CALIFONE HPK-1500 Titanium Headphones User Manual

Add to My manuals
2 Pages

advertisement

CALIFONE HPK-1500 Titanium Headphones User Manual | Manualzz

6. TROUBLESHOOTING

No Sound /

Low Volume

Ensure cords are connected securely to the headphone/ headset and the audio source/computer.

Ensure the audio source is not muted and volume is up.

For the headphones/headsets with a recharging jack, ensure the battery is fully charged.

7. SPECIFICATIONS & FEATURES

Standard Kits

Features

Plug Types

Frequency Response

THD %

Headphone Input Impedance

Limiter

Microphone (HPC-1010 & HPC-

1030)

Battery Usage Time (HPE-1020 &

HPE-1030 only)

Battery Recharge Time (HPE-1020 &

HPE-1030 only)

Product Construction

HPK-1000: Includes HPE-1000 & HPC-1000

HPK-1010: Includes HPE-1010 & HPC-1010

HPK-1020: Includes HPE-1020 & HPC-1020

HPK-1030: Includes HPE-1030 & HPC-1030

HPK:1040: Includes HPE-1000 & HPC-1020

HPK-1050: Includes HPE-1010 & HPC-1030

40mm Neodymium transducers

Adjustable Headband

Adjustable uni-directional microphone (HPE-

1010 & HPE-1030)

Excellent Isolation / Ambient Noise

Reduction

In-line volume control

Straight, replaceable cords.

“Dishwasher Safe” (HPE-1000 & HPE-1010 only)

HPC-1000 & HPC-1010: USB plug

HPC-1020: Stereo 3.5mm plug with 6.5mm adapter

HPC-1030: Stereo 3.5mm plug + 3.5mm plug for mic

20 Hz - 20 kHz

< 2 % (80Hz - 20kHz)

50 ohms

Level: 85 +/- 3 dB (No weighting) **

Speed: < 20 ms

** Depends on signal and ear/head-coupling.

Uni-directional electret (requires bias voltage between 2 to 10 V)

> 8 hours (depends on usage)

< 2 hours

Earcups: ABS plastic

Earpads: PVC

Cords: Polyurethane califone.com

Product Dimensions

Product Weight (incl. accessories)

Headphones: 8.25” x 6.3” x 3”

HPC-1000 & HPC-1010: 7.5’ total cord length

HPC-1020 & HPC-1030: 6.25’ total cord length

HPC-series < 3 oz

HPE-series: < 10 oz

8. WARRANTY

Califone warrants this product to be free from defective material and workmanship for one year from the purchase date. Our “Project

Intercept” Customer Satisfaction program will replace defective parts and repair malfunctioning equipment under this warranty when the defect occurs under normal use.

All Damage Claims Must Be Made With the Freight Carrier

Notify the freight carrier immediately if you observe any damage to the shipping carton or product. Repack the unit in the carton and await inspection by the carrier’s claim agent. Notify your dealer of the pending freight claim.

Returning Your Unit for Service or Repairs

Should your unit require service, contact our Customer Service

Department online at califone.com/techsupport or via email [email protected] or by phone at 800-722-0500 / 818-407-2400 to first obtain an RA (Return Authorization) number before returning it to Califone. The unit must be returned to our factory via prepaid transportation only after the factory issues an RA number, which must be clearly written on the outside of the box.

Califone ® International, Inc.

1145 Arroyo Avenue, #A

San Fernando, CA 91340 USA

Toll Free 800.722.0500 | Toll Free Fax 877.402.2248

International Customers call 818.407.2400 or Fax 818.407.2405

califone.com

Califone HPK-series Rev 01 0710

Model HPK-series

Headphones/Headsets

User Manual

Model HPK-series Headphones/

Headsets

Thank you for purchasing the Califone ®

Headsets.

HPK-series Headphones/

We encourage you to visit our website www.califone.com to register your product for its warranty coverage, sign up to receive our newsletter, download our catalog, and learn more about the complete line of

Califone ® audio visual products, including portable and installed wireless

PA systems, multimedia players and recorders, headphones and headsets, computer peripheral equipment, visual presentation products and language learning materials.

1. IMPORTANT SAFETY INSTRUCTIONS

Before using this product, read the instruction manual for important safety information. Please retain this manual for future reference and warranty information.

Troubleshooting & Servicing

Do not attempt to service or repair the device yourself. Refer all servicing to qualified service personnel. Do not attempt to modify the device in any way. Doing so could invalidate your warranty.

Moisture and heat sources

The HPE-1000 and HPE-1010 headphones/headsets are washable. All other headphones/headsets are not. Follow the Maintenance & Cleaning instructions in Section 5 of this manual carefully. At all other times, do not use this apparatus near water (for example, sinks, baths, pools) or expose it to rain, moisture, dripping or splashing liquids. Unless otherwise specified, do not expose the unit to high temperatures, high humidity or direct sunlight.

Location

Place the device in stable location, so it will not fall causing damage to the device or bodily harm.

Intended use

The product may only be used with the original parts intended for it.

The product may only be used in closed and dry rooms. The intended use includes adherence to the specified installation instructions. The manufacturer accepts no liability for damage arising due to improper use.

2. PACKAGE CONTENTS

• HPE-series Headphone

• HPC-series Detachable Cord

• User Manual

• HPC-1020 also includes 3.5mm to 6.5mm adapter

3. PART NAMES AND FUNCTIONS

HPE-1020 & HPE-1030

Headphone - Left Earcup

Rear View

1

2

3

6

3

2

3

5

HPE-1020 & HPE-1030 Headphone

- Right Earcup Bottom View

DANGER:CONNECT

WS-CH SERIES

CHARGER ONLY

6

1. Volume Control

2. Power LED

3. Limiter ON/OFF Switch & LED

4. Mute Button

5. Mic Off Button & LED

6. Recharging Connector for

WS-CH Charger

4. SETUP AND INSTALLATION

1. If not already assembled, carefully plug the HPC-series cord into the bottom of the HPE-series headphone/headset left earcup.

2. Use the WS-CH charger to recharge up to 4 sets of headphones with internal batteries (HPE-1020 and HPE-1030). The WS-CH will indicate when charging is complete. Refer to the WS-series

User Manual for details.

NOTICE: Do not connect any other type of power supply to the headphones. Doing so may result in damage to the headphones.

califone.com

5. BASIC OPERATION

CAUTION: Avoid listening to the headphones at loud volume settings for long periods of time as this can result in hearing damage.

Using the 85dB Limiter function may help reduce the risk of hearing damage, but is in no way a guarantee.

HPC-1000 & HPC-1010 Operation

1. Adjust the headphone volume to minimum.

2. Connect the USB plug to the computer. The computer should automatically detect and install the device. Wait until installation is complete. If using Windows 98, an additional driver may be required to install the device. Visit www.califone.com to download the driver. The Power LED should light green.

3. On the computer, use the Audio Settings Control Panel/

Preferences to select the device to output audio.

4. Begin playing audio on the computer.

5. To help reduce peaks in the audio and reduce the risk of hearing damage due to loud sounds in the headphones, enable the 85dB

Limiter by moving the Limiter switch to the ON position. The

Limiter LED should light green.

6. Increase the volume to the desired level.

7. The HPC-1010 also includes a Mic Off (to mute the microphone) and MUTE button (to mute the audio output to the headphones).

Momentarily press the buttons to enable/disable these functions.

HPE-1020 & HPE-1030 Operation

1. The HPE-1020 and HPE-1030 Headphones include an internal

85 dB Limiter that can be switched on or off.

NOTE: The HPE-1020 and HPE-1030 will operate without a charged battery, however, the limiter will not function.

Maintenance & Cleaning

NOTICE: Only the HPE-1000 and HPE-1010 Headphones are washable. Other headphones/headsets and cords cannot be washed.

Washable Models:

1. Before washing, remove the cord and foam from the microphone.

2. To remove/replace the cord, push a small screwdriver or paper clip into the hole where the cord connects to the earcup and pull down on the cord.

3. Wash by hand with soap and water.

CAUTION: Allow headphones to dry thoroughly before use.

Non-Washable Models:

1. When cleaning the device, please use a soft, dry cloth. (Never use benzene, paint-thinner, or other chemicals on the device.) califone.com

advertisement

Key Features

  • Adjustable headband and earcups for a customized fit
  • 40mm Neodymium transducers for rich, detailed sound
  • Adjustable uni-directional microphone for clear communication
  • In-line volume control for easy adjustments
  • Durable construction for long-lasting use
  • Excellent isolation and ambient noise reduction
  • Straight, replaceable cords
  • "Dishwasher Safe" (HPE-1000 & HPE-1010 only)

Related manuals

Frequently Answers and Questions

What is the frequency response of the HPK-1500?
The frequency response of the HPK-1500 is 20 Hz - 20 kHz.
What is the headphone input impedance of the HPK-1500?
The headphone input impedance of the HPK-1500 is 50 ohms.
What is the battery usage time of the HPK-1500?
The battery usage time of the HPK-1500 is > 8 hours (depends on usage).
What is the battery recharge time of the HPK-1500?
The battery recharge time of the HPK-1500 is < 2 hours.
Download PDF

advertisement