TurboChef HhB Stacking Instructions

Add to My manuals
1 Pages

advertisement

TurboChef HhB Stacking Instructions | Manualzz

TuRBOCHef TeCHnOlOgIeS, InC.

HhB/HhB 2 Oven Stacking Instructions

The brackets in kit HHB-3229 allow you to stack HhB or HhB 2 ovens. You can also use these brackets to stack your HhB or

HhB 2 oven in combination with a Tornado or C3 oven.

WARNING: Any stacking combinations not specified on

this sheet will result in unsafe conditions.

figure 1: HHB-8316 Bracket WARNING: Never stack ovens over two-high.

1. Ensure the surface can support the total oven weight plus the

intended use. Each HhB/HhB 2: 157 lb. (71 kg), each

Tornado/Tornado 2: 190 lb. (86 kg), each C3: 255 lb. (116 kg).

2. Allow each oven adequate time to cool and then unplug.

figure 2: HHB-8165 Bracket

3. If stacking the ovens on an oven cart, ensure the bottom oven is

bolted to the cart and the wheels are locked. Part number

HHB-8206 can be used to secure the oven to the cart (further

instructions included with kit).

4. Attach the stacking bracket* to the back of the bottom oven:

a. Remove the screws marked with white arrows in Figures 3-5.

b. Orient the bracket as shown in Figures 1-5.

c. Align the stacking bracket holes with the holes on the oven

and reinstall the screws.

* Use the bracket shown in Figure 1 to stack a HhB 2 oven

(without legs) on top of a HhB or HhB 2. Use the bracket

shown in Figure 2 for all other stacking combinations.

WARNING: Never remove the legs or drain pan from an

old-style HhB oven when stacking.

NOTE: If desired, the legs may be removed from the top HhB 2 oven. However, the legs should be remain attached on the bottom oven for stability. To secure the HhB or HhB 2 to an oven cart, use kit HHB-8206 (further instructions provided with kit).

6. Remove the screws from the oven that will be placed on top, as

marked with black arrows in Figures 3-5.

HhB 2 only (legs removed) figure 3: Stacked HhB/HhB 2 Ovens

HhB or HhB 2 (legs attached)

HhB or HhB 2

(bottom oven legs always attached)

7. Place the top oven on the bottom oven.

WARNING: Do not attempt to lift the oven with fewer than

two people. Position at least one person on each side.

WARNING: Do not lift the oven from the front and back or

by the door handle.

8. Align the stacking bracket holes with the holes on the top

oven and reinstall the screws.

figure 4: HhB/HhB 2 on top of C3 figure 5: Tornado on top of

HhB/HhB 2

© 2009 TurboChef Technologies, Inc.

DOC-1193 / Rev A / June 2009

TM

advertisement

Related manuals

advertisement