TECHWOOD 16911, 16911 HD LED DVD Operating Instructions Manual

OPERATING INSTRUCTIONS

16911 HD LED DVD

C O L O U R T E L E V I S I O N W I T H R E M O T E C O N T R O L

Contents

Package Contents .................................................. 2

Features ................................................................. 2

Introduction ............................................................. 2

Preparation ............................................................. 2

Safety Precautions ................................................. 3

Power.................................................................. 3

Information for users in EU Countries .................... 4

Connection to a Television Distribution System

(Cable TV etc.) from Tuner ................................. 4

Remote Control Handset ........................................ 5

Inserting Batteries ............................................... 5

Environmental Information ..................................... 5

Repair Information .............................................. 5

Remote Control Buttons ......................................... 6

LED TV and Operating Buttons .............................. 7

Viewing the Connections - Back Connectors ......... 7

Viewing the Connections - Side Connectors .......... 8

Power Connection .................................................. 8

Aerial Connection ................................................... 9

Switching On/Off ..................................................... 9

First Time Installation.............................................. 9

Connecting to a DVD player via HDMI ................. 10

Connecting to a DVD Player via Component

Sockets (YPbPr) or Scart Cable ........................... 10

Connecting the LED TV to a PC ............................11

Using Side AV Connectors ....................................11

USB Memory Connection ......................................11

USB Memory Connection ..................................11

Input Selection ...................................................... 12

Basic Operations .................................................. 12

Operation with the Buttons on the TV ............... 12

Operation with the Remote Control .................. 12

Viewing Electronic Programme Guide (EPG) ....... 12

Installation ............................................................ 13

Auto Channel Scan (Retune) Menu Operation .... 13

Manual Tuning ..................................................... 14

Digital Manual Search....................................... 14

Analogue Manual Search ................................. 14

Analogue Fine Tune.......................................... 14

Managing Stations: Channel List .......................... 14

Operating the Channel List ............................... 14

Moving a Channel ............................................. 14

Deleting a Channel ........................................... 15

Renaming a Channel ........................................ 15

Locking a Channel ............................................ 15

Managing Stations: Favourites ............................. 15

Button Functions ............................................... 15

Managing Stations: Sorting Channel List ............. 15

On-Screen Information ......................................... 16

Media Playback Using Media Browser ................. 16

Viewing Videos via USB .................................. 16

Viewing Photos via USB ................................... 16

Playing Music via USB ..................................... 17

Media Browser Settings .................................... 17

Changing Image Size: Picture Formats ................ 18

Con fi

Operating Picture Settings Menu Items ............ 19

Picture Settings Menu Items ............................. 19

PC Picture Settings........................................... 19

Con fi

Operating Sound Settings Menu Items ............. 20

Sound Settings Menu Items.............................. 20

Con guring Your TV’s Settings ............................. 20

Operating Settings Menu Items ........................ 20

Using a Conditional Access Module ..................... 21

Viewing Conditional Access Menu (*) ............... 21

Con fi

Language Settings ............................................ 22

Parental Control.................................................... 22

Parental Settings Menu Operation ................... 22

Timers ................................................................... 22

Setting Sleep Timer .......................................... 22

Setting Programme Timers ............................... 23

Con guring Date/Time Settings ............................ 23

Con fi

Con fi

Operation .......................................................... 24

Other Features ..................................................... 25

Teletext ................................................................. 25

Digital Teletext (** for UK only) ......................... 25

Analogue Teletext ............................................. 25

Tips ....................................................................... 26

Appendix A: PC Input Typical Display Modes ....... 27

Appendix B: AV and HDMI Signal Compatibility

(Input Signal Types) .............................................. 27

Appendix C: Supported DVI Resolutions.............. 28

Appendix D: Supported File Formats for USB

Mode..................................................................... 28

Appendix E: Software Upgrade ............................ 29

Speci fi cations ....................................................... 30

MOBIL TV INSTRUCTION MANUAL ................... 31

Important Instruction ............................................. 32

Please note that none of the cables and aerials referred to in this manual are included with your purchase. Should you need to connect external equipment to this product please enquire at your local stockist.

English - 1 -

If you need any assistance or a customer reference number please contact the TECHWOOD help line on 0845 543 0485

Package Contents

INFO

SLEEP SCREEN SOURCE PRESETS

RETURN MENU

FAV LANG.

SUBTITLE

EPG /

Remote Control

LED TV

Batteries: 2 X AAA

Instruction Book

1 X Video & Audio

Connection Cable

Power Adapter

Note : You should check the accessories after purchasing. Make sure that each accessory is included.

Features

• Remote controlled colour LED TV.

• Fully integrated Terrestrial digital TV (DVB-T - MPEG2)

• HDMI connectors for digital video and audio. This connection is also designed to accept high de fi signals.

• USB input.

• 1000 programmes (analogue+digital).

• OSD menu system.

• Integrated tuner MPEG 2 compatible.

• Scart socket for external devices (such as video, video games, audio set, etc.).

• Stereo sound system. (Nicam)

• Teletext, fastext, TOP text.

• Headphone connection.

• Automatic programming system.

• Forward or backward manual tuning.

• Sleep timer / Child lock.

• Automatic sound mute when no transmission.

• NTSC playback.

• AVL (Automatic Volu me Limiting).

• Auto power down.

• PLL (Frequency Search).

• PC input.

• Plug&Play for Windows 98, ME, 2000, XP, Vista,

Windows 7.

• Game Mode

Introduction

Thank you for choosing this product. This manual will guide you for the proper operation of your TV.

Before operating the TV, please read this manual thoroughly. Please do keep this manual in a safe place for future references.

This device is intended to receive and display TV programs. The different connection options make an additional expansion of the reception and display sources possible (receiver, DVD player, DVD recorder,

VCR, PC etc.).

This device is only suitable for dry, indoor use. This appliance is intended solely for private domestic use and may not be used for industrial and commercial purposes. We exclude liability in principle, if the device is not used as intended, or unauthorized modi fi cations have been made. To operate your LED TV in extreme ambient conditions may cause the damage of the device.

Preparation

For ventilation, leave a free space of at least 10 cm all around the set. To prevent any fault and unsafe situations, please do not place any objects on top of the set. Use this device in moderate climates.

10 cm

English - 2 -


Safety Precautions

Read the following recommended safety precautions carefully for your safety.

Power

• Always use the provided AC adaptor.

• Operate only from the power source speci fi ed on the AC adaptor.

• The power adaptor may become hot during normal operation. This is not a malfunction.

• Please make sure that the adaptor is not covered while in operation. Leave a space of 15 cm

(minimum) around the AC adaptor.

• The rating information and safety caution of the AC adaptor are provided on the adaptor.

WARNING: When the set is not in use for a long time, disconnect from the power.

Power Cord

Do not place the set, a piece of furniture, etc. on the power cord (mains lead) or pinch the cord. Handle the power cord by the plug. Do not unplug the appliance by pulling from the power cord and never touch the power cord with wet hands as this could cause a short circuit or electric shock. Never make a knot in the cord or tie it with other cords. The power cords should be placed in such a way that they are not likely to be stepped on. A damaged power cord can cause fi

When it is damaged and needs to be replaced, it should be done by quali fi ed personnel.

Moisture and Water

Do not use this device in a humid and damp place (avoid the bathroom, the sink in the kitchen, and near the washing machine). Do not expose this device to rain or water, as this may be dangerous and do not place objects filled with liquids, such as fl ower vases, on top.

Avoid from dripping or splashing.

If any solid object or liquid falls into the cabinet, unplug the TV and have it checked by quali fi ed personnel before operating it any further.

Cleaning

Before cleaning, unplug the TV set from the wall outlet. Do not use liquid or aerosol cleaners. Use soft and dry cloth.

Ventilation

The slots and openings on the TV set are intended for ventilation and to ensure reliable operation. To prevent overheating, these openings must not be blocked or covered in anyway.

Heat and Flames

The set should not be placed near to open fl ames and sources of intense heat such as an electric heater. Ensure that no open fl candles, are placed on top of the TV. Batteries should not be exposed to excessive heat such as sunshine, fi re or the like.

Lightning

In case of storm and lightning or when going on holiday, disconnect the power cord from the wall outlet.

Replacement Parts

When replacement parts are required, make sure that the service technician has used replacement parts which are speci fi ed by the manufacturer or have the same speci fi cations as the original one. Unauthorized substitutions may result in fi re, electrical shock or other hazards.

Servicing

Please refer all servicing to quali fi ed personnel. Do not remove the cover yourself as this may result in an electric shock.

Waste Disposal

• Instructions for waste disposal:

• Packaging and packaging aids are recyclable and should principally be recycled. Packaging materials, such as a foil bag, must be kept away from children.

• Batteries, including those which are heavy metalfree, should not be disposed of with household waste. Please dispose of used batteries in an environmentally friendly manner. Find out about the legal regulations which apply in your area.

• Do not try to recharge batteries, there is a danger of explosion. Replace batteries only with the same or equivalent type.

English - 3 -


Information for users in EU

Countries

This symbol on the product or on its packaging means that your electrical and electronic device should be disposed at the end of its service life separately from your household wastes. There are separate collection systems for recycling in the EU. For more information, please contact the local authority or the dealer where you purchased the product.

Disconnecting the Device

The mains plug is used to disconnect the TV set from the mains and therefore it must remain readily operable.

Headphone Volume

Excessive sound pressure from earphones and headphones can cause hearing loss.

Installation

To prevent injury, this device must be securely attached to the wall in accordance with the installation instructions when mounted to the wall (if the option is available).

LED Screen

The LED panel is a very high technology product with about a million thin fi lm transistors, giving you fi ne picture details. Occasionally, a few non-active pixels may appear on the screen as a fi xed blue, green or red point. Please note that this does not affect the performance of your product.

Warning! Do not leave your TV in standby or operating mode when you leave your house.

Connection to a Television Distribution

System (Cable TV etc.) from Tuner

Devices connected to the protective earthing of the building through the mains connection or through other apparatus with a connection to protective earthing-and to a television distribution system using coaxial cable, may in some circumstances create a fi re hazard.

Connection to a cable distribution system has therefore to be provided through a device providing electrical isolation below a certain frequency range

(galvanic isolator, see EN 60728-11).

Licence Noti fi cation (Optional)

M a n u f a c t u r e d u n d e r l i c e n s e f r o m D o l b y

Laboratories.

TRADEMARK ACKNOWLEDGMENT

“Dolby” and the double-D symbol are trademarks of

Dolby Laboratories.

The Standby On/Off button does not completely switch off this device, it will still consume power. In order to fully switch off this device, the power should be switched off at the mains socket. Because of this the device should be set up in a way, that unobstructed access to the mains socket is guaranteed, so that in case of an emergency the mains plug can be pulled out immediately. To exclude the danger of fi re, the power cord should be removed from the mains socket prior to a long period of non-use, i.e. during vacations.

Electrical device not in the hands of children

Never let children use any electrical device unsupervised. Children cannot always recognize possible dangers. Batteries / accumulators can be life threatening when swallowed. Store batteries out of the reach of small children. In case of swallowing a battery medical aid has to be sought immediately.

Also keep the packaging foils away from children, as there is danger of suffocation.

English - 4 -


Remote Control Handset

Inserting Batteries

• Remove the battery cover located on the back of the handset by gently pulling backwards from the indicated part.

• Insert two AAA/R3 or equivalent type batteries inside. Observe the correct polarity (+/-) when inserting batteries and replace the battery cover.

Environmental Information

• This television is designed to consume less energy to save environment.

You not only help to save the environment but also you can save money by reducing electricity bills thanks to the energy ef fi ciency feauture of this TV.

To reduce energy consumption, you should take the following steps:

• You can use Power Save Mode setting, located in the Feature menu. If you set Power Save Mode as On, the TV will switch to energy-saving mode and luminance level of TV set will be decreased to optimum level. Note that some picture settings will be unavailable to be changed when the TV is in

Power Save Mode.

Note : Remove the batteries from the remote control handset when it is not to be used for a long period.

Otherwise it can be damaged due to any leakage of batteries. Remote range is approximately 7m/23ft.

• When the TV is not in use, please switch off or disconnect the TV from the mains plug. This will also reduce energy consumption.

• Disconnect power when going away for longer time.

• Note that annually, using the TV set in Power Save

Mode has more power ef fi ciency than disconnecting the TV from the mains plug instead of keeping stand-by mode. Therefore it is highly recommended to activate Power Save Mode setting to reduce your annual power consumption.And also it is recommended to disconnect the TV from the mains plug to save energy more when you do not use.

• Please helps us to save environment by following these steps.

Repair Information

Please refer all servicing to quali fi ed personnel. Only quali fi ed personnel must repair the TV. Please contact your local dealer, where you have purchased this TV for further information.

English - 5 -


Remote Control Buttons

1.

2.

3.

4.

5.

Standby

Image size/ Expand (in TXT mode)

Sleep timer

Numeric buttons

Return / Exit (in DTV mode) / Index page (in

TXT mode)

6.

7.

8.

9.

Cursor up / Page up (in TXT mode)

Cursor left

Programme up (Page down in DTV mode)

Programme down (Page up in DTV mode)

10. Mono-Stereo / Dual I-II / Current language

11. Previous Programme / Swap

12. Electronic programme guide

13. Info / Reveal (in TXT mode)

14. Picture mode selection

15. Source selection

16. Red button / Zooms videos (in Media Browser video mode)

17. Green button

18. Yellow button

19. Menu on-off

20. Blue button

21. OK / Edit Channel list / Hold (in TXT mode)

22. Cursor right / Subpage (in TXT mode)

23. Cursor down / Page down (in TXT mode)

24. Volume up

25. Volume down

26. Mute

27. Teletext / Mix

28. Subtitle on-off (in DTV mode) / TXT Subtitle

29. FAV (*) (Favourite Selection) (in DTV mode)

30. No Function

31. Media Browser playback buttons. (in DTV mode)

(*) Only for EU country options.

Note: Buttons that are not indicated with a number on the remote control illustration are not functional in TV mode.

INFO

SLEEP SCREEN SOURCE PRESETS

RETURN MENU

29

FAV LANG.

SUBTITLE

EPG /

28

30

31

English - 6 -


LED TV and Operating Buttons

FRONT and REAR VIEW Control buttons VIEW

P\V-AV

Control Buttons

1. Standby On/Off button

2. TV/AV button

3. Programme Up/Down buttons-

Volume Up/Down buttons

Note :You can use +/- buttons to change volume. If you want to change channels, press P/V/

AV button once and then use

+/- buttons. If you hold the P/V/

AV button about a few seconds, source OSD will be displayed.

Main menu OSD cannot be displayed via control buttons.

Viewing the Connections - Back Connectors

12V

DC IN

SPDIF

Coax.OUT

1.

2.

3.

4.

HDMI 1: HDMI Input

HDMI Input are for connecting a device that has an HDMI socket. Your LED TV is capable of displaying

High De fi nition pictures from devices such as a High De nition Satellite Receiver or DVD Player. These devices must be connected via the HDMI sockets or Component Socket. These sockets can accept either 720p or 1080p signals. No sound connection is needed for an HDMI to HDMI connection.

RF Input connects to an aerial antenna system.

Note that if you use a decoder or a media recorder, you should connect the aerial cable through the device to the television with an appropriate antenna cable, as shown in the illustration in the following pages.

SCART input or output for external devices. Connect the SCART cable between SCART socket on TV and

SCART socket on your external device (such as a decoder, a VCR or a DVD player).

Note: If an external device is connected via the SCART socket, the TV will automatically switch to AV mode.

Note : S-VHS signal is supported via the scart socket.

PC Input is for connecting a personal computer to the TV set.

English - 7 -


5.

6.

Connect the PC cable between the PC INPUT on the TV and the PC output on your PC.

Note : You can use YPbPr to VGA cable (not supplied) to enable YPbPr signal via PC input.

WARNING : You cannot use PC and YPbPr at the same time.

S/PDIF Coaxial Out outputs digital audio signals of the currently watched source.

Use an SPDIF coaxial cable to transfer audio signals to a device that has S/PDIF input

V+ V+

DC 12 V Input is used for connecting the supplied power adaptor.

VV-

.

2.

3.

4.

1.

Viewing the Connections - Side Connectors

CI Slot is used for inserting a CI card. A CI card allows you to view all the channels that you subscribe to. For more information, see “Conditional Access” section.

USB input.

TV control buttons.

Side audio-video connection input is used for connecting video and audio signals of external devices. To make a video connection, you must use the supplied AV connection cable for enabling connection. First, plug singular jack of the cable to the TV’s Side AV socket. Afterwards, insert your video cable’s

(not supplied) connector into the YELLOW input of the supplied AV connection cable. Colours of the connected jacks should match.

USB

5Vdc

Max:500mA

To enable audio connection, you must use RED and WHITE inputs of the side

AV connection cable supplied. Afterwards, insert your device’s audio cable’s connectors into the RED and WHITE jack of the supplied side AV connection cable. Colours of the connected jacks should match.

5.

Note: You should use audio inputs of side AV connection cable (RED & WHITE) to enable sound connection when connecting a device to your TV by using PC or COMPONENT VIDEO input.

Headphone jack is used for connecting an external headphone to the system.

Connect to the HEADPHONE jack to listen to the TV from headphones

(optional).

P\V-AV

Power Connection

IMPORTANT: The TV set is designed to operate on 12 V DC. For this, an adaptor is used which gives

12 V voltage. Connect this adaptor to a system that supplies 110-240V AC,50/60Hz.

• After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the mains .

AC adapter

To POWER

INPUT DC 12 V terminal

12V

DC IN

SPDIF

Coax.OUT

English - 8 -


Aerial Connection

• Connect the aerial ,cable TV plug to the AERIAL

INPUT socket located at the rear of the TV.

12V

DC IN

SPDIF

Coax.OUT

First Time Installation

IMPORTANT: Ensure that the aerial is connected before switching on the TV for the first time installation.

• When the TV is operated for the fi rst time, the installation wizard will guide you through the process. First, language selection screen will be displayed:

Switching On/Off

To Switch the TV On

• Connect the power cord to the 110-240V AC 50/60

Hz. Then the standby LED lights up. (The led will blink during the standby On/Off)

• To switch on the TV from standby mode either:

• Press the “ ” button, P+ / P or a numeric button on the remote control.

• Press the “ ” button, or + button on the TV. The

TV will then switch on.

• When the mains power is fi rst connected to the device the light on the front of the unit will start fl ashing for few seconds, when it stops fl ashing (remains constant) the TV will be in standby mode.

Note : If you switch on your TV via PROGRAMME

UP/DOWN buttons on the remote control or on the

TV set, the programme that you were watching last will be reselected.

By either method the TV will switch on.

Note: When the device is coming out of standby the light on the front of the unit will fl ash until the picture appears. If you activate the power operation again

(before the light has had time to stop fl ashing) the device will turn off into stndaby mode again. This is normal operation and not a fault

Note : The standby light will blink while the TV is powering up from Standby mode.

To Switch the TV Off

• Press the “ ” button on the remote control or press the “ ” switch on the TV, the TV will switch to standby mode.

• To power down the TV completely, unplug the power cord from the mains socket.

Note : When the TV is switched to standby mode, standby LED can blink to indicate that features such as Standby Search, Over Air Download or Timer is active.

• Use “ ” or “ ” buttons to select your language and press OK button to set the selected language and continue.

• After selecting the language, “ Welcome!

” screen will be displayed, requiring you to set Country, Teletext

Language and Scan Encrypted options.

• By pressing “ ” or “ ” button, select the country you want to set and press “ ” button to highlight

Teletext Language option. Use “ ” or “ ” button to select desired Teletext Language.

• Press “ ” button after setting Teletext Language option. Scan Encrypted will be then highlighted.

You can set Scan Encrypted as Yes if you want to scan coded stations.Afterwards select the desired

Teletext Language.

• Press OK button on the remote control to continue and the following message will be displayed on the screen:

English - 9 -


To select the “Yes” or “No” option, highlight the item by using “ ” or “ ” buttons and press OK button.

Afterwards, the following OSD will be displayed on the screen and the television will search for digital terrestrial TV broadcasts

Connecting to a DVD player via HDMI

Please refer to your DVD player’s instruction book for additional information. Power off both the TV and the device before making any connections.

Note : Not all cables shown in the illustration are supplied.

• If your DVD player has an HDMI socket, you can connect via HDMI for better video and audio quality.

12V

DC IN

SPDIF

Coax.OUT

HDMI Cable

(not supplied)

Note: You can press MENU button to cancel.

It is possible that the TV could fi more than one transmitter. In this case the available transmitters will be shown on screen. Use the navigation buttons to select the correct transmitter for your local region.

• After all the available stations are stored, the

Channel List will be displayed on the screen.

External device

• When you connect to DVD player as illustrated above, switch to the connected HDMI source. See, Input

Selection section for more information on changing sources.

Note: If the device is connected via HDMI and the

TV is turned off into standby mode, when the unit comes back on there may be an error message on screen ‘No video available’. You may need to turn the device off at the wall socket to reset the

HDMI connection.

Connecting to a DVD Player via

Component Sockets (YPbPr) or

Scart Cable

• Some DVD players are connected through

COMPONENT SOCKETS (YPbPr). YPbPr can be used only when you connect a device that has a

YPbPr output through the PC input with YPbPr to

PC cable (YPbPr cable is not supplied).

• When the connection is made, switch to YPbPr source. See, “Input selection” section.

• To enable audio connection, use the VGA/

Component Audio cable . First, plug the single jack of the cable to the TV. Afterwards, insert your DVD player’s audio cable’s connectors into the plural part of the VGA/Component audio connection cable

( see illustration below ). Colours of the connected jacks should match ( RED & WHITE).

• Press OK button to quit channel list and watch TV.

AV Connection

Cable (supplied)

Audio Cable

(not supplied)

To DVD Player's

Audio Outputs.

• When the connection is made, switch to YPbPr source.

See, Input selection section.

English - 10 -


• You may also connect through the SCART input.

12V

DC IN

SPDIF

Coax.OUT

audio connection cable . Colours of the connected jacks should match. See illustration below.

• Afterwards, you should switch to Side AV source. See the section Input selection in the following sections for more information.

AV Connection

Cable (supplied)

AV Cable

(not supplied)

Camera

Headphone

Scart Cable

(not supplied)

External device

Note: These three methods of connection perform the same function but in different levels of quality. It is not necessary to connect by all three methods.

Connecting the LED TV to a PC

For displaying your computer’s screen image on your

LED TV, you can connect your computer to the TV set.

Power off both computer and display before making any connections. Use a 15-pin D-sub display cable to connect a PC to the LED TV. When the connection is made, switch to PC source. See “Input selection” section. Set the resolution that suits your viewing requirements. Resolution information can be found in the appendix parts

PC VGA Cable

(Not supplied)

• To listen the TV sound from headphones, you should connect headphones to your TV by using the

HEADPHONE jack as illustrated above.

USB Memory Connection

• You can connect USB devices to your TV by using the USB input of the TV. This feature allows you to display/play JPG, MP3 and video fi les stored on a

USB stick.

• It is possible that certain types of USB devices (e.g.

MP3 Players) may not be compatible with this TV.

• You may back up your fi les before making any connections to the TV set in order to avoid any possible data loss. Note that manufacturer will not be responsible for any fi le damage or data loss.

• Do not pull out USB module while playing a fi le.

CAUTION: Quickly plugging and unplugging USB devices, is a very hazardous operation. Do not repeatedly quickly plug and unplug the drive. This may cause physical damage to the USB player and the USB device itself.

SIDE VIEW USB MEMORY

USB

PC Input

(back) Or

Side Audio/ Video

Connection Cable

(Supplied)

PC Audio Cable

(Not supplied)

.

Side AV Input

Using Side AV Connectors

You can connect a range of optional equipment to your

LED TV using side connectors of the TV.

• For connecting a camcorder or camera , you should use AV socket (side). To do this, you must use the supplied video/audio connection cable . First, plug single jack of the cable to the TV’s AV IN socket

(side). Afterwards, insert your camera cable’s ( not supplied ) connectors into the plural part of the video/

5Vdc

Max:500mA

USB Memory Connection

IMPORTANT: The TV should be switched off while plugging or unplugging a USB device.

Plug your

USB devices to the USB input of the TV.

Note: It is possible certain types of hard disk drives are not supported.

English - 11 -


Input Selection

Once you have connected external systems to your TV, you can switch to different input sources.

Press “ SOURCE ” button on your remote control consecutively for directly changing sources.

Volume Setting

• Press “ V+ ” button to increase the volume. Press “ V-” button to decrease the volume. A volume level scale

(slider) will be displayed on the screen.

Programme Selection (Previous or Next

Programme)

• Press “ P ” button to select the previous programme.

• Press “ P + ” button to select the next programme.

Programme Selection (Direct Access)

• Press numeric buttons on the remote control to select programmes between 0 and 9. The TV will switch to the selected programme. To select programmesin channels 10 and above press the numeric buttons of the channel you require consecutively. If you press only one button, that respective channel will be displayed.

Note : YPbPr mode can be used only when you connect a device that has a YPbPr output through the

PC input with YPbPr to PC cable (not supplied).

Basic Operations

Viewing Electronic Programme

Guide (EPG)

You can view the electronic programme guide (EPG) to view information about available programmes.To view the EPG menu please press EPG button on the remote control.

• Press “ ”/“ ” buttons to navigate through channels.

You can operate your TV using both the remote control and onset buttons.

Operation with the Buttons on the TV

Main menu OSD cannot be displayed via control buttons. “ +/” buttons will function as volume up/down as default. Even if you set other functions for these buttons, “ +/” buttons will perform as default after a short while.

Volume Setting

• Press “ ”/“ ” buttons to navigate through the programme list.

• EPG menu displays available information on all channels.

• Please note that event information is updated automatically. If there are no event information data available for channels, EPG will be displayed with blanks.

• Press “ P/V/AV ” button once and then use “ +/” buttons to increase or decrease volume, so a volume level scale (slider) will be displayed on the screen.

While Tv is on, +/- button can use as volume + or volume - as default.

Programme Selection

• Press “ P/V/AV ” button once and then use “ +/” buttons to change channel. By pressing “ +/” button,you can select the next or previous programme.

AV Mode

EPG Screen One

•

Operation with the Remote Control

•

Hold the “ P/V/AV ” button,

The remote control of your TV is designed to control all the functions of the model you selected. The functions will be described in accordance with the menu system of your TV.

source OSD will be displayed in a few second.

Red button (Prev Day): Displays the programmes of previous day.

Green button (Next day): Displays the programmes of the next day.

Yellow button (Zoom) : Expands programme information.

Blue button (Filter): Views fi ltering options.

English - 12 -


INFO (Details): Displays the programmes in detail.

Numeric buttons (Jump) : Jumps to the preferred channel directly via numeric buttons.

OK (Options): Displays programme options including

“ Select Channel ” option.

Text (Search): Displays “ Guide Search ” menu.

SUBTTL: Press SUBTITLE button to view Select

Genre menu. Using this feature, you can search the programme guide database in accordance with the genre. Info available in the programme guide will be searched and results matching your criteria will be listed.

(Now) : Shows the current programme.

EPG Screen Two



INFO (Event Details): Displays the programmes in detail.

Green button: Programme schedule will be listed

Yellow button: Display EPG data in accordane with timeline schedule

Blue button (Filter): Views fi ltering options.

Installation

Press MENU button on the remote control and select

Installation by using “ ” or “ ” button. Press the

OK button and the following menu screen will be displayed.

Red button (Prev Time Frame): Displays the programmes of previous time frame.

Green button (Next Time Frame): Displays the programmes of the next time frame.

Yellow button (Prev Day): Displays the programmes of previous day.

Blue button (Next day): Displays the programmes of the next day.

Numeric buttons (Jump) : Jumps to the preferred channel directly via numeric buttons.



Text button (Filter): Views fi ltering options.

INFO (Details): Displays the programmes in detail.

EPG Screen Three

Select Automatic Channel Scan (Retune) by using

“ ”/“ ” button and press OK button. Automatic

Channel Scan (Retune) options will be displayed. You can select Digital Aerial, Analogue or Digital Aerial-

Analogue tuning using “ ”/“ ” and OK buttons.

Auto Channel Scan (Retune) Menu

Operation

Digital: Searches and stores aerial DVB stations.

Analogue: Searches and stores analogue stations.

Full: Searches and stores both analogue and aerial

DVB stations.

• Whenever you select an automatic search type and press OK button, a con fi rmation screen will appear on the screen. To start installation process, select

Yes , to cancel select No by using .“ ” or “ ” and

OK button.

• After auto channel scan type is set, selected and con fi rmed, the installation process will start and progress bar will move along. Press MENU button to cancel process. In such a case, located channels are not stored.

English - 13 -


Manual Tuning

HINT: This feature can be used for direct broadcast entry.

• Select Manual Channel Scan from the Installation menu by using “ ”/“ ” and OK buttons. Manual

Scan options screen will be displayed.

• Select the desired Search Type using “ ” or “

” button. Manual search options will change accordingly. Use “ ”/“ ” button to highlight an item and then press “ ” or “ ” button to set an option.

You can press MENU button to cancel.

Digital Manual Search

analog channels, digital channels and external sources stored.

• Press OK button to proceed. Use “ ” or “ ” button to set Fine Tune. When fi nished, press OK button again.

Managing Stations: Channel List

The TV sorts all stored stations in the Channel List.

You can edit this channel list, set favourites or set active stations to be listed by using the Channel List options.

• Press MENU button to view main menu. Select

Channel List item by using “ ” or “ ” button. Press

OK to view menu contents.

In manual channel scan, the number of the multiplex or frequency are entered manually and only that multiplex or frequency are searched for the channels.

After selecting search type as Digital , you can enter the multiplex or frequency number using the numeric buttons and press OK button to search.

Analogue Manual Search

Select Edit Channel List to manage all stored channels. Use “ ” or “ ” and OK buttons to select

Edit Channel List.

Operating the Channel List

• Press “ ” or “ ” button to select the channel that will be processed. Press “ ” or “ ” button to select a function on Channel List menu.

• Use P+/P buttons to move page up or down.

After selecting search type as analogue, you can use

“ ”/“ ” button to highlight an item and then press “

” or “ ” button to set an option.

• Press BLUE button to view ltering options.

• Press MENU button to exit.

Moving a Channel

Enter the channel number or frequency using the numeric buttons. You can then press OK button to search. When the channel is located, any new channels that are not on the list will be stored.

Analogue Fine Tune

• Select Analogue Fine Tune from the Installation menu by using “ ” or “ ” and OK buttons. Analogue fi ne tune screen will be displayed. Analogue Fine

Tune feature will not be available if there are no

• First select the desired channel. Select Move option in the channel list and press OK button.

• Edit Number screen will be displayed. Enter the desired channel number by using the numeric buttons on the remote control. If there is a previously stored channel on that number, a warning screen will be displayed. Select Yes if you want to move the channel and press OK .

• Press OK button to process. Selected channel is now moved.

English - 14 -


Deleting a Channel

You can press GREEN button to tag/untag all channels; YELLOW button to tag/untag channel.

• Select the channel that you want to delete and select

Delete option. Press OK button to continue.

• A warning screen will appear. Select YES to delete, select No to cancel. Press OK button to continue.

Renaming a Channel

• Select the channel that you want to rename and select Edit Name option. Press OK button to continue.

• Pressing “ ” or “ ” button moves to the previous/ next character. Pressing “ ” or “ ” button toggles the current character, i.e., ‘b’ character becomes ‘a’ by “ ” and ‘c’ by “ ”. Pressing the numeric buttons

‘0...9’ replaces the highlighted character with the characters printed above the button one by one as the button is pressed.

• When fi nished, press

MENU to cancel.

OK button to save. Press

Locking a Channel

You can press GREEN button to tag/untag all channels; YELLOW button to tag/untag a single channel.

• Select the channel that you want to lock and select

Lock option. Press OK button to continue.

• You will be asked to enter parental control PIN.

Default PIN is set as 0000 . Enter the PIN number.

• Press OK button when the desired channel is highlighted to lock/unlock the channel. Lock symbol will be displayed next to the selected channel.

Managing Stations: Favourites

You can create a list of favourite programmes.

• Press MENU button to view main menu. Select

Channel List item by using “ ” or “ ” button. Press

OK to view menu contents.

• Select Favourites to manage favourite list. Use “

”/“ ” and OK buttons to select Favourites .

• You can set various channels as favourites so that only the favourite channels are navigated.

• Select a channel by using “ ” or “ ” button. Press

OK button to add selected channel to favourites list.

Press OK button again to remove.

Button Functions

• OK : Add/remove a station.

• YELLOW : Tag/untag a channel.

• GREEN : Tag/untag all channels.

• BLUE : Displays fi ltering options.

Managing Stations: Sorting

Channel List

You can select broadcasts to be listed in the channel list. To display speci fi c types of broadcast, you should use Active channel list setting.

Select Active channel list from the Channel list menu by using “ ” or “ ” button. Press OK button to continue.

You can select a broadcast type option from the list by using “ ” /“ ” and OK buttons.

English - 15 -


On-Screen Information

You can press INFO button to display on-screen information. Details of the station and current programme will be displayed on the information banner.

Viewing Videos via USB

The information banner gives information on the channel selected and the programmes on it. The name of the channel is displayed, along with its channel list number. Hint: Not all channels broadcast the programme data. If the name and time of the programme are not available, then information banner will be displayed with blanks.

If the selected channel is locked, you must enter the correct four-digit numeric code to view the channel

(default code is 0000 ). “ Enter PIN ” will be displayed on the screen in such a case:

Media Playback Using Media

Browser

If the USB stick is not recognized after power off/on or First Time Installation, fi rst, plug the USB device out and power off/on the TV set. Plug the USB device in again.

To display Media Browser window, press either

“ MENU ” button on the remote control and then select

Media Browser by pressing “ ” or “ ” button. Press

OK button to continue. Media Browser menu options will be displayed.

Also, when you plug USB devices, the media browser screen will be displayed automatically:

When you select Videos from the main options, the available video fi les will be fi ltered and listed on this screen. You can use “ ” or “ ” button to select a video fi le and press OK button to play a video. If you select a subtitle fi le and press OK button, you can select or deselect that subtitle fi le. The following menu will be displayed while playing a video fi le:

Play ( button) : Starts the video playback.

Stop ( button) : Stops the video playback.

Pause ( button) : Pause the video playback.

Rewind ( button) : Goes backward.

Forward ( button) : Goes forward.

Subtitle/Audio (LANG. button) : Sets subtitle/Audio.

Yellow : Opens subtitle time correction menu

You can play music, picture and video fi connected USB memory stick. Use “ ” or “ ” button to select Videos, Photos, Music or Settings.

Press RETURN (Exit) button to switch back to previous menu.

Viewing Photos via USB

When you select Photos from the main options, available image fi les will be ltered and listed on this screen.

English - 16 -


Jump (Numeric buttons) :Jump to selected fi the numeric buttons.

OK : Views the selected picture in full screen.

Slideshow (GREEN button) : Starts the slideshow using all images.

Loop/Shuf fl : Press once to enable

Loop. Press again to enable both Loop and Shuf fl e.

Press once more to enable only Shuf fl e. Press again to disable all. You can follow the disabled functions with the change of the icons.

FAV : Sorts fi les by date.

TEXT : Views images in thumbnails.

INFO : Changes fi

Slideshow Options

RED button : Sorts fi les by date.

YELLOW button : Toggles viewing style.

BLUE button : Changes media type.nge of the icons.

Media Browser Settings

Pause ( button) : Pauses the slideshow.

Continue ( button) : Continues the slideshow.

Previous/Next (Left/Right buttons) : Jumps to previous or next fi le on slideshow.

Rotate (Up/Down buttons) : Rotates the image using up/down buttons.

Loop/Shuf fl e (GREEN button) : Press once to disable

Loop. Press again to disable both Loop and Shuf fl e.

Press once more to enable only Shuf fl e. Press again to enable all. You can follow the disabled functions with the change of the icons.

RETURN (Exit) : Back to fi le list.

INFO : Displays help screen.

Playing Music via USB

When you select Music from the main options, available audio fi les will be fi ltered and listed on this screen.

You can set your Media Browser preferences by using the Settings dialog. Press “ ” or “ ” button to highlight an item and use “ ” or “ ” button to set.

View Style: Sets default browsing mode.

Slide Show Interval: Sets slide show interval time.

Show Subtitle: Sets subtitle enabling preference.

Subtitle Language: Sets supported subtitle language.

Subtitle Position: Sets subtitle position as up or down.

Subtitle Font Size: Sets subtitle font size (max.

54pt).

0...9 (Jump) (Numeric buttons) : Jump to selected fi le using the numeric buttons.

OK : Views the selected picture in full screen.

Slideshow ( button) : Starts the slideshow using all images.

GREEN button : Views images in thumbnails.

English - 17 -


Changing Image Size: Picture

Formats

• Programmes can be watched in different picture formats, depending on the transmission received.

• You can change the aspect ratio (image size) of the TV for viewing the picture in different zoom modes.

• Press SCREEN button repeatedly to change the image size. Available zoom modes are listed below.

Auto

When a WSS (Wide Screen Signalling) signal, which shows the aspect ratio of the picture, is included in the broadcast signal or the signal from an external device, the TV automatically changes the ZOOM mode according to the WSS signal.

• When the AUTO mode does not function correctly due to poor WSS signal quality or when you want to change the ZOOM mode, change to another ZOOM mode manually.

16:9

This uniformly stretches the left and right sides of a normal picture (4:3 aspect ratio) to fi ll the wide TV screen.

14:9

This zooms up the wide picture (14:9 aspect ratio) to the upper and lower limits of the screen.

14:9 Zoom

This option zooms to the 14:9 picture.

4:3

Use to view a normal picture (4:3 aspect ratio) as this is its original size.

Panoramic

This stretches the left and right sides of a normal picture (4:3 aspect ratio) to fi ll the screen, without making the picture appear unnatural.

• For 16:9 aspect ratio pictures that have been squeezed into a normal picture (4:3 aspect ratio), use the 16:9 mode to restore the picture to its original shape.

Subtitle

This zooms up the wide picture (16:9 aspect ratio) with subtitles to the full screen.

The top and bottom of the picture are slightly cut off.

Cinema

This zooms up the wide picture (16:9 aspect ratio) to the full screen.

Note : You can shift to screen up or down by pressing

“ ” / “ ” buttons while picture zoom is selected as panaromic, 14:9 Zoom, Cinema or Subtitle.

Note: When the unitis in ‘Auto’ mode and a 4:3 transmission is being received the picture may not fi ll the screen (i.e. there is a border on the top/bottom and left/right). To fi ll the screen select either 4:3 or

16:9 manually as required.

English - 18 -


Con

fi

guring Picture Settings

You can use different picture settings in detail.

Press MENU button and select the Picture icon by using “ ” or “ ” button. Press OK button to view

Picture Settings menu.

Operating Picture Settings Menu Items

• Press “

• Use “

” or “ ” button to highlight a menu item.

” or “ ” button to set an item.


Picture Settings Menu Items

Mode : For your viewing requirements, you can set the related mode option. Picture mode can be set to one of these options: Cinema , Game , Dynamic and Natural .

Contrast : Sets the lightness and darkness values of the screen.

Brightness : Sets the brightness value for the screen.

Sharpness : Sets the sharpness value for the objects displayed on the screen.

Colour : Sets the colour value, adjusting the colours.

Colour Shift: Adjust the desired colour tone.

Colour Temp : Sets the desired colour tone.

Setting Cool option gives white colours a slight blue stress.

For normal colours, select Normal option.

Setting Warm option gives white colours a slight red stress.

Noise Reduction : If the broadcast signal is weak and the picture is noisy, use Noise Reduction setting to reduce the noise amount. Noise Reduction can be set to one of these options: Low , Medium , High or Off .

Game Mode: When Game Mode is set to On, speci fi game mode settings, which are optimized for better video quality, will be loaded.

Note: When Game Mode is on, some items in the

Picture Settings menu will be unavailable.

Picture Zoom :Sets the picture size to Auto,16:9,

Subtitle,14:9, 14:9 Zoom, 4:3, Panoramic or Cinema.

Reset : Resets the picture settings to factory default settings.

While in VGA (PC) mode, some items in Picture menu will be unavailable. Instead, VGA mode settings will be added to the Picture Settings while in PC mode.

PC Picture Settings

For adjusting PC picture items, do the following:

Press “ ” or “ ” button to select Picture icon. Picture menu appears on the screen.

Contrast, Brightness, Colour, Colour Temp and

Picture Zoom settings in this menu are identical to settings de fi ned in TV picture menu under “Main

Menu System”.

Sound, Settings and Source settings are identical to the settings explained in main menu system.

PC Position : Select this to display PC position menu items.

Autoposition : Automatically optimizes the display.

Press OK to optimize.

H Position : This item shifts the image horizontally to right hand side or left hand side of the screen.

V Position : This item shifts the image vertically towards the top or bottom of the screen.

Dot Clock : Dot Clock adjustments correct the interference that appear as vertical banding in dot intensive presentations like spreadsheets or paragraphs or text in smaller fonts.

Phase : Depending on the resolution and scan frequency that you input to the TV set, you may see a hazy or noisy picture on the screen. In such a case you can use this item to get a clear picture by trial and error method.

English - 19 -


Con

fi

guring Sound Settings

Sound settings can be con fi personal preferences.

Press MENU button and select the Sound icon by using “ ” or “ ” button. Press OK button to view the

Sound Settings menu.

Headphone : Sets headphone volume.

• When headphones are connected to the device, the internal speakers of the TV will mute and the volume of the headphones can be adjusted via sound settings/headphones.

AVL : Automatic Volume Limiting (AVL) function sets the sound to obtain fi xed output level between programmes

(For instance, volume level of advertisements tend to be louder than programmes).

Dynamic Bass : Dynamic Bass is used to increase bass effect of the TV set.

Digital Out : Sets digital out audio type.

Con

fi

guring Your TV’s Settings

Detailed settings can be configured to suit your personal preferences.

Press MENU button and select Settings icon by using “ ” or “ ” button. Press OK button to view the

Settings menu.

Operating Sound Settings Menu Items

• Press “

• Use “

” or “ ” button to highlight a menu item.

” or “ ” button to set an item.


Sound Settings Menu Items

Volume : Adjusts volume level.

Equalizer : Press OK button to view the equalizer sub-menu.

In the equalizer menu, the preset can be changed to Music , Movie , Speech , Flat , Classic and User .

Press the MENU button to return to the previous menu.

Note : Equalizer menu settings can be changed manually only when the Equalizer Mode is in User .

Balance : This setting is used for emphasizing left or right speaker balance.

Operating Settings Menu Items

• Press “ ” or “ ” button to highlight a menu item.

• Press OK button to select an item.


Settings Menu Items

Conditional Access : Controls conditional access modules when available.

Language : Con fi gures language settings.

Parental : Con fi gures parental settings.

Timers : Sets timers for selected programmes.

Date/Time : Sets date and time.

Sources : Enables or disables selected source options.

Other Settings : Displays other setting options of the TV set.

English - 20 -


Using a Conditional Access

Module

IMPORTANT: Insert or remove the CI module only when the TV is SWITCHED OFF.

• In order to watch certain digital channels, a conditional access module (CAM) can be necessary. This module must be inserted in the CI slot of your TV.

• Obtain the Conditional Access Module (CAM) and the viewing card by subscribing to a pay channel company, then insert both into the TV using the following procedure.

• Insert the CAM and then the viewing card to the slot that is located in the terminal cover at the rear side of the TV.

• The CAM should be correctly inserted, it is impossible to insert fully if reversed. The CAM or the TV terminal may be damaged if the CAM is forcefully inserted.

Connect the TV to the mains supply, switch on and then wait for few moments until the card is activated.

• When no module is inserted, “ No Common

Interface module detected ” message appears on the screen.

• Refer to the module instruction manual for details of the settings.

Viewing Conditional Access Menu (*)

(*) These menu settings may change depending on the service provider.

Press MENU button and select the icon by using “

” or “ ” button. Press OK button to view Settings menu. Use “ ” or “ ” button to highlight Conditional

Access and press OK to view menu items.

Con

fi

guring Language

Preferences

You can operate the TV’s language settings using this menu.

Press MENU button and select the Settings icon by using “ ” or “ ” button. Press OK button to view

Settings menu. Use “ ” or “ ” button to highlight

Language and press OK to continue:

Use “ ” or “ ” button to set an item. Settings are stored automatically.

Menu : displays the system language.

Preferred

These settings will be used if available. Otherwise the current settings will be used.

• Audio : Sets the preferred audio language.

• Subtitle : Sets the subtitle language. Selected language will be seen in subtitles.

• Teletext : Sets teletext language.

• Guide : Sets the preferred Guide language.

Current (*)

(*) These settings can be changed only if the broadcaster supports them. Otherwise, settings will not be available to be changed.

• Audio : Changes the audio language for the current channel.

• Subtitle : Sets the subtitle language for the current channel.

Note : If the Country option is set to Denmark, Sweden,

Norway or Finland, the Language Settings menu will function as described below:

English - 21 -


Language Settings

In the con fi guration menu, highlight the Language

Settings item by pressing “ ” or “ ” buttons. Press

OK and Language Settings submenu will be displayed on the screen:

Use “ ” or “ ” buttons to highlight the menu item that will be adjusted and then press “ ” or “ ” button to set.

Notes:

• System Language determines the on-screen menu language.

• Audio Language is used for selecting the soundtrack of a channels.

• Primary settings are the fi rst priority when multiple choices are available on a broadcast. Secondary settings are the alternatives when the fi rst options are not available.

Parental Control

To prohibit viewing of certain programmes, channels and menus can be locked by using the parental control system.

This function enables or disables the menu protection system and allows the PIN code to be changed.

Press the MENU button and select the Settings icon by using “ ” or “ ” button. Press OK button to view

Settings menu. Use “ ” or “ ” button to highlight

Parental and press OK to continue:

To display the parental lock menu options, the PIN number should be entered. The factory default PIN number is 0000 . After coding the correct PIN number, the parental settings menu will be displayed:

Parental Settings Menu Operation

• Select an item by using “ ” or “ ” button.

• Use “ ” or “ ” button to set an item.

• Press the OK button to view more options.

Menu Lock : Menu lock setting enables or disables the menu access. You can disable access to the installation menu or the whole menu system.

Maturity Lock (optional) : When set, this option gets the maturity information from the broadcast and if this maturity level is disabled, disables access to the broadcast.

Child Lock (optional) : When Child Lock is set, the TV can only be controlled by the remote control. In this case the control panel buttons will not work, except for the Standby On/Off button. When Child Lock is activated you are able to switch the TV into Standby mode with the Standby On/Off button. To switch the

TV on again, you need the remote control. Hence, if one of those buttons is pressed, Child Lock Is On will be displayed on the screen when the menu screen is not visible.

Set PIN : De fi nes a new PIN number. Use the numeric buttons to enter a new pin number. You will need to code your new pin a second time for veri fi cation purposes.

IMPORTANT : The factory default pin number is 0000 , if you change the pin number make sure you write it down and keep it safe.

Timers

To view the Timers menu, press MENU button and select Settings icon by using “ ” or “ ” button.

Press OK button to view Settings menu. Use “ ” or “ ” button to highlight Timers and press OK to continue:

Setting Sleep Timer

This setting is used for setting the TV to turn off after a certain time.

• Highlight Sleep Timer by using “ ” or “ ” button.

• Use “ ” or “ ” button to set. The timer can be programmed between Off and 2.00

hours (120 minutes) in steps of 30 minutes.

English - 22 -


Setting Programme Timers

You can set programme timers for a particular programme using this feature.

Press “ ” button to set timers on an event. Programme timer function buttons will be displayed on the screen.

Adding a Timer

• Press YELLOW button on the remote control to add a timer.

Channel : Changes network type by using “ ” or “ ”.

Timer Type : This feature is unavailable to be set.

Date : Enter a date using the numeric buttons.

Start: Enter a starting time using the numeric buttons.

End : Enter an ending time using the numeric buttons.

Duration : Displays duration between the starting and ending time.

Repeat : Sets a timer to be repeated as Once, Daily or

Weekly. Use “ ” or “ ” buttons to select an option.

• Press GREEN button to save the timer. Press RED button to cancel.

Change/Delete: Controls parental settings on timers.

Editing a Timer

• Select the timer you want to edit by pressing “ or “ ” button.

”

• Press GREEN button. Edit Timer menu screen will be displayed.

• When fi nished with editing, press GREEN button to save. You can press MENU button to cancel.

Deleting a Timer

• Select the timer you want to delete by pressing “

” or “ ” button.

• Press RED button.

• Select YES by using “ ” or “ ” buttons to delete the timer. Select NO to cancel.

Con

fi

guring Date/Time

Settings

Select Date/Time in the Settings menu to con fi gure

Date/Time settings. Press OK button.

• Use “ ” or “ ” buttons to highlight Date / Time.

Date,Time,Time Settings Mode and Time Zone Setting will be available.

Use “ ” or “ ” buttons to highlight the Time Settings

Mode. Time Settings Mode is set using “ ” or “ ” buttons. It can be set to AUTO or MANUAL.

When AUTO is selected, Date/Time and Time Zone options will not be available to be set. If MANUAL option is selected as the Time Zone can be altered:

• By pressing “ ” or “ ” buttons select Time Zone.

Use “ ” or “ ” buttons to change the Time Zone between GMT-12 or GMT+12. Date/Time on the top of the menu list will then change according to the selected Time Zone.

• Changes are automatically stored. Press MENU to exit.

Con

fi

guring Source Settings

Allows you to enable or disable selected source options.

The TV will not switch to the disabled source options when SOURCE button is pressed.

English - 23 -


• Select button.

Sources in the Settings menu and press OK

• Press“ ” or “ ” buttons to select a source.

• Use “ ” or “ ” button to enable or disable the selected source. Changes are automatically stored.

Note : YPbPr mode can be used only when you connect a device that has a YPbPr output through the

PC input with YPbPr to PC cable (not supplied).

Con

fi

guring Other Settings

To view general con fi Other

Settings in the Settings menu and press OK button.

Operation

• Press “ ” or “ ” buttons to select an item.

• Use “ ” or “ ” button to set an option.

• Press OK button to view a sub-menu.

Menu Timeout : Changes timeout duration for menu screens.

Scan Encrypted : When this setting is on, search process will locate the encrypted channels as well. If it is set as Off , encrypted channels will not be located in automatic search or manual search.

Backlight (optional): This setting controls the backlight level and it can be set to Auto, Maximum,

Minimum, Medium and Eco Mode (optional).

Power Save Mode: Use “ ” or “ ” button to select

Power Save Mode.Press “ ” or “ ” button to set

Power Save Mode as On or Off.

See the section, “Environmental Information” in this manual for further information on Power Save

Mode.

Note : Backlight function will be invisible if Power Save

Mode is set to on.

Blue Background : Activates or deactivates blue background system when the signal is weak or absent.

Software Upgrade : To ensure that your TV always has the most update information, you can use this setting.

You can enable or disable automatic upgrade by setting Automatic Scanning option.

You can manually search for new software by selecting Scan for upgrade .

In order for any software upgrade to take place, please ensure that the TV is set to standby mode

Hard of Hearing : If the broadcaster enables any special signal concerning the audio, you can set this setting as On to receive such signals.

Audio Description : Audio description refers to an additional narration track for blind and visually impaired viewers of visual media, including television and movies. The description narrator talks through the presentation, describing what is happening on the screen during the natural pauses in the audio (and sometimes during dialogue, if deemed necessary).

You can use this feature, only if the broadcaster supports that additional narration track.

Auto TV Off: You can set the timeout value of auto off feature. After the timeout value is reached and the TV is not operated for selected time, the TV will go off.

Standby Search (optional): Use “ ” or “ ” button to select Standby Search and then press “ ” or “

” button to set this setting as On or Off. If you change Standby Search to Off, this function will be unavailable. To use Standby search please make sure that you select Standby Search as On.

If the Standby Search is set to On, when the TV is in standby mode, available broadcasts will be searched.

If the TV locates any new or missing broadcasts, a menu screen will be displayed, asking you whether or not to execute these changes.

English - 24 -


Other Features

Displaying TV Information : Programme Number,

Programme Name, Sound Indicator, time, teletext, channel type and resolution information is displayed on the screen when a new programme is entered or

“ INFO ” button is pressed.

Mute Function : Press “ ” button to disable sound.

Mute indicator will be displayed in the upper side of the screen. To cancel mute, there are two alternatives; the rst one is pressing the “ ” button and the second one is increasing the volume level.

Picture Mode Selection : By pressing PRESETS button, you can change Picture Mode settings in accordance with your viewing requirements. Available options are Dynamic, Natural, Cinema and Game.

Displaying Subtitles : You can enable subtitles by pressing the SUBTITLE button of the remote control.

Press the SUBTITLE button again to disable the subtitle function.

If “ Subtitle ” is On , pressing the “ ” button causes the following warning message display on the screen (** for UK only)

Teletext

The teletext system transmits information such as news, sports and weather on your TV. Note that if the signal degrades, for example in poor/adverse weather conditions, some text errors may occur or the teletext mode may be aborted.

Teletext function buttons are listed below:

“ ” Teletext / Mix : Activates teletext mode when pressed once. Press again to place the teletext screen over the programme (mix). Pressing again will quit the teletext mode.

“RETURN” Index : Selects the teletext index page.

“INFO”Reveal : Shows hidden information (e.g. solutions of games).

“OK” Hold : Holds a text page when convenient. Press again to resume.

“ ”/“ ” Subcode Pages : Selects subcode pages if available when the teletext is activated.

P+ / P- and numbers (0-9) : Press to select a page.

Note : Most TV stations use code 100 for their index pages.

Coloured Buttons (RED/GREEN/YELLOW/

BLUE)

Your TV supports both FASTEXT and TOP text systems. When these systems are available, the pages are divided into groups or topics. When

FASTEXT system is available, sections in a teletext page will become colour-coded and can be selected by pressing the coloured buttons. Press a coloured button that corresponds to with your needs. The coloured writings will appear, showing you which coloured buttons to use when TOP text transmission is present. Pressing “ ” or “ ” commands will request the next or previous page respec tively.

Digital Teletext (** for UK only)

• Press the “ ” button.

• The digital teletext information appears.

• Operate it with the coloured buttons, cursor buttons and OK button.

The operation method may differ depending on the contents of the digital teletext.

Follow the instructions displayed on digital teletext screen.

• When Press “ OK ” button or similar message appears on the screen, press the OK button.

• When the “ ” button is pressed, the TV returns to television broadcasting.

• With digital terrestrial broadcasting (DVB-T), in addition to digital teletext broadcasting together with the normal broadcasting, there are also channels with just digital teletext broadcasting.

• The aspect ratio (picture shape) when watching a channel with just digital teletext broadcasting is the same as the aspect ratio of the picture viewed previously.

• When you press the “ ” button again, the digital teletext screen will be displayed.

Analogue Teletext

Use of teletext and its functions are identical to the analogue text system. Please do refer to the

“ TELETEXT ” explanations.

English - 25 -


Tips

Screen Care : Clean the screen with a slightly damp, soft cloth. Do not use abrasive solvents as they may damage the coating layer of the TV screen. For your safety, unplug the mains plug when cleaning the set. When moving the TV, hold it properly from the bottom.

Image Persistence : Please note that ghosting may occur while displaying a persistent image. LED TVs’ image persistence may disappear after a short time.

Try turning off the TV for a while.

To avoid this, do not leave the screen on a still picture image for extended periods.

No Power : If your TV system has no power, please check the main power cable and connection to the mains socket outlet.

Poor Picture : Have you selected the correct TV system? Is your TV set or house aerial located too close to a non-earthed audio equipment or neon lights, etc.?

Mountains or high buildings can cause double pictures or ghost images. Sometimes you can improve the picture quality by changing the direction of the aerial.

Is the picture or teletext unrecognisable? Check if you have entered the correct frequency. Please retune the channels. The picture quality may degrade when two peripherals are connected to the TV at the same time.

In such a case, disconnect one of the peripherals.

No Picture : Is the aerial connected properly? Are the plugs connected tightly to the aerial socket? Is the aerial cable damaged? Are suitable plugs used to connect the aerial? If you are in doubt, consult your dealer. No Picture means that your TV is not receiving a transmission. Have you selected the correct button on the remote control? Try once more. Also make sure the correct input source has been selected.

Sound : If you cannot hear any sound, check if the button has been pressed, or check if there are any headphones plugged into the TV. If sound is coming only from one of the speakers, check if the balance is set to one extreme.

Remote Control : Your TV no longer responds to the remote control. Perhaps the batteries are exhausted.

If so you can still use the local buttons on the TV and replace the batteries in the remote control..

Input Sources : If you cannot select an input source, it is possible that no device is connected. Check the AV cables and connections if you have tried to connect a device

English - 26 -


Appendix A: PC Input Typical

Display Modes

The display has a maximum resolution of 1360x768.

The following table is an illustration of some of the typical video display modes. Your TV may not support different resolutions. Supported resolution modes are listed below. If you switch your PC to an unsupported mode, a warning OSD will appear on the screen.

5

6

7

8

9

Index

1

2

3

4

10

11

12

Resolution

640x400

640x480

640x480

800x600

800x600

1024x768

1024x768

1024x768

1152x864

1280x768

1280x1024

1360x768

Frequency

70 Hz

60 Hz

75 Hz

60 Hz

75 Hz

60 Hz

70 Hz

75 Hz

75 Hz

60 Hz

60 Hz

60 Hz

Appendix B: AV and HDMI Signal

Compatibility (Input Signal Types)

Source

EXT

(SCART )

Side AV

YPbPr

HDMI

576P

720P

720P

1080I

1080I

1080P

1080P

1080I

1080I

1080P

1080P

480I

480P

576I

Supported Signals Available

PAL 50/60 O

NTSC 60

RGB 50

O

O

RGB 60

PAL 50/60

NTSC 60

480I 60Hz

O

O

O

O

480P

576I

576P

720P

720P

60Hz

50Hz

50Hz

50Hz

60Hz

O

O

O

O

O

50Hz

60Hz

50Hz

60Hz

60Hz

60Hz

50Hz

50Hz

50Hz

60Hz

50Hz

60Hz

50Hz

60Hz

O

O

O

O

O

O

O

O

O

O

O

O

O

O

1080P 24Hz O

(X: Not Available, O: Available)

In some cases a signal on the LCD TV may not be displayed properly. The problem may be an inconsistency with standards from the source equipment (DVD, Set-top box, etc. ). If you do experience such a problem please contact your dealer and also the manufacturer of the source equipment.

English - 27 -


Appendix C: Supported DVI Resolutions

When connecting devices to your TV’s connectors by using DVI converter cables (not supplied), you can refer to the following resolution information.

24Hz 25Hz 30Hz 50Hz 60Hz

;

;

480i

480p

576i

576p

720p

1080i

1080p ; ; ;

;

;

;

;

;

;

;

;

Appendix D: Supported File Formats for USB Mode

Player

Audio

Audio

MPEG1 Program

Stream

MPEG2 Program

Stream

Stream

MP3

WAV/AIFF

Supported Players

Video Decoder (MSVD) Audio Decoder (MSAD)

None

None--

MP3

LPCM

MPEG-1

MPEG-2

MPEG1

MPEG2

MP3, AC-3 and PCM

MP3, AC-3 and PCM

AVI (Xvid) XVID MPEG2 MP3, AC-3 and PCM

English - 28 -


Appendix E: Software Upgrade

• Your TV is capable of fi nding and updating new software upgrades over broadcast channels.

• For broadcast channels search, the TV looks at the available channels stored in your settings. So before software upgrade search, it is advised to auto search and update all available channels.

1) Software upgrade search via user interface

• It is possible manually to check if there is a new software upgrade for your TV set.

• Simply navigate on your main menu. Choose Settings and select Other Settings menu. In Other Settings menu navigate on to the Software Upgrade item and press OK button to open Upgrade Options menu.

• In Upgrade Options menu select Scan for upgrade and press OK button.

• If a new upgrade is found, it starts to download the upgrade. A progress bar indicates the remaining download progress. When the download is completed a message is displayed to reboot and activate the new software.

Press OK to continue with the reboot operation.

2) Over Air Download (OAD)

• If Automatic scanning in Upgrade Options menu is enabled, the TV wakes up at 03:00 and searches broadcast channels for a new software upgrade. If new software is found and downloaded successfully, upon the next power up the TV opens with latest software version.

Note on reboot operation : Reboot is the last step in software upgrade operation if download of new software is fi nished successfully. During reboot the TV makes fi nal initializations. In the reboot sequence the panel power is closed and front led indicates the activity with blinking. Around 5 minutes later the TV restarts with new software activated.

• If your TV fails to restart in 10 minutes, unplug power for 10 minutes and re-plug again. The TV should open with new software safely. If you still cannot get the TV working, please kindly repeat unplug and plug sequence a few times more. If your TV set still will not operate, please call the service personnel to fi x the problem for you.

Caution: While led is blinking during reboot do not unplug your TV’s power. Doing this may cause your TV not to re-start again and can only be fi

Battery

Information for Users on Disposal of old Equipment and

Batteries

[European Union only]

These symbols indicate that equipment with these symbols should not be disposed of as general household waste. If you want to dispose of the product or battery, please consider the collection systems or facilities for appropriate recycling.

Notice : The sign Pb below the symbol for batteries indicates that this battery contains lead.

Products

English - 29 -


Speci

fi

cations

TV BROADCASTING

PAL/SECAM B/G D/K K’ I/I’ L/L’

RECEIVING CHANNELS

VHF (BAND I/III)

UHF (BAND U)

HYPERBAND

NUMBER OF PRESET CHANNELS

1000

CHANNEL INDICATOR

On Screen Display

RF AERIAL INPUT

75 Ohm (unbalanced)

OPERATING VOLTAGE

110-240V AC, 50/60 Hz.

AUDIO

Nicam Stereo

AUDIO OUTPUT POWER (W

RMS.

) (10% THD)

2 x 2,5

POWER CONSUMPTION (W)

20 W (max)

< 1 W (Standby)

PANEL

16” Wide Screen

DIMENSIONS (mm)

DxLxH (With foot): 118 x 390 x 286

Weight (Kg): 2,40

DxLxH (Without foot): 49,9 x 390 x 256

Weight (Kg): 2,20

MHEG-5 ENGINE compliant with ISO/IEC 13522-5 UK engine Pro fi le 1

Object carousel support compliant with ISO/IEC 135818-6 and UK DTT pro fi le

Frequency range: 474-850 MHz for UK models for UK

Digital

Reception

170-862 MHz for EU models

Transmission standard: DVB-T. MPEG-2

Demodulation: COFDM with 2K/8K FFT mode

FEC: all DVB modes

Video: MP@ML, PAL, 4:3/16:9

Audio: MPEG Layer I&II 32/44.148kHz.

English - 30 -


MOBIL TV INSTRUCTION MANUAL

Switching the TV On Using 12 Volt

1.

2.

Connect the cigarette lighter plug cable to the cigarette lighter socket of your car or a cable with clips to the battery of car, making sure to observe the correct polarity.

Plug the other side of 12 volt cable to DC 12 socket at the back of the TV. Then the standby LED lights up.

3.

4.

Press the “ ” button, P+ / P- or a numeric button on the remote control or press the “ ” button, -P/

CH or P/CH+ button on the TV. The TV will then switch on.

Adjust for best picture through antenna position or set TV channels again if necessary.

Switching the TV Off

1.

2.

Press the “ ” button on the remote control or press the “ ” switch on the TV, so the TV will switch to standby mode.

Unplug cable connectors and power plugs.

V+ V+

ATTENTION: 12 V Input :

VV-

English - 31 -


Important Instruction

For your own safety read following instruction carefully before attempting to connect this unit to the mains supply.

CAUTION

TO PREVENT ELECTRIC SHOCK DISCONNECT FROM THE MAINS BEFORE REMOVING

COVER. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

SAFETY PRECAUTION

THIS EQUIPMENT MUST BE DISCONNECTED FROM THE MAINS WHEN NOT IN USE. DO NOT

ALLOW THIS UNIT TO BE EXPOSED TO RAIN OR MOISTURE.

English - 32 -


Contents

Features ............................................................... 33

General Properties............................................ 33

Safety Information ................................................ 34

Notes on Discs ..................................................... 34

On handling discs ............................................. 34

On cleaning....................................................... 34

Licence Noti fi cation .............................................. 34

How to Watch a DVD ............................................ 34

DVD Control Panel Buttons .................................. 35

Overview of the Remote Control .......................... 35

General Operation ................................................ 36

General Playback ................................................. 37

Basic Play ......................................................... 37

For your reference: ....................................... 37

Notes on Playback: ........................................... 37

Setup Menu Items ................................................ 37

V ı deo Setup Page............................................. 37

TV Type ......................................................... 37

Language Setup ............................................... 37

OSD LANG ................................................... 37

AUDIO .......................................................... 37

DISC MENU .................................................. 37

SUBTITLE ..................................................... 37

Preferences ...................................................... 38

DEFAULT ...................................................... 38

DOWNMIX .................................................... 38

PASSWORD (Change Password): ............... 38

SPDIF OUTPUT ............................................ 38

Troubleshooting .................................................... 38

The picture quality is poor (DVD)...................... 38

Disc does not play ............................................ 38

Wrong OSD language ....................................... 38

Some functions (Angle, Zoom etc) do not work ... 39

No picture ......................................................... 39

No sound .......................................................... 39

Distorted sound................................................. 39

No response from remote control ..................... 39

If nothing works................................................. 39

De fi nition of Terms ................................................ 39

Disc Types Compatible with This Unit .................. 40

Speci fi cations ....................................................... 40

Features

General Properties

• DVD / CD / CD-R / CD-RW / MP3 / JPEG / MPEG playback.

• NTSC/PAL playback (according to disc content)

• LPCM audio via coaxial digital audio output.

(optional).

• Multi-Audio (up to 8) support (According to disc content)

• Multi-Subtitle (up to 32) support (According to disc content)

• Multi-Angle (up to 9) support (According to disc content)

• 8 level parental control

• Fast forward and rewind in 5 different speeds. (2x,

4x, 8x, 16x, 32x)

• Slow motion playback in 4 different speeds. (1/2x,

1/4x, 1/8x, 1/16x forward)

• Frame by frame forward playback.

• Search Mode

• Repeat

• Coaxial audio output (optional)

• Copied disks may be incompatible.

Note

• This DVD player may not support some MP3 recordings due to differences in recording formats or disc type.

• Please read the owner’s manual about MP3 playback.

• CD-R/CD-RW discs recorded by CD-DA method can be played. Some CD-R/CD-RW discs may be incompatible due to laser pick-up and disc design.

• DVD-R/RW discs recorded by DVD-Video method can be played . Some DVD-R/RW discs may be incompatible due to laser pick-up and disc design.

• Some discs may be incompatible with JPEG Viewer function due to different recording format or condition of the discs.

English

- 33 -


Safety Information

CAUTION

DVD Player is a class 1 laser product. However this product uses a visible laser beam which could cause hazardous radiation exposure. Be sure to operate the player correctly as instructed.

On cleaning

• Before playing, clean the disc with a cleaning cloth.

Wipe the disc from the center out.

CLASS 1

LASER PRODUCT

RISK OF ELECTRIC SHOCK

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of suf fi cient magnitude to constitute a risk of electric shock of persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

Notes on Discs

On handling discs

• To keep the disc clean, handle the disc by its edge.

Do not touch the surface.

• Do not stick paper or tape on the disc.

• If the disc is contaminated with any substance like glue remove before using it.

• Do not use solvents such as benzine, thinner, commercially available cleaners or anti-static spray intended for vinyl LPs.

Licence Noti

fi

cation

• This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Rovi Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Rovi Corporation. Reverse engineering and disassembly are prohibited.

How to Watch a DVD

When placing a disc into the loader, labeled side of the disc should be on the front:

• Do not expose the disc to direct sunlight or heat sources such as hot air ducts, or leave it in a car parked in direct sunlight as the temperature can rise quickly and damage the disc.

• After playing, store the disc in its case.

When TV set is turned on, fi rst switch to DVD source by using the SOURCE button on the remote control.

Press play on the remote control, or directly press play button at the front panel. If there is no disc inside the loader, place a DVD fi

English

- 34 -


DVD Control Panel Buttons

A. Disc loader

B. Play / Pause

Plays/pauses the disc. When DVD menu (root menu) is active, this button functions as “button select” (selects the highlighted item in menu) if this is not prohibited by the disc.

C. Stop / Eject

Stop playing disc / Eject or Load the disc Note:

• You cannot eject the disc via the remote control.

• While playing a fi le, you should press STOP button three times to eject.

Overview of the Remote Control

1.

2.

3.

4.

5.

6.

Standby

Numeric buttons

Return back

Language selection (Set language)

Display time / DVD menu

Clear

7.

8.

Stop

No function

9. Rapid Reverse

10. Rapid advance

11. Info

12. Zoom

13. Repeat

14. Root

15. Menu

16. Title

17. OK / Select

18. Navigation Buttons

19. Subtitle

20. Angle

21. Search mode

22. Play

23. Pause

24. Skip next

25. Skip previous

INFO

SLEEP SCREEN SOURCE PRESETS

RETURN MENU

FAV LANG.

SUBTITLE

EPG /

English

- 35 -


General Operation

You can operate DVD, movie CD, music or picture CD’s content by using the proper buttons on your remote control. Below are main functions of commonly used remote control buttons.

Buttons on the

Remote Control

DVD

Playback

Movie

Playback

Picture

Playback

Music

Playback

/

/

/

/

ANGLE

C

DISPLAY

INFO

LANG.

MENU

OK / SELECT

REPEAT

RETURN

ROOT

SEARCH MODE (*)

SUBTITLE

Skip backward/forward

Skip backward/forward

Previous / Next Previous / Next

Shifts the zoomed picture left or right (if available).

Highlights a menu item. / Shifts the zoomed picture down or up (if available).

Fast reverse / Fast forward

Views the scene from different angles (if available).

Changes slide effect (depends on the content).

Clears digit (if available).

Displays time / Views main setup menu

X

Time counter mode selection (during playback). Press repeatedly to switch between modes.

Audio language. X X

Displays TV menu.

Enter / View / Play

Displays repeat options.

Returns back to the previous menu (if available).

Goes back to the root folder (if available).

Direct selection of scenes or time.

Selects the desired file.

Subtitle on-off. Press repeatedly to switch between subtitle options.

Selects the desired file.

X X

[ + ] +

+

+

+

+

+

TITLE

ZOOM

Displays disc menu

(if available).

Displays disc menu

(if available).

X X

Zooms picture. Press repeatedly to switch between zoom options.

Other Functions – Button Combinations

(During playback)

Slow forward.

Sets slow forward speed.

Sets fast forward speed.

Sets fast reverse speed.

Confirms stop command.

Press repeatedly to advance manually.

(*) You can switch to title by pressing numeric keys directly. You need to press 0 and then digit key to switch one digit titles (example: to select 5, press 0 and 5.

English

- 36 -


General Playback

Basic Play

1. Press on the power button

2. Please insert a disc to the loader.

The disc will be automatically loaded and play commences if the disc does not have any menus recorded on it.

A menu may appear on the TV screen after a few moments or the fi lm may start immediately after the introduction of the Film Company. This behaviour depends on the disc content and may change.

Note : Step 3 and 4 is available only when a menu is recorded on the disc.

3. Press “ ” / “ ” / / or the number button

(s) to select the preferred title.

4. Press SELECT.

Play of the selected items now starts.The played item may be a motion picture, a still picture or another submenu depending on the disc.

For your reference:

If an action corresponding to a button is prohibited the

“ ” symbol appears.

Notes on Playback:

1.

2.

No sound will be heard during Rapid advance or Rapid reverse.

No sound will be heard during Slow motion play.

3.

4.

5.

6.

Reverse slow motion play is not available.

In some cases, the subtitle language is not changed immediately to the selected one.

When the preferred language is not selected even after pressing the button several times, it means that the language is not available on the disc.

When the player is restarted or the disc is changed, the subtitle selection is automatically changed back to the initial settings.

7.

8.

If a language is selected, not supported by the disc, the subtitle language will automatically be set to the disc’s priority language.

Usually a circulation will happen while switching to another language, that is you can cancel the subtitle by pressing this button a number of times until “Subtitle Off” appears on the screen.

9. When the power is turned on or the disc is removed, the language heard is the one selected at the initial settings. If this language is not recorded on the disc, only the available language on the disc will be heard.

10. Some DVDs may not contain root and/or title menus.

11. Reverse stepping is not available.

12. For your convenience:

If you attempt to enter a number greater than the total time of the current title, the time search box disappears and “ Input Invalid” message appears on up-left corner of screen.

13. Slide Show is disabled when the ZOOM mode is on.

Setup Menu Items

V

ı

deo Setup Page

TV Type

TV Type is only available as ‘PAL’. The TV set also supports NTSC signal; however, the signal will be converted to PAL when it appears on the screen.

Language Setup

OSD LANG

You can select the default OSD language of the player menus

AUDIO

You can select the default audio language if supported by the DVD disc.

DISC MENU

You can select the DVD’s disc menu language among these languages. Disc menu appears in the selected language, if supported by the DVD disc.

SUBTITLE

You can select the default subtitle language if supported by the DVD disc.

English

- 37 -


Preferences SPDIF OUTPUT

DEFAULT

If you choose RESET and press SELECT, the factorypresets are loaded. Parental level and parental password does not change.

DOWNMIX

This mode can be selected when the digital audio output of the TV is used.

SURROUND: Surround sound output.

STEREO: Two channels stereo.

PARENTAL (Parental Level)

Playing some DVDs can be limited depending on the age of users. The “Parental Control” function allows playback limitation level to be set by the parent.

Parental Level can be adjusted to one of the eight levels. Level “8 ADULT” adjustment let you watch all of the DVD titles ignoring the DVD disc’s parental level.

You can watch the DVD discs, which has the same or lower parental level than the player’s level only.

PASSWORD (Change Password):

Using this item you can change the current password.

To change the password you will be prompted to enter your old password. After you have entered your old password, you can now enter the new 4-digit password.

You can use C key to delete the incorrect entry.

Note : Factory preset of the password is “0000”. You have to enter XXXX digital password every time you want to change the parental level. If you forget your password please contact technical service.

You can set Spdif Output as PCM or RAW. If you select

PCM from SPDIF Output in DVD menu and play DVD with Dolby audio, you can get audio output with two channels via the speakers and the SPDIF Out. If you select RAW from SPDIF Output in DVD menu and play

DVD with Dolby audio, speakers will be muted and you can get 5+1 Dolby audio via the SPDIF Out.

Troubleshooting

The picture quality is poor (DVD)

• Make sure the DVD disc surface is not damaged.

(Scratch, fi ngerprint etc.)

• Clean the DVD disc and try again.

See instructions described in “Notes on Discs” to clean your disc properly.

• Ensure that the DVD disc is in the drawer with the label uppermost.

• A damp DVD disc or condensation may effect the equipment. Wait for 1 to 2 hours in Stand-by to dry the equipment.

Disc does not play

• No disc in the machine.

Place a disc into the loader.

• Disc incorrectly loaded.

Ensure that the DVD disc is in the drawer with the label uppermost.

• Wrong type of disc. The machine cannot play CD-

ROMS etc.

• The region code of the DVD must match the player.

Wrong OSD language

• Select the language in the set-up menu.

• The language for the sound or subtitles on a DVD cannot be changed.

• Multilingual sound and/or subtitles not recorded on the DVD.

• Try to change the sound or subtitles using DVD’s title menu. Some DVD’s do not allow the user to change these settings without using the disc’s menu

English

- 38 -


Some functions (Angle, Zoom etc) do not work

• These functions are not available on the DVD.

• Angle can only be changed when the angle symbol is displayed.

No picture

• Have you pressed the correct buttons on the remote control? Try once more.

No sound

• Check the volume is set to an audible level.

• Make sure you have not switched the sound off accidentally.

Distorted sound

• Check that the appropriate listening mode setting is correct.

No response from remote control

• Make sure the remote control is in the correct mode.

• Check batteries are fi tted correctly.

• Change the batteries.

If nothing works

If you have tried the above solutions and none seem to work, try switching your TV-DVD off and on again.

If this does not work, contact your supplier or TV-DVD repair technician. Never attempt to repair a defective

TV-DVD yourself.

De

fi

nition of Terms

Angle

Recorded onto some DVD discs are scenes, which have been simultaneously shot from a number of different angles (the same scene is shot from the front, from the left side, from the right side, etc.). With such discs, the ANGLE button can be used to view the scene from different angles.

Chapter Number

These numbers are recorded on DVD discs. A title is subdivided into many sections, each of which are numbered, and speci fi c parts of video presentations can be searched quickly using these numbers.

DVD

This refers to a high-density optical disc on which high-quality pictures and sound have been recorded by means of digital signals. Incorporating a new video compression technology (MPEG II) and high-density recording technology. DVD enables aesthetically pleasing full-motion video to be recorded over long periods of time (for instance, a whole movie can be recorded).

DVD has a structure consisting of two 0.6-mm thin discs, which are adhered to each other. Since the thinner the disc, the higher the density at which the information can be recorded, a DVD disc has a greater capacity than a single 1.2 mm thick disc. Since the two thin discs are adhered to each other, there is the potential to achieve double-sided play sometime in the future for even longer duration play.

Subtitles

These are printed lines appearing at the bottom of the screen, which translate or transcribe the dialogue.

They are recorded on the DVD discs.

Time Number

This indicates the playtime, which has elapsed from the start of a disc or a title. It can be used to fi speci fi c scene quickly. (Not all discs permit the time search feature to be used. Availability is determined by the disc’s manufacturer.)

Title Number

These numbers are recorded on DVD discs. When a disc contains two or more movies, these movies are numbered as title 1, title 2, etc.

Track Number

These numbers are assigned to the tracks, which are recorded on AudioCDs. They enable speci fi c tracks to be located quickly.

LPCM

LPCM stands for Pulse Code Modulation and is digital audio.

MPEG

Short for Moving Picture Experts Group. This is an international standard for compression of moving images. On some DVDs digital audio has been compressed and recorded in this format.

English

- 39 -


Disc Types Compatible with This Unit

D i s c Ty p e s

(L o g o s )

D V D

R e c o r d i n g

Ty p e s

A u d i o

+

V i d e o

D i s c S i z e

1 2 c m

M a x .

P l a y i n g

T i m e

S i n g le s i d e d ; 2 4 0 m i n .

D o u b l e s i d e d ; 4 8 0 m i n .

8 c m

S i n g le s i d e d ; 8 0 m i n .

D o u b l e s i d e d ; 1 6 0 m i n .

•

Va r i o u s s c r e e n a n d a u d i o f u n c t i o n s c a n b e e a s i l y s e l e c t e d t h r o u g h t h e o n s c r e e n m e n u .

C h a r a c t e r i s t i c s

•

D V D c o n t a i n s e x c e l l e n t s o u n d a n d v i d e o d u e t o D o l b y D i g i t a l a n d M P E G - 2 S y s t e m .

A U D I O -C D

1 2 c m 7 4 m i n .

•

C D i s r e c o r d e d a s a

D i g i t a l S i g n a l w i t h b e t t e r a u d i o q u a l i t y, l e s s d i s t o r t i o n a n d l e s s d e t e r i o r a t i o n o f a u d i o q u a l i t y o v e r t i m e .

2 0 m i n .

D I G IT A L A U D I O

A u d i o

8 c m

M P 3 -C D

R E A D A B L E

1 2 c m

A u d i o

(x x x x .m p 3 )

8 c m

•

M P 3 i s r e c o r d e d a s a D i g i t a l S i g n a l w i t h b e t t e r a u d i o q u a l i t y, le s s d i s t o r t i o n a n d l e s s d e t e r i o r a t i o n o f a u d i o q u a l i t y o v e r t i m e .

P IC T U R E -C D

J P E G

R E A D A B L E

V i d e o

(s t i l l p i c t u r e )

1 2 c m

8 c m

•

J P E G i s r e c o r d e d a s a D i g i t a l S i g n a l w i t h b e t t e r p i c t u r e q u a l i t y o v e r t i m e .

Speci

fi

cations

Types of Discs

Supported

Video Type

Audio Type

Audio Output

DVD: SS/SL 4.7” (DVD-5)

SS/DL 4.7” (DVD-9)

DS/SL 4.7” (DVD-10)

CD-DA

CD-R

CD-RW

DS/DL 4.7” (DVD-18) MP-3/JPEG

MPEG-2 Video Standard Decoding (MPEG-1 supported)

Full-Screen Video Display of 720 x 576 (PAL) & 720 x 480 (NTSC) pixels

50 and 60 Hz frame refresh rates (PAL & NTSC)

Digital bit-stream processing rate up to 108Mbits/sec

Line resolution more than 500 lines

MPEG Multichannel Decoding

LPCM

Analog Outputs:

24 bit /48, 44.1kHz down-sampling DAC

English

- 40 -


No results