Black Box FT1400A Instruction Sheet

Black Box FT1400A EXO Tool Frame is a versatile and user-friendly tool that simplifies the process of installing and crimping EZEX-RJ45 connectors. With its intuitive locking and unlocking mechanism, you can easily insert and remove cartridges, making it convenient to switch between different connector types. The EXO Die ensures precise crimping, delivering reliable and professional-grade connections every time. Whether you're a seasoned network technician or a DIY enthusiast, the FT1400A is an indispensable tool for any cabling project.

PDF

سند

تبلیغات

FT1400A

EXO Tool Frame

INSTRUCTION SHEET

WHAT’S INCLUDED

• (1) Tool frame

• This manual

LOCKING AND UNLOCKING THE TOOL FRAME

TO LOCK THE EXO TOOL - Squeeze handles together and hold, pushing the lock button on the front side all the way through to the back side and release handles. The tool is now in closed/locked position.

TO UN-LOCK THE EXO TOOL - Squeeze handles together and hold, pushing the lock button on the back side all the way through to the-front side and release the handles. The tool will now open.

LOCK BUTTON

INSTALLING A CARTRIDGE INTO THE EXO TOOL FRAME

With the EXO Tool Frame unlocked, select the desired (EZ-RJ45 Blue or

EXO-EX Black) cartridge and line up the 2 tabs on the cartridge to the tool frame opening. Make sure the laser etched writing on the tool is facing you. Put the cartridge behind the EXO Tool frame opening and push the cartridge up in the EXO Tool Frame until it snaps into place.

NOTE: If you are left-handed, flip the empty EXO tool frame over and install the cartridge the same way.

1.877.877.2269

BLACKBOX.COM

FT1400A

EXO Tool Frame

INSTRUCTION SHEET (CONTINUED)

CABLE PREP AND CRIMPING EZEX-RJ-45 CONNECTORS

STEP 1: Remove the cable jacket leaving 1” to 1-1 /2” of conductors. If there is a pair separator, remove it by cutting flush at the end of the cable.

STEP 2: Untwist all 4 pairs and comb out all twists so con ductors can lay side by side with no gaps. Configure your pairing to the T568A or T568B.

See chart below.

T568A/T568B WIRING CHART

Wire

T568A

T568B

W/G

W/O

W/G

W/BL

W/BR

STEP 3: Cut all 8 ends even, insert into rear of connector, and push through and out the front end.

STEP 4: Insert prepped connector into the EXO Die™ and listen for the

“click.” It is now ‘“locked” in and ready to be crimped. Squeeze handles to gether slowly until they come to a stop. Release, unlock the connector and remove from the EXO Die.

1.877.877.2269

BLACKBOX.COM

سلام! من یک ربات چت هوش مصنوعی هستم که به طور خاص برای کمک به شما در مورد Black Box FT1400A Instruction Sheet آموزش دیده‌ام. من سند را به طور کامل بررسی کرده‌ام و می‌توانم به شما کمک کنم اطلاعات دقیقی را که نیاز دارید پیدا کنید یا محتوا را به زبان ساده و واضح توضیح دهم. چه به دنبال راهنمایی در مورد ویژگی‌های خاص، مراحل عیب‌یابی یا استفاده عمومی باشید، می‌توانید سوالات خود را بپرسید. هرچه جزئیات بیشتری در مورد نگرانی‌ها یا نیازهای خود ارائه دهید، من می‌توانم دقیق‌تر و موثرتر به شما کمک کنم!