Quick Reference
Orienting the SMART Board Interactive Whiteboard
Orientation ensures your touch registers accurately when you use the SMART Board
™
interactive whiteboard. If you press the interactive whiteboard with your finger and your cursor appears somewhere other than where you are pressing, orient the interactive whiteboard.
Quick orientation
To orient the SMART Board interactive whiteboard, do the following:
1 Press and hold the On-Screen keyboard and control-click buttons simultaneously until the Orientation screen appears
Pen-tray buttons
Pen-tray buttons
2 Begin the orientation process at the upper left-hand corner of the Orientation screen. Press your finger or pen tool firmly on the center of each cross in the order indicated by the white, diamond-shaped graphic.
The Orientation screen
TIP
: If you are not satisfied with the precision of a particular orientation point while orienting, press one of the pen-tray buttons or the left arrow key on your keyboard to redo the previous orientation point.
Changing orientation settings
Increase the detail of calibration for applications that require more precision.
1 Press and hold the SMART Board Tools icon in the Dock, then select Control Panel
2 In the Control Panel window, press SMART Hardware Settings
3 The SMART Hardware Settings screen opens. Select Orientation/Alignment Settings from the drop-down menu
4 Select Fine (20 Points) and press OK to apply the new orientation and alignment settings
5 In the Control Panel window, press the Orient button to begin the orientation process
© 2008 SMART Technologies ULC. All rights reserved. SMART Board, Notebook, smarttech and the SMART logo are trademarks or registered trademarks of SMART Technologies ULC in the US and/or other countries. Printed in Canada 05/2008.
