response parameters of this unit. Please confirm the specs for this unit or the signal source specs.
The internal portion temperature is rising. Please turn the power
OFF, and allow the unit to cool down for approximately 20 minutes. After having confirmed the following items, then please resent the power to ON.
• Is there blockage of the air passage aperture?
• Is the air filter dirty?
• Does the peripheral temperature exceed 35°C?
8
01CP-X885W/Vol2/E-3校 03.1.9 4:38 PM ページ 9
Regarding the Indicator Lamps
Lighting and flashing of the POWER indicator, the LAMP indicator, and the
TEMP indicator have the meanings as described in the Table below.
Please respond in accordance with the instructions within the Table.
POWER indicator
LAMP indicator
TEMP indicator
Description
The orange lamp is lighted
Turned OFF
(Not lighted)
Turned OFF
(Not lighted)
The STANDBY mode is set
Flashing of the green lamp
The green lamp is lighted
Turned OFF Turned OFF The unit is warming up. Please wait.
Turned OFF Turned OFF The unit is in an ON state. Ordinary operations may be performed.
Flashing of the orange lamp
Blinking of the red lamp
The red lamp is lighted, or blinks
The red lamp is lighted, or blinks
The red lamp is lighted, or blinks
The red lamp is lighted, or blinks
The green lamp is lighted
The green lamp is lighted
Turned OFF Turned OFF The unit is cooling down. Please wait.
-
The unit is cooling down. Please wait.
A certain error has been detected. Wait until the POWER indicator lamp has finished flashing, and then perform the proper response measure using the item descriptions below as reference.
The red lamp is lighted
Turned
OFF
The lamp does not light.
There is a possibility that the interior portion has become heated. Turn the power OFF and wait approximately 20 minutes. After the main unit has cooled down, please confirm whether or not there is blockage of the air passage aperture, whether or not the filter is dirty, and/or whether or not the peripheral temperature exceeds 35°C, etc. After performing any needed maintenance, turn the power ON again; if the same display is displayed, then please change the lamp.
Blinking of the red lamp
Turned
OFF
Turned
OFF
Turned
OFF
Blinking of the red lamp
The red lamp is lighted
Alternative blinking with the red lamp
Either there is no lamp and/or lamp cover, or either of these has not been properly fixed
(attached). Turn the power OFF and wait approximately 45 minutes. After the main unit has sufficiently cooled down, please make confirmation of the attachment state of the lamp and lamp cover. After performing any needed maintenance, turn the power ON again; if the same display is displayed, then please contact a sales store or a service company.
The cooling fan is not operating. Turn the power OFF and wait approximately 20 minutes. After the main unit has cooled down, please make confirmation that no foreign matter has become caught in the fan, etc. After performing any needed maintenance, turn the power ON again; if the same display is displayed, then please contact a sales store or a service company.
There is a possibility that the interior portion has become heated. Turn the power OFF and wait approximately 20 minutes. After the main unit has cooled down, please confirm whether or not there is blockage of the air passage aperture, whether or not the filter is dirty, and/or whether or not the peripheral temperature exceeds 35°C, etc. After performing any needed maintenance, turn the power ON again; if the same display is displayed, then please contact a sales store or a service company.
There is a possibility that the interior portion has become overcooled. Please use the unit within the usage temperature parameters (0°C to 35°C). After performing any needed maintenance, turn the power ON again; if the same display is displayed, then please contact a sales store or a service company.
Simultaneous blinking with the red lamp
This is a notification that it is time to clean the filter.
After cleaning the filter, operate the FILTER TIME portion of the OPTION Menu, and perform reset of the FILTER TIME.
NOTE
When the interior portion has become overheated, for safety purposes, the power source is automatically turned OFF, and the indicator lamps may also be turned OFF. Press the “ ○ ” (power OFF) side of the main power switch, and wait for approximately 20 minutes. Please then use the unit only after having first confirmed that the unit has sufficiently cooled down.
01CP-X885W/Vol2/E-3校 03.1.9 4:38 PM ページ 10
WHAT TO DO WHEN YOU THINK A MACHINE DEFECT HAS OCCURRED (continued)
Phenomena That May Easily Be Mistaken for Machine Defects
Before requesting repair, check in accordance with the following chart.
If the situation cannot be corrected, then contact your dealer.
Phenomenon Cases not involving a machine defect Items to be confirmed
Reference
Page(s)
Power does not come ON
No sound or pictures are outputted
The main power source is not ON.
Turn on the main power.
The electrical power cord is not plugged in.
Correctly connect the power cord.
The main power source has been interrupted during operation, such as by a power outage (blackout), etc.
The input changeover settings are mismatched.
Be sure to press the “ O ” (power OFF) side of the main power switch, and leave this OFF for approximately 20 minutes. After the unit has sufficiently cooled down, turn ON the power source.
Select the input signal, and correct the settings.
No signal is being inputted.
Correctly connect the connection cord.
Vol.1-3, 15
Vol.1-15
Vol.1-16
Vol.1-8-12
Pictures are displayed, but no sounds are heard
The electrical wiring to this unit is not correctly connected.
The volume setting has been set at (or adjusted to) an extremely low level.
Correctly connect the connection cord.
Adjust the VOLUME setting to a higher level.
Vol.1-8-12
Vol.1-18
The MUTE mode is the current setting.
Press the MUTE button to release
(change) the MUTE mode setting.
Vol.1-18
Sounds are heard, but no pictures are displayed
The electrical wiring to this unit is not correctly connected.
The brightness setting has been set at
(or adjusted to) an extremely low level.
Correctly connect the connection cord.
Adjust the BRIGHT setting to a brighter level.
Vol.1-8-12
Vol.2-2
The lens cap has not been removed.
Remove the lens cap.
Vol.1-15
Colors have a fadedout appearance
Color tone is poor
Pictures appear dark
Pictures appear blurry
Input signal changes with no-operation.
Color depth setting or color tone setting
The brightness setting and/or contrast setting has not been properly adjusted.
Lamp is approaching the end of its product lifetime.
Either the FOCUS setting or the H
PHASE is not properly adjusted.
INPUT dial is set between the click points.
Perform picture adjustments by changing the
COLOR BAL R, the COLOR BAL B, and/or the
TINT settings, etc.
Perform picture adjustments by changing the
BRIGHT and/or CONTRAST settings, etc.
Exchange the old lamp with a new lamp.
Vol.2-3
Vol.2-2
Vol.1-27, 28
Adjust the FOCUS and H PHASE settings.
Vol.1-16
Vol.2-3
Turn the INPUT dial and set it at the click point.
Vol.1-16
10
NOTE
Although bright spots or dark spots may appear on the screen, this is a unique characteristic of liquid crystal displays, and such do not constitute or imply a machine defect.
01CP-X885W/Vol2/E-3校 03.1.9 4:38 PM ページ 11
SPECIFICATIONS
NOTE • This specifications are subject to change without notice.
Item
Product name
Panel size
Liquid crystal panel
Drive system
Pixels
Lens
Lamp
Speaker
Power supply
Power consumption
Temperature range
Size
Weight (mass)
Ports
Optional Parts
Specification
Liquid crystal projector
3.3 cm (1.3 type)
TFT active matrix
786,432 pixels (1024 horizontal x 768 vertical)
Zoom lens F=1.7 ~ 2.3 f=49 ~ 64 mm
150 W UHB
1.0W+1.0W (Stereo)
AC100 ~ 120V, 3.0A / AC220 ~ 240V, 1.4A
270W
0 ~ 35°C (Operating)
380 (W) x 120 (H) x 290 (D) mm (Not including protruding parts)
6.0 kg
RGB Input Ports
RGB ................................1
BNC (when RGB selected)
– (R.G.B.H.V) ..................1
DVI ..................................1
VIDEO Input Ports
VIDEO IN ........................1
S-VIDEO IN ....................1
COMPONENT VIDEO
– (C
R
/P
R
, C
B
/P
B
, Y) ........1
BNC
(when COMPONENT selected)
– (C
R
/P
R
, Y, C
B
/P
B
) ........1
Lamp: DT00571 Air Filter: NJ07081
* For others, consult your dealer.
AUDIO Ports
AUDIO IN 1 ....................1
AUDIO IN 2 ....................1
AUDIO IN (R, L) ..............1
RGB Output Port
RGB OUT........................1
AUDIO Output Port
AUDIO OUT ....................1
CONTROL Ports
CONTROL ......................1
USB ................................1
Other Ports
WIRELESS & NETWORK MODULE....1
REMOTE CONTROL ......1
Dimension Diagram
380
117
Unit : mm
11
11CP-X880/885W/TECHNICAl再校 03.1.9 4:42 PM ページ 1
SIGNAL CONNECTOR PIN ASSIGNMENT
RGB
RGB OUT
S-VIDEO
Pin No
1
2
3
4
6
7
8
D-sub 15-pin Shrink
Signal
Video input Red
Video input Green
Video input Blue
-
Ground Red
Ground Green
Ground Blue
Pin No
9
Signal
-
10 Ground
11
12
-
RGB IN: SDA (DDC)
RGB OUT : -
13 H. sync./ Composite sync.
14 Vertical sync
15
RGB IN : SCL (DDC)
RGB OUT : -
Mini Din 4-pin
Mini Din 4-pin
Pin No Signal
1
Color:
0.286Vp-p (NTSC, burst signal),
75 Ω terminator
0.3Vp-p (PAL/SECAM, burst signal),
75 Ω terminator
2
Brightness:
1.0Vp-p, 75 Ω terminator
3 Ground
4 Ground signal Terminal
RGB
RGB signal input
BNC (RGB)
(R,G,B,H,V)
DVI
AUDIO IN 1
AUDIO IN 2
VIDEO IN
S-VIDEO IN
Video signal input
COMPONENT VIDEO
(C
R
/P
R
, C
B
/P
B
, Y)
BNC (COMPONENT)
(C
R
/P
R
, C
B
/P
B
, Y)
AUDIO IN ( R , L )
Signal output
RGB OUT
Control functions
AUDIO OUT
CONTROL
USB
Specification
Video: RGB separate, Analog, 0.7Vp-p, 75 Ω terminator (positive)
H/V. sync.: TTL level (positive/negative)
Composite sync.: TTL level
D-sub 15-pin shrink jack
Video: RGB separate, Analog 0.7Vp-p, 75 Ω terminator (positive)
H/V. sync.: TTL level (positive/negative)
Composite sync.: TTL level
BNC connector x 5
TMDS, DC 150-1200 mV/AC 1.56 Vp-p, TTL Level (Positive/Negative)
DVI connector
200mVrms, 57 k
Ω
(max. 3.0Vp-p)
Stereo mini jack
1.0Vp-p, 75
Ω terminator, RCA jack
Brightness signal: 1.0Vp-p, 75 Ω terminator
Color signal: 0.286Vp-p (NTSC, burst signal),75 Ω terminator
Color signal: 0.300Vp-p (PAL/SECAM, burst signal),75 Ω terminator
Mini DIN 4-pin jack
Y signal: 1.0 Vp-p, 75 Ω terminator
C
R
/P
R signal: 0.7 Vp-p, 75 Ω terminator
C
B
/P
B signal: 0.7 Vp-p, 75 Ω terminator
RCA jack x 3 (BNC connector x 5)
200mVrms, 57 k
Ω
(max. 3.0Vp-p)
RCA jack
Video: RGB separate, Analog 0.7Vp-p, 75
Ω
(positive)
Sync.: H,V separate, TTL level (positive/negative)
Composite sync.: TTL level
D-sub 15-pin shrink jack
0~200mV(rms), output impedance 1k Ω (max. 3.0Vp-p)
Stereo mini jack
D-sub 15pin shrink plug
USB jack (B type)
1
11CP-X880/885W/TECHNICAl再校 03.1.9 4:42 PM ページ 2
2
EXAMPLE OF COMPUTER SIGNAL
fH (kHz)
48.1
46.9
53.7
49.7
48.4
56.5
60.0
68.7
67.5
37.9
31.5
35.0
37.9
37.5
43.3
35.2
37.9
60.0
64.0
80.0
91.2
75.0
Resolution
H
××
V
720
×
400
640
×
480
640 × 480
640 × 480
640
×
480
640
×
480
800
×
600
800 × 600
800
×
600
800
×
600
800
×
600
832
×
624
1024 × 768
1024
×
768
1024
×
768
1024
×
768
1152 × 864
1280 × 960
1280
×
1024
1280
×
1024
1280
×
1024
1600 × 1200 fV (Hz)
72.2
75.0
85.1
74.5
60.0
70.1
75.0
85.0
75.0
85.0
59.9
66.7
72.8
75.0
85.0
56.3
60.3
60.0
60.0
75.0
85.0
60.0
Rating
VESA
VESA
VESA
VESA
VESA
VESA
VESA
VESA
VESA
VESA
VESA
VESA
VESA
VESA
VESA
VESA
VESA
VESA
VESA
VESA
Signal mode
TEXT
VGA (60Hz)
Mac13"mode
VGA (72Hz)
VGA (75Hz)
VGA (85Hz)
SVGA (56Hz)
SVGA (60Hz)
SVGA (72Hz)
SVGA (75Hz)
SVGA (85Hz)
Mac16"mode
XGA (60Hz)
XGA (70Hz)
XGA (75Hz)
XGA (85Hz)
SXGA (75Hz)
SXGA (60Hz)
SXGA (60Hz)
SXGA (75Hz)
SXGA (85Hz)
UXGA (60Hz)
Display mode
Zoom in
Zoom in
Zoom in
Zoom in
Zoom in
Zoom in
Zoom in
Zoom in
Zoom in
Zoom in
Zoom in
Zoom in
Zoom out
Zoom out
Zoom out
Zoom out
Zoom out
Zoom out
NOTE • Some computers may have multiple display screen modes. Use of some of these modes will not be possible with this projector.
• Be sure to check jack type, signal level, timing and resolution before connecting this projector to a computer.
• Depending on the input signal, full-size display may not be possible in some cases.
Refer to the number of display pixels above.
• Although the projector can display signals (except DVI input) with resolution up to
UXGA (1,600 x 1,200), the signal will be converted to the projector’s panel resolution before being displayed. The best display performance will be achieved if the resolutions of the input signal and projector panel are identical.
• The image may not be displayed correctly when the input sync. signal is “Composite
Sync.” or “Sync. on G”.
• UXGA (1,600 x 1,200) signals cannot be displayed with DVI input.
11CP-X880/885W/TECHNICAl再校 03.1.9 4:42 PM ページ 3
INITIAL SET SIGNALS
The following signals are used for the initial settings.
The signal timing of some computer models may be different. In such case, refer to adjust the V.POSIT and H.POSIT of the menu.
DATA
HSYNC
Back porch b Front porch d
Display interval c
Sync a
DATA
VSYNC
Back porch b Front porch d
Display interval c
Sync a
Computer /
Signal
TEXT
VGA (60Hz)
Mac 13"mode
VGA (72Hz)
VGA (75Hz)
VGA (85Hz)
SVGA (56Hz)
SVGA (60Hz)
SVGA (72Hz)
SVGA (75Hz)
SVGA (85Hz)
Mac 16"mode
XGA (60Hz)
XGA (70Hz)
XGA (75Hz)
1.8
1.2
XGA (85Hz) 1.0
1152
×
864 (75Hz) 1.2
1280 × 960 (60Hz) 1.0
1280 × 1024 (60Hz) 1.0
1280 × 1024 (75Hz) 1.1
1280
×
1024 (85Hz) 1.0
1600
×
1200 (60Hz) 1.2
2.4
1.6
1.1
1.1
2.1
2.0
1.6
2.0
3.2
Horizontal signal timing (µs) a
2.0
b
3.0
c
20.3
d
1.0
3.8
2.1
1.3
1.6
3.2
3.8
25.4
21.2
20.3
0.6
2.1
0.5
3.8
2.2
3.6
2.2
20.3
17.8
22.2
20.0
0.5
1.6
0.7
1.0
1.3
3.2
2.7
3.9
2.5
1.9
2.2
2.2
2.4
2.9
2.3
1.8
1.4
1.9
16.0
16.2
14.2
14.5
15.8
13.7
13.0
10.8
10.7
11.9
11.9
9.5
8.1
9.9
0.3
0.2
0.5
0.6
0.9
1.1
0.3
0.6
0.6
0.4
0.4
0.1
0.4
0.4
Computer /
Signal
TEXT
VGA (60Hz)
Mac 13"mode
VGA (72Hz)
VGA (75Hz)
VGA (85Hz)
SVGA (56Hz)
SVGA (60Hz)
SVGA (72Hz)
SVGA (75Hz)
SVGA (85Hz)
Mac 16"mode
XGA (60Hz)
XGA (70Hz)
XGA (75Hz)
XGA (85Hz)
1152
×
864 (75Hz)
1280
×
960 (60Hz)
1280
×
1024 (60Hz)
1280
×
1024 (75Hz)
1280 × 1024 (85Hz)
1600
×
1200 (60Hz)
3
3
3
3
3
3
6
3
3
6
3
3
3
4
6
3
3
3
3
2
Vertical signal timimg (lines) a
3 b
42 c
400 d
1
2 25 480 2
39
20
16
25
22
480
480
480
480
600
1
1
3
1
1
23
23
21
27
39
29
29
28
36
600
600
600
600
624
768
768
768
768
3
1
1
3
1
1
37
1
1
32
36
864
960
38 1024
38 1024
44 1024
46 1200
1
1
1
1
1
1
3
11CP-X880/885W/TECHNICAl再校 03.1.9 4:42 PM ページ 4
CONNECTION TO THE MOUSE CONTROL
ADB Mouse
CONTROL Terminal
D-sub 15-pin shrink jack
1 2 3 4 5
6 7 8 9 10
11 12 13 14 15
Projector
DATA
RTS
+5V
GND
9
10
11
12
13
14
15
5
6
3
4
1
2
7
8
Computer
1
2
3
4
ADB
(POWER ON)
+5V
GND
Mouse jack
Mini DIN 4-pin
2
4 3
1
Serial Mouse
CONTROL Terminal
D-sub 15-pin shrink jack
1 2 3 4 5
6 7 8 9 10
11 12 13 14 15
Projector
SEL0
RTS
8
9
6
7
3
4
1
2
5
GND 10
11
TD
12
13
14
15
USB Mouse
USB jack
(B type)
2 1
3 4
Projector
+
5V 1
—DATA 2
+
DATA 3
GND 4
USB cable
8
9
6
7
3
4
1
2
5
Computer
CD
RD
TD
DTR
GND
DSR
RTS
CTS
RI
Computer
1 +
5V
2 —DATA
3
+
DATA
4 GND
Mouse jack
D-sub 9-pin
1
6
2
7
3 4
8 9
5
USB jack
(A type)
1 2 3 4
4
PS/2 Mouse
CONTROL Terminal
D-sub 15-pin shrink jack
1 2 3 4 5
6 7 8 9 10
11 12 13 14 15
Projector
CLK
DATA
SEL0
RTS
+5V
GND 10
11
6
7
4
5
8
9
1
2
3
12
13
14
15
Computer
4
5
6
1
2
3
DATA
GND
+5V
CLK
Mouse jack
Mini DIN 6-pin
4
6
2 1
5
3
11CP-X880/885W/TECHNICAl再校 03.1.9 4:42 PM ページ 5
RS-232C COMMUNICATION
(1) Turn off the projector and computer power supplies, and connect with the RS-232C adapter via the RS-232C cable.
(2) Turn on the computer power supply and after the computer has started up, turn on the projector power supply.
Control jack
D-sub 15-pin shrink jack
Projector
SELO
RTS 7
8
9
GND 10
11
12
4
5
6
1
2
3
RD 13
TD 14
15
RS-232C adapter
Computer
CD
RD
TD
DTR
GND
DSR
RTS
DTS
RI
4
5
6
1
2
3
7
8
9
RS-232C jack
D-sub 9-pin
1
6
2 3
7 8
4
9
5
Communications setting
19200bps, 8N1
1 Protocol
Consist of header (7 bytes) + command data (6 bytes).
2 Header
BE + EF + 03 + 06 + 00 + CRC_low + CRC_high
CRC_low : Lower byte of CRC flag for command data.
CRC_high : Upper byte of CRC flag for command data.
3 Command data byte_0
Action byte_1 low high
Command data chart byte_2 byte_3
Type low high byte_4 byte_5
Setting code low high
Action
1
2
4
5
6
Classification
SET
GET
INCREMENT
Action (byte_0 - 1)
Content
Change setting to desired value.
Read projector internal setup value.
Increment setup value by 1.
DECREMENT
EXECUTE
Decrement setup value by 1.
Run a command.
5
11CP-X880/885W/TECHNICAl再校 03.1.9 4:42 PM ページ 6
6
RS-232C COMMUNICATION (continued)
Requesting projector status (Get command)
(1) Send the request code Header + Command data (‘02H’+‘00H’+ type (2 bytes)
+‘00H’+‘00H’) from the computer to the projector.
(2) The projector returns the response code ‘1DH’+ data (2 bytes) to the computer.
Changing the projector settings (Set command)
(1) Send the setting code Header + Command data (‘01H’+‘00H’+ type (2 bytes) + setting code (2 bytes)) from the computer to the projector.
(2) The projector changes the setting based on the above setting code.
(3) The projector returns the response code ‘06H’ to the computer.
Using the projector default settings (Reset Command)
(1) The computer sends the default setting code Header + Command data (‘06H’+‘00H’+ type (2 bytes) +‘00H’+‘00H’) to the projector.
(2) The projector changes the specified setting to the default value.
(3) The projector returns the response code ‘06H’ to the computer.
Increasing the projector setting value (Increment command)
(1) The computer sends the increment code Header + Command data (‘04H’+‘00H’+ type (2 bytes) +‘00H’+‘00H’) to the projector.
(2) The projector in creases the setting value on the above setting code.
(3) The projector returns the response code ‘06H’ to the computer.
Decreasing the projector setting value (Decrement command)
(1) The computer sends the decrement code Header + Command data (‘05H’+‘00H’+ type (2 bytes) +‘00H’ + ‘00H’) to the projector.
(2) The projector decreases the setting value on the above setting code.
(3) The projector returns the response code ‘06H’ to the computer.
When a command sent by the projector cannot be understood by the computer
When the command sent by the projector cannot be understood, the error command ‘15H’ is returned by the computer. Some times, the projector ignores RS-232C commands during other works. If the error command ‘15H’ is returned, please send the same command again.
When data sent by the projector cannot be practice
When the command sent by the projector cannot be practiced, the the error code ‘1cH’
+‘xxxxH’ is returned.
When the data length is greater than indicated by the data length code, the projector will ignore the excess data code.
Conversely, when the data length is shorter than indicated by the data length code, an error code will be returned to the projector.
NOTE • Operation cannot be guaranteed when the projector receives an undefined command or data.
• Provide an interval of at least 40ms between the response code and any other code.
• The projector outputs test data when the power supply is switched ON, and when the lamp is lit. Ignore this data.
• Commands are not accepted during warm-up.
11CP-X880/885W/TECHNICAl再校 03.1.9 4:42 PM ページ 7
Command data chart
Names
Blank Color
Mirror
Freeze
Startup
Language
Magnify
Auto off
Brightness Reset
Contrast Reset
V.Position Reset
Operation type
Set
Set
Set
Set
Set
Blue
White
Black
MyScreen
ORIGNAL
Get
Normal
H Inverse
V lnverse
H&V Inverse
Get
Normal
Freeze
Get
ORIGNAL
OFF
MyScreen
Get
English
Français
Deutsch
Español
Italiano
Norsk
Nederlands
Português
日本語
中文
Get
Get
Increment
Decrement
Get
Increment
Decrement
Execute
Execute
Execute
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
Header
CRC Action
Command data
Type
03 06 00 CB D3 01 00 00 30
03 06 00 6B D0 01 00 00 30
03 06 00 9B D0 01 00 00 30
03 06 00 FB CA 01 00 00 30
Setting code
03 00
05 00
06 00
20 00
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
03 06 00 FB E2 01 00 00 30
03 06 00 08 D3 02 00 00 30
03 06 00 C7 D2 01 00 01 30
03 06 00 57 D3 01 00 01 30
03 06 00 A7 D3 01 00 01 30
03 06 00 37 D2 01 00 01 30
03 06 00 F4 D2 02 00 01 30
03 06 00 83 D2 01 00 02 30
03 06 00 13 D3 01 00 02 30
03 06 00 B0 D2 02 00 02 30
03 06 00 0B D2 01 00 04 30
03 06 00 9B D3 01 00 04 30
03 06 00 CB CB 01 00 04 30
03 06 00 38 D2 02 00 04 30
03 06 00 F7 D3 01 00 05 30
03 06 00 67 D2 01 00 05 30
03 06 00 97 D2 01 00 05 30
03 06 00 07 D3 01 00 05 30
03 06 00 37 D1 01 00 05 30
03 06 00 A7 D0 01 00 05 30
03 06 00 57 D0 01 00 05 30
03 06 00 C7 D1 01 00 05 30
03 06 00 37 D4 01 00 05 30
03 06 00 A7 D5 01 00 05 30 09 00
40 00
00 00
00 00
01 00
02 00
03 00
00 00
00 00
01 00
00 00
00 00
01 00
20 00
00 00
00 00
01 00
02 00
03 00
04 00
05 00
06 00
07 00
08 00
BE EF
03
03
03
03
03 06 00 57 D5 01 00 05 30
03 06 00 C4 D3 02 00 05 30
03 06 00 7C D2 02 00 07 30
03
06 00 1A D2 04 00 07 30
06 00 CB D3 05 00 07 30
06 00 08 86 02 00 10 31
06 00 6E 86 04 00 10 31
06 00 BF 87 05 00 10 31
0A 00
00 00
00 00
00 00
00 00
00 00
00 00
00 00
BE EF
BE EF
03
03
06 00 58 D3 06 00 00 70
06 00 A4 D2 06 00 01 70
00 00
00 00
BE EF 03 06 00 E0 D2 06 00 02 70 00 00
7
11CP-X880/885W/TECHNICAl再校 03.1.9 4:43 PM ページ 8
Command data chart (continued)
8
Names
H.Position Reset
H.Size Reset
Color Balance
R Reset
Color Balance
B Reset
Sharpness Reset
Color Reset
Tint Reset
Keystone_V Reset
Keystone_H Reset
Auto Adjust
Auto Keystone_V
Lamp Time Reset
Filter Time Reset
Blank on/off
Error Status
Power
Input Source
Volume
Mute
Brightness
Contrast
Color Balance R
Operation type
Execute
Execute
Execute
BE EF
BE EF
BE EF
Header
03
03
Command data
CRC Action Type Setting code
06 00 IC D3 06 00 03 70
06 00 68 D2 06 00 04 70
00 00
00 00
03 06 00 94 D3 06 00 05 70 00 00
Execute BE EF 03 06 00 D0 D3 06 00 06 70 00 00
Set
Execute
Execute
Execute
Execute
Execute
Execute
Execute
Execute
Execute
Get off on
Set
Set
Get
Get
Set
Increment
Decrement
Normal
Mute
Get
Get
Increment
Decrement
Get
Increment
Decrement
Get
Increment
Decrement
OFF
ON
Get
BE EF
BE EF
BE EF
RGB BE EF
BNC ( RGB) BE EF
Video BE EF
S-Video BE EF
Component BE EF
DVI BE EF
BNC (Component) BE EF
Get BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
03
03
03
03
03
03
03
03
03
06 00 C4 D0 06 00 09 70
06 00 80 D0 06 00 0A 70
06 00 7C D1 06 00 0B 70
06 00 08 D0 06 00 0C 70
06 00 98 D8 06 00 20 70
06 00 91 D0 06 00 0A 20
06 00 E5 D1 06 00 0D 20
06 00 58 DC 06 00 30 70
06 00 98 C6 06 00 40 70
BE EF
BE EF
BE EF
BE EF
03
03
03
03
06 00 FB D8 01 00 20 30
06 00 6B D9 01 00 20 30
06 00 C8 D8 02 00 20 30
06 00 D9 D8 02 00 20 60
(Example of Return)
00 00 01 00 02 00 03 00
(Normal) (Cover-error) (Fan-error) (Lamp-error)
04 00 05 00 06 00 07 00 08 00
(Temp-error) (Air flow-error) (Lamp-Time-over) (Cool-error) (Filter-Error)
00 00
00 00
00 00
00 00
00 00
00 00
00 00
00 00
00 00
00 00
01 00
00 00
00 00
03
03
03
03
06 00
06 00
06 00
06 00
2A D3
BA D2
19 D3
FE D2
01 00
01 00
02 00
01 00
00 60
00 60
00 60
00 20
03 06 00 3E D0 01 00 00 20
03 06 00 6E D3 01 00 00 20
03 06 00 9E D3 01 00 00 20
03 06 00 AE D1 01 00 00 20
03 06 00 0E D2 01 00 00 20
03 06 00 5E D1 01 00 00 20
03 06 00 CD D2 02 00 00 20
03
03 06 00 57 D3 04 00 01 20
03 06 00 86 D2 05 00 01 20
03 06 00 46 D3 01 00 02 20
03 06 00 D6 D2 01 00 02 20
03 06 00 75 D3 02 00 02 20
03 06 00 89 D2 02 00 03 20
03 06 00 EF D2 04 00 03 20
03 06 00 3E D3 05 00 03 20
03 06 00 FD D3 02 00 04 20
03 06 00 9B D3 04 00 04 20
03 06 00 4A D2 05 00 04 20
03 06 00 01 D2 02 00 05 20
03
03
06 00
06 00
06 00
31 D3
67 D2
B6 D3
02 00
04 00
05 00
01 20
05 20
05 20
00 00
00 00
00 00
00 00
01 00
00 00
00 00
00 00
00 00
00 00
00 00
00 00
00 00
00 00
00 00
00 00
01 00
00 00
00 00
04 00
01 00
02 00
05 00
03 00
06 00
00 00
11CP-X880/885W/TECHNICAl再校 03.1.9 4:43 PM ページ 9
Names
Color Balance B
Keystone_V
Keystone_H
Aspect
Picture
Position at
16 : 9 or Small
V.Position
H.Position
H.Size
H.Phase
Sharpness
Color
Tint
BNC
Video Format
HDTV
Operation type
Set
Set
Get
Increment
Decrement
Get
Increment
Decrement
Get
Increment
Decrement
4:3
16:9
Small
Get
Default
Bottom
Top
Get
Get
Increment
Decrement
Get
Increment
Decrement
Get
Increment
Decrement
Get
Increment
Decrement
Get
Increment
Decrement
Set
Get
Increment
Decrement
Get
Increment
Decrement
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
RGB BE EF
Component BE EF
Get BE EF
Set
Set
Auto
NTSC
PAL
SECAM
BE EF
BE EF
BE EF
BE EF
NTSC 4.43
BE EF
M-PAL BE EF
N-PAL
Get
BE EF
BE EF
1080i
1035i
Get
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
Command data
Header
CRC Action Type Setting code
03 06 00 45 D2 02 00 06 20
03 06 00 23 D2 04 00 06 20
03 06 00 F2 D3 05 00 06 20
03 06 00 B9 D3 02 00 07 20
03 06 00 DF D3 04 00 07 20
03 06 00 0E D2 05 00 07 20
03 06 00 E9 D0 02 00 0B 20
03 06 00 8F D0 04 00 0B 20
03 06 00 5E D1 05 00 0B 20
03 06 00 9E D0 01 00 08 20
03 06 00 0E D1 01 00 08 20
03 06 00 FE D1 01 00 08 20
03 06 00 AD D0 02 00 08 20
03 06 00 62 D1 01 00 09 20
03 06 00 F2 D0 01 00 09 20
03 06 00 02 D0 01 00 09 20
03 06 00 51 D1 02 00 09 20
03 06 00 0D 83 02 00 00 21
03 06 00 6B 83 04 00 00 21
03 06 00 BA 82 05 00 00 21
03 06 00 F1 82 02 00 01 21
03 06 00 97 82 04 00 01 21
03 06 00 46 83 05 00 01 21
03 06 00 B5 82 02 00 02 21
03 06 00 D3 82 04 00 02 21
03 06 00 02 83 05 00 02 21
03 06 00 49 83 02 00 03 21
03 06 00 2F 83 04 00 03 21
03 06 00 FE 82 05 00 03 21
03 06 00 F1 72 02 00 01 22
03 06 00 97 72 04 00 01 22
03 06 00 46 73 05 00 01 22
03 06 00 B5 72 02 00 02 22
03 06 00 D3 72 04 00 02 22
03 06 00 02 73 05 00 02 22
03 06 00 49 73 02 00 03 22
03 06 00 2F 73 04 00 03 22
03 06 00 FE 72 05 00 03 22
03 06 00 C2 D7 01 00 11 20
03 06 00 52 D6 01 00 11 20
03 06 00 F1 D7 02 00 11 20
03 06 00 9E 75 01 00 00 22
03 06 00 FE 71 01 00 00 22
03 06 00 6E 70 01 00 00 22
03 06 00 6E 75 01 00 00 22
03 06 00 5E 72 01 00 00 22
03 06 00 FE 74 01 00 00 22
03 06 00 0E 71 01 00 00 22
03 06 00 0D 73 02 00 00 22
03 06 00 F2 73 01 00 05 22
03 06 00 62 72 01 00 05 22
03 06 00 C1 73 02 00 05 22
00 00
00 00
00 00
00 00
00 00
00 00
00 00
01 00
00 00
0A 00
04 00
05 00
09 00
02 00
08 00
07 00
00 00
00 00
01 00
00 00
00 00
00 00
00 00
00 00
00 00
00 00
00 00
00 00
00 00
00 00
00 00
00 00
00 00
00 00
00 00
00 00
00 00
00 00
00 00
01 00
02 00
00 00
00 00
01 00
02 00
00 00
00 00
00 00
00 00
00 00
00 00
00 00
9
11CP-X880/885W/TECHNICAl再校 03.1.9 4:43 PM ページ 10
10
Command data chart (continued)
Names
Sync on G
PinP Size
PinP Position
PinP Audio ch
PinP Input
GAMMA
Over Scan
MyScreen Size
MyScreen Lock
Lamp Time
Filter Time
IR Remote Front
IR Remote Rear
IR Remote Top
Operation type
Set
Set
Set
Set
Set off on
Get off
Large
Small
Get
Upper left
Upper right
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
Bottom left BE EF
Bottom right BE EF
Get BE EF
RGB
Video
Get
Video
S-Video
Get
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
Command data
Header
CRC Action Type Setting code
03 06 00 CB D0 01 00 08 30
03 06 00 5B D1 01 00 08 30
03 06 00 68 D1 02 00 08 30
03 06 00 FE 22 01 00 00 23
03 06 00 6E 23 01 00 00 23
03 06 00 9E 23 01 00 00 23
03 06 00 CD 22 02 00 00 23
03 06 00 02 23 01 00 01 23
03 06 00 92 22 01 00 01 23
03 06 00 62 22 01 00 01 23
03 06 00 F2 23 01 00 01 23
03 06 00 31 23 02 00 01 23
03 06 00 BA 22 01 00 03 23
03 06 00 2A 23 01 00 03 23
03 06 00 89 22 02 00 03 23
03 06 00 D6 22 01 00 02 23
03 06 00 26 22 01 00 02 23
03 06 00 75 23 02 00 02 23
00 00
01 00
00 00
01 00
02 00
00 00
01 00
00 00
00 00
00 00
01 00
02 00
00 00
00 00
01 00
02 00
03 00
00 00
Set
Set
Set
Set
Small
Get
Full
Get
X1 off on
Get
Get
NORMAL
CINEMA
BE EF
BE EF
DYNAMIC BE EF
Get
Large
Middle
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
Get BE EF
03 06 00 C7 F0 01 00 A1 30
03 06 00 57 F1 01 00 A1 30
03 06 00 A7 F1 01 00 A1 30
03 06 00 F4 F0 02 00 A1 30
03 06 00 C2 71 01 00 09 22
03 06 00 32 71 01 00 09 22
03 06 00 A2 70 01 00 09 22
03 06 00 91 70 02 00 09 22
03 06 00 43 D6 01 00 12 30
03 06 00 D3 D7 01 00 12 30
03 06 00 70 D6 02 00 12 30
03 06 00 3B EF 01 00 C0 30
03 06 00 AB EE 01 00 C0 30
03 06 00 08 EF 02 00 C0 30
03 06 00 C2 FF 02 00 90 10
03 06 00 C2 F0 02 00 A0 10
00 00
01 00
02 00
00 00
02 00
01 00
00 00
00 00
00 00
01 00
00 00
00 00
01 00
00 00
00 00
00 00
Set
Set
Set
Get
Get off on
Get off on off on
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
BE EF
03
03
03
03
06 00
06 00
06 00
06 00
FF 32
6F 33
CC 32
74 33
01 00
01 00
02 00
02 00
00 26
00 26
00 26
03 06 00 03 33 01 00 01 26
03 06 00 93 32 01 00 01 26
03 06 00 30 33 02 00 01 26
03 06 00 47 33 01 00 02 26
03 06 00 D7 32 01 00 02 26
02 26
00 00
01 00
00 00
00 00
01 00
00 00
00 00
01 00
00 00
LEGAL INFORMATION
FIVE-YEAR LIMITED WARRANTY
This Dukane LCD projector is warranted to the original purchaser for a period of five (5) years from the original purchase date - in normal use and service against defects in material and workmanship. DUKANE CORPORATION
EXPRESSLY DISCLAIMS ALL OTHER WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE.
During the warranty period, Dukane Corporation will repair or replace (at the manufacturer's option) any such defective parts (except for the lamp, which is subject to whatever warranties the manufacturer may provide) without charge to the purchaser for parts or labor when the product is returned, prepaid and insured, with proof-of-purchase date. This remedy is void if the product has been damaged by accident, unreasonable use, neglect, improper service or other causes not arising out of defects in material or workmanship.
Dukane Corporation disclaims all liability for incidental or consequential damage of any kind, including all damages arising out of any interruptions in operation of the product and all damages to software.
No person, firm, or representative is authorized to assume any obligation or to make any warranty on behalf of the Dukane Corporation other than as stated above.
THIS LIMITED WARRANTY IS VALID FOR U.S.A AND CANADA.
FOR OTHER LOCATIONS, LOCAL WARRANTIES APPLY.
LAMP REPLACEMENT SERVICE & REPAIR POLICY & PROCEDURE
For service and parts, contact the Dukane AV Service Department at 1 (800) 676-2487 within the USA or 1 (630) 584-2300 worldwide.
If you would like to send a facsimile (FAX), dial 1 (630) 584-5156 worldwide.
When requesting warranty service, please have the sales receipt available along with the model name and serial number.
If it becomes necessary to return the projector, use the original packing material and box (if retained) or pack securely. Dukane Corporation will not be liable for any pick-up or delivery charges or any expenses incurred for service calls or service supplied by anyone other than the Dukane AV Service Department.
Dukane Corporation
Audio Visual Products Division
2900 Dukane Drive
St. Charles, IL 60174-3395
E-mail: [email protected]
Phone: (630) 762-4040
Orders: (800) 676-2485
Information: (800) 676-2486
Fax: (630) 584-5156
Parts & Service: (800) 676-2487
Fax: (630) 584-0984
Audio Visual Products
Part # 401-603-00
advertisement
Related manuals
advertisement
Table of contents
- 10 PROJECTOR FEATURES
- 10 PREPARATIONS
- 12 PART NAMES
- 14 THE PROJECTOR
- 16 YOUR DEVICES
- 21 CONTROL
- 23 TURNING ON THE POWER
- 25 TURNING OFF THE POWER
- 26 ADJUSTING THE VOLUME
- 26 THE SOUND
- 27 ADJUSTING THE POSITION
- 28 ADJUSTMENT FEATURE
- 29 DISTORTIONS
- 30 FEATURE
- 30 FREEZING THE SCREEN
- 31 ONE-TOUCH
- 32 RATIO
- 32 THE SCREEN
- 32 (P. IN. P: Picture in Picture)
- 33 FUNCTIONS
- 34 OPERATING THE PC SCREEN
- 35 THE LAMP
- 37 THE AIR FILTER
- 39 OTHER CARE
- 51 – (R.G.B.H.V)
- 51 VIDEO IN
- 51 S-VIDEO IN
- 51 AUDIO IN
- 51 AUDIO IN (R, L)
- 51 RGB OUT
- 51 AUDIO OUT
- 51 CONTROL
- 51 REMOTE CONTROL