BAUHN AFWGPS-0720 Smart Watch User Guide

Please read the User Guide

Display

Ingress protection

1.3”, 240 x 240 pixels

IP67

Charging time

3.5 hrs

(approx.)

Charging base input 5VDC, 200mA

Bluetooth Range < 10m

Built-In Battery

Weight

Dimensions (mm)

Li-ion 3.7V

360mAh

60g

49.2(W) x 57(H) x 16.5(D)

AUS

Open the Join Fit app on your smart phone. Once the app is open, follow:

Device > Add device and select the first

“AFWG0720” from the list.

The watch will display the below screen:

Tap on to confirm pairing and once connection is sucessful, the Bluetooth ® icon will show at the shortcut menu.

Open the Join Fit app. Select “Device” and select the paired device and tap

“UNBIND” to disconnect the watch.

On iOS devices, you will also need to open the settings menu on your iPhone.

Go to Bluetooth settings, tap on the “i” icon on the right side of “AFWG0720” and then tap ‘Forget This Device’ to finish disconnecting.

When you wish to end or pause the selected activity, press and hold the power button and then tap on the stop/ pause icon.