- Computers & electronics
- Telecom & navigation
- Mobile phones
- Car kits
- Metra Electronics
- 95-7339S
- Installation instructions
advertisement
INSTALLATION INSTRUCTIONS FOR PART 95-7339
APPLICATIONS
Hyundai Genesis Coupe 2.0 2010-up
(For models equipped with manual climate control)
95-7339B
95-7339S
KIT FEATURES
• DDIN head unit provision
• ISO stacked head unit provision
• Painted to match factory finish
95-7339B=Black 95-7339S=Silver
KIT COMPONENTS
• A) Trim Panel • B) Double DIN brackets • C) (6) PC-7503 Panel Clips
A B C
WIRING & ANTENNA CONNECTIONS (Sold Separately)
Wiring Harness: • 70-7303 2009-Up Kia/Hyundai Harness
Antenna Adapter: • 40-KI11 2007-Up Kia Antenna Adapter
TOOLS REQUIRED
Panel Removal Tool • Phillips Screwdriver • Small Flat Blade Screwdriver • Socket Wrench
METRA. THE WORLD’S BEST KITS.™
1-800-221-0932 metraonline.com
© COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORATION
95-7339
Table of Contents
Dash Disassembly
– Hyundai Genesis Coupe 2.0 2010-up
Kit Preparation
– Hyundai Genesis Coupe 2.0 2010-up
Kit Assembly
– Double DIN/stacked ISO DIN head unit provision
3
4
5
Caution
Metra recommends disconnecting the negative battery terminal before beginning any installation. All accessories, switches, and especially air bag indicator lights must be plugged in before reconnecting the battery or cycling the ignition.
*NOTE: Refer also to the instructions included with the aftermarket radio.
K NOWLEDGE IS P OWER
E nhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry.
Log onto www.installerinstitute.com or call
800-354-6782 for more information and take steps toward a better tomorrow.
Metra recommends MECP certified technicians
95-7339
Dash Disassembly
1.
Unclip and remove the shifter trim panel. (Figure A)
2.
Unclip and remove the radio/climate control trim panel. (Figure B)
3.
Unclip and remove the display trim panel above radio. (Figure C)
4.
Remove (4) Phillips screws securing the radio.
5.
Remove (4) Phillips screws securing the climate control to the factory trim panel.
Continue to kit preparation
(Figure A)
(Figure B)
3
(Figure C)
95-7339
Kit Preparation
1.
Attach the climate control to the
95-7339 trim plate using the factory hardware. (Figure A)
2.
Attach the (6) panel clips to the
95-7339 trim plate. (Figure B)
Continue to kit assembly
(Figure A)
4
(Figure B)
Kit Assembly 95-7339
Double DIN/stacked ISO DIN head unit provision
1.
Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter from Metra or
AXXESS. Re-connect the negative battery terminal and test the unit for proper operation.
2.
Attach the Double DIN brackets to the aftermarket radio then mount the unit in the sub dash. (Figure A)
3.
Reassemble dash in reverse order of disassembly using the 95-7339 trim panel instead of the factory trim panel.
(Figure A)
5
Notes
Notes
INSTALLATION INSTRUCTIONS FOR PART 95-7339
METRA. THE WORLD’S BEST KITS.™
1-800-221-0932 metraonline.com
© COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORATION
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project