FS WR-AX1800 Dual-Band Gigabit Wi-Fi 6 Router User Guide
Add to My manuals1 Pages
FS WR-AX1800 is a high-performance dual-band gigabit Wi-Fi 6 router that delivers powerful internet connectivity and exceptional online experiences for your home or office. With the latest Wi-Fi 6 technology, it provides blazing-fast speeds, reduced latency, and increased capacity, allowing you to enjoy seamless 4K video streaming, online gaming, and other bandwidth-intensive activities without buffering or lag.
advertisement
◉
Touch to zoom
封面正面 封面背面 120mm 180mm WR-AX1800 DUAL-BAND GIGABIT Wi-Fi 6 ROUTER DUAL-BAND GIGABIT Wi-Fi 6 ROUTER ROUTEUR Wi-Fi 6 GIGABIT DUAL-BAND Quick Start Guide Reset WPS WAN 1 2 Click Start. TIPS: This function is only applicable when the connection type of the original router is PPPoE, except for PPPoE of some special ISPs or PPPoE connection set up manually with VLAN information. Ensure that the controller is properly grounded. S/N SSID Step 2: Connect the WAN port of the router. Login password of 5-32 characters FS_wifi_XXXXXX FS_wifi_XXXXXX FS_wifi_XXXXXX_5G Ports LED Indicators Description LAN 1, 2 LAN 3/IPTV Power source TIPS: The Wi-Fi password is used to connect to the Wi-Fi network, while the login password is used for logging in to the web UI of the router. Ethernet cable. The LED indicator blinks fast for 3 seconds. Step 2: The router detects your connection type automatically. Select the ISP Type based on your WAN 1 2 POWER IPTV/3 Reset WPS WAN 1 2 IPTV/3 Done. LED Indicator Status Accessories The system is starting up, or the router is already connected to the internet. Blink slow The router fails to connect to the internet. Blink fast for 3 seconds A device is connect to or disconnected from an Ethernet port of the router. Blink fast for 2 minutes The router is pending for or performing WPS negotiation. Reset WPS Off The system is faulty, or the router is not powered on properly. LED Indicator WAN 1 2 POWER IPTV/3 WPS POWER 1 2 IPTV/3 Please select your connection type. Or Reset WPS WAN 1 2 POWER IPTV/3 Power source Reset WPS WAN 1 2 Your’re all set! You can now connect to FS_wifi_XXXXXX POWER IPTV/3 Isp User Name: Enter the user name from your ISP New router Reset WPS WAN 1 2 IPTV/3 POWER Isp Password: Enter the password from your ISP To change settings of other feactures, click the “More” button below. Wired device Next WAN Reset WPS WAN Ethernet cable 1 2 More Skip Ethernet cable Original router Ethernet Cable x 1 https://www.fs.com/contact_us.html Ihrem Netzwerk einsetzen. Product Warranty FS ensures our customers that any damage or faulty items due to our workmanship, we will offer a Method B: Log in to the web UI of the router and navigate to System Settings > Backup / Restore. free return within 30 Days from the day you receive your goods. This excludes any custom made Warranty: The Wi-Fi router enjoys 2 years limited warranty against defect in materials or 2 • The Wi-Fi networks are enabled. • If you are using a wired device, such as a computer: workmanship. For more details about warranty, please check at https://www.fs.com/policies/warranty.html • The Hide function is disabled. Return: If you want to return item(s), information on how to return can be found at Q6: I cannot find the 5 GHz Wi-Fi network of the router on my Wi-Fi-enabled device. What should I https://www.fs.com/policies/day_return_policy.html do? A6: Try the following solutions: WR-AX1800 • Check whether your Wi-Fi-enabled device supports 5 GHz Wi-Fi network. Only devices supporting 5 GHz network can find and connect to the 5 GHz Wi-Fi network. Zubehör • Check whether the Unify 2.4 GHz & 5GHz function is disabled. If it is disabled, refer to Q5 to find a Q2: I cannot access the internet after the configuration. What should I do? solution. A2: Try the following solutions first: WR-AX1800 • Check whether the WAN port of the router is connected to a modem or Ethernet jack properly. • Log in to the web UI of the router and navigate to the Internet Settings page. Follow the instructions on the page to solve the problem. If the problem persists, try the following solutions: − Check whether your Wi-Fi-enabled devices are connected to the Wi-Fi network of the router. 2. Connect the router’s WAN port to the LAN port of your modem or the Ethernet jack using an Ethernet cable. The LED indicator blinks fast for 3 seconds. Ethernet cable Contact Us soll Sie mit dem Aufbau des Wi-Fi-Routers vertraut machen und beschreibt, wie Sie den Wi-Fi-Router in • For Wi-Fi-enabled devices: 1. Ensure that the router is powered on. POWER IPTV/3 − Ensure that the cellular network (mobile data) of the device is disabled. the problem persists, reset the router, and try it again. Connection Type: PPPoE https://www.fs.com/service/help_center.html Vielen Dank, dass Sie sich für den Dual-Band Gigabit Wi-Fi 6 Router entschieden haben. Diese Anleitung object for about 8 seconds and release it when the LED indicator blinks fast. The router is reset. Settings > Wi-Fi Name & Password and ensure that: − Ensure that the computer is set to obtain an IP address and the DNS server address automatically. If Isp Type: Normal Help Center A5: Connect your computer to a LAN port of the router to log in to the web UI. Navigate to Wi-Fi cable. POWER Ethernet cable Solid on WR-AX1800 RESET Description WAN https://www.fs.com/download.html items or tailored solutions. − Ensure that the computer is connected to a LAN port of the router properly using an Ethernet As detected, your connection type may be: PPPoE Reset WPS Download Q5: I cannot find the Wi-Fi network of the router on my Wi-Fi-enabled device. What should I do? bar of the web browser. POWER Power source Back Panel Jack and Buttons do? − Ensure that fswifi.com or 192.168.0.1 is entered correctly in the address bar, rather than the search region and ISP and enter the required parameters (if any). Click Next. Reset WPS Method A: When the router is working normally, hold down the Reset button with a needle-like − Ensure that it connects to the Wi-Fi network of the router. Option B: Connect your wired device, such as a computer, to a LAN port of the router using an WAN WR-AX1800 Power Adapter x 1 Internet 3. Navigate to the Wi-Fi Settings > Wi-Fi Name & Password page to change and save the settings. A4: Try the following methods: FAQ • If you are using a Wi-Fi-enabled device, such as a smartphone: TIPS: If the above page does not appear, refer to Q1 in FAQ. Einführung Q4: How to reset the router? A1: Try the following solutions: Step 1: Import your PPPoE user name and password into the new router (Optional). 10/100/1000Mbps auto-negotiation Ethernet port. It is a LAN port by default. When the IPTV function is enabled, it can only serve as an IPTV port to connect to a set top box. 4. The computer’s IP address setting is correct. Q1: I cannot log in to the web UI of the router by visiting fswifi.com or 192.168.0.1. What should I Next Connect the router 10/100/1000Mbps auto-negotiation LAN port. Used to connect to computers, switches or game machines, etc. Not Required Start Mounting the Wi-Fi Router 10/100/1000Mbps auto-negotiation WAN port. Used to connect to a modern or the Ethernet jack using an Ethernet cable for internet access. WAN 2. Start a web browser and visit fswifi.com or 192.168.0.1 to log in to the web UI of the router. 3. The system status indicator on the device panel and the NIC indicator on the computer must be lit. Not Required Support and Other Resources a LAN port using an Ethernet cable. Set the Wifi password as the login password of the admin account. Quick Setup Wizard Wi-Fi CHOOSE A NETWORK... LAN port 1, 2 Normal Welcome 1. Connect your Wi-Fi-enabled device to the Wi-Fi network of the router, or connect your computer to 2. Check if the hardware connection is correct. WiFi password of 8-32 characters Wi-Fi Setting Keep the Wi-Fi router clean and dust-free. Place the Wi-Fi router in a ventilated place. 9:07 MAC The Screen Displays Request Timed Out A3: Follow the steps below: 1. Check if the network cable is intact. WiFi Settings Wi-Fi-enabled device Q3: How to change the Wi-Fi names and passwords? DE the router. You can find the default Wi-Fi network information on the bottom label of the router. 3. Remove the original router. Place the Wi-Fi router in a dry area and avoid liquid intrusion. Power jack. Please use the included power adapter to connect this jack to a power supply. POWER Step 1: Start a web browser on the device connected to the router, and visit fswifi.com or 192.168.0.1. Troubleshooting EN Make sure the installation site is dry and flat. Used to start the WPS negotiation of the router. Method: Press the button, and the LED indicator blinks fast. Within 2 minutes, enable the WPS function of the other WPS-supported device to establish a WPS connection. WPS POWER IPTV/3 password are imported to your new router. Option A: Connect your Wi-Fi-enabled device, such as a smartphone, to the wireless network of Step 3: Set the Wi-Fi name, Wi-Fi password, and Login password for the router. Click Next. EN LAN 3/IPTV cable. After the LED indicator of the new router blinks fast for 8 seconds, the PPPoE user name and Set up the router EN EN WAN Before you begin the installation, make sure that you have the following: 2. Connect the WAN port of the original router to a LAN port of the new router using an Ethernet Connect your device to the router EN Reset with the the layout of the Wi-Fi Router and describes how to deploy the Wi-Fi Router in your network. EN Used to restore the factory settings of the router. Method: When the router is working normally, hold the button down with a needle-like object for about 8 seconds, and then release it when the LED indicator blinks fast. The router is reset. 1. Power on your original and new routers. EN Back Panel Ports Thank you for choosing the dual-band gigabit Wi-Fi 6 Router. This guide is designed to familiarize you Installation Requirements Button/Jack Description EN Hardware Overview EN Introduction EN Copyright © 2021 FS.COM All Rights Reserved. EN Q.C. PASSED 5653 V1.0 Quick-Start Anleitung Guide de Démarrage Rapide To access the Internet with: − Visit fswifi.com or 192.168.0.1 to log in to the web UI and change your Wi-Fi name and Wi-Fi 1. Wi-Fi-enabled devices: Connect to the Wi-Fi network using the Wi-Fi name and password you set. password on the Wi-Fi Settings > Wi-Fi Name & Password page. Then try again. 2. Wired devices: Connect to a LAN port of the router using an Ethernet cable. • For wired devices: TIPS: If you need to modify the Wi-Fi name and Wi-Fi password, see Q3 in FAQ. If you still cannot access the internet after the configuration, refer to Q2 in FAQ. Netzadapter x 1 Ethernet-Kabel x 1 − Check whether your wired devices are connected to a LAN port properly. − Check whether wired devices are set to obtain an IP address automatically and obtain DNS server address automatically. 2 IPTV/3 POWER Stromanschluss. Verwenden Sie den mitgelieferten Netzadapter, um diese Buchse mit dem Stromnetz zu verbinden. POWER LAN port 1, 2 Ports WAN LAN 1, 2 LAN 3/IPTV Schritt 1: Starten Sie einen Webbrowser auf dem Gerät, das mit dem Router verbunden ist, und Routers. Sie finden die Standard-Wi-Fi-Netzwerkinformationen auf dem unteren Etikett des Routers. besuchen Sie fswifi.com oder 192.168.0.1. Klicken Sie auf Start. WiFi Settings 3. Entfernen Sie den alten Router. TIPPS: Diese Funktion ist nur anwendbar, wenn der Verbindungstyp des alten Routers PPPoE ist, mit Ausnahme von PPPoE einiger spezieller ISPs oder PPPoE-Verbindungen, die manuell mit VLAN-Informationen eingerichtet wurden. Stellen Sie sicher, dass der Controller ordnungsgemäß geerdet ist. Halten Sie den Wi-Fi-Router sauber und staubfrei. Setting S/N SSID Schritt 2: Schließen Sie den WAN Port des Routers an. 9:07 MAC Wi-Fi WiFi password of 8-32 characters Welcome Login password of 5-32 characters FS_wifi_XXXXXX FS_wifi_XXXXXX FS_wifi_XXXXXX_5G Stellen Sie den Wi-Fi-Router an einem gut belüfteten Ort auf. Not Required Set the Wifi password as the login password of the admin account. Quick Setup Wizard Wi-Fi Beschreibung Anschließen des Routers 10/100/1000Mbps LAN Port mit Auto-Negotiation. Dient zum Anschluss von Computern, Switches oder Spielautomaten usw. (optional). TIPPS: Wenn die obige Seite nicht angezeigt wird, lesen Sie bitte unter F1 in den FAQ nach. Internet Stromquelle 1 2 an einen LAN Port des Routers an. Die LED-Anzeige blinkt 3 Sekunden lang schnell. WAN Schritt 2: Der Router erkennt Ihren Verbindungstyp automatisch. Wählen Sie den ISP-Typ auf der WAN 1 2 IPTV/3 - Stellen Sie sicher, dass fswifi.com oder 192.168.0.1 korrekt in die Adressleiste und nicht in die Erledigt. Suchleiste des Webbrowsers eingegeben wurde. - Stellen Sie sicher, dass der Computer über ein Ethernet-Kabel ordnungsgemäß mit einem LAN Port des Routers verbunden ist. - Stellen Sie sicher, dass der Computer so eingestellt ist, dass er eine IP-Adresse und die As detected, your connection type may be: PPPoE LED-Anzeige Status Das System wird hochgefahren, oder der Router ist bereits mit dem Internet verbunden. Dauerhaft ein LED Indicator Reset WPS WAN 1 2 IPTV/3 WPS POWER POWER Blinkt schnell für 3 Sekunden Ein Gerät ist mit einem Ethernet-Port des Routers verbunden oder von diesem getrennt. Blinkt schnell für 2 Minuten Der Router wartet auf die WPS-Aushandlung oder führt sie durch. Aus Das System arbeitet nicht richtig, oder der Router ist nicht richtig eingeschaltet. WAN 1 2 IPTV/3 POWER Oder Ethernet-Kabel Reset WPS WAN 1 2 POWER IPTV/3 DNS-Serveradresse automatisch bezieht. Wenn das Problem weiterhin besteht, setzen Sie den Router Isp Type: Normal Reset WPS WAN 1 2 IPTV/3 FS_wifi_XXXXXX F2: Ich kann nach der Konfiguration nicht auf das Internet zugreifen. Was muss ich tun? POWER Reset WPS WAN 1 2 IPTV/3 Isp User Name: Enter the user name from your ISP POWER Neuer Router Isp Password: To change settings of other feactures, click the “More” button below. WAN Ethernet-Kabel 1 2 Alter Router Ethernet-Kabel verbunden ist. • Melden Sie sich bei der Web-UI des Routers an und navigieren Sie zur Seite Interneteinstellungen. Befolgen Sie die Anweisungen auf der Seite, um das Problem zu lösen. So greifen Sie auf das Internet zu: Kabelgebundenes Gerät POWER IPTV/3 • Überprüfen Sie, ob der WAN-Port des Routers richtig mit einem Modem oder einer Ethernet-Buchse More Skip Ethernet-Kabel 1. Vergewissern Sie sich, dass der Router eingeschaltet ist. WAN A2: Versuchen Sie zunächst die folgenden Lösungen: Enter the password from your ISP Next Reset WPS zurück und versuchen Sie es erneut. Your’re all set! You can now connect to Connection Type: PPPoE Stromquelle Der Router kann keine Verbindung zum Internet herstellen. Blinkt langsam RESET Reset WPS Beschreibung 1. Wi-Fi-fähigen Geräten: Verbinden Sie sich mit dem Wi-Fi-Netzwerk unter Verwendung des von Wenn das Problem weiterhin besteht, versuchen Sie die folgenden Lösungen: 2. Verbinden Sie den WAN-Port des Routers über ein Ethernet-Kabel mit dem LAN-Port Ihres Modems Ihnen festgelegten Wi-Fi-Namens und -Passworts. oder mit der Ethernet-Buchse. Die LED-Anzeige blinkt 3 Sekunden lang schnell. • Für Wi-Fi-fähige Geräte: 2. Kabelgebundene Geräte: Schließen Sie sie mit einem Ethernet-Kabel an einen LAN Port des Routers - Überprüfen Sie, ob Ihre Wi-Fi-fähigen Geräte mit dem Wi-Fi-Netzwerk des Routers verbunden sind. an. - Besuchen Sie fswifi.com oder 192.168.0.1, um sich bei der Web-UI anzumelden, und ändern Sie TIPPS: Wenn Sie den Wi-Fi-Namen und das Wi-Fi-Passwort ändern müssen, siehe F3 in den FAQ. Wenn Sie nach der Konfiguration immer noch nicht auf das Internet zugreifen können, lesen Sie unter F2 in den FAQ nach. POWER Étape1: Démarrez un navigateur Web sur l'appareil connecté au routeur, et visitez fswifi.com ou routeur. Vous trouverez les informations relatives du réseau Wi-Fi par défaut sur l'étiquette inférieure 192.168.0.1. Cliquez sur Démarrer. Setting S/N SSID Étape 2: Connectez le port WAN du routeur. Normal 9:07 MAC WiFi password of 8-32 characters Wi-Fi Welcome Quick Setup Wizard Wi-Fi Login password of 5-32 characters CONSEILS: Si la page n'apparaît pas, reportez-vous à la question 1 de la FAQ. Internet Source d'énergie Allumé POWER Reset WPS Clignote lentement Indicateur LED Reset WPS Description à l'aide d'un câble Ethernet. L'indicateur lumineux clignotera rapidement pendant 3 secondes. WAN 1 2 IPTV/3 Source d'énergie Le routeur ne parvient pas à se connecter à Internet. Clignote rapidement pendant 3 secondes Un périphérique est connecté ou déconnecté d'un port Ethernet du routeur. Clignote rapidement pendant 2 secondes Le routeur est en attente ou effectue une négociation WPS. Éteint Le système est défectueux, ou le routeur n'est pas correctement mis sous tension. WAN 1 2 IPTV/3 Reset WPS WAN 1 2 IPTV/3 CONSEILS: Le mot de passe Wi-Fi est utilisé pour la connexion au réseau Wi-Fi, tandis que le mot de passe de connexion est utilisé pour se connecter à l'interface utilisateur Web du routeur. Étape 2: Le routeur détecte automatiquement votre type de connexion. Sélectionnez le Type de FAI Terminé. sur Next (Suivant). POWER Ou Reset WPS WAN 1 2 IPTV/3 Reset WPS Câble Ethernet IPTV/3 POWER Routeur d'origine câble Ethernet Your’re all set! You can now connect to WAN 1 2 IPTV/3 FS_wifi_XXXXXX Isp User Name: Enter the user name from your ISP POWER Isp Password: To change settings of other feactures, click the “More” button below. Enter the password from your ISP QUESTIONS FRÉQUENTES Q4 : Comment réinitialiser le routeur ? R4: Essayez les méthodes suivantes: Méthode A : Lorsque le routeur fonctionne normalement, appuyez sur le bouton Reset avec un objet 192.168.0.1. Que dois-je faire ? Câble Ethernet More Skip Pour accéder à l'Internet avec : 2. Connectez le port WAN du routeur au port LAN de votre modem ou à la prise Ethernet à l'aide 1. Appareils compatibles Wi-Fi : Connectez-vous au réseau Wi-Fi à l'aide de l'identifiant et du mot de d'un câble Ethernet. L'indicateur lumineux clignotera rapidement pendant 3 secondes. passe Wi-Fi que vous avez définis. 28 29 30 Kontakt https://www.fs.com/de/contact_us.html puissiez vous familiariser avec la configuration du Routeur Wi-Fi et décrit comment procéder à son déploiement. WAN Produktgarantie ändern und zu speichern. Reset WPS Ports F4: Wie kann ich den Router zurücksetzen? Verarbeitungsfehler. Weitere Details zur Garantie finden Sie unter: WAN https://www.fs.com/de/policies/warranty.html A4: Versuchen Sie die folgenden Methoden: Methode A: Wenn der Router normal funktioniert, halten Sie die Reset-Taste mit einem nadelartigen Rückgabe: Wenn Sie Artikel zurücksenden möchten, finden Sie Informationen unter: Gegenstand etwa 8 Sekunden lang gedrückt und lassen Sie sie los, wenn die LED-Anzeige schnell https://www.fs.com/de/policies/day_return_policy.html LAN 1, 2 blinkt. Der Router ist zurückgesetzt. LAN 3/IPTV Methode B: Melden Sie sich bei der Web-UI des Routers an und navigieren Sie zu Systemeinstellungen > Sichern / Wiederherstellen. F5: Ich kann das Wi-Fi-Netzwerk des Routers auf meinem Wi-Fi-fähigen Gerät nicht finden. Was A5: Schließen Sie Ihren Computer an einen LAN Port des Routers an, um sich bei der Web-UI dass: Si le problème persiste, essayez les solutions suivantes: Description Port WAN 10/100/1000Mbps à auto-négociation. Utilisé pour la connexion à une prise moderne ou prise Ethernet à l'aide d'un câble Ethernet pour accès Internet. Port LAN 10/100/1000Mbps à auto-négociation. Utilisé pour la connexion aux ordinateurs, switchs ou consoles de jeux, etc. Port Ethernet 10/100/1000Mbps à auto-négociation. Il s'agit d'un port LAN par défaut. Lorsque la fonction IPTV est activée, il peut uniquement servir de port IPTV pour la connexion à un boîtier décodeur. Reset WPS WAN 1 2 IPTV/3 POWER F6: Ich kann das 5-GHz-Wi-Fi-Netzwerk des Routers auf meinem Wi-Fi-fähigen Gerät nicht finden. WPS Was muss ich tun? A6: Versuchen Sie die folgenden Lösungen: • Überprüfen Sie, ob Ihr Wi-Fi-fähiges Gerät das 5-GHz-Wi-Fi-Netzwerk unterstützt. Nur Geräte, die das Adaptateur d'Alimentation x 1 Câble Ethernet x 1 5-GHz-Netz unterstützen, können das 5-GHz-Wi-Fi-Netz finden und sich mit ihm verbinden. • Prüfen Sie, ob die Funktion Unify 2,4 GHz & 5GHz deaktiviert ist. Wenn sie deaktiviert ist, lesen Sie bitte unter F5 nach, um eine Lösung zu finden. 21 22 Support et Autres Informations Télécharger https://www.fs.com/fr/download.html Centre d'Assistance https://www.fs.com/fr/service/help_center.html Contactez-Nous https://www.fs.com/fr/contact_us.html 23 Compliance Information CE FCC FS.COM GmbH hereby declares that this device is in compliance with the Directive 2014/53/EU. A copy of the EU Declaration of Conformity is available at Garantie des Produits FS garantit à ses clients que tout dommage ou article défectueux dû à sa fabrication peut être Note: This equipment has been tested and found to comply with the limits for a Class B digital device, www.fs.com/company/quality_control.html pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection Die FS.COM GmbH erklärt hiermit, dass dieses Gerät mit der Richtlinie 2014/53/EU übereinstimmt. Eine against harmful interference in a residential installation. This equipment generates, uses and can Kopie der EU-Konformitätserklärung finden Sie unter radiate radio frequency energy and, if not installed and used in accordance with the instructions, may www.fs.com/de/company/quality_control.html cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful retourné dans un délai de 30 jours à compter de la date de réception de la marchandise. Cela exclut interference to radio or television reception, which can be determined by turning the equipment off tout article fabriqué sur mesure ou toute solution personnalisée. and on, the user is encouraged to try to correct the interference by one or more of the following FS.COM GmbH déclare par la présente que cet appareil est conforme à la Directive 2014/53/UE. Une copie de la Déclaration de Conformité de l'UE est disponible à l'adresse suivante https://www.fs.com/fr/company/quality_control.html measures: 2 Garantie : Le routeur Wi-Fi bénéficie d'une garantie limitée de 2 ans contre les défauts —Reorient or relocate the receiving antenna. matériel ou de fabrication. Pour plus de détails sur la garantie, veuillez consulter la page —Increase the separation between the equipment and receiver. suivante : —Connect the equipment into an outlet on a circuit different from that to which the receiver is Que dois-je faire ? Retour: Si vous souhaitez retourner un ou plusieurs articles, vous trouverez des R5: Connectez votre ordinateur à un port LAN du routeur pour accéder à l'interface Web. Naviguez informations sur les modalités de retour à l'adresse suivante jusqu'à Wi-Fi Settings > Wi-Fi Name & Password et assurez-vous que: https://www.fs.com/fr/policies/day_return_policy.html connected. FS.COM LIMITED 24F, Infore Center, No.19, Haitian 2nd Rd, Binhai Community, Yuehai Street,Nanshan District, Shenzhen City FS.COM GmbH NOVA Gewerbepark Building 7, Am Gfild 7, 85375 Neufahrn bei Munich, Germany —Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. • The Wi-Fi networks are enabled. The antennas used for this transmitter must be installed to provide a separation distance of at least • The Hide function is disabled. or transmitter. CAUTION: R6: Essayez les solutions suivantes: Any changes or modifications not expressly approved by the grantee of this device could void the • Vérifiez si votre appareil Wi-Fi prend en charge la connectivité Wi-Fi 5 GHz. Seuls les appareils user's authority to operate the equipment. • Vérifiez si la fonction Unify 2,4 GHz & 5GHz est désactivée. Si elle est désactivée, reportez-vous à la Responsible party (only for FCC matter) question 5 pour trouver une solution. FS.COM Inc. 380 Centerpoint Blvd, New Castle, DE 19720, United States https://www.fs.com - Visitez fswifi.com ou 192.168.0.1 pour accéder à l'interface Web et modifier votre identifiant et votre mot de passe Wi-Fi sur la page Wi-Fi Settings > Wi-Fi Name & Password. Puis réessayez. • Pour les dispositifs filaires : - Vérifiez si vos périphériques câblés sont correctement connectés à un port LAN. - Vérifiez si les périphériques câblés sont configurés pour obtenir automatiquement une adresse IP et une adresse de serveur DNS. 32 POWER • Die Funktion Ausblenden ist deaktiviert. - Vérifiez si vos appareils compatibles Wi-Fi sont connectés au réseau Wi-Fi du routeur. 31 IPTV/3 RESET • Die Wi-Fi-Netzwerke sind aktiviert. prenant en charge la fréquence 5 GHz peuvent détecter et se connecter au réseau Wi-Fi 5 GHz. les instructions de la page pour résoudre le problème. 2 WR-AX1800 anzumelden. Navigieren Sie zu Wi-Fi-Einstellungen > Wi-Fi Name & Passwort und stellen Sie sicher, faire ? • Vérifiez si le port WAN du routeur est correctement connecté à un modem ou à une prise Ethernet. 1 Prise et Boutons du Panneau Arrière Accessoires muss ich tun? Q6 : Je ne trouve pas le réseau Wi-Fi 5 GHz du routeur sur mon périphérique Wi-Fi. Que dois-je R2: Essayez les solutions suivantes: WAN WR-AX1800 20cm from all persons and must not be located or operating in conjunction with any other antenna Q2 : Je ne peux pas accéder à l'Internet après la configuration. Que dois-je faire ? LAN 3/IPTV LAN port 1, 2 Garantie: Der Wi-Fi-Router genießt 2 Jahre beschränkte Garantie gegen Material- und 2 Q5 : Je ne parviens pas à détecter le réseau Wi-Fi du routeur sur mon appareil compatible Wi-Fi. - Assurez-vous que fswifi.com ou 192.168.0.1 est correctement saisi dans la barre d'adresse, plutôt https://www.fs.com/de/service/fs_support.html Ports du Panneau Arrière 3. Navigieren Sie zur Seite Wi-Fi-Einstellungen > Wi-Fi Name & Passwort, um die Einstellungen zu https://www.fs.com/fr/policies/warranty.html • Si vous utilisez un périphérique filaire, tel qu'un ordinateur: • Pour les appareils équipés de la technologie Wi-Fi: 1. Assurez-vous que le routeur est sous tension. 27 Restore. - Assurez-vous que le réseau cellulaire (données mobiles) de l'appareil est désactivé. Hilfecenter Merci d'avoir choisi le Routeur Wi-Fi 6 gigabit à double bande. Ce guide est conçu pour que vous Ware gewähren. Dies gilt nicht für Sonderanfertigungen oder maßgeschneiderte Lösungen. Web-UI des Routers anzumelden. routeur est réinitialisé. Méthode B : Connectez-vous à l'interface Web du routeur et accédez à System Settings > Backup / https://www.fs.com/de/download.html Aperçu du Matériel Verarbeitung zurückzuführen sind, eine kostenlose Rückgabe innerhalb von 30 Tagen nach Erhalt der 2. Starten Sie einen Webbrowser und besuchen Sie fswifi.com oder 192.168.0.1, um sich bei der fin pendant environ 8 secondes et relâchez-le lorsque l'indicateur lumineux clignote rapidement. Le • Connectez-vous à l'interface Web du routeur et accédez à la page des Paramètres Internet. Suivez CONSEILS: Si vous devez modifier l'identifiant et le mot de passe Wi-Fi, consultez la section Q3 de la FAQ. Si vous ne pouvez toujours pas accéder à Internet après la configuration, reportez-vous à la section Q2 de la FAQ. 26 paramètres. serveur DNS. Si le problème persiste, réinitialisez le routeur et réessayez. 2. Dispositifs filaires : Connectez-vous à un port LAN du routeur à l'aide d'un câble Ethernet. 25 3. Accédez à la page Wi-Fi Settings > Wi-Fi Name & Password pour modifier et enregistrer les 4. Le paramètre de l'adresse IP de l'ordinateur est correct. - Vérifiez que l'ordinateur est configuré pour obtenir automatiquement une adresse IP et l'adresse du Connection Type: PPPoE POWER WAN 2 doivent être allumés. câble Ethernet. Next 1 routeur. Downloads 12 Introduction Wir garantieren unseren Kunden, dass wir bei Schäden oder fehlerhaften Artikeln, die auf unsere Computer mit einem Ethernet-Kabel an einen LAN-Port an. Isp Type: Normal POWER Appareil filaire WAN 3. L'indicateur d'état du système sur le panneau de commande et l'indicateur NIC sur l'ordinateur - Assurez-vous que l'ordinateur est correctement connecté à un port LAN du routeur à l'aide d'un As detected, your connection type may be: PPPoE POWER Nouveau routeur Reset WPS 2. Lancez un navigateur Web et visitez fswifi.com ou 192.168.0.1 pour accéder à l'interface Web du que dans la barre de recherche du navigateur Web. Please select your connection type. Câble Ethernet Le système est en train de démarrer, ou le routeur est déjà connecté à Internet. 2. Vérifiez si la connexion matérielle est correctement établie. - Assurez-vous que celui-ci se connecte au réseau Wi-Fi du routeur. Option B: Connectez votre périphérique filaire, tel qu'un ordinateur, à un port LAN du routeur Source d'énergie Indicateurs LED Statut ordinateur à un port LAN à l'aide d'un câble Ethernet. Q1 : Je ne peux pas me connecter à l'interface Web du routeur en visitant fswifi.com ou en fonction de votre région et de votre FAI et entrez les paramètres requis (le cas échéant). Cliquez IPTV/3 1. Connectez votre appareil compatible Wi-Fi au réseau Wi-Fi du routeur, ou connectez votre 1. Vérifiez si le câble réseau est en bon état. • Si vous utilisez un appareil compatible Wi-Fi, tel qu'un smartphone: WAN 2 R3: Suivez les étapes ci-dessous : R1: Essayez les solutions suivantes: Étape 1: Importez votre nom d'utilisateur et votre mot de passe PPPoE au nouveau routeur (Optionnel). 1 Not Required Next Connexion du routeur WAN Not Required Start Installation d'un routeur Wi-Fi Reset WPS Q3 : Comment changer l'identifiant et mot de passe Wi-Fi ? Set the Wifi password as the login password of the admin account. FS_wifi_XXXXXX FS_wifi_XXXXXX FS_wifi_XXXXXX_5G Dépannage L'Écran Affiche “Request Timed Out” WiFi Settings CHOOSE A NETWORK... Indicateurs LED routeur. Cliquez sur Next (Suivant). 1. Verbinden Sie Ihr Wi-Fi-fähiges Gerät mit dem Wi-Fi-Netzwerk des Routers, oder schließen Sie Ihren 20 FR Option A: Connectez votre appareil compatible Wi-Fi, tel qu'un smartphone, au réseau sans fil du Passwort. Versuchen Sie es dann erneut. 19 Étape 3: Définissez le nom Wi-Fi, le mot de passe Wi-Fi et le mot de passe de connexion pour le Appareils Wi-Fi Assurez-vous que le routeur Wi-Fi est propre et exempt de poussière. Placez le routeur Wi-Fi dans un endroit ventilé. Configuration du Routeur du routeur. CONSEILS: Cette fonction n'est applicable que lorsque le type de connexion du routeur d'origine est PPPoE, à l'exception de PPPoE de certains FAI spéciaux ou d'une connexion PPPoE configurée manuellement avec des informations VLAN. Assurez-vous que le contrôleur est correctement mis à terre. FR secondes, le nom d'utilisateur et le mot de passe PPPoE sont importés au nouveau routeur. 3. Retirez le routeur traditionnel. Placez le routeur Wi-Fi dans un endroit sec et évitez toute infiltration de liquide. Prise d'alimentation. Veuillez utiliser l'adaptateur électrique inclus pour connecter cette prise à une alimentation électrique. d'un câble Ethernet. Après que l'indicateur LED du nouveau routeur clignote rapidement pendant 8 FR Utilisé pour démarrer la négociation WPS du routeur. Méthode: Appuyez sur le bouton, et l'indicateur LED clignotera rapidement. Dans les 2 minutes, activez la fonction WPS de l'autre appareil compatible WPS pour établir une connexion WPS. 2. Connectez le port WAN de votre routeur traditionnel à un port LAN du nouveau routeur à l'aide 18 FR Assurez-vous que le site d'installation est exempt d'humidité et horizontal. 17 Connexion de votre appareil au routeur 1. Mettez sous tension votre routeur traditionnel et votre nouveau routeur. Avant de commencer l'installation, assurez-vous que vous disposez des éléments suivants : FR WPS Permet de restaurer les paramètres d'usine du routeur. Méthode: Lorsque le routeur fonctionne normalement, appuyez sur le bouton avec un objet fin pendant environ 8 secondes, puis relâchez-le lorsque l'indicateur LED clignote rapidement. Le routeur est réinitialisé. 16 FR Exigences d'Installation Bouton/Prise Description Reset 15 Ihren Wi-Fi-Namen und Ihr Wi-Fi-Passwort auf der Seite Wi-Fi-Einstellungen > Wi-Fi-Name & FR 14 FR 13 A3: Führen Sie die folgenden Schritte aus: • Wenn Sie ein kabelgebundenes Gerät, z. B. einen Computer, verwenden: Please select your connection type. Stromquelle Buchse und Tasten an der Rückseite 4. Die Einstellung der IP-Adresse des Computers ist korrekt. - Stellen Sie sicher, dass das Mobilfunknetz (mobile Daten) des Geräts deaktiviert ist. vorhanden). Klicken Sie auf Next. POWER POWER IPTV/3 F3: Wie ändere ich die Wi-Fi-Namen und -Kennwörter? - Stellen Sie sicher, dass es mit dem Wi-Fi-Netzwerk des Routers verbunden ist. TIPPS: Das Wi-Fi-Passwort wird für die Verbindung mit dem Wi-Fi-Netzwerk verwendet, während das Anmeldepasswort für die Anmeldung bei der Web-UI des Routers verwendet wird. Option B: Schließen Sie Ihr kabelgebundenes Gerät, z. B. einen Computer, mit einem Ethernet-Kabel Reset WPS WAN leuchten. • Wenn Sie ein Wi-Fi-fähiges Gerät, wie z. B. ein Smartphone, verwenden: Grundlage Ihrer Region und Ihres ISP aus und geben Sie die erforderlichen Parameter ein (falls Reset WPS eine DNS-Serveradresse beziehen. A1: Versuchen Sie die folgenden Lösungen: Schritt 1: Importieren Sie Ihren PPPoE-Benutzernamen und Ihr Passwort in den neuen Router 10/100/1000Mbps Ethernet Port mit Auto-Negotiation. Standardmäßig ist dies ein LAN Port. Wenn die IPTV-Funktion aktiviert ist, kann er nur als IPTV-Port für die Verbindung mit einer Set-Top-Box verwendet werden. 2. Prüfen Sie, ob die Hardwareverbindung korrekt ist. 192.168.0.1 besuche. Was muss ich tun? Montage des Wi-Fi-Routers 10/100/1000Mbps WAN Port mit Auto-Negotiation. Dient zum Anschluss an ein modernes Gerät oder an die Ethernet-Buchse mit einem Ethernet-Kabel für den Internetzugang. 1. Prüfen Sie, ob das Netzwerkkabel intakt ist. - Prüfen Sie, ob kabelgebundene Geräte so eingestellt sind, dass sie automatisch eine IP-Adresse und F1: Ich kann mich nicht bei der Web-UI des Routers anmelden, indem ich fswifi.com oder Next LED-Anzeigen sen sind. FAQ Not Required Start CHOOSE A NETWORK... Auf dem Bildschirm erscheint “Request Timed Out” Support und andere Ressourcen - Überprüfen Sie, ob Ihre kabelgebundenen Geräte ordnungsgemäß an einen LAN Port angeschlos- 3. Die Systemstatusanzeige auf dem Gerätepanel und die NIC-Anzeige auf dem Computer müssen Normal DE Stellen Sie den Wi-Fi-Router an einem trockenen Ort auf und vermeiden Sie das Eindringen von Flüssigkeiten. Wi-Fi-Gerät • Für kabelgebundene Geräte: 11 FR Option A: Verbinden Sie Ihr Wi-Fi-fähiges Gerät, z. B. ein Smartphone, mit dem Drahtlosnetzwerk des Router fest. Klicken Sie auf Next. Fehlerbehebung 10 FR der PPPoE-Benutzername und das Kennwort in Ihren neuen Router importiert. Stellen Sie sicher, dass der Installationsort trocken und eben ist. Schritt 3: Legen Sie den Wi-Fi-Namen, das Wi-Fi-Passwort und das Anmeldepasswort für den 9 DE neuen Routers. Nachdem die LED-Anzeige des neuen Routers 8 Sekunden lang schnell blinkt, werden Einrichten des Routers 8 DE 2. Verbinden Sie den WAN-Port des alten Routers über ein Ethernet-Kabel mit einem LAN-Port des 7 FR 1 WPS DE DE WAN Wird verwendet, um die WPS-Verhandlung des Routers zu starten. Methode: Drücken Sie die Taste, und die LED-Anzeige blinkt schnell. Aktivieren Sie innerhalb von 2 Minuten die WPS-Funktion des anderen WPS-unterstützten Geräts, um eine WPS-Verbindung herzustellen. LAN 3/IPTV Verbinden Sie Ihr Gerät mit dem Router 1. Schalten Sie den alten und den neuen Router ein. Bevor Sie mit der Installation beginnen, sollten Sie sich vergewissern, dass die folgenden Voraussetzungen erfüllt sind: 6 DE WAN 5 DE Dient zur Wiederherstellung der Werkseinstellungen des Routers. Methode: Wenn der Router normal funktioniert, halten Sie die Taste mit einem nadelähnlichen Gegenstand etwa 8 Sekunden lang gedrückt und lassen Sie sie dann los, wenn die LED-Anzeige schnell blinkt. Der Router wird zurückgesetzt. Reset Reset WPS Installationsvoraussetzungen Taste/Buchse Beschreibung Ports an der Rückseite 4 DE Hardware-Übersicht 3 DE 2 DE 1 33 34 35 24 POWER
advertisement
Related manuals
advertisement