EIB Moco230V EN 060401 24/05/06 10:59 Page 1

animeo

Wall Mounted

4 AC Motor Controller WM/ DRM 220-240V AC

DIN Rail

Ref. : 1 860 114 Ref. : 1 860 116

The animeo EIB / KNX 4 AC Motor Controller WM/ DRM 220-240V AC is designed to control four individual configurable motor outputs for Venetian blinds, roller shutters, screens, awnings or windows. Local push button inputs can be used as conventional push buttons or as universal binary EIB inputs. The four outputs can also be controlled by using the animeo RTS radio plug in module.

BENEFITS AND PRODUCT FEATURES:

- Practical installation benefits which reduce the installation time, e.g. spring connectors, cable tension release, …

- A group input can be used to control all four outputs independent of ETS programming.

- Single fuse protection per motor output.

- The device can be used basically without the need to be programmed by the ETS software.

- Max. 8 local push button inputs can be used as universal EIB binary inputs to connect for example window contacts, temperature sensors or presence detectors. A conventional push button can also be used in order to realise dimming functions in combination with lighting actuators.

- User friendly and intuitive configuration via the ETS parameter cards.

- Intelligent switching between manual and automatic functions to provide excellent user comfort and powerful energy saving functions.

- Position feedback of each motor output during move and when reaching the UP and DOWN end limits

- Two free configurable security levels per motor output.

- Free configurable action at mains power return.

- Automatic cascading of the motor outputs to limit the peak current in case of mains power return and bus safety functions.

- Plug and play! The motor outputs can also be controlled via the Somfy RTS radio technology by using the animeo

RTS radio plug in module at any time without additional wiring.

- In cases where radio technology is not allowed, e.g. in hospitals, the motor outputs can also be controlled with the animeo Infrared module!

Local control with

Radio Technology Somfy

®

Possible upgrade

EIB Moco230V EN 060401 24/05/06 10:59 Page 2

WIRING DIAGRAM: animeo EIB / KNX 4 AC Motor Controller WM/ DRM 220-240V AC

CHARACTERISTICS:

The 4AC Motor Controller animeo EIB / KNX is an electronic, indpendently mounted control with looped-through PE connection.

4 AC Motor Controller Ref. 1 860 114 Ref.: 1 860 116

Supply voltage

Supply voltage from EIB Bus

Rated current consumption EIB

Stand-by current (primary)

Max. motor current consumption

Supply voltage of group control input

Supply voltage of local push buttons

Terminals

Terminal EIB

Running time per output (Relay contact)

Fuse per output

Operating temperature

Relative humidity

Material of housing

Housing dimensions

Degree of protection

Protection class

Automatic action

Pollution degree

Rated impulse voltage

Temperature of ball pressure test

Conformity

220-240VAC / 50/60 Hz

EIB-voltage 21…30VDC, SELV as per EIB/ KNX guidelines

26 mA @ 230V

4 x 3,15 A, cos_ =0,95

SELV, 16VDC =

SELV, 16VDC =

Spring connectors

EIB bus terminal (black/red) max. 5 minutes

4 x 3,15 AH

0°C to 45°C

85%

CC-ABS Polycarbonat

180 x 255 x 63mm

IP20

II, corrosponding to the installation

Typ 1.C micro interruption

2

4 kV

75°C

CE by EN 60730-1:2000

220-240VAC / 50/60 Hz

EIB-voltage 21…30VDC, SELV as per EIB/ KNX guidelines

26 mA @ 230V

4 x 3,15 A, cos_ =0,95

SELV, 16VDC =

SELV, 16VDC

Spring connectors

EIB bus terminal (black/red) max. 5 minutes

4 x 3,15 AH

0°C to 45°C

85%

CC-ABS Polycarbonat

90 x 210 x 63mm (12TE)

IP20

II, corrosponding to the installation

Typ 1.C micro interruption

2

4 kV

75°C

CE by EN 60730-1:2000