SIXIN Air Quality Monitor Instruction manual
Add to My manuals1 Pages
SIXIN Air Quality Monitor measures CO₂, temperature, and humidity. It features a large 1600mAh Lithium battery, a 5V Micro USB charging port, and a low battery warning. The CO₂ range is 400-5000 parts per million (ppm), with an accuracy of ±50ppm. Temperature range is -10 to 50°C (±1°C accuracy), and humidity range is 20-85% relative humidity (±4% accuracy).
advertisement
Air Quality Monitor
Instruction Manual
Product Specifications
Display method:
Common Screen display
Atmospheric pressure: 86Kpa - 106Kpa
Detection method for CO2 : Infrared (NDIR)
Sampling time: 1.5 seconds
Product Size:70*80*35mm
Detection temperature: -10°C to 50°C;
Relative humidity: 20% - 85%
Storage temperature: -10°C to 60°C;
Concentration unit for CO2:PPM
Power source: Lithium battery with 1600mAh capacity;
5V DC power charging via micro USB port
Product weight: 150g
Product Description
This product is an air quality monitor that detects Carbon dioxide (CO2),Temperature, and Humidity. it combines sensors real-time monitoring of Carbon dioxide (CO2), temperature, and humidity on its display.
2
Considerations
Please read the instructions carefully before using this device.
Please let the device work short mins outdoors before use for most accurate results .
Please keep the manual handy for quick reference and troubleshooting.
Precautions
Avoid covering the air intake areas during use to avoid inaccurate measurements.
Avoid use of solvents to clean the product as residual fumes will skew air quality readings.
Avoid water or other liquids near the product to avoid electrical damage.
Do not allow unauthorized modification or repair of this product.
Features:
- Common Screen display
-Test variables:Carbon dioxide (CO2),temperature, humidity
-Large 1600mAh capacity Lithium battery
-5V Micro USB charging
-Low battery warning
3
Instructions
1. Start Up
Press power button to turn device on, and Long-press power button to turn device off.
In the boot state , Single-click power button to recycle switch the brightness of screen(with 6 levels for brightness)
1. Power Button
2. Air Vents
3.USB charging port
4
2. About Charging
When low battery icon is displayed, the device needs to be charged. Insert the included or another compatible micro USB charging cable into the device. Attach the other end to a USB DC charger (such as a smart phone charger) that outputs DC 5V at >=1000mA. Fully charge for at least 2-3 hours before use. Avoid charging with a
USB computer port which only outputs 500mA.
3.Parameters :
CO2 technical indicators
Measuring range: 400-5000PPM
Resolution: 1 PPM
CO2 range
400~1000 ppm
1001~2000 ppm
2001~5000 ppm
Indicator light
Green
Yellow
Red
Sensor for CO2 : Infrared ( NDIR)
Air quality
Good
Normal
Poor
Temperature and humidity technical indicators
Measuring range: -10-50 ° C
Humidity range: 20%-85% RH
Measurement accuracy: ±1 °C
Measurement accuracy: ±4% RH
Product List
Air Quality monitor x 1
Micro USB charging cable x 1
Product Manual x 1
5
advertisement