advertisement
User Guide
Version 1.1
FFFA001422
www.focusrite.com
2
TABLE OF CONTENTS
OVERVIEW
Introduction
Thank you for purchasing this Second Generation Scarlett 2i2, one of the family of Focusrite professional audio interfaces incorporating high quality Focusrite analogue pre-amplifiers. You now have a simple and compact solution for routing high quality audio to and from your computer and you will also be able to download some exciting new software plug-ins once you’ve registered the product.
In developing the Second Generation series of Scarlett interfaces, we have enhanced both the performance and feature set including support for sample rates up to 192 kHz, improved mic preamp performance with low noise and plenty of gain, and upgraded instrument inputs with additional headroom for recording the loudest guitar parts without clipping. They are class compliant on Mac, which means they are plug-and-play, so no need to install a driver if you are a Mac user.
This User Guide provides a detailed explanation of the hardware to help you achieve a thorough understanding of the product’s operational features. We recommend that both users who are new to computer-based recording, as well as more experienced users, take the time to read through the user guide so that you are fully aware of all the possibilities that the Scarlett 2i2 and accompanying software has to offer. If the main User Guide sections do not provide the information you need, be sure to consult support.focusrite.com
, which contains a comprehensive collection of common technical support queries.
Features
The Scarlett 2i2 hardware interface provides the means for connecting microphones, musical instruments or line level audio signals to a computer running Mac OS or Windows. The signals at the physical inputs can be routed to your audio recording software / digital audio workstation (referred to throughout this user guide as the “DAW”) at up to 24-bit, 192 kHz resolution; similarly, the DAW’s monitor or recorded output will appear at the unit’s physical outputs.
The physical outputs can be connected to an amplifier and speakers, powered monitors, headphones, analogue mixer or any other analogue audio equipment that you wish to use. Although all inputs and outputs on the Scarlett 2i2 are routed directly to and from your DAW for recording and playback, you can configure the routing within your DAW in order to meet your needs.
3
Box Contents
Along with your Scarlett 2i2 you should find:
• Bundle code* for accessing the following on-line resources:
- 2i2 USB Drivers for Windows
- Focusrite Red 2 & 3 Plug-in Suite
- Pro Tools | First
- Ableton Live Lite
- LoopMasters sample library
• USB cable
• Getting Started Guide and Important Safety Information*
* information printed on the inside of the gift box
System requirements
Mac OS & Windows
For information on System Requirements for the Scarlett and the optional bundled software, please visit: support.focusrite.com
4
GETTING STARTED
IMPORTANT: WINDOWS USERS - PLEASE ENSURE THAT YOU RUN THE INSTALLER
BEFORE CONNECTING THE SCARLETT 2i2 TO YOUR COMPUTER.
THE SECOND GENERATION SCARLETT 2i2 IS CLASS COMPLIANT FOR MACS,
THEREFORE DRIVER INSTALLATION IS NOT NECESSARY.
Software Installation
All software required by the Scarlett 2i2 - and several powerful and useful extras - is available for download from the Focusrite website www.focusrite.com/register . You will find a
“Bundle Code” printed on the inside of the gift box your Scarlett 2i2 comes in, and the Serial number can be found on the underside of the unit. You will need to enter these when you access the downloads area of the website; this procedure ensures that you will have the most up-to-date software versions.
1. Using your usual browser, go to www.focusrite.com/register/ .
2. Follow the on-screen instructions, entering the Serial number and then the Bundle Code
(XXXXXX-XXXXXX-XXXXXX) into the form where prompted. Your Bundle Code is printed on the inside of the gift box.
3. You will then be able to access the “My Products” page, where the software products to which your registration entitles you are available for download, complete with activation codes where applicable.
4. Download and install the Scarlett 2i2 drivers (Windows only). Follow all on-screen instructions.
• When the installation is complete, restart your computer.
• After restart, connect the Scarlett 2i2 to your computer with the USB cable supplied.
This information is accurate as of May 2016, however we are constantly striving to improve the customer experience and as a result this process is subject to change. If anything appears to have changed please refer to www.focusrite.com/get-started for the latest info.
5
Mac OS only:
Your OS should automatically switch the computer’s default audio inputs & outputs to the Scarlett
2i2. To verify this, go to System Preferences > Sound , and ensure that the input and output are set to Scarlett 2i2 . For more detailed setup options on a Mac, open Applications > Utilities >
Audio MIDI Setup .
Windows only:
Your OS should automatically switch the computer’s default audio inputs & outputs to the Scarlett
2i2. To verify this go to: Start > Control Panel > Hardware and Sound > Sound > Manage
Audio Devices and ensure that ‘ Default Playback ’ and ‘ Recording ’ are set to ‘ Scarlett 2i2 ’
6
Connecting your Scarlett 2i2
IMPORTANT - WINDOWS USERS: Before you connect the Scarlett 2i2 to your computer, please complete the software installation according to the instructions
on page 5. This will ensure that the hardware uses the correct drivers, and will
prevent unexpected behaviour.
The Scarlett 2i2 has a single USB 2.0 port (on the rear panel). Once the software installation
(if necessary) is complete, simply connect the Scarlett 2i2 to your computer using the USB cable provided. Note that Scarlett 2i2 is a USB 2.0 device, and thus the USB connection requires a USB 2.0+ compliant port on your computer. It will not operate correctly with USB 1.0/1.1 ports.
Audio Setup in your DAW
The Scarlett 2i2 is compatible with any Windows-based DAW that supports ASIO or WDM and any
Mac-based DAW that uses Core Audio. After installing the drivers (Windows only) and connecting the hardware, you can start using the Scarlett 2i2 with the DAW of your choice. To allow you to get started if you do not already have a DAW application installed on your computer, both Pro Tools | First and
Ableton Live Lite are included; these will be available to you once you’ve downloaded and activated your software on-line. To install either DAW, download and save the desired installer file from your
registered Focusrite “My Products” page as described on page 5, and then run it, following all
on-screen instructions.
Operating instructions for both Pro Tools | First and Ableton Live Lite are beyond the scope of this
User Guide, but both applications include a full set of Help files.
Please note - your DAW may not automatically select the Scarlett 2i2 as its default I/O device. In this case, you must manually select ‘ Scarlett 2i2 ’ as the driver on your DAW’s Audio Setup * page.
Please refer to your DAW’s documentation (or Help files) if you are unsure where to select the ASIO or Core Audio driver. The following example shows the correct configuration in the Ableton Live Lite
Preferences panel (Windows version shown).
7
Once the Scarlett 2i2 is set as the preferred Audio Device* in your DAW, Inputs 1 & 2 and Outputs 1 &
2 will appear in your DAW’s Audio I/O preferences. Depending on your DAW, you may need to enable certain inputs or outputs before use. The two examples below show Inputs 1 & 2 and Outputs 1 & 2 enabled in the Ableton Lite Audio Preferences.
*Typical name. Terminology may differ slightly between DAWs.
8
Examples of Usage
The Scarlett 2i2 is an excellent choice for several different recording and monitoring applications.
Some typical configurations are shown below.
Connecting a microphone or instrument
This setup illustrates the most typical configuration for recording with DAW software on your Mac or
PC. In this case, you might record guitar through Input 1 and vocals through Input 2 into your DAW, while monitoring the playback from the DAW via headphones (or speakers).
9
The front panel input sockets are “Combo” type, which accept either an XLR male connector (you will probably have one on the end of your microphone cable) or a ¼” (6.35 mm) jack plug. If you are using a capacitor (or “condenser”) microphone, you will need to turn on the 48 V phantom power.
Note the Scarlett 2i2 has no “Mic/line” switch – the Focusrite preamplifier stage is automatically configured for a microphone when you plug an XLR into the input, and for a line or instrument when you connect a jack plug. Set the LINE/INST switch next to the socket to INST if you are connecting musical instrument (a guitar in the example) via an ordinary 2-pole (TS) guitar jack, or to LINE if you are connecting a line level source such as a keyboard, synthesiser or the balanced output of an external audio mixer via a 3-pole (TRS) jack. Note the Combo connector accepts both TRS and TS types of jack plug.
Using Direct Monitoring
You will frequently hear the term “latency” used in connection with digital audio systems. In the case of the simple DAW recording application described above, latency will be the time it takes for your input signals to pass through your computer and audio software. Latency can be a problem for a performer who wishes to record while monitoring their input signals.
The Scarlett 2i2 is fitted with a “Direct Monitoring” option, which overcomes this problem. Setting the front panel DIRECT MONITOR control to ON will route your input signals directly to the Scarlett 2i2’s headphone and main monitor outputs. This enables you to hear yourself with zero latency – i.e., in
“real time” – along with the computer playback. The input signals to your computer are not affected in any way by this setting.
When Direct Monitoring is set to ON, ensure that your DAW software is not set to route its input
(what you are currently recording) to its output. If it is, you will hear yourself “twice”, with one signal audibly delayed as an echo.
10
Connecting Scarlett 2i2 to loudspeakers
The ¼” jack outputs on the rear panel can be used to connect monitoring speakers. Self-powered monitors (e.g., typical computer speakers) incorporate internal amplifiers with a volume control, and may be connected directly. Larger, passive loudspeakers will require a separate stereo amplifier; in this case, the outputs should be connected to the amplifier’s inputs.
Connecting active speakers
Connecting passive speakers
11
The line outputs are 3-pole (TRS) ¼” (6.35 mm) jack sockets, and are electronically balanced. Typical consumer (hi-fi) amplifiers and small powered monitors will have unbalanced inputs, either on phono (RCA) sockets, or via a 3.5 mm 3-pole jack plug intended for direct connection to a computer.
In either case, use a suitable connecting cable with jack plugs at one end.
Professional power amplifiers will generally have balanced inputs; we highly recommend using balanced cables to connect these to the outputs of the Scarlett 2i2.
NOTE: You run the risk of creating an audio feedback loop if loudspeakers are active when you are monitoring a microphone! We recommend that you always turn off (or turn down) monitoring loudspeakers while recording, and use headphones when overdubbing.
12
HARDWARE FEATURES
Front Panel
2 3 5 6 8
1 4 7 9
The Front Panel includes the input connectors for Mic, Line and Instrument signals, as well as the input gain and monitoring controls.
1. Inputs 1 & 2 – “Combo” type input sockets - connect microphones, instruments (e.g., guitar), or line level signals via XLR or ¼” (6.35 mm) jacks as appropriate.
2. GAIN 1 and GAIN 2 – adjust the input gain for input signals on inputs 1 and 2 respectively. The gain controls have LED ‘rings’ to confirm signal level: green indicates an input level of at least
-24 dBFS (i.e., ‘signal present’), the ring then turns red when signal level reaches 0 dBFS, indicating digital clipping.
3. 48V – phantom power switch for mic inputs - enables 48 V phantom power at XLR contacts of both Combo connectors.
4. LINE/INST – Line/Instrument level switches for each input – switches gain and input impedance to suit instrument or line level signals.
5. MONITOR – main monitor output level control - sets the output level at the main (rear panel) outputs 1 and 2.
6. USB LED – illuminates when the unit receives USB bus power and is confirmed by the computer as connected and operating correctly.
7. DIRECT MONITOR – allows you to select how you monitor your live recording - either via the
DAW or directly (zero latency).
8. Headphone level – adjusts the output level at the front panel stereo headphone output.
9. Headphone socket – ¼” TRS output jack - connect your stereo headphones here.
13
Back Panel
10 11 12
10. K (Kensington security lock) – secure your Scarlett 2i2 to a suitable structure if desired.
Please see www.kensington.com/kensington/us/us/s/1704/kensington-security-slot.aspx
for further information on how to use this feature.
11. USB 2.0 port – Type B connector; connect to your computer with cable supplied.
12. LINE OUTPUTS: LEFT and RIGHT – 2 x ¼” (6.35 mm) TRS jack sockets; +10 dBu output level
(variable), electronically balanced. Either ¼” TRS (balanced connection) or TS (unbalanced connection) jack plugs can be used.
IMPORTANT - Line Outputs 1 and 2
do not have anti-thump, please make sure you power on your amplifier or monitor speakers last to avoid thumps, pops or clicks when you power on your computer and interface.
14
SPECIFICATIONS
Performance Specifications
Clock Source
Supported sample rates
Microphone Inputs
Dynamic Range
Frequency Response
THD+N
Noise EIN
Maximum Input Level
Gain Range
Line Inputs
Dynamic Range
Frequency Response
THD+N
Maximum Input Level
Gain Range
Instrument Inputs
Dynamic Range
Frequency Response
THD+N
Maximum Input Level
Gain Range
Line Outputs 1 & 2 (balanced)
Dynamic Range
Maximum Output Level
THD+N Outputs (1-2)
Internal
44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz
106 dB (A-weighted)
20 Hz to 20 kHz ±0.1 dB
< 0.002% (minimum gain, -1 dBFS input with
22 Hz/22 kHz bandpass filter)
-128 dB (A-Weighted)
+4 dBu
50 dB
106 dB (A-weighted)
20 Hz to 20 kHz, ±0.1 dB
< 0.003% (minimum gain, -1dBFS input with
22 Hz/22 kHz bandpass filter)
+22 dBu
50 dB
106 dB (A-weighted)
20 Hz to 20 kHz, ±0.1 dB
< 0.02% (minimum gain, -1 dBFS input with
22 Hz/22 kHz bandpass filter)
+13 dBu
50 dB
106 dB (A-weighted)
+10 dBu
< 0.002% (minimum gain, -1 dBFS input 1 kHz, with
22 Hz/22 kHz bandpass filter)
15
Headphone Outputs
Dynamic Range
Maximum Output Level
THD+N
107 dB (A-weighted)
> +10 dBu
< 0.002% (minimum gain, -1 dBFS input, 1 kHz, with
22 Hz/22 kHz bandpass filter)
Physical and Electrical Characteristics
Analogue Inputs
Connectors
Mic/Line switching
Line/Instrument switching
Phantom power
XLR “Combo” type: Mic/Line/Inst (Inputs 1-2) on front panel
Automatic
2 x front panel switches
Shared 48 V phantom power switch for inputs 1 & 2
(XLR connections only)
Analogue Outputs
Balanced outputs
Stereo headphone output
Main output level control
Headphones level control
Other I/O
USB
Front Panel Indicators
USB power
Gain Halos
Phantom power
Weight and Dimensions
2 x ¼” TRS jacks on rear panel
¼” TRS jack on front panel
On front panel
1 x USB 2.0 Type B connector
LED
Colour-coded LED rings (concentric with GAIN controls)
LED (within 48V button)
W x H x D
Weight
145 mm x 45 mm x 115 mm
5.7 in x 1.77 in x 4.53 in
0.60 kg
1.32 lb
16
TROUBLESHOOTING
For all troubleshooting queries, please visit the Focusrite Help Centre where you will find articles covering numerous troubleshooting examples: support.focusrite.com
COPYRIGHT AND LEGAL NOTICES
Focusrite is a registered trade mark and Scarlett 2i2 is a trade mark of Focusrite Audio Engineering
Limited.
All other trade marks and trade names are the property of their respective owners.
2016 © Focusrite Audio Engineering Limited. All rights reserved.
17
advertisement