Kogan KATWST3PLHA T3 Pro True Wireless Earbuds User Guide

T3 PRO TRUE WIRELESS EARBUDS

WITH WIRELESS CHARGING CASE

KATWST3PLHA

SAFETY & WARNINGS

User Safety Instructions

• To avoid any possible hearing damage, keep the volume at a moderate level.

• Avoid listening to music at loud volume levels for prolonged periods, as this may cause permanent hearing damage or hearing loss.

• Please be aware of the surroundings and do not use the earphones while driving, cycling, running or jogging or when doing any activity which requires your attention and ability to hear.

Product Safety Warning

• For best results and long battery life, please disconnect the USB cable after charging is complete.

• Please use an AC adaptor with max output voltage and current of 5V/1A. If the output voltage and current of the charger exceed the recommended power, it may cause severe damage to the product and void the product warranty.

• Use original charging cable for charging the storage case.

• Charge the earphones and the battery case at least once every 6 months, for the good life cycle of the product.

• Store in a cool and dry place, Keep away from hot and humid conditions.

• The battery is designed to the last lifecycle of the product. It should only be removed by a recycling facility. And attempt to remove or replace the batteries will damage the product and void the warranty.

COMPONENTS

Small Medium Large

3 different sized eartips

Charging Case

Wireless earphones

Type-C Charging Cable User Guide

OVERVIEW

2

1

3

5

4

1 Touch Area

2 Microphone

3 LED Indicator (Earphone)

4 Earphone Charging LED Indicator

5 Charging Case LED Indicator

6 Multi-Function Button (MFB)

6

FITMENT

Choosing right fit eartips

Try different sized ear tips for a comfortable fit and good sound performance. Choose the ear-tips that seal your ear canal properly for good sound performance. You may need different sized ear tips for left and right.

✓

Correct way to wear

S M L

X

X

X

Incorrect way to wear

X

OPERATION

Power on/off

• To power on the earphones, simply remove the earphones from the charging case, earphones will automatically turn on if they are charged.

• To power off the earphones, put the earphones back in the charging case.

• If the earphones do not power on, they require further charging.

Interpairing the earphones

• Ensure that the earphones are sufficiently charged.

• Remove both earphones from the charging case, earphones will turn on and enter the automatic interpairing mode. Wait a few seconds as both earphones pair with each other. You will hear a prompt tone when the connection is successful.

Earphones are interpaired in 3-8 seconds normally.

• To reactivate interpairing mode, simply put the earphones back in charging case, wait few seconds and then follow the above procedure again.

Using just left or right earphone

• It is possible to use just one earphone at a time. To do this, the interpairing steps above need not apply.

• Remove the selected earphone from the charging case, while leaving the other in the case. Close the case.

• The single earphone will turn on and enter the automatic interpairing mode, but not connect to the other earpiece.

• It will then be ready to use, with only left or right audio (depending on the earpiece).

Bluetooth pairing and connectivity

After the interpairing is successful, the earphones are ready to pair with your Bluetooth enabled device.

• Turn on the Bluetooth function on your device and search for T3 Pro in the

Bluetooth menu. Select T3 Pro and you will hear a prompt tone when pairing is successful.

• Once the connection is successful, you can start using the wireless earphones.

• To disconnect, simply put the earphones back in the charging case and the earphones will automatically disconnect from any paired devices.

• To reconnect the earphones with the same device, simply remove the earphones from charging case and the earphones will automatically connect to your device.

Ensure that the Bluetooth function on your device (computer, smartphone, etc) is turned on.

• To prevent the earphones from automatically connecting to a device, remove the earphones from the Bluetooth menu of that device.

• To enjoy calls, music and audio output from your device to the earphones, ensure that the media connection for both calls and media files is activated in the

Bluetooth menu.

Using Multi-Function Button (MFB)

Play/Pause

Previous Song

Next Song

Left earphone (L)

Touch once

Touch Twice

Right earphone

Touch once

Touch twice

(R)

Volume +

Volume - Touch and hold

Touch and hold

Answer/End a call Touch once

Reject call Touch and hold for 3 seconds

Touch once

Touch and hold for 3 seconds

Voice assistant Touch three times

Charging the earphones

• Place the earphones in the charging case, a blue indicator light will turn on inside each earphone when charging. The light will turn off when the earphones are fully charged.

Charging the battery case

• To charge the charging case plug the Type-C cable into the charging port of the case, and plug the USB end port to a powered USB AC adapter or computer.

Recommended power is DC 5V/1A.

• This device is also compatible with wireless charging pads. Simply place the case on the wireless charger to initiate charging.

• LED light indicators on the charging case will flash blue while charging. When charging is complete the indicator lights will turn solid blue.

Power Save mode:

• The earphones will turn off automatically after 5 minutes if not connected with any device.

Low Battery

• When the battery level is below 3% you will hear a warning voice message ‘Battery low’. The message is repeated after every 20 seconds.

• After 5 minutes of ‘battery low’ warnings, the earphones will power off automatically.

SPECIFICATIONS

Bluetooth version

Bluetooth chipset

Earphone

Charge box

Bluetooth 5.0 (CVC dual mic noise cancelling)

QUALCOMM QCC3020

120mAhx2pcs (Button cells)

400mAh (Li-polymer battery)

Speaker diameter

Charge time

Earphone working time

Φ 9mm

Earphone: 2 hours

Charging case: 2 hours about 18 hours (based on 70% volume)

Charge box working time 24 extra hours in the charging case

Earphone size 25 x 19 x 23.5mm

Earphone weight

Charge box size

6.5g each

64.2 x 26 x 35mm

Weight

Charging Port

49g

Type-C (or wireless charge)

NOTES

Need more information?

We hope that this user guide has given you the assistance needed for a simple set-up.

For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com