Edimax BR-6225n Router Leaflet

BR-6225n

nLite Wireless

Broadband Router

Impressive Data Transmission Rate via IEEE802.11n

Edimax BR-6225n is a high speed solution that complies with wireless IEEE 802.11b/g, and is compatible with

IEEE 802.11n standard. When fine-tuned to operate using the wireless 802.11n technology, BR-6225n wireless data transmission rate can reach up to 150Mbps – a coverage 3 times better than a standard 802.11g/b router.

BR-6225n is truly a high performance and cost-effective solution for your home and small business environments.

Extensive Internet Connection Sharing

With the built in NAT (Network Address Translation) function , the Edimax BR-6225n allows up to 253 wired or wireless clients to simultaneously share an Internet connection.

Remote or Local Management System

Edimax EZView is a new enhanced management system in BR-6225n that allows you to manage your router locally or remotely from the Internet. UPnP compatible devices are automatically detected with information about the device listed in the management interface of the router. Hence, you will be able to directly manage device information such as IP address, bandwidth control, open ports and DMZ.

Flexible WISP ( Wireless Internet Service Provider) Connection Mode

Wireless connection from your broadband router to an ISP’s Access Point is also possible. When the BR-6225n is assigned to perform such task, it repeats the signal from a wireless Internet Service Provider to your home or office, simultaneously allowing connection of both wired and wireless stations to the Internet.

Easy & Multilingual Setup Installation CD*

A unique multilingual Setup Wizard is provided in the installation CD. By simply following the animated installation procedures, connection of your router to the Internet is done within minutes!

Practical Wireless ON/OFF Switch and Hardware WPS ( Wi-Fi Protected Setup ) Button

Edimax BR-6225n features a control button and WPS button on its rear panel. You can easily switch on/off the

Wi-Fi wireless connection and setup a secure wireless network in minutes. When using a wired connection, you can pause the Wi-Fi option by pressing the button without making any extra setting.

* The EZMax Setup CD Wizard only supports Edimax wireless routers.

FEATURES & TECHNICAL SPECIFICATIONS

FUNCTIONS HARDWARE INTERFACE

Supports AP, AP Client, Bridge, Bridge+ WDS and

Universal Repeater modes

Port Triggering for special applications

DDNS and SIP

Virtual Server and DMZ hosting

MAC/IP filter and URL blocking

Static routing

UPnP architecture

VPN Pass-Through (IPSec/PPTP)

Schedule control

WAN

MANAGEMENT

One RJ-45 WAN port

Four RJ-45 Fast Ethernet LAN ports

LED Indicators: Power, Wireless, WAN, LNK/ACT for LAN

3dBi detachable antenna x 1 (RP-SMA Connector)

WPS / Reset button

Switch for wireless on/off

12-language User Interface

Supports Remote Management

Supports EZView Management

System Status and Security Log

(Web Interface)

Firmware upgradeable

SECURITY

Supports WISP connection mode

Supports RJ-45 cable/xDSL modem

WAN protocol: PPPoE/Static IP/PPTP/Dynamic IP/

L2TP/Telstra Big Pond

MEMORY

4 MB NOR Flash

16 MB SDRAM

NAT/NAPT IP Sharing

64/128-bit WEP Encryption and WPA-PSK,

WPA2-PSK security

DHCP Server/Client

QoS for critical operations

SPI Anti-DoS Firewall

INSTALLATION KIT

Multilingual EZMax Setup Wizard

OUTPUT POWER & SENSITIVITY

GAIN

11n: 16 ± 1dBm,

11g: 16 ± 1dBm

11b: 18 ± 1dBm

11n (40MHz): -68dBm,

11n (20MHz): -71dBm,

11g: -74dBm,

11b: -87dBm

HUMIDITY &

TEMPERATURE

10-90% (Non-condensing)

0~45 o C

POWER ADAPTER

DC 12V, 1A

DIMENSIONS

179 (W) x 133 (D) x 25 (H) mm

TYPICAL SETUP DIAGRAM AND RELATED PRODUCTS

CERTIFICATIONS

CE, FCC