42-Inch PDP Display Service Manual for Model GTW

CONFIDENTIAL

PDP-014-1 (Module Format)

Issued:June.20.2003

Version:1.0

42“ PDP

SERVICE MANUAL

MODEL：

GTW-P42M203

Panel:Samsung (VVEPP42SD001F--)

CONTENTS

1. IMPORTANT SAFETY PRECAUTIONS ……..1-2

2. SPECIFICATION …………………………….…2-9

3. FACTORY & ELECTRONIC ADJUSTMENT ..3-7

4. BLOCK DIAGRAM ……………………………..4-6

5. TROUBLE SHOOTING GUIDES …………….5-6

6. B.O.M OF BOARD ASSEMBLY…………..…….6-23

7. P.C.BOARD TOP VIEW………….…..………….7-8

8. ELECTRONIC MODULE LIST ………………….8-1

9. EXPLODED VIEW…………. ………………….9-1

10.PACKAGING OF THE LIST …………………..10-1

IMPORTANT SAFETY PRECAUTIONS VER1.0

1. Before returning an instrument to the customer, always make a safety check of the entire instrument, including, but not limited to, the following items.

a. Be sure that no built-in protective devices are defective and/or have been defeated during servicing. (1)

Protective shields are provided on this chassis to protect both the technician and the customer. Correctly replace all missing protective shields, including any removed for servicing convenience. (2) When reinstalling the chassis and/or other assembly in the cabinet, be sure to put back in place all protective devices, including, but not limited to, nonmetallic control knobs, insulating fish papers, adjustment and compartment covers/shields, and isolation resistor/capacitor networks. Do not operate this instrument

or permit it to be operated without all protective devices correctly installed and functioning.

b. Be sure that there are no cabinet openings through which an adult or child might be able to insert their fingers into, Such opening include, but are not limited to, (1) spacing between the picture tube and the cabinet mask, (2) excessively wide cabinet ventilation slots, and (3) an improperly fitted and/or incorrectly secured cabinet back cover. a 120V AC outlet. (Do not use an isolation transformer during this test.) Use a leakage current tester or a metering system that complies with American National Standards Institutes (ANSI) C101.1 Leakage

Current for Appliances and Underwriters Laboratories (UL) 478. With the instrument AC switch first in the

ON position and then in the OFF position, measure from a known earth ground (metal water pipe, conduit, etc.) to all exposed metal parts of the instrument (antennas, handle bracket, metal cabinet, screw heads, metallic overlays, control shafts, etc.), especially any exposed metal parts that offer an electrical return path to the chassis. Any current measured must not exceed 3.5 milliamp. Reverse the instrument power cord plug in the outlet and repeat test. ANY MEASUREMENTS NOT WITHIN THE LIMITS SPECIFIED

HEREIN INDICATE A POTENTIAL SHOCK HAZARD THAT MUST BE ELIMINATED BEFORE

RETURNING THE INSTRUMENT TO THE CUSTOMER.

AC Leakage Test

DEVICE

UNDER

TEST

TEST ALL

EXPOSED METAL

SURFACES

3. WIRE CORD

ALSO TEST WITH

PLUG REVERSED

(USING AC ADAPTER

PLUG AS REQUIRED)

LEAKAGE

CURRENT

TESTER

+ -

(READING

SHOULD NOT

BE ABOVE

3.5mA)

EARTH

GROUND

2. Read and comply with all caution and safety-related notes on or inside the Monitor cabinet. alterations and additions, including, but not limited to, circuit modifications and the addition of the items such as auxiliary audio and/or video output connections might alter the safety characteristics of this

Monitor and create a hazard to the user. Any design alterations or additions will void the manufacturer’s warranty and will make you, the service, responsible for personal injury or property damage resulting there from.

1-1

IMPORTANT SAFETY PRECAUTIONS VER1.0

conductor of the AC power cord. They may be safely serviced without an isolation transformer only if the

AC power plug is inserted so that the chassis is connected to the groundside of the AC power source. To confirm that the AC power plug is inserted correctly use an AC voltmeter to measure the voltage potential between the chassis and a known earth ground. If the voltage reading is greater than 1.0V, remove and reinsert the AC power plug in opposite polarity and re-measure the voltage potential between the chassis and a known earth ground. b. Certain Monitor chasses have 85V AC (RMS) between chassis and earth ground regardless of the AC plug polarity. These chasses can be safely serviced only with an isolation transformer inserted in the power line between the receiver and the AC power source, for both personnel and test equipment protection. c. Some Monitor chasses have a secondary ground systems in addition to the main chassis ground. This secondary ground system is not isolated from the AC power line. The two ground systems are electrically separated by insulating material that must not be defeated or altered.

5. Observe original lead dress. Take extra care to assure correct lead dress in the following areas: a. near sharp edges, b. near thermally hot parts—be sure that leads and components do not touch thermally hot parts, c. the AC supply, d. high voltage, e. antenna wiring. Inspect in all areas for pinched, out-of-place, or frayed wiring. Do not change the spacing between components or the spacing between the printed-circuit board and components. Last but not least, visually check the AC power cord to ensure no outer appearance damage is present.

6. Components, parts, and/or wiring that appear to have overheated or are otherwise damaged should be replaced with components, parts, or wiring that meet original specifications. Additionally, determine the cause of overheating and/or damage and, if necessary, take corrective action to remove any potential safety hazard(s). characteristics some of which are often not evident from visual inspection, nor can the protection they give necessarily be obtained by replacing them with components rated for higher voltage, wattage, etc. Parts that have special safety characteristics are identified in this service data by shading with a mark on schematics and by shading or a ＊ mark in the parts list. Use of a replacement part that does not have the same safety characteristics as the recommended replacement part in the Service data parts list might create shock, fire, and/or other hazards.

1-2

SPECIFICATION VER1.0

1. SCOPE:

These specifications describe all the characteristics of the 42 inch color monitor. a. Screen size b. Aspect ratio c. Number of pixels d. Pixel Pitch e. Luminance f. Chromatically a. Input voltage b. Input current c. Inrush current d. Power consumption e. Stand-by & DPMS

Specification

Diagonal 42 inch

16:9 wide

852(Horizontal, RGB Trio ) X 480(Vertical)pixels

1.08mm X 1.08mm

570cd/m

2

,at APL13% x=0.270

±±±±

0.03, y=0.300

±±±±

0.03(color temperature mode 1 : ) at center block white pattern 100% (mosaic).

100 ~ 240 Vac , 50 / 60 Hz

3.3A

60 A p-p/20ms Max.

380

±±±±

10% Watts ( at 110Vac/color bar pattern)

5 Watts Max. (at 110Vac)

2.3.1 Connector Type:

RCA Jack for audio, video Y/C

B

/C

R

and Y/P

B

/P

R

6 pin Din S-terminal

9 pin D-SUB

15 pin D-SUB

24 pin DVI

2.3.2 Video/S-Video Signal: a. Type b. Polarity c. Amplitude d. Frequency e. Input impedance

2.3.3 Y/CB/CR or Y/PB/PR Signal: a. Type b. Polarity c. Amplitude d. Frequency

Y/C

B

/C

R

Y/P

B

/P

R

:HDTV

Analog

Positive

Video 1Vp-p , (priority S-Video) Y=1Vp-p C=0.286Vp-p

H: 15.734KHz V: 60Hz(NTSC)

H: 15.625KHz V: 50Hz(PAL)

75 ohms

Analog

Positive

AV: 1Vp-p (with sync)

S-Video: Y: 1Vp-p ,C: 0.286Vp-p

H: 15.734KHz ,V: 60Hz (NTSC)

H: 15.625KHz ,V: 50Hz (PAL)

33KHz/60Hz(1080I)

2-1


2.3.4 RGB Signal: a. Type b. Polarity c. Amplitude d. Frequency

TTL

Positive or Negative

RGB: 0.7Vp-p

H: support to 31K~91KHz

V: support to 50~85Hz

2.3.5 DVI Signal: a. Type b. Polarity c. Frequency

2.3.6 Audio Signal:

Digital

Positive or Negative

H: support to 31K~63KHz

V: support to 50~85Hz

Analog 500mV rms /more than 22Kohm

2.3.7 Pin Assignments For D-SUB Connector (In / Loop Out):

Pin Signal Assignment Pin Signal Assignment Pin Signal Assignment

1 RED 11 GND

2 GREEN

3 BLUE

12 SDA

13 H-SYNC

4 GND

5 GND

9 NC

10 GND

14 V-SYNC

15 SCL

2.3.8 Pin Assignments For 24 Pin DVI Connector(Digital Only):

Pin Signal Assignment Pin Signal Assignment Pin Signal Assignment

1 TMDS Data 2- 9 TMDS Data 1- 17 TMDS Data 0-

2 TMDS Data 2+

3 TMDS Data 2/4

10

11

TMDS Data 1+

TMDS Data 1/3 Shield

18

19

TMDS Data 0+

TMDS Data 0/5 Shield

Shield

4 TMDS Data 4-

5 TMDS Data 4+

6 DDC Clock

12

13

14

TMDS Data 3-

TMDS Data 3+

+5V Power

15 Ground (For +5V)

20

21

22

23

TMDS Data 5-

TMDS Data 5+

TMDS Clock Shield

TMDS Clock + 7 DDC Data

8 No Connect 16 Hot Plug Detect 24 TMDS Clock -

2-2

8

9

10

11

12

13

14

5

6

7

1

2

3

4


2.3.9 RGB/DVI For VESA Standard:

Mode No Resolution

Refresh

Rate

Horizontal

Frequency

Vertical

Frequency

Vertical

Sync

Polarity

Horizontal

Sync

Polarity

Dot rate

(Hz) (Hz)

60 31.5 - 25.175

72 37.9 - 31.500

75 37.5 75 - - 31.500

85 43.3 - 36.000

75 46.9 75 + + 49.500

60 48.4 - 65.000

70 56.5 - 75.000

18

19

22

23

60 63.98 + 108.00

75 79.98 + 135.00

85 91.15 + 157.50

70 31.50 70 - - 25.175

50 31.5 50 - - 25.175

60 45.15 60 - - 74.250

60(I) 33.78 60 - - 74.250

70 31.46 - 28.320

60 31.72 - 34.00

24

25

26

RGB/DVI For Apple Standard.


832 x 624

1152 x 870

Refresh

Rate

Horizontal

Frequency

Vertical

Frequency

Vertical

Sync

Polarity

Horizontal

Sync

Polarity

Dot rate

(Hz) (Hz)

75 68.85 - 57.283

75

75

49.73

68.68

74.55

75.06

-

-

-

-

57.283

100.000

2.3.10 Y/PB/PR For Component:


1

2

3

Refresh Rate

60

60

60

2-3


2.4. Display Performance Requirements:

The data of display performance are measured based on the following.

Conditions unless otherwise specified. a. Ambient temperature b. Warm up period c. Line input voltage : d. Viewing distance e. Display mode f. Brightness condition

25

±±±±

5 ℃

30 minutes Min.

100 Vac ~ 240 Vac (50 / 60 Hz)

Distance from screen is 81 cm

Test with window white pattern mode if not specified.

Press recall bottom to set default brightness

2.4.1 Maximum Resolution: Support to 1280 x 1024

2.4.2 Horizontal Size (Standard)

Vertical Size (Standard)

920

±±±±

8 mm (for mode 1〜

518

±±±±

8 mm (for mode 1〜

2.4.3 Horizontal Size (Max.)

Vertical Size (Max.)

2.4.4 Maximum Brightness Level: Timing Mode 1 a. 100% center block white pattern(mosaic) b. raster background

2.5. Operation:

More than 30FL

(while pressing recall button to set default brightness) with contrast / brightness at Max. and black signal) less than 0.4FL

Main unit button

Main power switch (power ON /OFF)

Power ON/OFF

Input Mode (Video1 -> S-Video1 -> Video2 or S-Video2 ->

IR Remote Control

Y/P

B

/P

R

1 or Y/C

B

/C

R

1 -> Y/P

B

/P

R

1 or Y/C

B

/C

R

1 -> RGB ->

DVI->Video1 run in circle)

Menu key -,+ Adjustment -,+

Power on/off

Input Mode (same as Main unit button)

Volume -,+ Wide , Video/S video input:4:3/16:9/ZOOM1/ZOOM2

Analog RGB input :W4:3/W16:9

Menu -,+ Adjustment -,+ RECALL

PIP ,POP ,SWAP ,MUTE

2.5.1 Adjustable Items:

AV/S-video input Brightness, Contrast, Color , Tint, Sharpness

Analog RGB input

DVI input

Display position :

Brightness, Contrast, Vertical position, Vertical width,

Horizontal position, Horizontal width, Color Temperature

Clock phase, DPMS.

Brightness, Contrast, Vertical position, Vertical width,

Horizontal position, Horizontal width, Color Temperature,

DPMS

2-4


3. DIMENSIONS:

Width

Height

Depth

Without/Stand

1040mm

648 mm

95mm

With/Stand

1040mm

690mm

375 mm

3.2. Weight:

Net weight

Gross weight

4. ENVIRONMENT:

79.4lbs/36 Kgs (w/o stand) 83.8lbs/ 38Kgs (w/ stand)

115lbs/52 Kgs

4.1. Operating:

Temperature

Relative humidity 20~80%

Pressure 800~1114hpa

4.2. Non-Operating:

Temperature

Relative humidity 20~90%

Pressure 700~1114hpa

Vibration X/Y/Z, 0.5G/10~55Hz(sweep), 10 minutes

4.3. Acoustics:

(IHF A-weighted 1meter) 40dB Max.

5. SOUND: a. Residual hum (at volume min) b. Practical max. Audio output (at 10% THD max.)

1.0vp-p 1K Hz input 5W +5W Max. /12 ohm c. Sound distortion (at 250 mw 1K Hz) e. Audio output (input at 1.4V

P-P

)

1% Max. d. Sound distortion (at i.ovp-p 1kHz input volume max ) 9% max

≧1.0 V

P-P f. Max. hum (at volume max) g. Sensitivity (at volume max. O/P 1W) at 1KHz AV Input h. Audio Fidelity (1KHz 0dB,corrected for emphasis characteristics)

BBE ON 60Hz

WOOFER & BBE OFF 100Hz

10KHz

2-5


6. RF

6.1 RF Sensitivity (Peak)

VHF

UHF

CATV

CH 2 ~ CH 13

CH 14 ~ CH 69

CH A-5 ~ CH W+29

6.2 AFT Pull-In Range

VHF

UHF

CATV

CH 2 ~ CH 13

CH 14 ~ CH 69

CH A-5 ~ CH W+29

6.3 Picture IF Rejection

VHF

UHF

CATV

CH 2 ~ CH 13

CH 14 ~ CH 69

CH A-5 ~ CH W+29

6.4 Picture Image Rejection

VHF

UHF

CATV

CH 2 ~ CH 13

CH 14 ~ CH 69

CH A-5 ~ CH W+29

30dB Max.

30dB Max.

30dB Max.

50dB Min.

50dB Min.

50dB Min.

40dB Min.

35dB Min.

35dB Min.

AGC Figure Of Merit 50dB Min.

RF signal range in which video at PDP drops 6 dB from output level obtained with 100mV input.

6.6 RF AGC Cut In Level

6.7

6.8

FM/AM Rejection (100mV at SIF input)

Noise Limits Sensitivity

14dB min

VHF 45dB max

UHF 49dB max

7. RELIABILITY REQUIREMENT:

The MTBF needs 20000hrs under operation 25

±±±±

℃

8. REGULATORY REQUIREMENTS:

8.1 Safety Requirement: a. UL b. CSA c. TUV

8.2 Emission Requirement:

The unit shall meet the EMI limits in all screen modes. For EMI testing, the unit must be failed with the screen pattern consisting of scrolling capital “H” characters also the brightness contrast will be adjusted to max. Level. a. FCC class A part 15

Safety of information technology equipment including electrical business equipment

Safety of information technology equipment including electrical business equipment

2-6


8.3 Transit test a. Drop Test

1. Forward and backward

2. Right and left

3. Up and down

8.4 Power Management:

200mm max.

30 minutes 1000 c.p.m



Stand-by

Power saving

No pulse No pulse No video Power off

Less than 5 watts

No pulse Pulse

This Plasma display is Energy star compliant when used with a computer equipped with

DPMS.

Note: The power indicator LED color is green in normal state, yellow in stand-by and power saving state.

VIDEO & AUDIO 9.

9.1 Video Signal Output (impedance 75 ohm)

2-7


APPENDIX A :

Preset Timing Chart

Item Description:

B

C

Active display area including borders

Active display area excluding borders

H Sync-width

Mode 1 2 3 4 5 6 7 8 9

Resolution

&

Refresh Rate

640

480

60

640

480

72

640

480

75

640

480

85

800

600

56

800

600

60

800

600

72

800

600

75

800

600

85 Hz

Pixel

800 832 840 832 1024 1056 1040 1056 1048 Dots

Horizontal Dots blanking Dots

Vertical Lines

Vertical 59.94

Horiz TTL

2-8


10 11 12 13 14 15 16 18 19

Resolution

&

Refresh Rate

Pixel

1024

768

60

1024

768

70

1024

768

75

1024

768

85

1280

1024

60

1280

1024

75

1280

1024

85

640

350

70

640

480

50 Hz

65 75 78.75 94.5 108 135 157.5 25.175 25.175 MHz

1024 1024 1024 1024 1280 1280 1280 640 640 Dots

1344 1328 1312 1376 1688 1688 1728 800 800 Dots

Horizontal Dots

136 136 96 96 112 144 160 96 96 Dots blanking Dots

Vertical Lines

Horizontal 48.4 56.5 60 68.7 63.98 79.98 91.15 31.50 31.5 KHz

60.01 70.07 75.03 84.99 60.02 75.03 85.02 70 50 Hz

Horiz TTL

Dot rate 65 75 78.75 94.5 108 135 157.5 25.175 25.175 MHz

&

Mode 20 21 22 23 24 25 26

Resolution

Refresh Rate

1280

720P

60

1920

1080I

60I

720

400

70

852

480

60

640

870

75

832

624

75

1152

870

75 Hz

Pixel MHz

Horizontal visible

Horizontal total

1266

1650

1901

2201

720

900

852

955

640

832

832

1152

1152

1456

Dots

Dots

Horizontal porch 42 68 18 19 32 32 32 Dots

63 63 108 48 80 64 128 Dots

Horizontal back porch 279 169 54 36 80 224 144 Dots blanking Dots

687 518 400 480 870 624 870 Lines

750 562.5 449 525 918 667 915 Lines

Vertical front porch 1 0.5 12 10 3 1 3 Lines

Vertical porch 56 38 35 33 42 39 39 Lines

Vertical blanking time

Horizontal

63 44.5 49 45 48 43 45 Lines

KHz

Vertical sync polarity

60 60 70.08 60.41 75.00 74.55 75.06

- - + - - - -

Hz

TTL

Dot rate 74.25 74.25 28.32 30 57.283 57.283 100.000 MHz

2-9

FACTORY & ELECTRONIC ADJUSTMENT VER1.0

1. PANEL Voltage Adjustment

The power voltage needs to be re-adjusted and checked whenever the panel module or power board module is changed.

POWER VOLTAGE ADJUSTMENT FOR SAMSUNG TTL PANEL

GND

DIGITAL BOARD

EXT INT

CN01

CN01 SELECT "INT"

CN05 SELECT "EXT"

POWER BOARD

VA VSC VS VR VSET

Voltage Check Points

EXT INT

CN05

SA Connector: Connect Pins 1 & 5

1. Remove the Image Board to access the Digital Board beneath it.

2. As shown in the diagram above (left), set the CN01 Jumper to “INT” and set the CN05*

Jumper to “EXT”.

3. Locate the Power Board and the SA Connector (see diagram above: right). Connect pins 1 and 5 of the SA connector. This connection will turn on the Panel Power.

4. Locate the Voltage Label under the upper right speaker holder. The Voltage Label specifies the 5 Voltage Adjustment Parameters and their respective values**.

5. Locate the Voltage Regulator-VR8005 on the Power Board and connect a Multimeter to the VA Voltage Check Point (see diagram above: right) and Ground. Adjust the

Voltage Regulator until the Multimeter voltage reading is equivalent to the VA value on the Voltage Label.

6. Repeat Step 5 for VSC, VS, VR and VSET adjustments. Follow the table below for the adjustment sequence and the Voltage Regulator to be adjusted for each Parameter.

1 st

→

2 nd

→

3 rd

→

4 th

→

5 th

VA VSC VS VR VSET

VR8005 VR8006 VR8003 VR8001 VR8007

3-1


Color Temperature Adjustment

2. Pre-setting Adjustment and Equipment Preparation:

(1) Turn on the PDP and let it warm up for at least 30 minutes.

(2) Turn on the Color Analyzer (ie. Minolta, Model = CA-100) and reset the Color

Analyzer.

(3) Change the PDP input mode to DVI and press the “Recall” key on the remote control to have the PDP set recalled back to default factory settings.

(4) Set up the Video Pattern Generator (ie. Chroma, Model = C2226) with the following settings: a. Timing: 640 x 480 @ 60Hz, b. Make sure the Output signal is Digital (DVI)

Connect the PDP DVI input connector to the Chroma DVI output connector.

(5) Dark level and bright level center block definition:

A. Dark level center block definition:

Pattern set = Pattern name = 1-mosaic,

Color form = norm,

Background color = 0

Foreground color = 17

According to the C-2226’s user manual, appendix analog-color: Normal Pen from

Pen 17 = R: 102, G: 102, B: 102

102 (output amplifier)/1024 (total amplifier)=10%, therefore the 10% is the 10 IRE white output pattern.

B. Bright level center block definition:

Pattern set = Pattern name = 1-mosaic,

Color form = norm,




Pen 25 = R: 614, G: 614, B: 614


(6) There are 3 different modes (DVI, RGB and AV) that have Color Temperature settings. For each one of these 3 modes, there are 4 different Color

Temperatures (5400K, 6500D, 9300K and 13800K) that can be individually adjusted. Each Color Temperature is adjusted through the dark level, bright level, Gain and Bias values.

3-2


(7) Press the following key sequence to access the Factory Adjustment Menu:

Press and hold down the Left Arrow key for at least 5 seconds, then press and hold down the Right Arrow key for at least 5 seconds followed by pressing the

FAV.SET key.

From the Factory Adjustment Menu, choose the Color Temp. Adj option and the following OSD will appear.

DVI (RGB, AV) 5400K (6500D, 9300K, 13800K)

R G B R G B

X X X X X X

*Note: When adjusting the DVI and RGB color temperatures, please set the PDP input source so that it matches the color temperature source being adjusted (DVI color temp. to be adjusted with DVI source under DVI mode, RGB color temp. with RGB source under RGB mode, AV color

temp. with Composite source under AV1 mode).*

(8) Flatly place the Minolta Color Analyzer’s Photo Detector in contact with the center of the PDP screen.

3. DVI Mode Color Temperature Adjustment procedure:

(1) With the PDP’s DVI input connected to Chroma C-2226’s DVI output connector, set the Chroma to send a dark level center block signal (10 IRE). Now press the Factory Adjustment key sequence as stated in point (7) above. The DVI

5400K Color Temperature setting menu will appear after choosing the Color

Temperature Adjustment option.

(2) Press the Left/Right Button to switch between the Bias (R, G, B) and Gain (R, G,

B) values. Use the Up/Down Buttons to change the Bias and Gain Values.

(3) 5400K dark level center block adjustment procedure:

A. Press the Left/Right key on the remote control to select G-BIAS and adjust

(using the up/down key) the G-Bias value until Y = 0.4±0.08 FL.

B. Press the Left/Right key on the remote control to select R-BIAS and adjust the R-Bias value until x = 335±8

C. Press the Left/Right key on the remote control to select B-BIAS and adjust the B-Bias value until y = 343±8

D. Repeat steps A, B and C until the following final values are obtained: x = 335±8 y = 343±8

Y = 0.4±0.08 FL

(4) 5400K bright level center block adjustment procedure: (Please set the Chroma

C-2226 DVI bright level center block signal to 60 IRE)

A. Select G-GAIN and adjust the G-GAIN value until Y = 30±0.8 FL.

B. Select R-GAIN and adjust the R-GAIN value until x = 335±8

C. Select B-GAIN and adjust the B-GAIN value until y = 343±8


Y = 30±0.8 FL

3-3


(5) Upon completion of Steps 3 and 4 above, press the FAV.SET key for the next

Color Temperature setting (5400→6500D→9300→13800).

For each color temperature setting, please repeat Steps 3 and 4 above but replace the x and y settings with the following values: a. 6500D: x = 313, y = 329 for both Dark and Bright Level Settings b. 9300K: x = 285, y = 295 for both Dark and Bright Level Settings c. 13800K: x = 260, y = 275 for both Dark and Bright Level Settings

For these 3 Color Temperatures (6500D, 9300K and 13800K), adjust the Dark and Bright Levels to the following Y values: a. Dark level Y = 0.4±0.08 FL b. Bright level Y = 30±0.8 FL

(6) Once all 4 Color Temperatures have been adjusted, skip through the RGB and

AV Color Temperatures (using the FAV.SET key) and completely exit the

Factory Adjustment Menu.

4. RGB Mode Color Temperature Adjustment procedure:

(1) Turn on the Color Analyzer (Minolta, Model = CA-100) and reset the Color

Analyzer.

(2) Switch the PDP input to RGB mode and press the “Recall” key on the remote control to have the PDP set recalled back to default factory settings.

(3) Set up the Video Pattern Generator (Chroma, Model = C2226) with the following settings: a. Timing: 640 x 480 @ 60Hz, b. Make sure the Output signal is Analog (RGB)

Connect the PDP RGB input connector to the Chroma C-2226 RGB output connector.

(4) Dark level and bright level center block definition:

C. Dark level center block definition:

Pattern set = Pattern name = 1-mosaic

Color form = norm




Pen 17 = R: 102, G: 102, B: 102


D. Bright level center block definition:

Pattern set = Pattern name = 1-mosaic

Color form = norm




Pen 25 = R: 614, G: 614, B: 614



(6) Set the Chroma C-2226 to a dark level center block signal (10 IRE). Enter the

Factory Adjustment Menu using the same Key sequence specified above and then select the Color Temperature Adjustment option. Using the FAV.SET key skip through all the DVI Color Temperatures until you reach the 5400K RGB

Color Temperature OSD.

3-4



A. Select G-BIAS and adjust the G-Bias value until Y = 0.5±0.08 FL

B. Select R-BIAS and adjust the R-Bias value until x = 335±8

C. Select B-BIAS and adjust the B-Bias value until y = 343±8


Y = 0.5±0.08 FL

(8) 5400K bright level center block adjustment procedure: (Please set the Chroma

C-2226 DVI bright level center block signal to 60 IRE)

A. Select G-GAIN and adjust the G-GAIN value until Y = 30±0.8 FL



D. Repeat steps A, B and C until the following final values are obtained: x = 335±8 y = 343±8 Y = 30±0.8 FL



For each color temperature setting, please repeat Steps 7 and 8 above but replace the x and y settings with the following values: a. 6500D: x = 313, y = 329 for both Dark and Bright Level Settings b. 9300K: x = 285, y = 295 for both Dark and Bright Level Settings c. 13800K: x = 260, y = 275 for both Dark and Bright Level Settings

For these 3 Color Temperatures (6500D, 9300K and 13800K), adjust the Dark and Bright Levels to the following Y values: a. Dark level Y = 0.5±0.08 FL b. Bright level Y = 30±0.8 FL

(10) Once all 4 Color Temperatures have been adjusted, skip through the AV

Color Temperatures and completely exit the Factory Adjustment Menu.

5. AV Mode Color Temperature Adjustment procedure:

(1) Turn on the Color Analyzer (Minolta, Model = CA-100) and reset the Color

Analyzer.

(2) Switch the PDP input to AV1 mode and press the “Recall” key on the remote control to have the PDP set recalled back to default factory settings.

(3) Using a Pattern Generator (ie. SENCORE VP-300 Multimedia Video Generator) set the dark level and bright level center block with the following settings:

A. Dark Level Center block definition: a. Signal Type: NTSC/PAL c. Pattern = WINDOW 1 14 IRE

B. Bright Level Center block definition: a. Signal Type: NTSC/PAL b. Format: NTSC c. Pattern = WINDOW 2 60 IRE

(4) Connect the PDP AV1 input to the VP-300 Composite output connector.


(6) Set the VP-300 to send a dark level center block signal (14 IRE). Enter the

Factory Adjustment Menu using the same Key sequence specified above and then select the Color Temperature Adjustment option. Using the FAV.SET key skip through all the DVI and RGB Color Temperatures until you reach the

5400K AV Color Temperature OSD.

3-5



A. Select G-BIAS and adjust the G-Bias value until Y = 1.2±0.1 FL.

B. Select R-BIAS and adjust the R-Bias value until x = 335±10

C. Select B-BIAS and adjust the B-Bias value until y = 343±10


Y = 1.2±0.1 FL

(8) 5400K bright level center block adjustment procedure: (Please set the VP-300 bright level center block signal to 60 IRE)

A. Select G-GAIN and adjust the G-GAIN value until Y = 30±1 FL




Y = 30±1 FL



For each color temperature setting, please repeat Steps 7 and 8 above but replace the x, y and Y values with the following values: a. 6500D: x = 313, y = 329 for both Dark and Bright Level Settings b. 9300K: x = 285, y = 295 for both Dark and Bright Level Settings c. 13800K: x = 260, y = 275 for both Dark and Bright Level Settings

For these 3 Color Temperatures (6500D, 9300K and 13800K), adjust the Dark and Bright Levels to the following Y values: a. Dark level Y = 1.2±0.1 FL b. Bright level Y = 30±1 FL

Once all 4 Color Temperatures have been set you will automatically exit the Color Temperature

Adjustment. Once you exit the Color Temperature Adjustment proceed on by completely exiting the Factory Adjustment Menu.

3-6

BLOCK DIAGRAM VER1.0

Front

Button

Control

Board

Assy

4

JA3

Pin[1:6]

Pow er

SW

AV Module

Board(with

Tuner)

Assy

JP2

Pin[1:32]

5

6

JP1

Pin[1:32]

Interface Board- Y Ass'y

Logic E-Buffer

LA03

Pin[1:31]

11

PDP Socket Diagram

J1

Pin[1:31]

(L VDS)

JP5

J15

Pin[1:4]

(9 V)

J25

Pin[1:3]

(5 V)

Logic Board Ass'y

Image Board

Ass'y

JP4

PinA[1:48]

J14

Pin[1:6]

(5 V,SB DET )

J21

Pin[1:7]

(2 4 V,9 V)

J12

Pin[1:10]

(A ud i o S i gn a l )

J11

Pin[1:12]

(A ud i o DC,S up pl y)

J5

Pin[1:6]

(K ey)

1

7

AC

PLUG

JA2

Pin[1:10]

JA1

Pin[1:12]

SA

CON8011

Pin[1:6]

Pin[7:13]

AUDIO

CON8009

Pin[1:7]

Pin[1:2]

Audio Amplifier

Board Ass'y

3

PANEL Power

Supply Ass'y

8

AC Master power swith Board

SW

2

AC IN

AC OUT

9

Logic F-Buffer

Power Input

Module

Assy

Pa n el 's B oa rd A ssem b l y

14

SA M PO Bo ard A sse m b ly

4-1


Image Board Socket Data

Im age Board As s 'y Im age Board AV Module Board Content Im age Board AV Module Board Content

Pin 1

Pin 2

Pin 3

Pin 4

Pin 5

Pin 6

Pin 7

Pin 8

Pin 9

Pin 10

Pin 11

Pin 12

Pin 13

Pin 14

Pin 15

Pin 16

Pin 17

Pin 18

Pin 19

Pin 20

Pin 21

Pin 22

Pin 23

Pin 24

Pin 25

Pin 26

Pin 27

Pin 28

Pin 29

Pin 30

Pin 31

Pin 32

Pin 33

Pin 34

Pin 35

Pin 36

Pin 37

Pin 38

Pin 39

Pin 40

NC

NC

NC

NC

NC

NC

NC

NC

NC

NC

GND

NC

GND

NC

GND

NC

GND

J1 (40 Pin)

GND

NC

RA-

RA+

GND

GND

RB-

RB+

GND

GND

RC-

RC+

GND

GND

RCLK-

RCLK+

GND

GND

RD-

RD+

GND

GND

GND

J14 (6 Pin)

+5 VSB

DGND

DGND

5V1

SB

DGND

J15 (4 Pin)

VGND

VGND

NC

+9 V

J21 (7 Pin)

+9 VT

NC

DGND

+2 4V

+2 4V

GND

GND

J25 (3 Pin)

+5 VA

VGND

VGND

B11

B10

B9

B8

B7

B6

B5

B4

B3

B2

B1

C1

C2

C3

C4

C5

C6

C7

A4

A3

A2

A1

B16

B15

B14

B13

B12

JP2 (48 Pi n)

A16

A15

A14

A13

A12

A11

A10

A9

A8

A7

A6

A5

C8

C9

C10

C11

C12

C13

C14

C15

C16

A13

A14

A15

A16

B1

B2

B3

B4

B5

B6

B7

B8

B9

B10

B11

B12

JP5 (48 Pi n)

A1

A2

A3

A4

A5

A6

A7

A8

A9

A10

A11

A12

B13

B14

B15

B16

C1

C2

C3

C4

C5

C6

C7

C8

C9

C10

C11

C12

C13

C14

C15

C16

+9 VT

DGND

NC

DGND

SCL2

DGND

SDA2

DGND

NC

DGND

T V_R

DGND

T V_L

DGND

AFT _T UN

T UN_ DET n

DVI_L

DVI_R

AGND

L_ OUT

R_OUT

SUB_ WFR

PWR_ CT L

AGND

AGND

AGND

AGND

AGND

AGND

D_CT L

RESET Q

SD

AS_M P

AS_SP

RST _ DPT V

SV2_SW

V2B_DET n

YUVn _RGB

15 Kn_M P

15 Kn_SP

SB5V

T DO

T DI

NC

NC

T M S

DGND

T CK

A10

A11

A12

A13

A14

A15

A16

B1

B2

B3

B4

B5

B6

B7

B8

B9

B10

B11

B12

B13

B14

B15

B16

C1

C2

C3

C4

C5

C6

C7

C8

C9

C10

C11

C12

C13

C14

C15

C16

JP5 (48 Pi n)

A1

A2

A3

A4

A5

A6

A7

A8

A9

A7

A6

A5

A4

A3

A2

A1

B16

B15

B14

B13

B12

B11

B10

B9

B8

JP2 (48 Pi n)

A16

A15

A14

A13

A12

A11

A10

A9

A8

B7

B6

B5

B4

B3

B2

B1

C1

C2

C3

C4

C5

C6

C7

C8

C9

C10

C11

C12

C13

C14

C15

C16

COM PO SIT E

VGND

S2_ Y

S2_ C

VGND

Y1

PB1_CB1

PR1_CR1

VGND

Y2

PB2_CB2

PR2_CR2

VGND

AVB_ DET n

T V

VGND

AV1_L

AV1_R

AGND

S2_ L

S2_ R

AGND

YUV1 _L

YUV1 _R

AGND

YUV2 _L

YUV2 _R

AGND

RGB_L

RGB_R

AGND

AGND

PCn_M PU

PCSCS

PCSI

PCSCL K

SSO

DGND

P5V

SCL2

SDA2

DGND

SCL_SP

SDA_ SP

DGND

SCL2_ 33

SDA2 _3 3

DGND

Im age Board

J11 (1 2 Pin )

Pin 1

Pin 2

Pin 3

Pin 4

Pin 5

Pin 6

Pin 7

Pin 8

Pin 9

Pin 10

Pin 11

Pin 12

Audio Am plifier Board

JA1 (12 Pi n)

Pin 1

Pin 2

Pin 3

Pin 4

Pin 5

Pin 6

Pin 7

Pin 8

Pin 9

Pin 10

Pin 11

Pin 12

Content

24 V

24 V

DGND

SB5V

DGND

AO_SEL

SDA2

SCL2

A_M UT En

SURR1

SURR2

DGND

Im age Board

J12 (1 0 Pin )

Pin 1

Pin 2

Pin 3

Pin 4

Pin 5

Pin 6

Pin 7

Pin 8

Pin 9

Pin 10

Audio Am plifier Board

JA2 (10 Pi n)

Pin 1

Pin 2

Pin 3

Pin 4

Pin 5

Pin 6

Pin 7

Pin 8

Pin 9

Pin 10

4-2

Content

L_ IN

R_IN

AGND

L_ OUT

R_OUT

AGND

SUB_ WFR

SPK_ CT L

PWR_ CT L

NC

Im age Board

J5 (6 Pin )

Pin 1

Pin 2

Pin 3

Pin 4

Pin 5

Pin 6

Front Button Control

Board

JA3 (6 Pin )

Pin 1

Pin 2

Pin 3

Pin 4

Pin 5

Pin 6

Content

RC_OUT

SW_ OUT

ON_L ED

SB_LED

DGND

SB5V


Image Board Signal Block Diagram

SDRAM

(PAGE4)

Y1/CB/CR

Y1/PB/PR

TV

AV

S-VIDEO

TA8551CH

AV

SWITCH

IC1

(PAGE2)

MULTIPLEX

SWITCH

IC3

VIDEO

Y

C

VIDEO

Y

C

YCBCR

6630/6730

MAIN Video

Processor

U45

(PAGE3)

6630/6730

SUB Video

Porcessor

U46

(PAGE5)

SDRAM

(PAGE6)

YCBCR/YPBPR

YCBCR/YPBPR

MULTIPLEX

SWITCH

IC2

YUV

TA1276

Color Space

Conveter

RGB IN

MULTIPLEX

SWITCH

U34

(PAGE7)

R,G,B

RGB OUT

AD

Converter

U29

(PAGE8)

SIL161 DVI

U32

(PAGE10)

DVI IN

SDRAM

(PAGE12)

SCALE IC

C711/C713

U23

(PAGE11)

LVDS

TRANSMITTER

(PAGE14)

Clock

Generator

9161A(PLL)

(PAGE13)

P

A

N

E

L

U43

CPU

U4

MULTIPLEX

SWITCH (PAGE9)

Y2/CB/CR

Y2/PB/PR

IC7

RS232

(PAGE1)

4-3


Image board Power Block Diagram

J14

3

4

1

2

5

6

+5VSB

+5V1

SB5V (USB 5V, SB5V_ M , SB5 V_IO , SB5V_ CP U)

D43

P5V

(5 V _O S D)

VDDM

5VDDA

REG_5V

5VDDD

5VDDM1

SB5V_V

U63

U13

U61

U62

U60

U56

U52

U31

U28

U54

U58

R376

V33SB

USB3V

SB5V_VO

V33

(V DD33)

V33P

L15

V33TMP

(V DRA M )

VCC3

(V CC3_M )

VCCA3

V33ADC

V33PLL

VADC3

V25_MP

L13

L17

VCCPLL

VCCBF

VIP711

J21

CON8009

1

2

3

4

5

6

7

8

9

CON8011

1

2

3

7

8

9

4

5

6

10

11

12

13

1

4

5

2

3

6

7

+5VA

+5VA

+9VT

+24V

1

2

3

J25

+9V

3

4

1

2

J15

A5V

P9V (+9V )

P24V

A5V

IC9 P5V_COLOR

REG_5V_S J25

U53 VCCA3_S

1

2

3

U55 VADC3_S

U57 VCC3_S

(V CC3_M _S )

U59 V25_SP

4-4


PDP Sound Block Diagram

FRO M A V

S EL E CT O R

ICR1

S RS S URRO UND

P RO CE S SO R

IC1

B BE & S O UND

P RO CE S SO R

Q 1/Q 2

INP UT B UFFE R

ICA 3

FIX E D/V A RIB LE

O UT P UT

S EL E CT O R

U1

B UFFE R

A M P LIFIE R

P AG E 1

ICS 1

LP F

ICA 1 /ICA 2

M UT E

IC2

M A IN P O WE R

A M P LIFIE R

ICS 2

M UT E

P AG E 2

A V_ O UT P UT

Q 8/Q 9 /Q 1 1

M UT E

S UB _ WO O FE R

O UT P UT

INS IDE

S PE A K ER

DPWB1 13 72 -1G -S-

4-5


Tuner Signal Block Diagram

T U2 0 1 RF

M O DUL E

5 V

T U2 0 1 PIF

M O DUL E

PO WER BL O CK

7 8 0 5

IC2 0 2

AUDIO O UT

9 V

7 8 0 9

IC2 0 1

NE 5 5 5

IC2 4 1

3 1 V

2 SC2 4 82

Q 2 4 1

9 V_ T

FRO M IM AG E BO A RD CP U

SDA2

UP C 1 8 54 A CT

M T S

IC2 0 3

JP 2

SCL 2

T V _ L O UT

T V _ R OUT

VIDE O O UT

DPWB11396-1G-T-

4-6

Trouble Shooting Guides VER1.0

No Power

SET POWER ON

AC Master Power

Switch Board

(DPWB11398-1G---)

Check

G

AC Filter

(LJ92-00579A)

Check

G

Main Power

(LJ44-00025A)

Check

NG

NG

Replace

AC Filter

(LJ92-00579A) Check

OK

Replace

Main Power

(LJ44-00025A) Check

OK

5-1


No Picture

No Picture

AV Module Board

(with Tuner)

(DPWB11396-1G-T-)

Check

G

Image Board

(DPWB11393-1GGW

S)

Check

G

PDP Panel Module

(VVEPP42SD001F--)

Check

NG

NG

NG

Replace

Image Board

(DPWB11393-1GGWS)

Check

Replace

PDP Panel Module

(VVEPP42SD001F--)

Check

OK

OK

Replace

AV Module Board

(with Tuner)

(DPWB11396-1G-T-)

Check

OK

5-2


Vertical Line Fail

Vertical Line Fail

X Drive

(LJ92-00596C)

Check

G

PDP Panel Module

Assembly

(VVEPP42SD001F--)

Check

NG

Replace

X Drive

(LJ92-00596C)

Check

NG

Replace

PDP Panel Module

Assembly

(VVEPP42SD001F--)

Check

OK

OK

5-3


Horizontal Line Fail

Horizontal Line

Fail

Y Drive

(LJ92-00597C)

Check

G

Y-Buffer (Upper)

(LJ92-00570A) Check

Y-Buffer (Lower)

(LJ92-00571A) Check

G

PDP Panel Module

Assembly

(VVEPP42SD001F--)

Check

NG

NG

NG

Replace

Y Drive

(LJ92-00597C)

Check

Replace

Y-Buffer (Upper)

(LJ92-00570A) Check

Y-Buffer (Lower)

(LJ92-00571A) Check

OK

Replace

PDP Panel Assembly

(VEPP42SD001F--)

Check

OK

OK

5-4


No Remote Control

SET POWER ON

Remote Control

G


Board

(DPWB11372-1G-K2)

Check

G

Image Board

(DPWB11393-1GG

WS)Check

NG

NG

Replace

Front Button Control Board

(DPWB11372-1G-K2)

Check

NG

Replace

Battery

OK

OK

Replace Image Board

(DPWB11393-1GGWS)

Check

OK

Replace

BRC-241

OK

5-5


Front Button Fail

SET POWER ON


Board

DPWB11372-1G-K2

Y

Image Board

DPWB11393-1GGWS

N

N

Replace Front Button

Control Board

DPWB11372-1G-K2

OK

Replace

Image Board

DPWB11393-1GGWS

OK

5-6

B.O.M of Board Assembly

Module Breakdown

VER1.0

Model Name: GTW-P42M203

No.

Module

1 Image Board

2 AC Master Power Switch Board

3 Audio Amplifier Board

4 Front Button Control Board

5 AV w/ Tuner Module Board

6

Logic Board

7

X Drive

8

Y Drive

9

Logic E - Buffer

10

Logic F - Buffer

11

Y-Buffer (Upper)

12

Y-Buffer (Lower)

13

Main Power

14

AC Filter

15 PDP Panel Module

16 Glass Filter

Supplier Supplier's Ass'y Part #

Sampo

Sampo

Sampo

Sampo

Sampo

Samsung LJ92-00621A

Samsung LJ92-00596C

Samsung

Samsung

Samsung

Samsung

Samsung

Samsung

LJ92-00597C

LJ92-00600A

LJ92-00601A

LJ92-00570A

LJ92-00571A

LJ44-00025A

Samsung LJ92-00579A

Samsung VVEPP42SD001F--

Sampo

17 Speaker

18 Front Bezel

Sampo

Sampo

19 Rear Cover Sampo

20 Plasma Stand Assembly- Leg Type Sampo

DPWB11393-1GGWS

DPWB11398-1G---

DPWB11372-1G-S-

DPWB11372-1G-K2

DPWB11396-1G-T-

PGLS-0013-1----

RSPK1L068-1CFI-

DMSKP0124-1FAL

GCABB0297-1P--

DSTN-0009-1F--A

I

Quantity Per

Final Assembly

1 TSMT

1 TSMT

1

1

1

1

1

1

1

1

1

1

1

1

1

1

2

1

1

2

TSMT

-

-

-

-

-

-

-

TSMT

TSMT

Danam

-

-

Sub-Con Name

Asahi Glass Corporation

In Hana Industrial Co. Ltd.

Cheng Fa Plastic Mfg Co., Ltd.

Yund Cheng Industrial Co., Ltd.

Yo Tai Plastic Industrial Co., Ltd.

Remark:

1. Please refer to each "Module BOM (#)" Tab for each module accroding to the No. indicated in the first column.

2. OR: Original Revision

6-1

-

-

Korea

-

-

Japan

Taiwan

Taiwan

Taiwan

Taiwan

-

-

-

-

-

Sub-Con

Location

Taiwan

Taiwan

Taiwan

Taiwan

Taiwan

A1

A1

A1

0.2

V1

OR

OR

AL

I

A

Current Revision

Level

S11393-05-1A1

OR

A11372-02-100

K2

T11396-00-100

A4

A1

A1

A1

A1


Module Part Level BOM

Module Name:

Supplier Name:

Module P/N:

Revision:

Image Board

Sampo

DPWB11393-1GGWS

S11393-05-1A1

Part # Part Number Name

QCNCP1623-140-A

QCNCS1680-1----

QCNWT1285-1001-

QCNWT128A-1001-

QPWB11393-1G-5-

QSOCD1550-115--

QSOCD1553-109--

QSOCD1555-124--

QSOCI1177-108--

QSOCI1514-132-S

RCHO-1022D8----

RCHOL1020-1100-

RCORA1021-1---U

Connector

Connector

PCB Bareboard

Socket

Socket

DVI Socket

IC Socket

IC Socket

Choke

Choke

Bead core

RCORA1047-1---A Bead core

RCORA1048-1121A Bead core

RCRSL1185-1---A

RCRSL1187-1---A

Crystal

Crystal

RNWR-0028CM103A Network Resister



TLABD1145-1B---

TLABD1149-1B---

Barcode label

Label

VCEABN1CG106MNA Capacity,Aluminum Elect.

VER1.0

40PIN

48pin

Image Board

24PIN

8Pin

32Pin

330uH

10uH

0.45uH

120Ω/100MHz

120Ω/100MHz

16MHz

14.318MHz

10K ohm

22 ohm

33 ohm

10uF

Part Description

16V ±20%

Quantity per

Assembly

1

1

1

2

1

2

3

4

1

2

9

13

1

1

5

1

1

1

3

Supplier Name

Chia-Soon Electronics Co., Ltd.

Oupiin Enterprise Co., Ltd.

JST ELECTRONIC PRODUCTS MFG.CO.,LTD

J1

JP4 JP5


EISD Enterprise Co., Ltd.



MOLEX

Suyin Corporation


Top-Nation Electronic Factory

Taiwan Sumida Electronics Inc.

Murata Mfg. Co., Ltd.

Walsin Technology Corp.

Walsin Technology Corp.

KDS Taiwan Electronics Corp.

KDS Taiwan Electronics Corp.

Yageo Corporation

Yageo Corporation

Ref Designator

PCB

S1 S2

P1

J9

U33 Socket U35 Socket U7 Socket

U3 SOCKET

L24

L25 L26 L27 L28 L30

L29

F21 F23 F26

L21 L22 L23 R87

Y1

Y3 YD1

RP1 RP2 RP3 RP5 RP8 RP9 RP12 RP43 RP45

RND1 RND2 RND3 RND4 RND5 RND6 RP35 RP36 RP37 RP38 RP39 RP40

RP41

24 Yageo Corporation RP10 RP11 RP13 RP14 RP15 RP16 RP17 RP18 RP19 RP20 RP21 RP22 RP23

RP24 RP25 RP26 RP27 RP28 RP29 RP30 RP31 RP32 RP33 RP34

1

1

62

Diing Yih Enterprise Co., Ltd.

Trim International Inc.

Matsushita Electric Co., Ltd.

C9 C10 C13 C14 C15 C27 C43 C58 C99 C115 C158 C185 C214 C219 C220

C221 C222 C223 C230 C231 C246 C251 C253 C258 C271 C310 C312 C322

C324 C391 C399 C400 C401 C405 C406 C407 C409 C415 CD8 CD17 CD22

CD36 CD40 CD45 CD47 CD49 CD51 CD53 CD67 CD71 CDS8 CDS17 CDS22

CDS36 CDS40 CDS45 CDS47 CDS49 CDS51 CDS53 CDS67 CDS71

6-2



Module Name:

Supplier Name:

Module P/N:

Revision:

Image Board

Sampo

DPWB11393-1GGWS

S11393-05-1A1







VCEABN1EG227MNA Capacity,Aluminum Elect.

VCEABN1HG105MNA Capacity,Aluminum Elect.



VCEABN1VG475MNA Capacity,Aluminum Elect.

VCEACU1HG476MNP Capacity,Aluminum Elect.

VCICHN1HH100J-A Capacity,Temp. Comp. Ceramic









VER1.0

100uF


16V ±20%

Quantity per

Assembly

22

Supplier Name


22uF

220uF

330uF

47uF

12PF

120PF

180PF

20PF

22PF

33PF

330PF

220uF

1uF

0.22uF

2.2uF

4.7uF

47uF

10PF

100PF

16V

16V

16V

16V

25V

50V

50V

50V

35V

50V

50V

50V

50V

50V

50V

50V

50V

50V

50V

±20%

±20%

±20%

±20%

±20%

±20%

±20%

±20%

±20%

±20%

±5%

±5%

±5%

±5%

±5%

±5%

±5%

±5%

±5%

32

10

2

34

5

2

3

3

8

3

6





2

11

1

20





4

1

11

31



Yageo Corporation

Yageo Corporation

Yageo Corporation

Yageo Corporation

Yageo Corporation

Yageo Corporation

Yageo Corporation

Yageo Corporation

Yageo Corporation

Ref Designator

C86 C124 C211 C224 C226 C237 C241 C259 C266 C291 C295 C299 C309

C311 C321 C323 C338 C343 C346 C349 C381 C412

C65 C71 C72 C73 C160 C194 C203 C204 C268 C277 CD16 CD23 CD69 CD82

CD84 CD87 CD89 CD92 CD94 CD97 CD99 CDS16 CDS23 CDS69 CDS82

CDS84 CDS87 CDS89 CDS92 CDS94 CDS97 CDSA1

C197 C202 C210 C337 C342 C345 C348 C411 CD18 CDS18

C269 C287

C37 C55 C59 C162 C165 C167 C171 C172 C173 C175 C179 C190 C191 C193

C195 C215 C217 C229 C233 C234 C238 C239 C240 C249 C256 C284 C410

C417 CD9 CD13 CD15 CDS9 CDS13 CDS15

C333 C335

C31 C34 C192 C236 C275 C283 C297 CD12 CD14 CDS12 CDS14

C288

C4 C183 C184 C186 C187 C188 C189 C198 C199 C205 C206 C207 C208

C248 C273 C274 C276 C281 C282 C286

C384 C385 C386 C389

C216

C6 C7 CD38 CD39 CD42 CD43 CD44 CDS38 CDS39 CDS42 CDS44

C29 C30 C140 C153 C154 C155 C156 C166 C169 C176 C180 C181 C182 C232

C245 C265 C301 C308 C341 CD6 CD10 CD21 CD25 CD37 CD41 CDS6

CDS10 CDS21 CDS25 CDS37 CDS41

C22 C51 C52

C16 C17 C18 C19 C20 C375

C35 C36 C306 C307 C383

CD3 CD4

C300 C404 C414

C2 C3 C303

C144 C145 C146 C147 C148 C149 C150 C151

6-3



Module Name:

Supplier Name:

Module P/N:

Revision:

Image Board

Sampo

DPWB11393-1GGWS

S11393-05-1A1





VCICHN1HH680J-A Capacity,High Diel. Ceramic

VCLFCN1HY224M-A Capacity,High Diel. Ceramic

VCLFHN1EY104Z-A Capacity,High Diel. Ceramic

VCLRHN1CB393K-A Capacity,High Diel. Ceramic



VCLRHN1HB102K-A Capacity,High Diel. Ceramic

VER1.0

47PF


50V ±5%

Quantity per

Assembly

25

Supplier Name

Yageo Corporation

470PF

560PF

68PF

0.22uF

0.1uF

50V

50V

±5%

±5%

50V

50V

±5%

±20%

25V +80%~-20%

1

1

1

5

187

Yageo Corporation

Samsung

Yageo Corporation

Yageo Corporation

Yageo Corporation

0.039uF

0.047uF

0.068uF

1000PF

16V

16V

16V

50V

±10%

±10%

±10%

±10%

1

3

1

27

Yageo Corporation

Yageo Corporation

Yageo Corporation

Yageo Corporation

Ref Designator

C305 C351 C352 C353 C354 C355 C356 C357 C358 C359 C360 C361 C362

C363 C364 C365 C366 C367 C368 C369 C370 C371 C372 C373 C374

C177

C387

C54

C200 C334 C380 C402 C403

C1 C5 C8 C11 C12 C21 C23 C24 C25 C28 C33 C38 C39 C40 C50 C56 C57



C100 C101 C102 C103 C104 C105 C107 C111 C114 C116 C117 C118 C119

C120 C121 C122 C123 C125 C127 C129 C130 C131 C132 C133 C134 C135

C136 C137 C138 C139 C157 C161 C178 C212 C213 C267 C278 C279 C280

C304 C313 C315 C317 C319 C325 C327 C329 C331 C336 C339 C344 C347

C350 C390 C392 C393 C394 C395 C396 C397 C398 C408 C413 C419 C421

C423 C425 C427 CD5 CD7 CD11 CD24 CD26 CD27 CD28 CD29 CD32 CD33

CD34 CD35 CD46 CD48 CD50 CD52 CD54 CD55 CD56 CD57 CD58 CD59

CD60 CD68 CD70 CD72 CD85 CD86 CD90 CD91 CD95 CD96 CD100 CD101

CDS5 CDS7 CDS11 CDS24 CDS26 CDS27 CDS28 CDS29 CDS32 CDS33



CDS95 CDS96 CDS99 CDSB2

C113

C108 C109 C110

C388

C376 C377 C378 C379 C430 CD30 CD31 CD73 CD74 CD75 CD76 CD77

CD78 CD79 CD80 CD81 CDS30 CDS31 CDS73 CDS74 CDS75 CDS76 CDS77

CDS78 CDS79 CDS80 CDS81

6-4



Module Name:

Supplier Name:

Module P/N:

Revision:

Image Board

Sampo

DPWB11393-1GGWS

S11393-05-1A1





VCNCP0053-JJST-

VCNCP0054-JJST-

Connector

Connector

VCNCP0056-JJST-

VCNCP0057-JJST-

VCNCP0316-EJST-

VCNCP031A-EJST-

Connector

Connector

Connector

Connector

VCNCP031C-EJSTConnector

VCNCT1285-BJSTA Connector

VCNCT128A-BJSTA Connector

VCPELU1HG222J-P Capacity,Polyester Film

VCTABN1AB106M-A Capacity,tantalum

VRMBNV8--000J-A Resiser,Metal Film

VRMBNV8--181J-A Resiser,Metal Film

VRMHNVG--000J-A Resiser,Metal Film


VER1.0

0.01uF

2200PF

3900PF

3 Pin

4 Pin

6 Pin

7 Pin

6 Pin

10 Pin

12 Pin

5 PIN

10PIN

2200PF

10uF

0

180

0

10


50V

50V

50V

50V

10V

1/8W

1/8W

1/16W

1/16W

±10%

±10%

±10%

±5%

±20%

±5%

±5%

±5%

±5%

1

2

2

1

4

68

1

1

1

1

4

1

1

1

Quantity per

Assembly

67

Supplier Name

Yageo Corporation

Ref Designator

C106 C126 C128 C159 C163 C164 C168 C170 C174 C196 C201 C209 C218

C225 C228 C235 C247 C260 C270 C272 C290 C292 C293 C294 C298 C314

C316 C318 C320 C326 C328 C330 C332 C340 C382 CD61 CD62 CD63 CD64

CD65 CD66 CD102 CD103 CD104 CD105 CD106 CD107 CD108 CD109

CD110 CD111 CDS61 CDS62 CDS63 CDS64 CDS65 CDS66 CDSA2 CDSA3

CDSA4 CDSA5 CDSA6 CDSA7 CDSA8 CDSA9 CDSB0 CDSB1

Yageo Corporation CD1 CD2 CDS1 CDS2

Yageo Corporation C112


J25

JST ELECTRONIC PRODUCTS MFG.CO.,LTD J15


J14


J21


J5

JST ELECTRONIC PRODUCTS MFG.CO.,LTD J12


J11


J26 J27


J23 J24

Mylar Electronics Co., Ltd.

C289

Energie Electronic Co., Ltd.

Yageo Corporation

C141 C142 C143 C152

F1 F2 F5 F6 F7 F8 F9 F10 F11 F12 F13 F15 F17 F18 F20 F22 F24 L1 L2 L3 L4

L6 L7 L9 L10 L11 L12 L13 L15 L16 L17 L18 L19 L31 L33 L36 L38 L50 LD1

LD2 LD3 LD4 LD5 LD6 LD7 LD8 LD11 LD12 LD13 LD14 LD18 LD22 LD26

LDS1 LDS2 LDS3 LDS4 LDS5 LDS6 LDS7 LDS8 LDS11 LDS12 LDS13

LDS14 LDS15 LDS17 LDS19

2

40

20

Yageo Corporation

Yageo Corporation

Yageo Corporation

F3 F4

R49 R91 R96 R98 R101 R123 R139 R229 R236 R246 R258 R259 R260 R261

R263 R272 R320 R340 R341 R342 R344 R345 R385 R389 R391 R393 R402

R404 R408 RD1 RD2 RD19 RD28 RD35 RDS1 RDS2 RDS19 RDS22 RDS28

RDS35

R22 R23 R38 R40 R175 R187 R189 R192 R193 R230 R235 R254 R257 R376

R377 R378 R379 R380 R381 R383

6-5



Module Name:

Supplier Name:

Module P/N:

Revision:

Image Board

Sampo

DPWB11393-1GGWS

S11393-05-1A1










VRMHNVG-1240F-A Resiser,Metal Film


















VER1.0

100

1K


1/16W

1/16W

±5%

±5%

Quantity per

Assembly

16

Supplier Name

Yageo Corporation

17 Yageo Corporation

10K 1/16W ±5% 30 Yageo Corporation

100K

1M

150

1.5K

180

1.8K

18K

2K

22

220

2.2K

22K

120

1.2K

12K

124

120K

1.3K

220K

27

2.7K

27K

30K

±5%

±5%

±5%

±5%

±5%

±5%

±5%

±5%

±5%

±5%

±5%

±5%

±5%

±5%

±5%

±1%

±5%

±5%

±5%

±5%

±5%

±5%

±5%

1/16W

1/16W

1/16W

1/16W

1/16W

1/16W

1/16W

1/16W

1/16W

1/16W

1/16W

1/16W

1/16W

1/16W

1/16W

1/16W

1/16W

1/16W

1/16W

1/16W

1/16W

1/16W

1/16W

3

1

8

10

1

7

5

10

4

1

3

4

3

4

2

1

3

11

1

2

2

1

3

Yageo Corporation

Yageo Corporation

Yageo Corporation

Yageo Corporation

Yageo Corporation

Yageo Corporation

Yageo Corporation

Yageo Corporation

Yageo Corporation

Yageo Corporation

Yageo Corporation

Yageo Corporation

Yageo Corporation

Yageo Corporation

Yageo Corporation

Yageo Corporation

Yageo Corporation

Yageo Corporation

Yageo Corporation

Yageo Corporation

Yageo Corporation

Yageo Corporation

Yageo Corporation

6-6

Ref Designator

R62 R65 R66 R67 R145 R150 R154 R159 R160 R163 R195 R198 R200 R273

R281 R286

R58 R168 R170 R205 R225 R239 R256 R270 R271 R279 R303 R306 R308

R327 R335 R337 R338

R1 R5 R36 R37 R39 R89 R92 R93 R106 R119 R120 R125 R134 R136 R138

R142 R144 R156 R161 R162 R178 R184 R265 R287 R313 R339 RD13 RD23

RDS13 RDS23

R6 R266 R310

R309

R372 R373 R374

R148 R151 R155 R164 R165 R166 R282 R295 R355 R356 R357

R289 R291 R305

R397 R398 R400 R401

R243 R300

R71

R211 R217 R220 R223 R386

R208 R209 R213 R215 R218 R219 R221 R222 R276 R285

R241 R247 R269 R292

R387

R262 R264 R275

R118 R232 R237 R248

R54 R86 R382 RDS3 RDS4 RDS5 RDS6 RDS12

R202 R224 R316 R369 R370 R371 RD16 RD20 RDS16 RDS20

R288

R27 R30 R34 R35 R297 R301 R311

R250

R72 R74 R388

R268

RD10 RDS10

R283 R284

B.O.M of Board Assembly VER1.0


Module Name:

Supplier Name:

Module P/N:

Revision:

Image Board

Sampo

DPWB11393-1GGWS

S11393-05-1A1













VRMHNVG--4R7J-A Resiser,Metal Film








VSDBAV99------A Diode

VSDRLS4148----A Diode

VSI29C020CP90BS

VSI5160L16-7--D

IC- 256K CMOS Flash Memory

IC- SDRAM

33

3.3K

33K

39

390

3.9K

39K

47

4.7K

47K

470K

4.7

560

5.6K

56K

6.8K

75

820

82K

BAV99

RLS4148


29C020CP90BS

5160L16-7

1/16W

1/16W

1/16W

1/16W

1/16W

1/16W

1/16W

1/16W

1/16W

1/16W

1/16W

1/16W

1/16W

1/16W

1/16W

1/16W

1/16W

1/16W

1/16W

±5%

±5%

±5%

±5%

±5%

±5%

±5%

±5%

±5%

±5%

±5%

±5%

±5%

±5%

±5%

±5%

±5%

±5%

±5%

1

4

2

4

5

2

20

2

3

1

1

2

7

6

17

Quantity per

Assembly

39

Supplier Name

Yageo Corporation

22

1

1

22

22

1

3

Ref Designator

R10 R12 R18 R19 R20 R21 R24 R31 R33 R68 R69 R77 R78 R79 R80 R81 R83

R105 R108 R111 R112 R113 R114 R121 R122 R317 R318 RD29 RD30 RD31

RD32 RD33 RD34 RDS29 RDS30 RDS31 RDS32 RDS33 RDS34

Yageo Corporation

Yageo Corporation

Yageo Corporation

Yageo Corporation

Yageo Corporation

Yageo Corporation

Yageo Corporation

Yageo Corporation

Yageo Corporation

Yageo Corporation

Yageo Corporation

Yageo Corporation

Yageo Corporation

Yageo Corporation

Yageo Corporation

Yageo Corporation

Yageo Corporation

Yageo Corporation

Philips Semiconductors

ROHM CO.,LTD

R7 R15 R16 R17 R109 R171 R173 R176 R179 R181 R185 R194 R199 R203

R206 R210 R214 R267 R277 R312 R323 R329

R298 R307

RD3 RD4 RD5

R116

R293

R274 R299

R8 R9 R13 R59 R60 R61 R63

R182 R188 R190 R197 R315 RD14

R28 R32 R172 R174 R177 R180 R183 R186 R191 R196 R201 R204 R207 R212

R216 R296 R331

R153

R82 R115 R117 R157

RD9 RDS9

R25 R29 R278 R328

R88 R129 R333 R334 R336

R290 R332

R102 R103 R104 R146 R147 R149 R167 R169 R358 R359 R360 R361 R362

R363 R364 R365 R366 R367 R368 R375

R280

R302

D4 D8 D11 D12 D13 D14 D15 D16 D17 D18 D19 D20 D21 D22 D23 D24 D26

D28 D29 D30 D31 D32

D1 D2 D3 D25 D34 D35 D36 D37 D38 D39 D40 D41 D42 D43 D45 D50 D51

D52 D54 D55 D57 D58

WINBOND ELECTRONICS CORP. U3

G-Link Technology U25 U26 U27

6-7



Module Name:

Supplier Name:

Module P/N:

Revision:

Image Board

Sampo

DPWB11393-1GGWS

S11393-05-1A1

Part # Part Number Name Part Description

VSI74HC221D---A IC- Dual Non-Retriggerable

Monostable Multivibrator with Reset

VSI74HC4538D--A

VSI74HCT04D---A

VSI74LVC157---A

VSI74LVT14----A

VSI78M05A-----A

VSIA5-32-10VC4D

IC- Dual Retriggerable Precision

Monostable Multivibrator

IC- Inverter

IC- Multiplexer

VSI74LVC244ADBA IC- Octal Buffer/Line Driver

VSI74LVT04----A IC- Hex Inverter

IC- Hex Inverter

IC- 5 Voltage Regulator

VSIAD9884AKS--D

VSIAT24C21-----

IC- In System Programmable High

Density PLD

IC- Analog Interface

IC- EEPROM

VSIBA033------A

VSIBA033LBSG--A

VSIBA7657F----A

VSIDS90C385---A

VSIEM83010-----

VSIHD6413079F-D

IC- Low Dropout 3.3 Voltage

IC- 3.3 Voltage Regulator

IC- Input Selector Switch

IC- LVDS Transmitter

IC- I/O Expander

IC- CPU

VSIHEF4053BT--A

VSIHIN232CB-T-A

VSIICS9161A---A

VSIIP00C713---D

VSILA7213------

VSILM1085ISX-3A

IC- Analogue

IC- RS232 IC

IC- Programmable Freq. IC

IC- Color Image Enlargement

Reduction LSI

IC- Monolithiclinear

IC- 3.3 Voltage Regulator

VSILM1085ISX-AA IC- 2.5 Voltage Regulator

VSIM24C16WBN6-IC- EEPROM

VSIM52055FP---A

VSIM52347FP---A

VSIMTV130-----A

IC- 3-Channel Analog Switch

IC- Sync Signal Processor

IC- OSD IC

74HC221D

74HC4538D

74HCT04D

74LVC157

74LVC244ADB

74LVT04

74LVT14

78M05A

A5-32-10VC4

AD9884AKS

AT24C21

BA033

BA033LBSG

BA7657F

DS90C385

EM83010

HD6413079F

HEF4053BT

HIN232CB

ICS9161A

IP00C713

LA7213

LM1085ISX-3

LM1085ISX-A

M24C16WBN6

M52055FP

M52347FP

MTV130

1

1

1

1

1

1

2

9

1

2

1

1

1

4

2

1

2

1

1

1

2

1

3

2

3

1

1

Quantity per

Assembly

1

Supplier Name

Philips Semiconductors / Texas Instruments

IC12

Ref Designator

Philips Semiconductors / Texas Instruments IC11





U67

U15 U22

U18 U19 U20 U21

U6 U24


ST Microelectronics

LATTICE SEMICONDUCTOR CORPORATION

U30

IC9

U1

ANALOG DEVICES U29

ST Microelectronics / Atmel Corporation U33 U35

ROHM CO.,LTD

ROHM CO.,LTD

ROHM CO.,LTD

National Semiconductor

EMC CORPORATION

Hitachi SEMICONDUCTOR

U31 U52 U53 U54 U55 U60 U61 U62 U63

U28

U34

U66

U8

U4

Philips Semiconductors / Texas Instruments IC13 U42

FAIRCHILDI SEMICONDUCTOR U12

INTEGRATED CIRCUIT SYSTEMS U16

I-CHIPS TECHNOLOGY INC.

U23

SANYO SEMICONDUTORS IC4 IC6 IC10

NATIONAL SEMICONDUCTORS U56 U57

NATIONAL SEMICONDUCTORS U58 U59

ST Microelectronics

MUTSUBISHI ELECTRIC CORPORATION

U7

MUTSUBISHI ELECTRIC CORPORATION

IC2 IC3 IC7

U64

MYSON TECHNOLOGY INC.

U11

6-8

VER1.0



Module Name:

Supplier Name:

Module P/N:

Revision:

Image Board

Sampo

DPWB11393-1GGWS

S11393-05-1A1


VSIPNLTVP6730-D IC- Progressive

VSIS80845ANUP-A IC- Voltage Detector

VSISII161BCT--D

VSISM84L512K--D

IC- DVI Interface IC

IC- SGRAM

VSITA1276AF---D

VSITA8851CN----

IC- Video/Chroma/Deflection

IC- Audio/Video Switch

VST2SA1037KQ--A Transistor

VST2SC1213C---P Transistor

VST2SC2412KBQ-A Transistor

VSTBSN20------A Transistor

VSTDTC144EKA--A Transistor

VSZRLZ7.5B----A Zener Diode


PNLTVP6730

S80845ANUP

SII161BCT

SM84L512K

TA1276AF

TA8851CN

2SA1037KQ

2SC1213C

2SC2412KBQ

BSN20

DTC144EKA

RLZ7.5B

VER1.0

Quantity per

Assembly

1

1

3

1

30

1

4

2

1

Supplier Name

Trident Technologies Inc.

Seiko Instrunets Taiwan Inc.

SILICON IMAGE

SILICOM MAGIC CORP.

TOSHIBA CORPORATION

TOSHIBA CORPORATION

ROHM CO.,LTD

HITACHI SEMICONDUCTOR

ROHM CO.,LTD

4

6

1


ROHM CO.,LTD

ROHM CO.,LTD

Ref Designator

U45 U46

U5

U32

U48 U49 U50 U51

U43

IC1

Q31 Q34 Q39

Q48

Q1 Q2 Q3 Q4 Q7 Q8 Q9 Q10 Q11 Q12 Q14 Q15 Q16 Q17 Q18 Q19 Q25 Q26

Q27 Q28 Q29 Q30 Q32 Q33 Q35 Q36 Q37 Q38 Q43 Q44

Q5 Q6 Q20 Q21

Q40 Q41 Q42 Q45 Q46 Q47

ZD1

6-9



Module Name:

Supplier Name:

Module P/N:

Revision:

Part #

QPWB11398-1G---

QCNCP1552-1----

QCNCP1622-1----

AC Master Power Switch Board

Sampo

DPWB11398-1G---

OR

Part Number Name

PCB Bareboard

Connector

Connector


POWER SWITCH B/O

3PIN

4PIN

Quantity per

Assembly

1

2

1

Supplier Name Ref Designator

Chien Wey Electronic Industrial Co., LPCB


AC IN, AC OUT


SW

VER1.0

6-10



Module Name:

Supplier Name:

Module P/N:

Revision:

Part #

PRDAA0116-1G--I

PRDAA0140-1P--G

QPWB11372-1G-2S

RFILN1011-1----

TLABD1145-1B---

VCEACU1CG107MNP

VCEACU1CG226MNP

VCEACU1CG337MNP

VCEABN1CG476MNA

VCEACU1CG477MNP

VCEACU1EG477MNP

VCEACU1HG105MNP

VCEACU1HG106MNP

Audio Amplifier Board

Sampo

DPWB11372-1G-S-

A11372-02-100


HEAT SINK IC2 USE

U2 USE Heat Sink

PCB

Amp Output Filter

Barcode label

Aluminum Elect.

Aluminum Elect.

Aluminum Elect.

Aluminum Elect.

Aluminum Elect.

Aluminum Elect.

Aluminum Elect.

Aluminum Elect.


1000P/100V

100uF

22uF

330uF

47uF

470uF

470uF

1uF

10uF

16V

16V

16V

16V

16V

25V

50V

50V

±20%

±20%

±20%

±20%

±20%

±20%

±20%

±20%

VCEACU1HG224MNP

VCEACU1HG225MNP

VCEACU1HG475MNP

Aluminum Elect.

Aluminum Elect.

Aluminum Elect.

VCEACU1VG107MNP

VCEACU1VG108MNP

VCEACU1VG227MNP

VCICHN1HH221J-

VCLFCN1HY224M-A

Aluminum Elect.

Aluminum Elect.

Aluminum Elect.

Temp. Comp. Ceramic

High Diel. Ceramic

0.22uF

2.2uF

4.7uF

100uF

1000uF

220uF

220PF

0.22uF

50V

50V

50V

35V

35V

35V

50V

50V

VER1.0

±20%

±20%

±20%

±20%

±20%

±20%

±10%

±20%

6-11

Quantity per

Assembly

1

1

1

2

1

4

3

1

2

3

1

1

15

Supplier Name

Base Strong Industrial Co., Ltd.

Base Strong Industrial Co., Ltd.


Murata Mfg. Co., Ltd.










2

4

13

1

2

1

2

3







Yageo Corporation

Yageo Corporation

Ref Designator

PCB (AUDIO)

F1 F2

C30 C31 C42 CR10

C1 C8 C14

C54

CS1

C28

C52 C59

C36 CR6 CR9

C3 C5 C7 C12 C62 C63 C65

C66 C67 C68 CR4 CR5 CR15

CS2 CS3

C16 C40

C2 C4 C64 CR1

C9 C11 C17 C18 C23 C24 C25

C33 C34 C37 C41 CR13 CR16

C53

C49 C71

C43

C6 C13

C51 C56 C72



VCLFHN1AY105Z-A

VCLFHN1EY104Z-A

VCLRCN1CB224K-A

VCLRCN1CB474K-A

VCLRHN1CB104K-A

VCLRHN1CB273K-A

High Diel. Ceramic

High Diel. Ceramic

High Diel. Ceramic

High Diel. Ceramic

High Diel. Ceramic

High Diel. Ceramic

VCLRHN1CB333K-A

VCLRHN1CB473K-A

VCLRHN1HB102K-A

VCLRHN1HB103K-A

VCLRHN1HB153K-A

VCLRHN1HB222K-A

VCLRHN1HB332K-A

VCLRHN1HB392K-A

VCLRHN1HB471K-A

VCLRHN1HB472K-A

VCMECU1JG474J-P

VCNCP0302-EJST-

VCNCP030A-EJST-

VCNCP030C-EJST-

VCPELU1HG104J-P

VCPELU1HG223J-P

VL-DH120K0000-U

VRCPT4--2R2J-U

VRMHNVG--000J-A

VRMHNVG--100J-A

VRMHNVG--101J-A

VRMHNVG--102J-A

High Diel. Ceramic

High Diel. Ceramic

High Diel. Ceramic

High Diel. Ceramic

High Diel. Ceramic

High Diel. Ceramic

High Diel. Ceramic

High Diel. Ceramic

High Diel. Ceramic

High Diel. Ceramic

Metal Ploy. Film

Connector

Connector

Connector

Polyester Film

Polyester Film

Peaking Coil

Metel Film

Metel Film

Metel Film

Metel Film

Metel Film

0.033uF

0.047uF

1000PF

0.01uF

0.015uF

2200PF

3300PF

3900PF

470PF

4700PF

0.47uF

2 PIN

10 PIN

12 PIN

0.1uF

0.022uF

12uH

2.2

0

10

100

1K

1uF

0.1uF

0.22uF

0.47uF

0.1uF

0.027uF


10V

25V

16V

16V

50V

16V

+80%~-20%

+80%~-20%

±10%

±10%

±10%

±10%

Quantity per

Assembly

1

2

2

6

8

Supplier Name

Yageo Corporation

Yageo Corporation

Yageo Corporation

Yageo Corporation

Yageo Corporation

1 Yageo Corporation

16V

16V

50V

50V

50V

50V

50V

50V

50V

50V

63V

50V

50V

1/4W

1/16W

1/16W

1/16W

1/16W

±10%

±10%

±10%

±10%

±10%

±10%

±10%

±10%

±10%

±10%

±5%

±5%

±5%

±10%

±5%

±5%

±5%

±5%

±5%

1

1

2

1

3

1

2

1

1

3

2

3

2

2

1

1

2

1

1

1

2

1

Lipers Enterprise Co., Ltd.

Yageo Corporation

Yageo Corporation

Yageo Corporation

Yageo Corporation

Yageo Corporation

Yageo Corporation

Yageo Corporation

Yageo Corporation

Yageo Corporation

Mylar Elctronics Co., Ltd.






Chilisin Electronics Corp.

Yageo Corporation

Yageo Corporation

Yageo Corporation

Yageo Corporation

Yageo Corporation

VER1.0

Ref Designator

C55

C29 C45 C46 C50

CR12 CR17

C21 C27 C32 C35 CR2 CR11

C22 C44 C69 C70 CR8 CR19

CR29 CS4

CR20

C20 C39

CS5

C15 C48

CR7 CR28 CR99

CR26

CR14 CR18 CR27

C19 C38

C58 C61

CR25

CR21 CR23 CR30

CR24

BT1 BT2

JA2

JA1

CR22

C57 C60

L1

R55

R30

R33 R34

RR22

6-12



VRMHNVG--103J-A Metel Film

VRMHNVG--104J-A

VRMHNVG--123J-A

VRMHNVG--124J-A

VRMHNVG--152J-A

VRMHNVG--222J-A

VRMHNVG--223J-A

VRMHNVG--224J-A

VRMHNVG--272J-A

VRMHNVG--273J-A

VRMHNVG--333J-A

VRMHNVG--391J-A

VRMHNVG--392J-A

VRMHNVG--472J-A

VRMHNVG--473J-A

Metel Film

Metel Film

Metel Film

Metel Film

Metel Film

Metel Film

Metel Film

Metel Film

Metel Film

Metel Film

Metel Film

Metel Film

Metel Film

Metel Film

VRMHNVG--563J-A

VRMHNVG--682J-A

VRMHNVG--822J-A

VRMHNVG--823J-A

VRMMTV2--1R0J-U

VRMMTV2--2R2J-U

VRMMTV2--8R2J-U

VRNMK01--R22J--

VRNMK03--820J--

VSDRLS4148----A

Metel Film

Metel Film

Metel Film

Metel Film

Metel Film

Metel Film

Metel Film

Metal Oxide Film

Metal Oxide Film

Diode

10K


1/16W ±5%

Quantity per

Assembly

20

Supplier Name

Yageo Corporation

1/16W

1/16W

1/16W

1/16W

1/16W

1/16W

1/16W

1/16W

1/16W

1/16W

1/16W

1/16W

1/16W

1/16W

1/16W

1/16W

1/16W

1/16W

1/2W

1/2W

1/2W

1W

3W

100K

12K

120K

1.5K

2.2K

22K

220K

2.7K

27K

33K

390

3.9K

4.7K

47K

56K

6.8K

8.2K

82K

1

2.2

8.2

0.22

82

±5%

±5%

±5%

±5%

±5%

±5%

±5%

±5%

±5%

±5%

±5%

±5%

±5%

±5%

±5%

±5%

±5%

±5%

±5%

±5%

±5%

±5%

±5%

2

4

6

4

2

2

2

6

1

4

3

1

1

12

1

1

2

2

2

1

1

4

1

6

Yageo Corporation

Yageo Corporation

Yageo Corporation

Yageo Corporation

Yageo Corporation

Yageo Corporation

Yageo Corporation

Yageo Corporation

Yageo Corporation

Yageo Corporation

Yageo Corporation

Yageo Corporation

Yageo Corporation

Yageo Corporation

Yageo Corporation

Yageo Corporation

Yageo Corporation

Yageo Corporation

Yageo Corporation

Yageo Corporation

Yageo Corporation

Yageo Corporation

Yageo Corporation

ROHM CO.,LTD

6-13

VER1.0

Ref Designator

R13 R16 R17 R18 R19 R21 R41

R50 R51 R59 RR1 RR3 RR4

RR10 RR18 RR28 RR30 RR32

RS6 RS7

RR11 RR17 RR29 RR31

RR25 RR27

R1 R2

R3 R7 R43 RR8

R27 R28 R56 RR13 RR20

RR21

RS1 RS2

R5 R8

R24 R35 R39 R40 RR24 RR26

R48

RR15

RR7

R12 R20 RR5 RR12

R15 R23 RR16

R4 R6 R9 R10 R11 R25 R52

R53 RR14 RS3 RS4 RS5

RR19

R45 R47 RR9 RR23

R26 R32

R46

R49

R29 R31

R42 R44

R38

R57

D1 DR3 DR4 DR5 DR6 DR7



VSIHEF4052BT--A

VSILM2940CT12--

VSINJM2178L----

VSINJM4558M---A

VSINJW1132-----

VSITC4W53FU---A

VSITDA2616-----

VST2SA1037KQ--A

VST2SC2412KBQ-A

VSTDTC144EKA--A

IC- Dual 4-Channel Analogue

Multiplexer/ Demultiplexer

IC- Voltage Regulator

IC- SRS 3D Surround Audio

Processor

IC- Operational Amplifier

IC- Sound Processor (BBE)

IC- SMT Analogue Switch

IC- Sound Amplifier

Transistor

Transistor

Transistor

XBPSD30P10000--

XJASD30P08000--

XJJSD30P10000--

U2 USE Screw

FOR PRDAA0116-1G--I*2

IC2 USE Screw

Part Description Quantity per

Assembly

1

Supplier Name

PHILIPS SEMICONDUCTORS

1

1

1

3

3

1

2

1

14

National semiconductor

NEW JAPAN RADIO CO.,LTD



TOSHIBA SEMICONDUTORS


ROHM CO.,LTD

ROHM CO.,LTD

ROHM CO.,LTD

1

2

2

Kou Fei Screw Industrial Co., Ltd.

Shi Ho Screw Industrial Co., Ltd.

Kou Fei Screw Industrial Co., Ltd.

VER1.0

Ref Designator

ICA3

U2

ICR1

ICS1 U1

IC1

ICA1 ICA2 ICS2

IC2

Q6

Q1 Q2 Q7

Q3 Q5 Q8 Q9 Q10 Q11 Q12

Q13 Q14 Q15 Q16 QR1 QR2

QR3

6-14



Module Name:

Supplier Name:

Module P/N:

Revision:

Front Button Control Board

Sampo

DPWB11372-1G-K2

K2

Part #

QPWB11372-1G-4K

QSW-A1225-11-1P

VSI93M2AKF-----

VSPHB5-30YGC---

PCB


Tact Switch

IC- Infrared Receiver

LED

VRMHNVG-1501F-A

VRMHNVG-3301F-A

VRMHNVG-7501F-A

VRMHNVG-6800F-A

VRMHNVG-1001F-A

Metel Film

Metel Film

Metel Film

Metel Film

Metel Film

VRMHNVG--471J-A

VRMHNVG-8201F-A

VRMHNVG--821J-A

VRMHNVG--4R7J-A

Metel Film

Metel Film

Metel Film

Metel Film

VCLRHN1HB471K-A High Diel. Ceramic


VCTAEN1AB107M-A Tantalum

VCNCP0316-EJSTConnector

VSDRLS4148----A

VSZUDZ5.1B----A

Diode

Diode

1.5K

3.3K

7.5K

680

1K

470

8.2K

820

4.7

470PF

1000PF

100uF

6 PIN


93M2AKF

1/16W

1/16W

1/16W

1/16W

1/16W

1/16W

1/16W

1/16W

1/16W

50V

50V

10V

RLS4148

MTZJ7.5B

1

1

1

1

1

1

1

1

2

1

2

2

1

Quantity per

Assembly

1

6

1

1

2

2

Supplier Name Ref Designator

EISD Enterprise Co., Ltd. PCB (KEY)

Hua Jie (Taiwan) Corp.

S3 S4 S5 S6 S7 S8

Imperial Star Corp.

U39

Huey Jann Electronics

Industry Co., Ltd.

Yageo Corporation

LD1

R167 R171

Yageo Corporation

Yageo Corporation

Yageo Corporation

Yageo Corporation

Yageo Corporation

Yageo Corporation

Yageo Corporation

Yageo Corporation

Yageo Corporation

Yageo Corporation

Kentec Vision Corp.

Chia-Soon Electronics

Co., Ltd.

ROHM CO.,LTD

ROHM CO.,LTD

R168 R174

R169

R170

R172 R173

R175

R176

R177

R178

C236

C235

C237

JA3

D100,D101

ZD100,ZD101

VER1.0

6-15



Module Name:

Supplier Name:

Module P/N:

Revision:

Part #

AV w/ Tuner Module Board

Sampo

DPWB11396-1G-T-

T11396-00-100


QCNCP1615-132--

QJAKM1076-1---A

QJAKP1147-1---A

QJAKP1158-1-6-C

QJAKP1159-1-4-C

Connector

Pin jack

Pin jack

Pin jack

Pin jack

QJAKP1177-1----

QJAKS1006-1DU--

Pin jack

Phone jack

QJUM-1039-1540U

QPLGR1218-101--

Jumper

QPWB11396-1G--PCB

RCHOM1016-1202A Choke

RUNTZ1036-1---PIF

RVRSH6014-1103SemiVar. Resistor

TLABD1145-1B--Barcode label

VCEACU1CG107MNP Aluminum Elect.




VCEACU1HG104MNP Aluminum Elect.




(J15A-F)

TUJH9-805A

10K

100uF

22uF

220uF

47uF

0.1uF

1uF

10uF

2.2uF


(J12A-D, J17A-

D, J24A-D)

16V

16V

16V

16V

50V

50V

50V

50V

±20%

±20%

±20%

±20%

±20%

±20%

±20%

±20%

6-16

1

6

1

1

3

5

1

1

3

1

1

1

1

1

1

1

1

Quantity per

Assembly

2

Supplier Name

Oupiin Enterprise Co., Ltd.

1

1

1

Jye Tai Precision Industrial Co., Ltd.

MSK Technology Corp.

Gaoma Engineering Co., Ltd.

3 Gaoma Engineering Co., Ltd.

Mina Information Co., Ltd.

Jye Tai Precision Industrial Co., Ltd.

MSK Technology Corp.


Frontier Electronics Co., Ltd.

Forward Electronics Co. Ltd.

Heng Ya Electrical Industry Co., Ltd.










VER1.0

Ref Designator

JP1 JP2

J5

J40

J15

J12 J17 J24

S1A/S1B

J3

J69 R201 R225

RCA Wire

PCB (AV)

L241

TU202

VR201

C226

C216

C224

C221

C215

C204 C205 C206 C209 C210

C202 C203 C207

C222 CE29 CE30 CE31 CE32







VCICHN1HH101J-A Temp. Comp. Ceramic



VCKBDU2HY103K-High Diel. Ceramic

VCLRCN1HB104K-A High Diel. Ceramic

VCLFHN1EY104Z-A High Diel. Ceramic

VCPELU1HG473J-P Polyester Film



VCLRHN1HB561K-A Temp. Comp. Ceramic

VCPELU1HG104J-P Polyester Film

VRCPTV2--101J-U

VRCPTV4--2R2J-U

Carbon Film

Carbon Film

VRCPTV6--362G-U Carbon Film

VRMBNV8--000J-A Metel Film







3.3uF

0.47uF

4.7uF

4.7uF

100PF

220PF

5.6K

0.01uF

0.1uF

0.1uF

0.047uF

1000PF


50V

50V

160V

50V

50V

±20%

±20%

±20%

±20%

±5%

50V ±5%

50V

500V

±5%

±10%

50V ±10%

25V +80%~-20%

50V

50V

±5%

±10%

Quantity per

Assembly

1

Supplier Name


1

1



1

7


Yageo Corporation

2

1

1

1

1

1

16

Yageo Corporation

Yageo Corporation

MMC Electronics Taiwan Co., Ltd.

Yageo Corporation

Yageo Corporation


Yageo Corporation

0.01uF

560PF

0.1uF

100

2.2

3.6K

0

50V

50V

50V

1/2W

1/4W

1/6W

1/8W

±10%

±5%

±5%

±5%

±5%

±2%

±5%

1

1

1

1

2

1

25

Yageo Corporation

Yageo Corporation


Yageo Corporation

Yageo Corporation

Yageo Corporation

Yageo Corporation

0

100

1K

1.2K

150

1.5K

1/16W

1/16W

1/16W

1/16W

1/16W

1/16W

±5%

±5%

±5%

±5%

±5%

±5%

6-17

4

1

2

1

4

5

Yageo Corporation

Yageo Corporation

Yageo Corporation

Yageo Corporation

Yageo Corporation

Yageo Corporation

VER1.0

Ref Designator

C208

C220

C243

C219

C223 CE12 CE14 CE15 CE16

CE17 CE18

C211 C212

C245

C242

C244

C241

C218

CE1 CE2 CE3 CE4 CE5 CE6

CE7 CE8 CE9 CE10 CE11

CE13 CE25 CE26 CE27 CE28

C225

C245

C213 C214

L201

R217

R207

FE1 FE2 FE3 FE4 FE5 FE6 FE7

FE8 FE9 FE10 FE11 FE12 FE13

FE14 FE15 FE16 FE17 FE18

FE19 FE20 FE21 FE30 FE31

R202 R205 R214 R215

R206 R210 R216 R220 R223

R203 R242 R246 R248

R221

R208 R209








VRMHVG-5601F-A Metel Film



VRPTV6--133G-L

VSDRLS4148----A

VSINE555D-----A

Metel film

Diode

IC- Timer

VSINJM7805FA---

VSIUPC1854ACT--

IC- Positive Voltage Regulator

IC- US MTS Processing LSI

VSIUPC574J----IC- Voltage Regulator

VST2SC2412KBQ-A Transistor

VST2SC2482-----

VSZUDZ5.1B----A

VSZUDZ6.8B----A

Transistor

Zener Diode

Zener Diode

VTU-TELH9-819ATuner

VWVA5TMW1D-H6B- GND/GND wire 3 3

27K

330

3.9K

39K

47K

1/16W

1/16W

1/16W

1/16W

1/16W

5.6K

680

68K

13K

RLS4148

NE555D

NJM7805FA

UPC1854ACT

UPC574J

2SC2412KBQ

2SC2482

UDZ5.1B

UDZ6.8B

TELH9-819A

1/16W

1/16W

1/16W

1/6W


±5%

±5%

±5%

±5%

±5%

±10%

±5%

±5%

±2%

1

3

6

1

1

1

1

1

1

2

1

1

1

1

Quantity per

Assembly

2

1

1

Supplier Name

Yageo Corporation

Yageo Corporation

Yageo Corporation

2

13

Yageo Corporation

Yageo Corporation

Yageo Corporation

Yageo Corporation

Yageo Corporation

Yageo Corporation

ROHM CO.,LTD

PHILIPS SEMICONDUCTORS


NEC CORPORATION

NEC CORPORATION

ROHM CO.,LTD

TOSHIBA CORPORATION

ROHM CO.,LTD

ROHM CO.,LTD

Forward Electronics Co. Ltd.

VER1.0

Ref Designator

R241 R244

R245

R204

R212 R213

RE3 RE4 RE5 RE7 RE8 RE9

RE10 RE11 RE12 RE14 RE25

R243

R219

R218

R211

D241 D242

IC241

IC202

IC203

ZD241

Q201

Q241

ZDA1 ZDA2 ZDA3

ZDA4 ZDA5 ZDA6 ZDA7

ZDA8 ZDA9

TU201

6-18


Supplier Approved Vendor List_SAMPO

Remark: 1. The vendor is qualified by Sampo RD, QA and Purchasing Department.

2. The part is qualified by Sampo RD Department.

VER1.0

No.

Vendor Name

1 ADD Microtech Corp.

2 ANALOG DEVICES

3 Asahi Glass Co.

4 Base Strong Industrial Co., Ltd.

5 Best Enterprise Co., Ltd.

6 Cation Industry Co., Ltd.

7 Cheng Fa Plastic Mfg Co., Ltd.

8 Chia-Soon Electronics Co., Ltd.

9 Chien Wey Electronic Industrial Co.,

Ltd.

10 Chihneng Packing Co., Ltd.

11 Chilisin Electronics Corp.

12 Digimax Innovative Products Ltd.

13 Diing Yih Enterprise Co., Ltd.

14 EISD Enterprise Co., Ltd.

15 EMC CORPORATION

16 Energie Electronic Co., Ltd.

Taiwan Distributor Name

TEX YEA CORPORTION

EPCO TECHNOLOGY CO.,LTD.

Lim Shang Hang Temper-Safe Glass Factory

Co., Ltd.

-

Kuen-Chang Optic Corp.

-

-

-

-

-

-

-

-

-

-

Vendor/ Taiwan Distributor Address

13Fl., No. 49, Sec. 3, Minsheng E. Rd., Sungshan

Chiu, Taipei, Taiwan 105, R.O.C.

6Fl., No. 37, Lane 513, Rueiguang Rd., Neihu Chiu,

Taipei, Taiwan 114, R.O.C.

46, Ta Yeh South Road, Hsiao Kang District,

Kaohsiung, 812 Taiwan, R.O.C.

No. 53, Chingshiang St., Tucheng City, Taipei,

Taiwan 236, R.O.C.

1Fl., No. 143, Dadau Rd., Shinyi Chiu, Taipei,

Taiwan 110, R.O.C.

No. 59, Lane 530, Sec. 1, Kuo-Gi Road, Taoyuan,

Taiwan, R.O.C.

No. 555, Sec. 1, Wanshou Rd., Gueishan Shiang,

Taoyuan, Taiwan 333, R.O.C.

No. 145-1, Ankang Rd., Neihu Chiu, Taipei,

Taiwan 114, R.O.C.

No. 12-4, Dunglin Rd., Shiaugang Chiu, Kaohsiung,

Taiwan 812, R.O.C

No. 7, Lane 325, Jungjeng Rd., Banchiau City,


No. 29, Lane 301, Deshing Rd., Hukou Shiang,

Hsinchu, Taiwan 303, R.O.C.

4Fl.-4, No. 129, Lane 235, Bauchiau Rd., Shindian

City, Taipei, Taiwan 231, R.O.C.

No. 32-1, Lane 23, Yian Rd., Junghe City, Taipei,

Taiwan 235, R.O.C.

1Fl., No. 52-2, Beinei St., Shulin City, Taipei,

Taiwan 238, R.O.C.

6Fl., No. 92, Baujung Rd., Shindian City, Taipei,

Taiwan 231, R.O.C.

6-1Fl., No. 142, Sec. 2, Nangang Rd., Nangang


Zip Code

105 IC

Commodity Supplied

114

812

236

110

330

333

114

812

220

303

231

235

238

231

115

IC

Glass Filter

Heat sink

Packing material

PCB insertion

Bezel

Connector, Socker

PCB

Packing AD.

Coil

Elec. accessory

Printing

PCB

IC

Capacitor

6-19


No.

Vendor Name

17 FAIRCHILDI SEMICONDUCTOR

18 Forward Electronics Co. Ltd.

19 Frontier Electronics Co., Ltd.

20 G.I.S. Enterprise Co., Ltd.

21 Gaoma Engineering Co., Ltd.


TECO ENTERPRISE CO.,LTD.

-

-

-

-

22 G-Link Technology PROHUBS INTERNATIONAL CORP

23 Goldfull Electronics &

Telecommunications Corp.

24 Heng Ya Electrical Industry Co., Ltd.

UCOME TEK CO.,LTD

-

Forward-Tech Electronics, Ltd.

25 Hirose

26 Hitachi SEMICONDUCTOR

27 Hua Jie (Taiwan) Corp.

NISSEI SANGYO CO.,LTD. TAIPEI

BRANCH

-

28 Huey Jann Electronics Industry Co., Ltd.

29 I-CHIPS TECHNOLOGY INC.

Micromax Technology

-

30 Imperial Star Corp.

-

31 In Hana Industrial Co. Ltd.

-

32 INTEGRATED CIRCUIT SYSTEMS MAXTEK TECHNOLGY CO.,LTD.

33 JST ELECTRONIC PRODUCTS

MFG.CO.,LTD

34 Jye Tai Precision Industrial Co., Ltd.

35 Jyh Dong Co., Ltd.

-

-


10Fl., No. 292, Minsheng W. Rd., Datung Chiu,


No. 393, Sec. 1, Jungjeng Rd., Sanshia Jen, Taipei,

Taiwan 237, R.O.C.

4Fl., No. 48, Minchiuan Rd., Shindian City, Taipei,

Taiwan 231, R.O.C.

No. 93-15, Luju Tsuen, Luju Shiang, Taoyuan,

Taiwan 338, R.O.C.

No. 27, Lane 469, Liancheng Rd., Junghe City,


9Fl., No. 77, Sec. 1, Shintai 5th Rd., Shijr City,


5Fl., No. 132, Lide St., Junghe City, Taipei, Taiwan

235, R.O.C.

3Fl., No. 542-2, Jungjeng Rd., Shindian City,


4Fl., No. 118, Hougang St., Shrlin Chiu, Taipei,

Taiwan 111, R.O.C.

10Fl., No. 44, Sec. 2, Jungshan N. Rd., Jungshan


No. 231, Lungshou St., Taoyuan City, Taoyuan,

Taiwan 330, R.O.C.

No. 27, Lane 466, Sec. 2, Gangnan Rd., Wuchi Jen,

Taichung, Taiwan 435, R.O.C.

3Fl., No. 103, Sec. 2, Jioutzung Rd., Neihu Chiu,


6Fl.-4, No. 27, Lane 61, Sec. 1, Guangfu Rd.,

Sanchung City, Taipei, Taiwan 241, R.O.C.

No. 120, Shinshing Rd., Bade City, Taoyuan,

Taiwan 334, R.O.C.

3Fl.-2, No. 197, Sec. 4, Nanjing E. Rd., Sungshan


No. 145-1, Ankang Rd., Neihu Chiu, Taipei,

Taiwan 114, R.O.C.

5Fl.-3, No. 8, Lane 609, Sec. 5, Chungshin Rd.,

Sanchung City, Taipei, Taiwan 241, R.O.C.

No. 20, Lane 169, Fuhua St., Jungli City, Taoyuan,

Taiwan 320, R.O.C.

Zip Code

103 IC

VER1.0


237

231

338

235

221

235

231

111

104

330

435

114

241

334

105

114

241

320

Tuner unit

Choke

Poly foam

Socket

IC

Power cord

Resistor

Conector

Transistor, IC

Switch

LED

IC

IC

Speaker

IC

Connector

Connector

Printing

6-20


No.

Vendor Name

36 KDS Taiwan Electronics Corp.

37 Kentec Vision Corp.

38 Kou Fei Screw Industrial Co., Ltd.

39 LATTICE SEMICONDUCTOR

CORPORATION

40 Matsushita Electric (Taiwan) Ltd.

41 Maxi Electronic Enterprise Co., Ltd.

42 Mina Information Co., Ltd.

43 MMC Electronics Taiwan Co., Ltd.

44 MOLEX

45 MSK Technology Corp.

46 Murata Mfg. Co., Ltd.

47 MUTSUBISHI ELECTRIC

CORPORATION

48 Mylar Elctronics Co., Ltd.

49 MYSON TECHNOLOGY INC.

50 National Semiconductor

51 National Semiconductor

52 NEC CORPORATION

53 NEW JAPAN RADIO CO.,LTD

54 Oupiin Enterprise Co., Ltd.

55 Philips Semiconductors


-

CHIEFTAIN ENTERPRISES CO.,LTD.

-

PROMASTER TECHNOLOGY CROP.

-

-

MINA INFORMATION CO.,LTD.

MMC ELECTRONICS TAIWAN CO.,LTD.

SETSUYO

ARROW\ALLY,INC.

SILTRONTECH Electronics Corp.

TAIWAN SATORI CO.,LTD.

CASSNA INTERNATIONAL CO.,LTD.

-

-

-

-

-

-

PHILIPS TAIWAN LTD.


6Fl., No. 69, Jilin Rd., Jungshan Chiu, Taipei,

Taiwan 104, R.O.C.

6Fl., No. 726, Sec. 6, Jungshan N. Rd., Shrlin Chiu,


No. 12, Lane 195, Huacheng Rd., Shinjuang City,


16Fl., No. 182, Sec. 2, Duenhua S. Rd., Daan Chiu,


6Fl., No. 550, Sec. 4, Jungshiau E. Rd., Shinyi Chiu,


3Fl., No. 111, Sec. 3, Chungshin Rd., Sanchung City,


17Fl.-2, No. 327, Sec. 2, Fushing S. Rd., Daan Chiu,


No. 20, Jianguo Rd., Tanzi Shiang, Taichung,

Taiwan 427, R.O.C.

1Fl., No. 49, Lane 264, Tzuenshian St., Beitou Chiu,


No. 62, Sec. 2, Renhe Rd., Dashi Jen, Taoyuan,

Taiwan 335, R.O.C.

26-10 TENJIN 2-

5Fl., No. 105, Wugung 3rd Rd., Wugu Shiang,


6Fl.-2, No. 135, Sec. 4, Bade Rd., Sungshan Chiu,


No. 6, Alley 10, Lane 51, Sec. 3, Jungshiau E. Rd.,

Daan Chiu, Taipei, Taiwan 106, R.O.C.



11F, No. 20, Alley 1, Lane 768, Sec. 4, Pate Rd.,

Nangang Chiu, Taipei, Taiwan 115, R.O.C.

Suite 2108, 21Fl., No. 333, Sec. 1, Jilung Rd.,

Shinyi Chiu, Taipei, Taiwan 110, R.O.C.

9Fl., No. 415, Sec. 4, Shinyi Rd., Shinyi Chiu,


No. 302, Changshing Rd., Bade City, Taoyuan,

Taiwan 334, R.O.C

28Fl., No. 66, Sec. 1, Jungshiau W. Rd., Jungjeng


Zip Code

104

111

242

103

110

241

106

427

112

335

248

105

106

221

115

110

110

334

100

Capacitor

Scraw

IC

Remote control

Connector

Connector

Capacitor

Socket

Connector

Core, Filter

IC

Capacitor

IC

IC

IC

IC

IC

Connector

Diode, IC

VER1.0


Crystal

6-21


No.

Vendor Name

56 Philips Semiconductors

57 Philips Semiconductors / Texas

Instrumenis

58 R.U.G. Isolator (Taiwan) Ltd.

59 ROHM CO.,LTD

60 ROHM CO.,LTD

61 Samsung

62 SANYO SEMICONDUTORS

63 Seiko Instrunets Taiwan Inc.

64 Shi Ho Screw Industrial Co., Ltd.

65 Shin Chi Paper Container Co., Ltd.

66 Shuning Yurn Enterprise Co., Ltd.

67 SILICOM MAGIC CORP.

68 SILICON IMAGE

69 Smart Concept Enterprise Co., Ltd.

70 ST Microelectronics

71 ST Microelectronics / Atmel

Corporation

72 Suyin Corporation

73 Taiwan Sumida Electronics Inc.

74 Top-Nation Electronic Factory


WORLD PEACE INDUSTRIAL CO.,LTD.

ASIA FORTUNE ELECTRONIC

ENTERPRISE

-

TEX YEA CORPORTION

KROM ELECTRONICS CO.,LTD.

Lipers Enterprise Co., Ltd.

TONG SAN

SEIKO INSTRUMENTS TAIWAN INC.

-

-

-

PROHUBS INTERNATIONAL CORP

WORLD PEACE INDUSTRIAL CO.,LTD.

SMART CONCEPT ENTERPRISE LIMITED

TOPTREND TECHNOLOGIES CORP.

-

-

-

Yao Sheng Electronic Co., Ltd


8Fl., No. 76, Sec. 1, Chenggung Rd., Nangang Chiu,


No. 238-1, Jihe Rd., Shrlin Chiu, Taipei, Taiwan

111, R.O.C.

No. 2-2, Alley 56, Lane 250, Sec. 2, Huanhe S. Rd.,

Wanhua Chiu, Taipei, Taiwan 108, R.O.C.



2Fl., No. 1, Alley 16, Lane 235, Bauchiau Rd.,

Shindian City, Taipei, Taiwan 231, R.O.C.

12Fl., No. 786-1, Jungjeng Rd., Junghe City, Taipei,

Taiwan 235,R.O.C.

Suite 406, No. 372, Linsen N. Rd., Jungjeng Chiu,


4Fl., No. 40, Sec. 2, Minchiuan E. Rd., Jungshan


12Fl., Yungchuen St., Shiaugang Chiu, Kaohsiung,

Taiwan 812, R.O.C.

No. 188-1, Hungdau Rd., Sanshia Jen, Taipei,

Taiwan 237, R.O.C.

5Fl., No. 5, Lane 163, Shinyi Rd., Banchiau City,




8Fl., No. 76, Sec. 1, Chenggung Rd., Nangang Chiu,


5Fl., No. 67, Jungfeng N. Rd., Jungli City, Taoyuan,

Taiwan 320, R.O.C.

12Fl., No. 325, Sec. 1, Duenhua S. Rd., Taipei,

Taiwan 105, R.O.C.

8Fl.-2, No. 15, Lane 360, Sec. 1, Neihu Rd., Neihu


No. 233, Fude 1st Rd., Shijr City, Taipei, Taiwan

221, R.O.C.

No. 171, Fude St., Shinyi Chiu, Taipei, Taiwan

110, R.O.C.

5F, No. 15, Wu Chuang 6th Rd., Wu Ku Industrial

Zone, Wu Ku Shiang, Taipei Hsien, Taiwan 248,

Zip Code

115

VER1.0


Transistor

111

108

105

231

235

100

104

812

237

220

221

115

320

105

114

221

110

248

IC

Packing AD

Diode, IC, Transistor

Diode, IC, Transistor

Capacitor

IC

IC

Scraw

Carton

Choke

IC

IC

Packing AD

IC

IC

Socket

Choke

Diode

6-22


No.

Vendor Name

75 TOSHIBA CORPORATION


TOSHIBA ELECTRONICS TAIWAN

CORP.CO.,

TOPSHINE ELECTRONICS CORP.

76 TOSHIBA SEMICONDUTORS

77 TOSHIBA SEMICONDUTORS

78 Trident Technologies Inc.

79 Trim International

TOSHIBA ELECTRONICS TAIWAN

CORP.CO.,

TRIDENT TECHNOLOGIES INC

80 TSMT- Taiwan Surface Mounting

Technology Corp.

81 UNITED MICROELECTRONICS

CORP.

82 Usance Innovative Products Ltd.

83 Walsin Technology Corp.

84 Well Shin Enterprise Co., Ltd.

-

-

-

-

SAS ELECTRONIC(TAIWAN)CO., LTD.

85 WINBOND ELECTRONICS CORP.

ULTIMA ELECTRONICS CORP.

86 Yageo Corporation

-

87 Yem Chio Co., Ltd.

-

88 Yo Tai Plastic Industrial Co., Ltd.

-

89 Yund Cheng Industrial Co., Ltd.

-




5Fl., No. 68, Joutz St., Neihu Chiu, Taipei, Taiwan

114, R.O.C.



14F, No. 3, Lishing 2nd Rd., Hsinchu, Taiwan 300,

R.O.C.

21Fl., No. 508, Sec. 5, Jungshiau E. Rd., Taipei,

Taiwan 110, R.O.C.

No. 7, Shinghua Rd., Taoyuan City, Taoyuan,

Taiwan 330, R.O.C.

6F, No. 3, Lane 235, Bauchiau Rd., Shindian City,


5F-3, No. 123, Lane 235, Pao-Chiao Rd., Hsin Tien

City, Taipei Hsien, Taiwan 231, R.O.C

No. 8, Dafeng Rd., Taoyuan City, Taoyuan, Taiwan

330, R.O.C.

No. 14, Lane 498, Sec. 3, Chenggung Rd., Neihu


9Fl., No. 18, Alley 1, Lane 768, Sec. 4, Bade Rd.,

Sungshan Chiu, Taipei, Taiwan 105, R.O.C.

3F, No. 233-1, Bauchiau Rd., Shindian City, Taipei,

Taiwan 231, R.O.C.

No. 423, Sec. 3, Mingj Rd., Taishan Shiang, Taipei,

Taiwan 243, R.O.C.

No. 26, Shujung St., Shulin City, Taipei, Taiwan

238, R.O.C.

No. 15, Lane 333, Shinshu Rd., Shinjuang City,


Zip Code

105

VER1.0


IC, Transistor

114

105

300

110

330

231

231

330

114

105

231

243

238

242

IC, Diode

IC, Diode

IC

Label

PCB insertion

IC

Elec. accessory

Core

Power cord

IC

Capacitor, Resistor

Packing AD

Leg base

Cabinet

6-23

P.C. BOARD TOP VIEW VER1.0

MODULE NAME

IMAGE BOARD ASS'Y

PART NO.

DPWB11393-1GGWS

MODULE NAME

AC MASTER POWER SWITCH B/D ASS'Y

PART NO.

DPWB11398-1G---

7-1


MODULE NAME PART NO.

AUDIO AMPLIFIER BOARD ASS'Y

DPWB11372-1G-S-

MODULE NAME

FRONT BUTTON CONTROL BOARD ASS'Y

PART NO.

DPWB11372-1G-K2

7-2


MODULE NAME

AV MODULE BOARD ASS'Y

PART NO.

DPWB11396-1G-T-

MODULE NAME

Y DRIVE A’SSY

7-3

PART NO.

LJ92-00597C


MODULE NAME

LOGIC BOARD ASS'Y

PART NO.

LJ92-00621A

MODULE NAME

MAIN POWER ASS'Y

7-4

PART NO.

LJ44-00025A


MODULE NAME

AC FILTER ASS'Y

PART NO.

LJ92-00579A

MODULE NAME

X DRIVE ASS'Y

7-5

PART NO.

LJ92-00596C


MODULE NAME

LOGIC E-BUFFER ASS'Y

PART NO.

LJ92-00600A

MODULE NAME

Y-BUFFER (UPPER) ASS'Y

PART NO.

LJ92-00570A

7-6


MODULE NAME

Y-BUFFER (LOWER) ASS'Y

PART NO.

LJ92-00571A

MODULE NAME

LOGIC F-BUFFER ASS'Y

7-7

PART NO.

LJ92-00601A


MODULE NAME PART NO.

PDP PANEL MODULE ASS'Y

VVEPP42SD001F--

7-8

ELECTRONIC MODULES LIST VER1.0

Model Name: GTW-P42M203

No. Module Supplier Supplier's Designator

/ Part #

Sampo DPWB11393-1GGWS

2 AC Master Power Switch Sampo DPWB11398-1G---

Board

3 Audio Amplifier Board Sampo DPWB11372-1G-S-

Sampo DPWB11372-1G-K2 4 Front Button Control

Board

5 AV Module Board (with tuner)

Sampo DPWB11396-1G-T-

10 X Drive

11 Logic E- Buffer

12 Y-Buffer (Upper)

13 Y-Buffer (Lower)

14 Logic F- Buffer

15 PDP Panel Module

Samsung LJ92-00597C

Samsung LJ92-00621A

Samsung LJ44-00025A

Samsung LJ92-00579A

Samsung LJ92-00596C

Samsung LJ92-00600A

Samsung LJ92-00570A

Samsung LJ92-00571A

Samsung LJ92-00601A

Samsung VVEPP42SD001F--

Quantity Per

Final

Assembly

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

Current Revision

Level

S11393-05-1A1

OR

A11372-02-100

K2

T11396-00-100

A1

A4

A1

0.2

A1

A1

A1

A1

A1

V1

8-1

EXPLODED VIEW VER1.0

9-1

PACKAGING OF THE LIST VER1.0

10-1

42-Inch PDP Display Service Manual for Model GTW

42“ PDP

SERVICE MANUAL

MODEL：

CONTENTS

8

Main unit button

POWER VOLTAGE ADJUSTMENT FOR SAMSUNG TTL PANEL

*Note: When adjusting the DVI and RGB color temperatures, please set the PDP input source so that it matches the color temperature source being adjusted (DVI color temp. to be adjusted with DVI source under DVI mode, RGB color temp. with RGB source under RGB mode, AV color

temp. with Composite source under AV1 mode).*

Image Board Signal Block Diagram

PDP Sound Block Diagram

Tuner Signal Block Diagram

No. Module Supplier Supplier's Designator

/ Part #

Quantity Per

Final

Assembly

Current Revision

Level

Related manuals

42-Inch PDP Display Service Manual for Model GTW

42“ PDP

SERVICE MANUAL

MODEL：

CONTENTS

8

Main unit button

POWER VOLTAGE ADJUSTMENT FOR SAMSUNG TTL PANEL

*Note: When adjusting the DVI and RGB color temperatures, please set the PDP input source so that it matches the color temperature source being adjusted (DVI color temp. to be adjusted with DVI source under DVI mode, RGB color temp. with RGB source under RGB mode, AV color

temp. with Composite source under AV1 mode).*

Image Board Signal Block Diagram

PDP Sound Block Diagram

Tuner Signal Block Diagram

No. Module Supplier Supplier's Designator

/ Part #

Quantity Per

Final

Assembly

Current Revision

Level

Related manuals

Samsung

GTW-P50M603

akira

PLT-42TT

akira

PLT-42TT

Wooyoung Telecom

PXWHL900D

Samsung

Series 5+ 540

Gateway

HD Plasma TV

Gateway

HD Plasma TV

Sampo

PME-42S6S

Sampo

PME-42S6S

Gateway

50-inch

Gateway

GTW-P42M102

Gateway

GTW-P42M102