advertisement
OPERATING INSTRUCTIONS for the heat press
Secabo TC D2
Congratulations on purchasing a Secabo heat press!
Please read these operating instructions carefully so you can start production with your press without problems.
Reproduction of these operating instructions in any form requires the written approval of Secabo GmbH. We reserve all rights to change technical data and product features.
Secabo does not assume any liability for direct or indirect damage resulting from use of this product.
Version 1.2 (22.02.2011)
1 Safety Precautions ................................
................................
................... 2
2 Scope of Delivery ................................
................................
....................
3 Machine description ................................
................................
................
4 Controller ................................
................................
............................... 5
5 Operation ................................
................................
.............................. 6
6 Maintenance and cleaning ................................
................................
.......
7 Recommended Times and Temperatures ................................
....................
8 Technical data ................................
................................
........................
1 Safety Precautions
•
Never reach into the heat press with your hands when it is connected to the power supply, particularly when it is switched on and heated up – danger of severe burns!
• Never open the housing or attempt to modify the machine yourself.
•
In case you are requested by the Secabo customer support to open the heating plate cover, please make sure you are wearing respiratory protection and only touch the contained insulation wool with gloves. Any disposal of the wool must be contained in a closed bag.
•
Ensure that liquids and metal objects do not get into the inside of the heat press.
•
Ensure that the power socket used is grounded. Note that it is only permissible to operate a heat press from a power socket protected by a ground fault protection switch.
• Disconnect machine from power outlet when not in use!
• Never operate the heat press within the reach of children and never leave the machine unsupervised when switched on.
• Ensure that the machine is used only in dry rooms.
2
2 Scope of Delivery
Before starting work, please check whether the following items are all present:
Article Quantity
Heat press
230V connecting cable
1
1
Instruction manual 1
3
3 Machine description c) d) d a) b) e) a) Time and Temperature Controller b) Working table c) Pressure Adjustment d) Slide rail e) Knee lever Open/Close
4
4 Controller
Select settings
“START“
Press button - heating process starts
“STOP“
Press button again - heating process stops
Press briefly: increase value
Press for longer: reset values
Press briefly: reduce value
Press for longer: save values
5
5 Operation
• Use the power cable included in the delivery to connect the transfer press with a 230V power socket.
•
Switch on the press with the flip switch on the back.
•
The small lamp next to “Current Temp“ is on, the current temperature is shown on the display. By pressing “SAVE“ or “CLEAR“ you can choose between “°C“ and ”°F“.
•
Select the individual menu items by pressing ”SELECT“.
•
Set the desired temperature (“Setting Temp.“) and the desired time (“Setting
Time”) by selecting ”SAVE“ or ”CLEAR“. Confirm the entry by pressing “SAVE” for longer.
• Select the "START/STOP" button to start the heating process to the set temperature.
• “Temp. Rising“ will light up.
• When the set temperature is reached, you will hear a signal and the small lamp will light up “Temp. Hold“.
•
Now you can carry out the first transfers. The time clock will start running as soon as the press is closed with the press lever.
•
You will see the time on the display.
•
You will hear a warning signal after the set time has expired.
•
You can regulate the contact pressure by increasing or reducing the leverage by turning the large fixing screw on the upper side of the press. The contact pressure is increased by turning in the clockwise direction. The pressure is reduced by turning in the other direction.
•
No settings can be changed during the pressing process.
•
With each completed pressing process the counter will rise by one, when the stated time has completely expired.
• Reset the counter by pressing “CLEAR“ for a longer moment. Previously select the menu item “COUNTER“ by pressing “SELECT”.
6
6 Maintenance and cleaning
Maintenance work should always be accomplished with the press switched off and cooled down. The plug must first be disconnected from the power socket. Consult
Technical Support before carrying out any maintenance work.
Clean the press regularly with a soft cloth and mild household cleaner to remove adhesive residues etc. Never use scouring sponges, solvents or gasoline!
7
7 Recommended Times and Temperatures
These values are only guidelines; they can vary from material to material and should always be checked before pressing.
170°C - 185°C light-medium 25s
160°C - 170°C medium-high 25s
180°C - 195°C medium-high 10s - 35s
200°C medium-high 150s - 180s
Sublimation on tiles
200°C high 120s - 480s
(depending on thickness of material) light-medium 25s
200°C
200°C
200°C medium 20s - 40s medium-high 30s - 50s high 10s - 50s
(depending on thickness of material)
8
8 Technical data
Heat press
Max. contact pressure
Type
Max. temperature
Max. time setting
Power supply
Ambient conditions
Weight
Dimensions (W x H x D)
TC D2
0° - 50°
250g/cm²
Lineare double plate heat press
260°C
9999s
230V / 50Hz - 60Hz, 1,75kW
+5°C-+35°C/30%-70% humidity
44kg
85cm x 53cm x 41cm
9
Konformitätserklärung
Statement of Conformity
Hiermit erklären wir in alleiniger Verantwortung, dass das unter „9. Technische
Daten“ genannte Produkt mit den Bestimmungen der folgenden EG-Richtlinien und
Normen übereinstimmt:
We herewith declare under sole responsibility that the under „9. technical data“ mentioned product meet the provisions of the following EC Directives and
Harmonized Standards:
EG-Richtlinien / EC Directives:
2006/95/EG Niederspannungsrichtlinie
2006/95/EC Low Volatge Directive
98/37/EG Maschinenrichtlinie (2006/42/EG ab 29.12.2009)
98/37/EC Directive on machinery (from 2009-12-29: 2006/42/EC)
Norm / Standard:
EN 60204-1:2006
Technische Dokumente bei / Technical documents at:
Secabo GmbH, Hochstatt 6-8, 85283 Wolnzach, Germany
Dipl. Ing. Fabian Franke Dipl. Ing.(FH) Bernhard Schmidt
Secabo GmbH, www.secabo.com, Hochstatt 6-8, 85283 Wolnzach, Germany
10
advertisement
Related manuals
advertisement